|
|
Bovista is the development of a new, individually adaptable enclosure for use in building automation systems and many other fields of electronics.
Three basic sizes, each in white and grey, are available.
The enclosure base can be supplied with or without ventilation. In each case, eight different lid types, with different sizes and shapes, can be fitted to the base.
In addition to a smooth design, the customer can choose between lids with a membrane keypad area, design front or a hinged lid.
To fit the lid, simply snap it onto the base; the constructional design allows for horizontal or vertical fitting.
The enclosure can be fitted to the wall by means of the integrated keyholes in the base or by the snap-on wall fitting plate. In addition, as standard this plate has two cut-outs so that the enclosure can be used in combination with flush-mounted sockets.
In addition to printed surfaces and mechanical processing, ( e.g. for display cut-outs ), BOPLA also offers customerspecific membrane keypads.
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs.
|
|
The wide range of items in this wall enclosure system for use in measurement and control applications is available in 8 basic sizes, each with 6 different designs.
To permit the insertion of mounting plates and PCB's, all designs have vertical and horizontal grooves which ensure optimal unit assembly.
The terminal compartment can be separated from the actual electronics area by means of integrated grooves with separated plates.
In addition, extra protection is possible by using lead seals in the standard though holes.
As required, the enclosure can be mounted on the wall (with the terminal compartment upwards or downwards) by means of the integrated three-point wall fitting. Depending on the design, the enclosure are fitted with Pg rated break points (model RCP...(F)) or metric rated break points (model RCPM...(F)). For minimum order quantities of 500+, the front of the terminal compartment can also be supplied without pre-punchings.
|
|
Often overlooked until the last minute, the terminal box plays an important part of most projects.
Although a price sensitive product, the terminal box is traditionally used in large quantities and needed in a hurry. After reviewing our current range of terminal boxes, we have decided to reduce the number of sizes and options available, and concentrate of a number of core sizes. Our intention is to invest in more inventory, albeit in fewer sizes, so we can offer more product from stock more of the time.
|
|
|
ARETA is not just a Modular cabinet but a complete system, which allows several solutions for the distribution and automation business. Thanks to the well designed orthogonal joint, the cabinet can be mounted in only a few minutes. The mounting operation is restricted only to 8 screws and all the other alloy manufactured accessories (hinges, fixing elements, etc.) are ready to be used. The cabinet profile has been well engineered and the result provides all the safety, strength and modularity standards. Profile and orthogonal joint are welded together using the very latest in laser welding technology.
|
|
The recently developed CUBEx control enclosure product line from R. STAHL now makes it possible to combine compex control and distribution panels into comprehensive, space-saving units. Adds a whole new dimension to individualised and flexible solutions for your applications. Other customer-specified control and distribution panel designs are also possible. The CUBEx system increases the flexibility of your applications and ensures that all internationally recognised installation technologies can be employed. All standard, commercially-available electrical equipment can be installed. The space-saving design of this IIB enclosure enables a mounting distance of just 10 mm between units. Moreover, flameproof enclosures incorporating "D2D" technology enable the direct connection enclosures or terminal chambers are required. CUBEx is the logical next step in the development of IIC tchnology integrated in the renowend 8220 Series. For use in Group IIB hazardous areas in Zone 1 and Zone 2 or Zone 21 and Zone 22.
The main connection switch of the lighting and heating panels CUBEx Series 8264/5-ExV is operated through the side wall via an actuation mechanism. The circuit breakers are fitted on the second mounting level and are actuated via totary drives. As an option it is possible to fit test keys to the ELCBs to make it possible to actuate the back wall of the enclosure for fixing the devices. Cable entry is done directly via tapped holes, wired directly to the switches. For current distribution the original comb type rails are used at the switching units. A typical design allows for 12 or 24 circuit breakers. Different designs upon request.
|
|
We design and assemble electric panels for:
- Driving DC motors with their own drivers and protections
- Startup controls and protections for AC motors
- Panels with converter and synchronized inverter slots
- Commands and signaling for many applications and functions
- Control and automation of many different machines
|
|
GE's industrial-duty switchboard product lines Power Break® II and AV-3 AccessTM
Power Break II (PB) switchboards can house insulated case circuit breakers as mains, ties, and feeders; and low voltage power circuit breakers as mains and ties. AV-3 Access (AV3) provides individual compartments for molded case breakers serving as mains, ties, or feeders.
Feature:
Rugged construction - Designed bus structure (30 cycles )
Fast cycle times
Broad Functionality
Multiple locations
Cost effective design
|
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
|
At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
The one-piece desk is used in simpler applications but still offers an up-to-date technical specification.
These styles have bottom entry gland plates with an adjustable, removable section and an adjustable mounting plate.
Accessories are common to the three styles. The shelf lid of LE-ME and SBA are supplied with gas springs.
The design concept of the PE console allows the installation of racks or monitors and a supplementary casing can be fitted up to the back to increase the usable depth to 500mm.
The cabinet desks are manufactured from pressbent and welded 1.5mm and 2mm sheet steel.
The ZBA control desk range has been manufactured in parallel to the SBA range to meet simpler applications.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
The new concept for applications in measurement, control and automatic control technology.
The design-orientated BOCARD enclosure system is available in 3 basic sizes.
For each size, 2 bases with different heights can be combined with 5 different lid variants. This range of combinations ensures that the enclosure is suitable for an extremely wide range of applications. An additional important feature of BOCARD is the variable terminal compartment, which is an integral part of the design. The terminal compartment can be kept separate from the electronics compartment by means of dividing panels. High parts such as double-deck terminals can also easily be incorporated.
The enclosure with a clear hinged lid or membrane lid provides ingress protection IP 65; all other types provide ingress protection IP 40.
A wide variety of accessories completes the range of products.
As a professional and competent partner in the field of system solutions, in addition to mechanical processing, BOPLA also offers customer-specific membrane keypads or the assembly of complete enclosures including electronic components.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
