|
|
The wide range of items in this wall enclosure system for use in measurement and control applications is available in 8 basic sizes, each with 6 different designs.
To permit the insertion of mounting plates and PCB's, all designs have vertical and horizontal grooves which ensure optimal unit assembly.
The terminal compartment can be separated from the actual electronics area by means of integrated grooves with separated plates.
In addition, extra protection is possible by using lead seals in the standard though holes.
As required, the enclosure can be mounted on the wall (with the terminal compartment upwards or downwards) by means of the integrated three-point wall fitting. Depending on the design, the enclosure are fitted with Pg rated break points (model RCP...(F)) or metric rated break points (model RCPM...(F)). For minimum order quantities of 500+, the front of the terminal compartment can also be supplied without pre-punchings. |
|
Often overlooked until the last minute, the terminal box plays an important part of most projects.
Although a price sensitive product, the terminal box is traditionally used in large quantities and needed in a hurry. After reviewing our current range of terminal boxes, we have decided to reduce the number of sizes and options available, and concentrate of a number of core sizes. Our intention is to invest in more inventory, albeit in fewer sizes, so we can offer more product from stock more of the time.
|
|
| At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com |
|
Bovista is the development of a new, individually adaptable enclosure for use in building automation systems and many other fields of electronics.
Three basic sizes, each in white and grey, are available.
The enclosure base can be supplied with or without ventilation. In each case, eight different lid types, with different sizes and shapes, can be fitted to the base.
In addition to a smooth design, the customer can choose between lids with a membrane keypad area, design front or a hinged lid.
To fit the lid, simply snap it onto the base; the constructional design allows for horizontal or vertical fitting.
The enclosure can be fitted to the wall by means of the integrated keyholes in the base or by the snap-on wall fitting plate. In addition, as standard this plate has two cut-outs so that the enclosure can be used in combination with flush-mounted sockets.
In addition to printed surfaces and mechanical processing, ( e.g. for display cut-outs ), BOPLA also offers customerspecific membrane keypads.
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs. |
|
The recently developed CUBEx control enclosure product line from R. STAHL now makes it possible to combine compex control and distribution panels into comprehensive, space-saving units. Adds a whole new dimension to individualised and flexible solutions for your applications. Other customer-specified control and distribution panel designs are also possible. The CUBEx system increases the flexibility of your applications and ensures that all internationally recognised installation technologies can be employed. All standard, commercially-available electrical equipment can be installed. The space-saving design of this IIB enclosure enables a mounting distance of just 10 mm between units. Moreover, flameproof enclosures incorporating "D2D" technology enable the direct connection enclosures or terminal chambers are required. CUBEx is the logical next step in the development of IIC tchnology integrated in the renowend 8220 Series. For use in Group IIB hazardous areas in Zone 1 and Zone 2 or Zone 21 and Zone 22.
The main connection switch of the lighting and heating panels CUBEx Series 8264/5-ExV is operated through the side wall via an actuation mechanism. The circuit breakers are fitted on the second mounting level and are actuated via totary drives. As an option it is possible to fit test keys to the ELCBs to make it possible to actuate the back wall of the enclosure for fixing the devices. Cable entry is done directly via tapped holes, wired directly to the switches. For current distribution the original comb type rails are used at the switching units. A typical design allows for 12 or 24 circuit breakers. Different designs upon request. |
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling. |
|
The new concept for applications in measurement, control and automatic control technology.
The design-orientated BOCARD enclosure system is available in 3 basic sizes.
For each size, 2 bases with different heights can be combined with 5 different lid variants. This range of combinations ensures that the enclosure is suitable for an extremely wide range of applications. An additional important feature of BOCARD is the variable terminal compartment, which is an integral part of the design. The terminal compartment can be kept separate from the electronics compartment by means of dividing panels. High parts such as double-deck terminals can also easily be incorporated.
The enclosure with a clear hinged lid or membrane lid provides ingress protection IP 65; all other types provide ingress protection IP 40.
A wide variety of accessories completes the range of products.
As a professional and competent partner in the field of system solutions, in addition to mechanical processing, BOPLA also offers customer-specific membrane keypads or the assembly of complete enclosures including electronic components.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Demag introduces Model DC, a new generation of chain hoists. Precision quality with innovative features for added safety and serviceability.
- Plug in electrical connections
- Diagnostic service data
- Integrated 3 axis motion controls
- CSA approved
- 24 volt pendant control voltage
- Cycle and load spectrum monitoring
- Upper and Lower limit switches
- Slip clutch to prevent overloads
- High safety factor for load chain
- Gearbox lubricated for 10 years
- State of the art controls
- Long life low amp switching
- Easily adjustable pendant height
- Pendant or available with remote control |
|
| ... products without technical information |
| |
... see all the products in the category
Hoists
|
Here version SME of the system LockToo Access.
This offer "turn-key" exists in version 100 and 500 users.
Contents of LockToo Box Access:
- 1 biometric Reader LR (impressed only) or LRC (impressed + RFID)
- 1 Software of access control (BDD Access)
- 1 enrolor of office USB for the recording of the prints
- In option for models LRC: Coder of badges USB
Also available:
- LockToo Box Time
- LockToo Box Restaurant |
|
Rittal system climate control offers holistic process protection. This includes the cooling of sensitive electronics in enclosures and cases for industrial process control, as well as server and network technology, regardless of the ambient conditions. But these are not isolated solutions - with Rittal, everything is interconnected. Perfectly linked and controlled cooling technology with eco-friendly, energy-efficient equipment.
From passive air climate control to active liquid cooling of high-performance CPUs, Rittal offers the full range of components and systems. They are designed precisely according to your requirements and application spectrum. Software-assisted planning and calculation of requirements, together with modular, rack-compatible technology, help to minimise investment costs, thereby offering a particularly future-safe solution with a high degree of flexibility. |
|
COMMON FEATURES
Specifically developed for mounting on the wall or door of
electronic enclosures, the air conditioners cover a cooling
capacity range from 330W to 4000W.
Common to all models is the “Selfcleaning” condenser coil which remove the necessity of the air filter, avoiding the ordinary maintenance.
Most models are equipped with Condensate Dissipator (from EVE11).
The standard control is electromechanical, and as option an electronic
one (EBB). |
|
Cooling power : from 360 to 2500 W (L35/L35 according to DIN 3168).
To be fixed either on the front door or side panel or top panel of a cabinet.
Factory pre-set to achieve an average cabinet temperature of 35°C max.
Customer’s advantages :
- One single cut-out for cabinets from 850 to 2500 W.
- Powerless condensation evaporating device.
- Electronic control with alarms and safety values (high pressure, cabinet opened, cabinet temperature, fan and compressor’s thermal breakers).
- Ventilated hermetic compressor.
- Standard spare parts for all models. |
|
This range of rack air - conditioning units for 19-inch cabinets benefits from all our experience in this industrial field.
The depth of 560 mm allows racks of 600 mm to be integrated without any difficulty.
The electrical and refrigerating components of this rack range are the same as those used in vertical and horizontal air-conditioning units. |
|
Switchgear cabinet air conditioning system - ventilation for the switchgear cabinet
19 " - exhaust modules:
Tensions: 12V - 230V
Deep one: 156mm to 660mm
Number of exhausts: 1 - 15
To the avoidance of warming esters in the switchgear cabinet
Circulation fan with swing frames
Tensions: 12V - 230V
To the purposeful ventilation of construction units
Filter exhaust and filter exhaust IP 55
For a switchgear cabinet ventilation with filtered supply air |
|
-Large setting range
-Small size
-Simple to mount
-High switching performance
KTO 011:
Thermostat (normally closed); contact breaker for regulating heaters.
Approvals: UL File Nr. E164102 |
|
-Large setting range
-Small size
-Simple to mount
-High switching performance
KTS011:
Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded.
Approvals: UL File Nr. E164102 |
|
CitectFacilities integrates all your facilities systems, including HVAC, lighting, fire, CCTV and access control, across your entire enterprise to deliver a single facilities monitoring and control solution. The software can connect to hardware devices supplied from multiple vendors, in single or multiple sites.
What does this mean for you?
A single, central view of all facilities systems is essential for property owners and facilities managers:
PROPERTY OWNERS
CitectFacilities provides strategic information that lets property owners reduce facility operating costs and improve tenant service. Existing and future facilities equipment investments are protected and the high scalability provides a low risk, low entry cost option that lets you expand your facilities application according to your business plan.
FACILITY MANAGERS
Facility Managers gain real-time visibility of all facilities systems, including central alarm management, with CitectFacilities. This raises staff productivity and improves responsiveness to tenants. Open protocols and open architecture gives you the flexibility to integrate building automation technology suited to your facility. |
|
| Develop a range of digital cable-TV set-top boxes with Broadcom's extensive offering of chips for cable TV applications. Select from a number of highly integrated chips to build standard digital cable-TV set-top boxes for digital video broadcasting. Broadcom's silicon can also power high-end interactive set-top boxes that merge high-speed Internet access functionality with studio quality graphics, text and video, supporting a range of home communication and entertainment capabilities. |
|
| ... products without technical information |
| |
Lake’s Case Drain Monitor is an affordable option to using a standard flow meter for case drain applications. It offers a flow measuring accuracy of ±5% of range that can help confirm pump performance, identify required maintenance and reduce costly MRO down-time associated with unpredictable pump failure.
Designed for convenient vertical, horizontal and inverted installation, the monitor has a sealed window tube that makes it ideal for outdoor/exposed applications and where wash-downs may be required. And Lake backs its Case Drain Monitor with a One-Year Warranty!
|
|
|
|