|
|
The wide range of items in this wall enclosure system for use in measurement and control applications is available in 8 basic sizes, each with 6 different designs.
To permit the insertion of mounting plates and PCB's, all designs have vertical and horizontal grooves which ensure optimal unit assembly.
The terminal compartment can be separated from the actual electronics area by means of integrated grooves with separated plates.
In addition, extra protection is possible by using lead seals in the standard though holes.
As required, the enclosure can be mounted on the wall (with the terminal compartment upwards or downwards) by means of the integrated three-point wall fitting. Depending on the design, the enclosure are fitted with Pg rated break points (model RCP...(F)) or metric rated break points (model RCPM...(F)). For minimum order quantities of 500+, the front of the terminal compartment can also be supplied without pre-punchings.
|
|
Often overlooked until the last minute, the terminal box plays an important part of most projects.
Although a price sensitive product, the terminal box is traditionally used in large quantities and needed in a hurry. After reviewing our current range of terminal boxes, we have decided to reduce the number of sizes and options available, and concentrate of a number of core sizes. Our intention is to invest in more inventory, albeit in fewer sizes, so we can offer more product from stock more of the time.
|
|
|
Housed in tough ABS boxes and panels these IEC EN60320 Distribution Units have combinations of four, five or six outlets together with neon indicator, fuse and switch options. The three sizes are available in various combinations and, other than the compact version, all have shuttered outlets. The larger enclosed versions are also available with EMI filtering.
|
|
IP67-IP55 ENCLOSURES FOR SOCKETS AND AUTOMATICS SWITCHES
PRYMA Enclosures for sockets and automatic switches are provided plain or equipped with sockets and wiring, in any combination and without minimum order quantities required.
They are sealable, UV protected on windows and also completed with fastening and turning hinges with a locking device to assure their watertightness.
They are made from halogen free long-lasting plastic material. DIN rail can be fixed to the frame, and also, to the base without the need of screws. Holders are included on the enclosure to fix mounting plates and they are ready for earth and neutral bar installation. Cable entries are adapted to the metric system and sockets wiring is carried out under electrical engineering preceptives.
|
|
IP 66 and the exceptionally high stress-resistant qualities of aluminium make this an ideal enclosure line ehen optimal protection is required.
43 different enclosure dimensions and a series of accessories provide the best-possible solutions for a wide range of applications.
On request, the enclosures are available in special colours, or uncoated.
If you require extremely high protection, the enclosures can be fitted with special EMC screening, or coated with special sea-water reststant lacquer. When fitted with hinges and locks, the enclosures are suitable for use as small, sturdy cabinets.
Different lock and hinge systems are available for this purpose.
All Euromas aluminium enclosures are UL-listed.
|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist however particular the task in hand.
|
|
4B INLINE JUNCTION BOX
- For use in Atex zone 20& 21
- Tough moulded nylon body
- Accepts 5 x 2,5mm2 cable cores
- Threaded to take standard M25 glands
|
|
|
Pepperl+Fuchs products are used throughout the world in applications involving industrial, hazardous and corrosive environments. By engineering a complete solution at our own facility, Pepperl+Fuchs is able to offer its world-class products in a variety of panels and enclosures designed and built according to your specifications.
|
|
Junction boxes are used for carrying and distributing electrical power in hazardous areas. They are supplied in different sizes with and without small equipment fuse, and are therefore suitable not only as pure connection and distribution boxes, but also for protecting electrical loads up to 6,3 A. Cable glands in plastic are used as standard cable entries. Bell-mouthed or metal glands can be fitted if ordered. The metal cable entries are connected to the earthing system via brass plates.
Explosion protection to CENELEC, IEC
For use in Zone 1 and Zone 2, Zone 21 and Zone 22
Enclosure in glass fibre reinforced polyester resin
Degree of protection IP 66
|
|
Protection degree is IP65 according to EN50298 NEMA for single door, IP55 for double door.
Four or six studs are welded inside the boxes (with the exception of 150mm depth enclosure), allowing the mounting of both an inner door, a modular chassis, a rack frame or the mounting plate adjustement system.
All the accessories are supplied separately so that to increase flexibility and optimizing finished products inventory.
|
|
wall mounted stainless steel junction box, and Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
Specially designed for placing switches, machine controls, meters and other cases where a high quality and a high resistance are required while keeping an attractive appearance
Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for both inside and outside use due to the advantages of its high resistance to chemical agents and its durability
delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
All models in stock for immedate delivery.
Special solutions:
Built to individual requirements
Stainless steel plinths
Metal legs
Window door
Manufactured in Aisi 316 EN-14401 stainless steel
Top quality electromagnetic EMC protection between frame and contact surfaces, guaranteeing a perfect electrical connection following EEC regulation 89/336.
|
|
St range of wall mounting enclosures is one of the highest quality metallic enclosures available on the market. A well engineered project, which has been continuously updated and improved, has allowed the creation of a wide range of possible variations.
The actual ST range includes the following versions:
- 32 sizes manufactured from Fe40 sheet steel with blank door
- 19 sizes with glazed doors
in both single and double door versions.
ST range main characteristic is solidity obtained thanks to the considerable thickness of the sheet steel to the high technology and automation used for products and to the proper mix of the components.
|
|
Terminal boxes of all sizes and design types provide high dust and water ingress protection at and around cable clamps and other connections. Access protection is designed to ensure electrical and mechanical safety as mandated by the VDE. Terminal boxes are particularly well suited to house small PLCs, so-called intelligent terminal blocks or bus blocks.
- sheet steel housing, powder coated RAL 7032 structure
- narrow chamfer on the body, robust drip rail design
- good overall accessability
- extensive range of accessories
- optional hinged covers with sash fasteners
- foamed PU cover gasket
- foamed PU door gasket / high protection class (>IP 65, EN 60529)
- captive cover screws in plastic sockets
- precise contact pressure due to fixed tap hole depth
- removable cage nuts allow for good accessibility of drillings for wall mounting (even in fully fitted enclosures)
- pre-punched back plane knockouts with blanking plugs
- mounting plate rests on embossed portion when interior profiles are removed
(i.e. clearance is kept for rivet heads)
- removable yellow chromated interior profiles (no doubling of material), variable mounting depth through profile extensions or use of spacer bolts
- zinced support rail or mounting plate makes conductive contact upon installation (excellent conductivity due to copper-plated threaded weld studs)
- also available in stainless steel
|
|
|
At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
Compressed air and electrical outlets within easy reach
The power box provides a simple and safe means of powering:
- pneumatic tools
- blowers
- electric power tools
- and inspection lamps
Suspended from the ceiling at the desired height, power boxes make life easier for operators by avoiding:
- the need to move around the workshop
- hoses trailing on the floor
- tedious operations in the workspace
The built-in handle and hanger makes it easy to grab the box while freeing space at the operator's work position.
|
|
Junction boxes, cabinets and control stations for increased and intrinsic safety EEx e / ed / ia /eia / deia.
Aluminium, polyester and stainless steel (316L). Boxes assembling.
|
|
WISKA COMBI. The Bellied box.
The junction boxes with the distinctive 'bellied' lid provides the utmost in visual and functional perfection.
|
|
Junction boxes are intended for a special - typically swiss - installation technique. It consists in establishing branchings from laid through conductors. The involved material are a baseplate fitted with branching terminals and a cover.
Further junction boxes of thermoplastic, polyester or thermosetting material are available for the same type of application.
|
|
For application under extreme conditions ELEKTRA offer with these products custom-built solutions:
Connection cabinets
Group distribution and main distribution cabinets
Distribution-final distribution cabinets
Connection-distribution-final distribution cabinets
Subcontractor cabinets
Final distribution cabinets
Socket distributors
Small type distributors
|
|
SERIES CUBIK
SCAME proposes with series CUBIK, two new ranges of distribution boxes for electrical installations. They are available in 6 different dimensions. Made out of thermoplastic without halogen, shock-proof and self-extinguishing, the boxes of series CUBIK lend themselves particularly to the use for derivations in tight electrical installations of outside and for housing of small apparatuses.
The technical main features of this series are the following ones: index of protector IP55, possible use between -25 and +60C, of color gray RAL7035, possibility of writing on the interior part of the lid to allow the simpler identification of the circuits, lid with pressure or closing by means of 4 screws 1/4 of lathe. All the lids are unlosable thanks to a provided bond which links base and lid (gone up out of standard). And finally, all the versions are equipped with plugs for complete insulation.
|
|
|
These panel enclosures are designed for supplying electricity to workstations in workshops, mainly for car industry.
|
|
Cases Polyester EExe and EExia
A range of size for all your components E.G. More than 60 versions in more than 20 dimensions. Used for any type of climate.
Available in:
- Cases equipped: terminals, press packings and accessories
- Empty Cases, certification components
- Flask Cases
Certifications:
- ATEX
- GOST
- CHINESE EX
- UL EX
|
|
Material :ABS,PC OR PC+ABS
Temperature arrange:-20 ~ 60
Flammability rating:UL94HB
Most of 20 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
A wide range of size
Designed for mounting P.C.B.or DIN rail mounted terminal
The lid is hinged with the bases, and closed by easy lock
Replacement of solid lid by transparent lid for 20C series
Custom material and color available (Bone as standard color)
|
|
Material :ABS,PC OR PC+ABS
Temperature arrange:-20 ~ 60
Flammability rating:UL94HB
Most of 10 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
A wide range of size
Designed for mounting P.C.B. or DIN rail mounted terminal
Transparent lid is available for most models.
Wall mounting holes and lid attaching screws are outside the sealing area
Custom material and color available (Bone as standard color)
Standard delivery:1 box,1 lid,4 or 6 screws,1 seal
|
|
Bovista is the development of a new, individually adaptable enclosure for use in building automation systems and many other fields of electronics.
Three basic sizes, each in white and grey, are available.
The enclosure base can be supplied with or without ventilation. In each case, eight different lid types, with different sizes and shapes, can be fitted to the base.
In addition to a smooth design, the customer can choose between lids with a membrane keypad area, design front or a hinged lid.
To fit the lid, simply snap it onto the base; the constructional design allows for horizontal or vertical fitting.
The enclosure can be fitted to the wall by means of the integrated keyholes in the base or by the snap-on wall fitting plate. In addition, as standard this plate has two cut-outs so that the enclosure can be used in combination with flush-mounted sockets.
In addition to printed surfaces and mechanical processing, ( e.g. for display cut-outs ), BOPLA also offers customerspecific membrane keypads.
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs.
|
|
Alu-Topline this is the new ergonomic universal concept for desktop applica-tions. Thanks to its innovative enclosure technology and ergonomic lines, BOPLA Gehuse Systeme GmbHs new desktop enclosure provides more opportunities for use in the fields of control and safety technology as well as of data recording and processing.
Alu-Topline can be used both as a table-top and wall-mounted operating panel. Alu-Topline has a generously-sized membrane area to permit the fitting of front membranes or membrane keypads. This new BOPLA enclosure has an ingress protection category of IP 40 as standard, which can be increased to IP 54 by the use of an optional seal. The enclosure is available in two profile heights, and because of the aluminium profile construction, it is variable in length. The profile is in silver anodised. Two ABS design lids, in quartz grey, similar to RAL 7039, or graphite grey, similar to RAL 7024, are available as a profile end.
The handle elements which are integrated in the end covers ensure good handling. Several PCB slots and screw channels make it easy to fit PCBs and mounting plates. The profile can be supplied in a split type for optimal assembly of the electronics. The upper profile can also be turned by 180 and then fitted to the lower profile, which means that the same configuration can be used for both table-top and wall applications.
|
|
|
An extensive range of enclosures and accessories that let you install any voice and data application in any area, be it industrial, services or tertiary sector.
|
|
With BOS-Streamline, BOPLA is introducing a new handheld enclosure whose innovative technology and ergonomic lines create new opportunities for use in the field of mobile data recording and processing. The constructive design permits parallel or inclined arrangement of the half-shells as well as lengthways or crossways use. The enclosure can also be used for graphic-capable displays or as a membrane keypad model with continuous membrane keypad. Depending on the design, ingress protection up to IP 65 is available.
In addition to ensuring ingress protection IP 65, the DI-D decor seal available as an accessory also provides an anti-knock function. If the customer does not require this decor seal, the IP 65 type with fitted round cord seal can be supplied. Individual power supply is guaranteed for all 3 basic sizes by means of the type with a battery compartment. Of course, all BOS-Streamline designs can be adapted to customers individual requirements by means of membrane keypads and displays as well as mechanical processing and printing. As a system supplier, BOPLA offers this all-round service up to the assembly of complete enclosures including electronic components.
|
|
The comprehensive range of boxes for potting electronic assemblies. With special cost advantages for series-type production.
Potted assemblies are protected from shock as well as temperature, dampness and chemical influences. The versions made of Duroplast are not highly resistant to fracture.
|
|
... see all the products in the category
| |
