|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
Beautiful appearance, excellent processing and stability should be guaranteed by material such as High Intensity ABS, PC, AC, and Polyester assured, Flammibility material and Glass 30% annexing material. The products was recognized by the Public Trust International Mark Germany VDE, TUV European Community CE and USA Underwiters Laboratories. The use is convinient for the installation of Terminal Box, the supply Swithchboard, Apparatus Box, electrical power supply and Control Box etc.
HIBOX has a various kinds of terminal box. The dimension is from 190x190x130 to 380x560x180mm. Also these boxes can be customized by cutomer's order. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
PICCOLO range is especially designed to house push buttons, terminal blocks, motor starters and electronic devices. They are also ideal for mounting and protecting process control sensors and switches. PICCOLO range is available in polycarbonate and ABS.
Dimensions range from 110*80*65 mm to 230*140*125 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 4X, 6, 6P, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 6, 6P, 12 and 13; UL 94 HB
|
|
- Internal separation from Form 1 to Form 4B
- Fixed units (FFF)
- Removable units (WFD)
- Withdrawable units (WWW)
Different types of functional units can be mixed within the same assembly or section, in order to efficiently meet requirements regarding continuity of supply, service conditions or budgetary constraints.
|
|
For application under extreme conditions ELEKTRA offer with these products custom-built solutions:
Connection cabinets
Group distribution and main distribution cabinets
Distribution-final distribution cabinets
Connection-distribution-final distribution cabinets
Subcontractor cabinets
Final distribution cabinets
Socket distributors
Small type distributors
|
|
|
The FAMI polypropylene stacking and storage containers have been designed and produced to offer companies rational solutions to their various material storage and handling requirements. First class raw materials, together with detailed structural research are the basis for this top quality product. The wide range of containers is available in five colours to allow the storage of materials in easily recognisable categories.
|
|
|
Made of halogen free, impact resistant, self-extinguishing thermoplastic material. SCABOX junction boxes are designed for power distributionin outdoor installations and for housing relays, timers, connecting strips, etc.
|
|
This enclosure is NE-1515: The dimension is 150X150X90 mm.
We have enclosure from 50X65X55 and 80X82X60 mm
We have a various of this kinds of small plastic enclosures.
Just check them out at www.dsehibox.com
IP66-67, UL 5VA 4X type
-1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation
-Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests.
-Convenient to use for console-alternative rail and button box, mini terminal, signal box, gauge/meter console, communication connection box and etc.
Refer to the general catalogue of HIBOX on Direct-Industry.
|
|
MNX polycarbonate and ABS enclosures utilize world-class injection moulding technology. They are designed to house and protect all kinds of electrical and electronic components in the most demanding applications. The MNX includes more than 260 different variations.
Dimensions range from 100*100*35 mm to 255*180*175 mm.
PC: IP 66/IP 67; IK 08; NEMA 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/IP 67; IK 07; NEMA 1, 4, 4X, 6 (12 and 13); UL94HB
|
|
The compact terminal enclosure
The CombiNorm-Control was designed to hold double-pole PCB connection terminals, and two of its advantages are its compactness and versatility.
The CombiNorm-Control enclosure is supplied in three widths and, depending on the design, can hold up to 16 double-pole terminals. Terminal sockets which are not required can be closed by the use of covers.
Accessories include light guides and adjustment axes for coding switches.
|
|
ATEX
EX enclosures are specially made for use in hazardous environments. They are designed, manufactured and tested to international standards. All certificates, such as ATEX, are issued by the manufacturer under license from a test authority. EX enclosures are made of either aluminium, polycarbonate or polyester.
- Aluminium from 45*50*32 to 600*310*180 mm
- Polycarbonate from 188*188*130 to 558*378*180 mm
- Polyester from 75*80*55 to 405*400*120 mm
AL: (ALX) IP 66; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13
PC: (FEX) IP 66; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
PE: (PEX) IP 66/67; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
|
|
SERIES CUBIK
SCAME proposes with series CUBIK, two new ranges of distribution boxes for electrical installations. They are available in 6 different dimensions. Made out of thermoplastic without halogen, shock-proof and self-extinguishing, the boxes of series CUBIK lend themselves particularly to the use for derivations in tight electrical installations of outside and for housing of small apparatuses.
The technical main features of this series are the following ones: index of protector IP55, possible use between -25 and +60C, of color gray RAL7035, possibility of writing on the interior part of the lid to allow the simpler identification of the circuits, lid with pressure or closing by means of 4 screws 1/4 of lathe. All the lids are unlosable thanks to a provided bond which links base and lid (gone up out of standard). And finally, all the versions are equipped with plugs for complete insulation.
|
|
|
These boxes are for distributing electrical power (maximum 40 KVA) to service industry, craft industry and manufacturing industry buildings: storage warehouses, garages, maintenance hangars, sheet metal workshops, wine cellars ...
|
|
These boxes comply with the norm NFC 15-100 .
They provide optimal protection against electric contacts: differential devices, isolating plastrons and casing.
|
|
|
These panel enclosures are designed for supplying electricity to workstations in workshops, mainly for car industry.
|
|
Base Closure Kit
The closure panels of the base (plinths) allow to choose among a blind, a ventilated floor or cable entry configurations with brush stripes against dust. Side cable entry is also available.
Vented Roof
The vented roof consists of a pre-cabled panel with 2, 3, or 4 fans of the noiseless series. The modularity of the roof's structure allows a mixed housing of blind panels with fans or cable-entry panels; panels can be placed both lengthwise and obliquely to the front of the enclosure.
Shelves Kit
Shelves with several dimensions and for small/large loads are available; shelves can even be fixed to the rear of the 19" frame. For superior requirements a shelf with telescopic slides is available.
...
|
|
STAINLESS STEEL ENCLOSURES LA BUSSIERE
These enclosures are developed for food, chemicals, oil paper, pharmaceutical industries, ..., where it is required a strict hygiene or a high resistance to corrosion. We offer 2 types of polishing : brushed or micronized in stainless steel 304L (316 on request).
|
|
2 types of enclosures are available, PLOMBIERES which is a monobloc enclosure and BLIGNY which allows to give the possibility to take out the back panel to make easier the wiring. These enclosures were designed to be able to receive customized mounting systems thanks to possibilities of steel and isolating modular distribution and accessories. The PLOMBIERES range is composed by 17 references with 7 different heights as the BLIGNY range has 20 references with 3 different heights.
These 2 ranges are completed by a wide range of accessories as the modular chassis, rails for brass terminals, depth adjustable brackets, vertical, width and depth profiles, ...
|
|
MODULAR ENCLOSURES FLEUREY
The FLEUREY enclosures have been designed as a complement of BLIGNY enclosures. They are welded made of sheet steel 15/10. The top and the base have been welded to the vertical pieces of the body giving more rigidity. The back and side panels are easy to install by quick fixing out. Enclosures FLEUREY have got 3 heights, 4 widths and 3 depths which is traduced in 33 types.
This range is completed by a wide range of accessories as the modular chassis, rails for brass terminals, depth adjustable brackets, vertical, width and depth profiles, ...
|
|
Kaedra is the best solution to produce with applications of high requirements a complete installation with combines 3 essential functions:distribution, power supply and electrical control;these enclosures mean natural compatibility and consistency:Kaedra range really lets save time and great flexibility.
Applications
Final LV distribution in outdoors or severe conditions (dust, humidity, heat, public...)
|
|
AS SERIES
Control panels designed for larger construction sites. The ASI series is particularly well suited to industrial construction sites: 400V neutral-free three-phase network.
|
|
CR SERIES
Intended for secondary distribution on construction sites, for the different areas of the construction trade and for dispatching power to different floors of buildings being constructed or renovated.
|
|
Explosion-proof box EExd:
- Integration of your not certified components
- Connection with cases equipped EExe
- Usable in very broad beaches of temperature
For other models, please consult us.
|
|
Cases Polyester EExe and EExia
A range of size for all your components E.G. More than 60 versions in more than 20 dimensions. Used for any type of climate.
Available in:
- Cases equipped: terminals, press packings and accessories
- Empty Cases, certification components
- Flask Cases
Certifications:
- ATEX
- GOST
- CHINESE EX
- UL EX
|
|
Material :ABS,PC OR PC+ABS
Temperature arrange:-20 ~ 60
Flammability rating:UL94HB
Most of 20 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
A wide range of size
Designed for mounting P.C.B.or DIN rail mounted terminal
The lid is hinged with the bases, and closed by easy lock
Replacement of solid lid by transparent lid for 20C series
Custom material and color available (Bone as standard color)
|
|
●Material :ABS,PC OR PC+ABS
●Temperature arrange:-20℃ ~ 60℃
●Flammability rating:UL94HB
●Most of 10 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
●A wide range of size
●Designed for mounting P.C.B.or DIN rail mounted terminal
●Transparent lid is available for most models.
●Wall mounting holes and lid attaching screws are outside the sealing area
●Custom material and color available (Bone as standard color)
●Standard delivery:1 box,1 lid,4 or 6 screws,1 seal
|
|
Material :ABS,PC OR PC+ABS
Temperature arrange:-20 ~ 60
Flammability rating:UL94HB
Most of 10 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
A wide range of size
Designed for mounting P.C.B. or DIN rail mounted terminal
Transparent lid is available for most models.
Wall mounting holes and lid attaching screws are outside the sealing area
Custom material and color available (Bone as standard color)
Standard delivery:1 box,1 lid,4 or 6 screws,1 seal
|
|
THE CP: essential to very undertaken borrowing its energy from a public network, it is in conformity with regulations EDF in term of provisional electric connections. It combines standardized counting and the protection of the personnel for the version high sensitivity.
We have 3 "basic" models equipped with a turntable insulating, of 1 box standardized circuit breaker, 1 site EDF for meter, 1 circuit breaker of differential connection 500mA selective. 6 models high sensibilt supplement the series: it is the same equipment as the basic model with in more 1 differential protection high sensitivity 30mA and of the connecting terminals IP2X.
This box polyester, armed glass fiber, measures 450x350x200 mm or 520x540x300 (according to the models) and is IP43. It can be fixed at the wall and be closed by rectangle EDF. Its door can also be equipped with a base plate tlreport.
Various options are also available.
|
|
THE CGO
This cupboard can be used for requirements in power higher than 36KVA and inferiors or equal to 250KVA. It is essential to the temporary food of the building sites starting from a station MT/BT of public distribution 400V and is in conformity with regulations EDF in term of provisional electric connections.
There exist 12 models various all manufactured out of welded sheet EZ 20/10. We propose 3 dimensions: 1715x1110x450 mm (for mechanical electro meter), 1715x1110x350 for 400A and 1565x960x350 for maximum 250A with a sealing IP53.
It shows the following characteristics: 1 door with key handle (closing 3 points + hasps of cadenassage), 2 handles of rabattablees transport, 1 canopy, 2 welded rings of lifting, shaped DIN welded (for supports of equipment), passage of the cables partly lower through cuttings, feet with anchoring welded (in option: base support on the ground), pre-drilling for lock EDF.
It is composed of the following equipment: 1 site EDF for panel of counting + meter, 4 connections in single-core cable - type U 1000R 2V- between cutting downstream and panel of counting, 1 cutting downstream with visible cut, 1 circuit breaker of adjustable differential connection of sensitivity and temporization, of the connecting terminals IP2X.
Certain option are also available.
|
|
|
|
