|
|
Bovista is the development of a new, individually adaptable enclosure for use in building automation systems and many other fields of electronics.
Three basic sizes, each in white and grey, are available.
The enclosure base can be supplied with or without ventilation. In each case, eight different lid types, with different sizes and shapes, can be fitted to the base.
In addition to a smooth design, the customer can choose between lids with a membrane keypad area, design front or a hinged lid.
To fit the lid, simply snap it onto the base; the constructional design allows for horizontal or vertical fitting.
The enclosure can be fitted to the wall by means of the integrated keyholes in the base or by the snap-on wall fitting plate. In addition, as standard this plate has two cut-outs so that the enclosure can be used in combination with flush-mounted sockets.
In addition to printed surfaces and mechanical processing, ( e.g. for display cut-outs ), BOPLA also offers customerspecific membrane keypads.
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs. |
|
Thanks to its ergonomically angled desktop surface this series of enclosures is ideally suites for us as a desktop or wall enclosure.
In the PD design, the lid contains as standard a recessed display sureface for LCD displays.
The compact desktop design of this system creates good opportunities for use as a enclosure for small keypads, displays or access controls. |
|
Console system
Flexible console system, allows a versatile number of combinations to configure the system to your design. A range of 19" accessories
adds further versatility. Available in both Mild and Stainless steel.
MPC / MPCS, Console combination version, single or double door
In mild steel and stainless steel
MPG / MPGS, Console compact version, single or double door.
In mild steel and stainless steel |
|
| A wide range made up of monobloc enclosures for wall or floor fitting, made in sheet steel painted with polyester resin or manufactured in stainless steel. Combinable modular enclosure systems, ideal for building up large frames and control desks. |
|
The lid stay of the one-piece consoles is locked against unintentional closure.
Maximum space for cable entry with divided gland plates.
The mounting plate is height-adjustable by 2 x 40 mm, e.g. with deep installed equipment in the lid or cable entry from the rear.
Material / Surface finish
Material:
Stainless steel 1.4301
Enclosure: 1.5 mm
Door or double door and console lid: 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure, door and console lid: Brushed, grain 120
Mounting plate: Zinc-plated
Supply includes
Enclosure, solid rear and sides, door or double door at the front, with locking rod, console lid with lid stay and stainless steel cam latched in the enclosure, two-piece gland plate, mounting plate, zinc-plated, passivated.
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
The wide range of items in this wall enclosure system for use in measurement and control applications is available in 8 basic sizes, each with 6 different designs.
To permit the insertion of mounting plates and PCB's, all designs have vertical and horizontal grooves which ensure optimal unit assembly.
The terminal compartment can be separated from the actual electronics area by means of integrated grooves with separated plates.
In addition, extra protection is possible by using lead seals in the standard though holes.
As required, the enclosure can be mounted on the wall (with the terminal compartment upwards or downwards) by means of the integrated three-point wall fitting. Depending on the design, the enclosure are fitted with Pg rated break points (model RCP...(F)) or metric rated break points (model RCPM...(F)). For minimum order quantities of 500+, the front of the terminal compartment can also be supplied without pre-punchings. |
|
Often overlooked until the last minute, the terminal box plays an important part of most projects.
Although a price sensitive product, the terminal box is traditionally used in large quantities and needed in a hurry. After reviewing our current range of terminal boxes, we have decided to reduce the number of sizes and options available, and concentrate of a number of core sizes. Our intention is to invest in more inventory, albeit in fewer sizes, so we can offer more product from stock more of the time.
|
|
| Housed in tough ABS boxes and panels these IEC EN60320 Distribution Units have combinations of four, five or six outlets together with neon indicator, fuse and switch options. The three sizes are available in various combinations and, other than the compact version, all have shuttered outlets. The larger enclosed versions are also available with EMI filtering. |
|
Wall mounting enclosures :
The balance between pure design and total pragmatism is never easy to achieve. The unique Eldon Multi-Mount® enclosure will make your specifi cation and component requirements easier to come up with. Making your enclosure both practical and aesthetically pleasing at the same time.
Floor standing enclosures :
Nowadays, mounting speed is one of essence and Eldon
Multi-Flex® enclosures belong to the fastest you'll fi nd on today's markets. With fewer parts than our previous designs, which means that availability of the parts you need is always high. |
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist – however particular the task in hand. |
|
| This is 9 range of boxes and enclosures able to house from 4 to 16 modules of 18 mm. Depending on the model, they are made in self-extinguishing or metallic material, equipped with DIM rails to incorporate modular equipment and have a wide range of accessories in the case of the CRD-CMD models, such as partial and total mounting plates, busbar supports, reinforced rails, etc that allow for large-scale industrial assembly. |
|
Liebert offers a wide variety of racks and enclosures. From basic to fully integrated and self-contained with air conditioning, UPS and wiring management.
Knurr - Our Knurr 19” racks provide a fully assembled aluminum extruded frame with a patented T Slot, offering many quick mount options. The enclosure is offered in heights of 42U and 47U, widths of 24” and 32” and depths of 40”, 44” and 48”.
Liebert Foundation MCR: The Liebert Foundation MCR (Mini Computer Room) is an air conditioned cabinet with integrated UPS protection and cooling, designed to ensure the long-term viability of IT equipment.
Liebert XDF - is a secured enclosure with integrated high heat density cooling, providing the benefits of big room support in a cost-effective package. Air or water cooled. |
|
| Even in the toughest ambient conditions. Current examples include: Compact, secure technologies for Industrial Ethernet, enabling simple modifications to production procedures. Modular enclosure technology is advantageous in terms of the rapid assembly and adaptation of controllers. At the human/machine interface, your ergonomic requirements are precisely realised with the Command Panel and Industrial Workstations. |
|
Construction:
-Back and side panels manufactured in 1.5mm sheet steel.
-Mounting plate manufactured in 2.5mm sheet steel.
-Door Manufactured in 2mm sheet steel with reinforcing frame.
Finish:
T&J standard cycle thermosetting epoxypolyester powder coating.
-Structure,door RAL 7032 textured finish.
-Mounting plate:RAL 2004 smooth finish(Also available for zinc coated)
Protection degree:IP 55 to EN60 529 NEMA 12.
Supply includeF
-Back and side panels(structure)
-Mounting plate.(Also available without mounting plate)
-4 Mounting plate suppots.
-Front door with reinforcing frame with 4 hinges a 4 point locking system.
-Cable gland plate supplied
-4 Lifting eyebolts |
|
The new CS compact enclosure is the ideal solution for applications where a larger wall mounting box than ETA "ST" range or a smaller free-standing cabinet than ETA "ATB8" range is requested.
Ergonomic design and solid construction are the key features of the CS enclosure, together with the possibility to fit standard ETA system accessories and a large cable entry opening.
This new product line will be offered in 6 single door sizes ranging from 600x1200x400 to 800x1400x400 and 6 double door sizes from 1000x1200x400 to 1200x1400x400. |
|
| Give us your statement of conditions, we have the know-how and experience to wire your electrical cabinets and boxes, whatever the final application. |
|
Rittal Electronic Systems offer "complete know-how" in the field of
electronic packaging
at a high level - up to Level 4.
For CPCI, VME and AdvancedTCA applications.
This means "plug & play" systems for extremely high data throughput levels in telecommunications, in the network and server segment, in
automation, in traffic guidance systems and in medical technology.
System solutions in a modern design, with super-fast backplanes,
with integral power modules and with effective climate control
concepts. |
|
IP 66 and the exceptionally high stress-resistant qualities of aluminium make this an ideal enclosure line ehen optimal protection is required.
43 different enclosure dimensions and a series of accessories provide the best-possible solutions for a wide range of applications.
On request, the enclosures are available in special colours, or uncoated.
If you require extremely high protection, the enclosures can be fitted with special EMC screening, or coated with special sea-water reststant lacquer. When fitted with hinges and locks, the enclosures are suitable for use as small, sturdy cabinets.
Different lock and hinge systems are available for this purpose.
All Euromas aluminium enclosures are UL-listed.
|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist – however particular the task in hand. |
|
Alu-Topline – this is the new ergonomic universal concept for desktop applica-tions. Thanks to its innovative enclosure technology and ergonomic lines, BOPLA Gehäuse Systeme GmbH’s new desktop enclosure provides more opportunities for use in the fields of control and safety technology as well as of data recording and processing.
Alu-Topline can be used both as a table-top and wall-mounted operating panel. Alu-Topline has a generously-sized membrane area to permit the fitting of front membranes or membrane keypads. This new BOPLA enclosure has an ingress protection category of IP 40 as standard, which can be increased to IP 54 by the use of an optional seal. The enclosure is available in two profile heights, and because of the aluminium profile construction, it is variable in length. The profile is in silver anodised. Two ABS design lids, in quartz grey, similar to RAL 7039, or graphite grey, similar to RAL 7024, are available as a profile end.
The handle elements which are integrated in the end covers ensure good handling. Several PCB slots and screw channels make it easy to fit PCBs and mounting plates. The profile can be supplied in a split type for optimal assembly of the electronics. The upper profile can also be turned by 180° and then fitted to the lower profile, which means that the same configuration can be used for both table-top and wall applications.
|
|
| An extensive range of enclosures and accessories that let you install any voice and data application in any area, be it industrial, services or tertiary sector. |
|
Under ATEX, the requirements placed on EX enclosures for use
in explosion hazard atmospheres are high.
For this reason, Rittal refuses to compromise in this area. Enclosure concepts proven a million times over are tailored to the specific Ex requirements.
The results is a series of empty enclosures providing ideal conditions for applications in the chemicals
and petrochemicals industries, in the offshore sector
and in the foods industry. |
|
4B INLINE JUNCTION BOX
- For use in Atex zone 20& 21
- Tough moulded nylon body
- Accepts 5 x 2,5mm2 cable cores
- Threaded to take standard M25 glands |
|
Junction Boxes Series 8102
Explosion protection to
CENELEC
IEC
For use in
Zone 1 and Zone 2
Zone 21 and Zone 22
Equipped with 4 hood type terminals and 1 PE connection
cable diameter range: 2 x 4 mm2, single wire
Robust polyester resin enclosure
Degree of protection IP 66
Junction Boxes Series 8118
Explosion protection to
CENELEC
IEC
For use in
Zone 1 and Zone 2
Zone 21 and Zone 22
Enclosures in glass fibre reinforced polyester resin
Supplied in 3 sizes
with 4, 5 or 8 terminals
with 3, 7 or 6 terminals and integral small equipment fuse on request
Degree of protection IP 66
|
|
Out of the plastic Boxes which are selling at present, it’ s abillty and working efficlency are most excellent, the competitive power is
much higher with the low price same as the level of steel Box.
The products were added the electromagnetic interference(EMI) and preventing substance of the static electricity, and the strong point
was given to the relevant mechanical protection of electricity, electron and etc.
The Uses are possible according to the size such as Small Terminal Box, Signal, Terminal and Pull, Control Box etc.
|
|
Products Instruction
The protection degree:IP 66
The products are available for the installation of Terminal Substitution Rail,Button box,small terminal,Sigal,Relay and Sensor, Communication and joint Box etcD
Temperature range:-40degree~+80degree
ABS:Acrylonitrile Butadiene Styrene
PC:PolyCarbonate |
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating. |
|
Desktop housings are available in different sizes and types. They offer designer aesthetics for interior applications.
Your advantages:
- Generously dimensioned, comfortable control and interface panels.
- Ergonomic shape.
- The PCBs can be fitted on both sides with interfaces that project beyond the actual width of the case.
- Non-slip pads for secure table top applications.
- Easy mounting.
- Comprehensive range of accessories. |
|
With BOS-Streamline, BOPLA is introducing a new handheld enclosure whose innovative technology and ergonomic lines create new opportunities for use in the field of mobile data recording and processing. The constructive design permits parallel or inclined arrangement of the half-shells as well as lengthways or crossways use. The enclosure can also be used for graphic-capable displays or as a membrane keypad model with continuous membrane keypad. Depending on the design, ingress protection up to IP 65 is available.
In addition to ensuring ingress protection IP 65, the DI-D decor seal – available as an accessory – also provides an anti-knock function. If the customer does not require this decor seal, the IP 65 type with fitted round cord seal can be supplied. Individual power supply is guaranteed for all 3 basic sizes by means of the type with a battery compartment. Of course, all BOS-Streamline designs can be adapted to customers’ individual requirements by means of membrane keypads and displays as well as mechanical processing and printing. As a system supplier, BOPLA offers this all-round service up to the assembly of complete enclosures including electronic components. |
|
|
|
