|
|
| The range of moulded endosures is made up of a wide selection of products such as modular boxes, wall fixed cabinets adapted to special applications for buildings, floor fixed for industrial facilities, electrical distribution, public lighting, etc. |
|
The new DIN enclosures IDG-B6 and IDG-B9 arefullv insulated and fulfill the requirements of the machinery and car industry.
The enclosures have the installation width of 105 mm for the IDG-B6 and 157 mm for the IDG-B9. They are designed for easy snap-in assembly on DIN-rails.
Three different versions of the housing cover allow customer specific solutions- There can be used commercial terminals from different suppliers or for matea-ble solutions with terminal plugs the according PCB headers from different suppliers with the according terminal plug headers.For solutions with connectors or terminals on the front side there is a fully closed version available.
The transparent front cover protects displays, Potentiometers or other contol devices on the front side against disadjustment or damages.
Features:
2 installation widths:
IDG-B6:105.0 mm, max. 36 terminals IDG-B9:157.0 mm, max. 52 terminals
Overall dimensions per DIN 43 880, size 1
Mountableto DIN rails per DIN 46 277 und DIN EN 50 022
Various termination options: 5.0/5.08 mm terminal blocks 5.0/5.08 mm; pluggable terminal block; Choice of connector on front cover.
Transparent front cover protects displays and control devices
DIN rail clip pre-assemled on housing base
Choice of colors and custom design available upon request (pending min. volume)
2 smaller installation widths are also available: IDG-B2: 35 mm; IDG-B4: 70 mm
|
|
Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
Consoles
Elegant, functional consoles manufactured in finely polished
Aisi 304 EN-14301 stainless steel, easily accessed whose design allows for an IP55 protection and maximum resistance of IK10.
Upper door with shock absorbers which makes opening easier, with open bottom and hidden hinges.
It comes with a galvanised mounting plate
Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for use both inside and outside, due to the advantages of high resistance to chemical agents and durability.
delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
All models in stock for immediate delivery.
Special solutions:
Custom built to order.
Plinths (page 19).
Metal legs.
Polycarbonate window door.
Manufactured in Aisi 316 EN-14401 stainless steel.
Bakelite isolated or stainless steel mounting plate.
Superior EMC electromagnetic protection between frame and contact surfaces which guarantees a perfect electrical connection. EEC regulation 89/336.
|
|
Construction
Stainless steel enclosure are cially suitable for corrosive environments installations where hygieneis essential in chemical and food industries,etc.
Monobloc watertight AISI304 stainless steel enclosures.Types AISI316(resistant to concentrated acids and halogen based agents)also available on request.
-Mounting plate in 2.5 mm sheet steel zinc coated.
-Hinge in zinc alloy on the body and stainless steel on the door.
Pin in stainless steel.
PROTECTION DEGREE
IP 65 to EN60 529 NEMA 4.
SUPPLY INCLUDS:
Boxes are complete with:
-Mounting plate.
-Package with hardware for earth connection and screws to mounting plate.
-Locking system body in zinc alloy and lever in stainless steel.
|
|
| Stainless steel enclosures are suitable for many environments, such as the chemical, food, pharmaceutical and oil industries. Being one of the fi rst on the market with stainless steel enclosures. Eldon have a long history and experience with this kind of product. |
|
The compact terminal enclosure
The CombiNorm-Control was designed to hold double-pole PCB connection terminals, and two of its advantages are its compactness and versatility.
The CombiNorm-Control enclosure is supplied in three widths and, depending on the design, can hold up to 16 double-pole terminals. Terminal sockets which are not required can be closed by the use of covers.
Accessories include light guides and adjustment axes for coding switches.
|
|
Material
-Enclosure & door: sheet steel 1.2mm till size ST6-820 then 1.5mm
-Mounting plate: sheet steel 1.5mm till size ST6 820 then 2.0mm
Surface Finish
-Enclosure & door: thermosetting expoxy polyester powder coating in textured RAL 7032
-Mounting plate: zinc coated
Protection degree
-IP65 NEMA 4 for single door boxes
Supply includes
-Mounting plate
-gland plate and sealing gasket
-locking system
-screws for earthing
-fixing material
|
|
Stainless steel type Wall Mounted Enclosures, Floor Standing and Suite Enclosures, Desk Consoles, Terminal Boxes, Command Panels and special enclosure models are used in harsh environments or hygienic applications, e.g. in the chemical industry or the food and beverage sector. Their technical properties (high IP class and special EEx design, where applicable) ensure full protection even under extreme conditions (low temperatures, high humidity). Selected accessories complement this range to enable conclusive enclosure solutions.
Stainless Steel Wall Mounted Enclosures, Standard:
- enclosure and door made of 1.5/1.25 mm gauge stainless sheet steel material no. 1.4301
- enclosure fully self-contained
- door fitted with double chamfer along all edges for increased stability
- concealed hinges
- door opens ca. 147°
- door fitted with 4 M6 fastening bolts
- rubber profile along all edges (IP 65 compliant, EN 60529)
- sash fasteners with 3 mm double bit insert
- 2.5 mm sheet steel mounting plate, screwed to fitting profiles
- earthing for enclosure, door, and mounting plate
- 4 drillings in the enclosure's back plane (fitted with plastic blanking plugs) suitable for wall mounting lugs or to be used for direct wall mounting
- outside surface smoothed |
|
| Die cast in aluminium alloy and resistant to atmospheric and marine corrison. These enclosures are ideal for housing sensitive electronic assemblies and eletrical devices in both commercial and industrial environments.Gasketed with foam installing machine for preventing ingress of moisture and dust. Die cast Box's dimension is from 65x60x35 mm to 225x150x80mm. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com |
|
With its ALUBOX series Scame is offering a range of metal products sure to satisfy specific installation requirements in situations that demand a robust product.
With its excellent mechanical resistance and the strength to counter climatic and environmental stresses, the ALUBOX series is particularly well suited to environments that are harsh because of the kind of work carried out there - heavy industry installations, installation right beside a machine, for industrial automation, on board ships, for thermal, chemical and petrol chemical plants - even outside.
The ALUBOX series aluminium junction boxes are suitable for using in environments of major fire risk (CEI 64/8 part 7) and in AD-FT installations according to the specifications of the CEI 64-2 norm. |
|
Key Features:
- Seamless Deep Drawn Construction
- Numerous Trim Heights Available per Housing
- Various Alloys and Tempers Available
- Short Lead Times on Standard Products
- Numerous In-house Capabilities to Modify Your Housing
- Great for Prototyping
- Three Standard Nutplate Configurations Available on Select Housings
ZERO Manufacturing, Inc. is the premier manufacturer of deep drawn aluminum enclosures. Available in over 32,000 pre-tooled sizes. For seamless, draft-free construction in aluminum enclosures look to ZERO.
It all starts with a single sheet of metal. ZERO uses only the highest quality aerospace aluminum alloys. Although we most often recommend aluminum as a durable medium, we also provide deep drawn Products in brass, copper, cold-rolled steel and mu-metal (in select sizes).
Standard lead time is 6-8 business days for all stock items.
Standard lead time is 12-14 business days for all non-stock items.
All non-stock items incur applicable set-up fees. |
|
AUTOMELEC proposes a complete pallet of services for the realization of boxes of electronics and automatism.
These services can go from the design until the realization of the tests:
- Analysis of the needs
- Choice of the components and establishment of the nomenclature
- Provisioning of the components constitutive of the box: wrap mechanical, components of automatism (driving disconnecting switches, protections, departures, relay and contactors, relays of safety, automats programmable, variable speed transmission, connecting terminals, etc...)
- Realization of the electric file with a producing software of CAM of the plans to the format dxf or dwg compatible with all the software of CAM
- Realization of the box installation of and machining
- Wiring in the respect of the standards and according to the specific rules of the customer (color of wire according to tension, type of connecting terminals, etc...)
- Classification and reference mark of all wire
- Realization of the beam of cables external with choice and provisioning of the cables, the sensors (end of the road, detectors inductive, capacitive, optical cells, etc...)
- Realization of the programs automats
- Tests under tension and validation of the functions |
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
FLUSH MOUNTING ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*PREMARKED MODULE COVERS, INTEGRATED ON THE FRAME.
*FRAME SEPARATED FROM DIN RAIL FOR CABLE CONNECTION AND INSTALLATION AFTER PAINTING.
*TRANSPARENT DOOR WITH LOCKING DEVICE ON OPENING.
*ENCLOSURES WITH MULTIPLE HORIZONTAL AND VERTICAL MODULAR COMBINATIONS BY MEANS TO ITEM GR11028.
*MARKED CE
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
SURFACE ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*REMOVABLE FLANGE TO SIMPLY SWITCH HOUSING AND WORK INSIDE THE DISTRIBUTION BOX.
*THE FLANGE ON THE INNER SIDE, NOT VISIBLE FROM THE OUTSIDE, IS PRE -CUT FOR ALL STANDARD TUBE AND CABLE-TRAY DIMENSION.
*THE DIN PROFILE FOR HOUSING THE SWITCHES IS HIGHER OFF THE BOTTOM TO PERMIT ALL TYPES OF WIRING WITHOUT ANY SPACE PROBLEMS.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*IN COMPLIANCE WITH CEI 23-48 -I ED.1995 PRODUCTS MEETING ESSENTIAL REQUIREMENTS OF L.V.D. 73/23/EEC AND FURTHER AMMENDMENTS ( IEC 760 2 ED 1989, AM 1/1994 AND MODIFICATIONS PR. EN60670 )
*MARKED CE AND IMQ.
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST |
|
| A range of truly versatile MCB distribution board systems providing unobtrusive final circuit management solutions for applications up to 200A. The range offers robust TP&N and SP&N distribution boards with an extensive selection of MCBs, RCBOs, RCCBs, switch disconnectors, MCCBs, fuse switch incomers, service centres and modular control and command devices. |
|
Deep Drawn aluminum enclosures are our specialty. Zero Manufacturing perfected the deep draw process, and now we have the largest range of tooling in the world. No matter what the required size and shape, ZERO can handle any deep drawn requirement.
The numerous advantages of deep drawn aluminum products are clear. ZERO uses only the highest grade aerospace aluminum throughout the deep drawing process; these light weight aluminum alloys, known for their strength, are also incredibly resistant to corrosion. Aluminum enclosures provide excellent resistance to breakage and fractures, and optimal protection against water and even salt damage.
In-house customization and modifications are available for all our aluminum products. For seamless, draft-free construction in aluminum enclosures, precision miniatures, or deep drawn cans look no further than ZERO for all your manufacturing needs.
|
|
The robust junction boxes made of plastic stainless steel and light alloy are featured by their friendly mounting and installation capability and their design.
They are fitted with pillar terminals for cable of up to 6 mm2. The practical orientated housing form allows for a problem-free access to the connection
terminals for installation. |
|
INTERTEC cabinets and houses use the sand yielding principle: Outside and interior plants from high-strength GRP (or other material) are connected with an isolating, easy central position from closed cellular PU-foam. This structure has a high surface moment of inertia.
The spectrum of use covers almost any application. Of the insulating cable distributer or factory with attached office, analysis house, radar station up to the mehrräumigen station. Whether in aggressive Industrieatmosphäre or under extreme environmental condition (arctic, sand desert) - there are nahzu no borders.
|
|
MCE - Modular Component Enclosures offer easy-to-use and practical functionality, and are designed to house din rail mounted automation, control and switch gear components. MCE enclosures can be connected to each other with flange openings to build bigger panels. Cable entries are available in all sides. There are 5, 9, 14, 28 and 42 module options available as stock products. Bigger sizes available upon request.
PC: (MCE Control) IP 65; IK 08; UL-94 5V; UL 508
|
|
With our outdoor enclosures we construct cabinet systems, which have been weather tested and are extremely stable. The electronic components used outdoors are optimally protected from wind, rain, heat, cold and vandalism.
Schroff offer two standardised outdoor cabinets: "Modular" or "Unibody". Flexible assembly possibilities are possible with 19"" technology, ETSI or other non-standard accessories. With the EMC version, rubber seals or foam seals, which are combined with a metallic mesh, provide protection to IP55 which can be guaranteed. The seals can be replaced if they are damaged.
The cabinets conform to the guide lines and standards for shock and vibration and are tested to IEC 68-2-6 and -27, plus ETS 300 019 for safety during earthquakes. Climate control is tested to IEC 68-2-1, -2, -14. |
|
| Boxes polyester sealing IP65: dimensions of 300x250x160mm with 600x500x250mm, carries full or transparent, accessories (platinum of assembly, handles, locks, mural feet mounting,...) |
|
Steel enclosure BG Range
- Designed for horizontal and vertical mounting.
- Top coating RAL 7032 - Customer prefered top coating colours on
request. |
|
Logstrup is also a specialist manufacturer of stainless steel enclosures with over 40 years experience.
With specialist design and manufacturing centres in Denmark and Ireland the company can supply according to customers specifications or alternatively provide a full design service from concept generation through to prototyping and full production.
Using the latest 3-D technology the design office generate full 3-D models of all enclosures for approval and can also provide animation of assembly in order to provide the client with the most realistic views of the finished product.
On approval all drawings are downloaded through a CADCAM link to the punching and bending centres. This ensures optimum quality and reduces the risk of human error. |
|
The product weighs approximately 1/4 the weight of an iron box and can be easily installed or moved. The product is free from corrosion, carries superior insulation.
The product has passed waterproof and dustproof tests carried out under rigid quality standards. ( IP 66 -67)
The use is also convenient for the installation of Terminal Substitution Rail, Button Box, Small Terminal, Signal, Relay and Sensor, Communication and Joint Box etc.
Refer to our E-Catalog on Direct-Industry. There are more story. |
|
| Vibra-metrics offers a full line of six through 48 channel NEMA 4 vibration sensor switchboxes which allow safe and speedy data collection in dangerous or inconvenient areas. Since probes are mounted permanently, more repeatable and useful data is gathered, improving your PdM process. |
|
QUICK
QUICK wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS withstanding harsh industrial and outdoor environments. These cabinets are equipped with quick screw covers. Transparent cover options allow easy viewing of installed equipment and indicators.
Dimensions range from 300*200*170 mm to 600*400*270 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
HUMMEL aluminum housing are powder coating-coated from Al SI 12,
silver-grey, similarly ral 7001. The sides and the lower part
the housings are smooth, offer however nevertheless the possibility
To install wall mounting straps and hinges.
Aluminum offers high chemical stability against numerous
Solvent, gasoline or oil and have an expressed
good impact resistant industrial union and heatproof quality.
A further plus of aluminum is its excellent
Recycling ability. |
|
EMV housings made of polycarbonate are inside by a special coating
conductive and from there particularly for the employment in that
Electro-technology conceives, with an excellent EMVSchutz
is demanded.
The cover coating is made of silver silicone. |
|
|
|
