|
|
Junction boxes are used for carrying and distributing electrical power in hazardous areas. They are supplied in different sizes with and without small equipment fuse, and are therefore suitable not only as pure connection and distribution boxes, but also for protecting electrical loads up to 6,3 A. Cable glands in plastic are used as standard cable entries. Bell-mouthed or metal glands can be fitted if ordered. The metal cable entries are connected to the earthing system via brass plates.
Explosion protection to CENELEC, IEC
For use in Zone 1 and Zone 2, Zone 21 and Zone 22
Enclosure in glass fibre reinforced polyester resin
Degree of protection IP 66
|
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
|
|
Desktop housings are available in different sizes and types. They offer designer aesthetics for interior applications.
Your advantages:
- Generously dimensioned, comfortable control and interface panels.
- Ergonomic shape.
- The PCBs can be fitted on both sides with interfaces that project beyond the actual width of the case.
- Non-slip pads for secure table top applications.
- Easy mounting.
- Comprehensive range of accessories.
|
|
With BOS-Streamline, BOPLA is introducing a new handheld enclosure whose innovative technology and ergonomic lines create new opportunities for use in the field of mobile data recording and processing. The constructive design permits parallel or inclined arrangement of the half-shells as well as lengthways or crossways use. The enclosure can also be used for graphic-capable displays or as a membrane keypad model with continuous membrane keypad. Depending on the design, ingress protection up to IP 65 is available.
In addition to ensuring ingress protection IP 65, the DI-D decor seal – available as an accessory – also provides an anti-knock function. If the customer does not require this decor seal, the IP 65 type with fitted round cord seal can be supplied. Individual power supply is guaranteed for all 3 basic sizes by means of the type with a battery compartment. Of course, all BOS-Streamline designs can be adapted to customers’ individual requirements by means of membrane keypads and displays as well as mechanical processing and printing. As a system supplier, BOPLA offers this all-round service up to the assembly of complete enclosures including electronic components.
|
|
The comprehensive range of boxes for potting electronic assemblies. With special cost advantages for series-type production.
Potted assemblies are protected from shock as well as temperature, dampness and chemical influences. The versions made of Duroplast are not highly resistant to fracture.
|
|
Self-extinguishing insulated boxes with double insulation. The bases and opaque lids are in PVC and the transparent lids in polycarbonate. Polished light grey surfaces to RAL 7035.
- Sealing gasket in all models.
- Lid fixing by lodking screws or hinges.
|
|
The OKW small plastic enclosures covers many different fields of application.
OKW products are incomparable in design and, thanks to their high level of technical development, are the ideals solution for comfort-oriented case users who are looking for something special.
Our wide range of services allows us to find fast, cheap, individual solution for you.
|
|
In addition to 16 standard sizes for each type, Alupla and Aluplan 100 give yu the option of low-cost manufacture of special dimensiona for variable use.
Thanks to its stability, this aluminium enclosure is ideal for use as a wall, desktop or mobile unit.
The intelligent designof the side profiles makes it possible to insert PCBs on different levels.
Seals specially designed to the match the enclosure offer protection category IP 65 for dimensions up to 1 m x 1x m.
|
|
The new concept for applications in measurement, control and automatic control technology.
The design-orientated BOCARD enclosure system is available in 3 basic sizes.
For each size, 2 bases with different heights can be combined with 5 different lid variants. This range of combinations ensures that the enclosure is suitable for an extremely wide range of applications. An additional important feature of BOCARD is the variable terminal compartment, which is an integral part of the design. The terminal compartment can be kept separate from the electronics compartment by means of dividing panels. High parts such as double-deck terminals can also easily be incorporated.
The enclosure with a clear hinged lid or membrane lid provides ingress protection IP 65; all other types provide ingress protection IP 40.
A wide variety of accessories completes the range of products.
As a professional and competent partner in the field of system solutions, in addition to mechanical processing, BOPLA also offers customer-specific membrane keypads or the assembly of complete enclosures including electronic components.
|
|
Protection degree is IP65 according to EN50298 NEMA for single door, IP55 for double door.
Four or six studs are welded inside the boxes (with the exception of 150mm depth enclosure), allowing the mounting of both an inner door, a modular chassis, a rack frame or the mounting plate adjustement system.
All the accessories are supplied separately so that to increase flexibility and optimizing finished products inventory.
|
|
wall mounted stainless steel junction box, and Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
• Specially designed for placing switches, machine controls, meters and other cases where a high quality and a high resistance are required while keeping an attractive appearance
• Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for both inside and outside use due to the advantages of its high resistance to chemical agents and its durability
• delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
• All models in stock for immedate delivery.
Special solutions:
• Built to individual requirements
• Stainless steel plinths
• Metal legs
• Window door
• Manufactured in Aisi 316 EN-14401 stainless steel
• Top quality electromagnetic EMC protection between frame and contact surfaces, guaranteeing a perfect electrical connection following EEC regulation 89/336.
|
|
St range of wall mounting enclosures is one of the highest quality metallic enclosures available on the market. A well engineered project, which has been continuously updated and improved, has allowed the creation of a wide range of possible variations.
The actual ST range includes the following versions:
- 32 sizes manufactured from Fe40 sheet steel with blank door
- 19 sizes with glazed doors
in both single and double door versions.
ST range main characteristic is solidity obtained thanks to the considerable thickness of the sheet steel to the high technology and automation used for products and to the proper mix of the components.
|
|
- quality sheet steel, body 1.25-1.5 mm gauge (depending on model), door 1.5 mm gauge
- zinced mounting plate, 2.5 mm gauge
- surface protected by powder coating, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 140°/180° to the right, DIN compliant
- available in many sizes, pre-configured ready for use
- sash fastener 3 mm double bit (bar lock for 1200 mm or taller models), can be exchanged for any other common lock system
- zinced mounting plate provides basic EMV protection
- cable entry through sheet steel bottom gland plate
- rail systems, glazed doors, wall mounting lugs, locking systems and other accessories available as listed in Accessories for Wall Mounted Enclosures or on request
- Wall Mounted Enclosures also available in stainless steel
|
|
- principal design based on extremely strong, chamfered and welded sheet steel construction
- 1.5 mm body, 2.0 mm door and back plane sheet steel
- zinced mounting plate, 3 mm zinced sheet steel
- powder coated, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 120°
- sash fastener with 3 mm double bit
- removable back plane
- sturdy two-piece bottom plates
- auxiliary components like plinths, wall mounting lugs, transport units, different locking systems and other accessories available as listed in Accessories for Floor Standing Enclosures, System Accessories, and on request
|
|
Terminal boxes of all sizes and design types provide high dust and water ingress protection at and around cable clamps and other connections. Access protection is designed to ensure electrical and mechanical safety as mandated by the VDE. Terminal boxes are particularly well suited to house small PLCs, so-called intelligent terminal blocks or bus blocks.
- sheet steel housing, powder coated RAL 7032 structure
- narrow chamfer on the body, robust drip rail design
- good overall accessability
- extensive range of accessories
- optional hinged covers with sash fasteners
- foamed PU cover gasket
- foamed PU door gasket / high protection class (>IP 65, EN 60529)
- captive cover screws in plastic sockets
- precise contact pressure due to fixed tap hole depth
- removable cage nuts allow for good accessibility of drillings for wall mounting (even in fully fitted enclosures)
- pre-punched back plane knockouts with blanking plugs
- mounting plate rests on embossed portion when interior profiles are removed
(i.e. clearance is kept for rivet heads)
- removable yellow chromated interior profiles (no doubling of material), variable mounting depth through profile extensions or use of spacer bolts
- zinced support rail or mounting plate makes conductive contact upon installation (excellent conductivity due to copper-plated threaded weld studs)
- also available in stainless steel
|
|
|
At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
Compressed air and electrical outlets within easy reach
The power box provides a simple and safe means of powering:
- pneumatic tools
- blowers
- electric power tools
- and inspection lamps
Suspended from the ceiling at the desired height, power boxes make life easier for operators by avoiding:
- the need to move around the workshop
- hoses trailing on the floor
- tedious operations in the workspace
The built-in handle and hanger makes it easy to grab the box while freeing space at the operator's work position.
|
|
NOTE: All enclosed switches come with a black handle. However, most handles can be substituted with a red/yellow handle. Please substitute the handle suffix code (1st and 2nd from last characters) with the red/yellow handle catalog number suffix listed in the table to the left. There is no additional cost for a red/yellow handle of equal rating and style.
EXAMPLE: A red/yellow selector handle for an ENF161-3PBJ can be substituted for the black selector handle by using the "YJ" suffix instead of the "BJ" suffix, new catalog #ENF161-3PYJ.
|
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures. The enclosures dimension start from 50X65X55 to 600X800X280 mm and DSE have 400 kinds of enclosures-! Refer to the gereral catalogue of HIBOX in Direct-Industry or www.dsehibox.com
|
|
Functional units are classified by their level of compartmentation and type of electrical connection. An extensive range of standard parts offers complete freedom in design:
- Internal separation from Form 1 to Form 4B
- Fixed units (FFF)
- Removable units (WFD)
- Withdrawable units (WWW)
Different types of functional units can be mixed within the same assembly or section, in order to efficiently meet requirements regarding continuity of supply, service conditions or budgetary constraints.
Due to the complete modularity of the system, the physical dimensions of the functional units can be varied in all 3 axes. This allows complete optimisation of design with respect to the overall dimensions of the assembly, heat dissipation, service and maintenance.
Electrical equipment from all manufacturers may be fitted in accordance with the customers' preferences.
To secure the overall safety level of the assembly all components are manufactured from steel or high grade polymer to resist the spread of fire.
|
|
|
It is largest of electric box and the selection range was made more expensive, and it was New technology of the plastic Box. Big Box selected and supported by the packing development institute of industrial design. Through the use of special waterproof and dustproof tests, contained parts are protected well. The use is simple as big type Sensoe, Relay Box, Sleeve, Power Water Tool Box, Junction Box and Control Box. The dimension is 600x800x120 mm. All of the products are waterproof and dust-free. (IP66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged.
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures.
DSE Electronic Box has been developed to protect electrical and electronic components in wet, dusty, and hazardous environments.
|
|
SOLID range is an excellent choice to house electronic and electrical components. It is also an ideal alternative to polyester enclosures. It is available with screw and hinge covers in both polycarbonate and ABS.
Dimensions range from 188*188*130 mm to 558*378*180 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 3, 3S, 4, 4X, 6, 6P and 12; UL-94 5V; UL 508
ABS: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13; UL 94 HB
|
|
|
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
Junction boxes, cabinets and control stations for increased and intrinsic safety EEx e / ed / ia /eia / deia.
Aluminium, polyester and stainless steel (316L). Boxes assembling.
|
|
CAB
CAB wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS withstanding harsh industrial and outdoor environments. These cabinets are produced with hinged covers. Transparent cover options allow easy viewing of installed equipment and indicators. Glass fibre reinforced polyester cabinets are also available.
Dimensions of CAB PC/ABS range from 150*150*110 mm to 600*400*220 mm. Dimensions of CAB P range from 315*215*170 mm to 1030*835*300 mm.
PC: IP 65; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL-94 5V; UL 508
ABS: IP 65; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
P: IP 66; IK 10, T:IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V
|
|
WISKA COMBI. The Bellied box.
The junction boxes with the distinctive 'bellied' lid provides the utmost in visual and functional perfection.
|
|
Junction boxes are intended for a special - typically swiss - installation technique. It consists in establishing branchings from laid through conductors. The involved material are a baseplate fitted with branching terminals and a cover.
Further junction boxes of thermoplastic, polyester or thermosetting material are available for the same type of application.
|
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. E | | |