|
|
DIN-MODULAR CASES TYPE A:
The DIN-MODULAR CASES TYPE A differ from conventional systems for mounting control panels complying with DIN IEC 61 554 through simple, screwless assembly of all case parts. This reduces production work and ependiture to a minimum. A further advantage of this design principle is the implementation of flexible case lengths to match the application exactly.
DIN-MODULAR CASES TYPE B:
THE DIN-MODULAR CASES TYPE B is available in 3 different case designs.
- For horizontal slide-in mounting of PCBs from the front, there are closed cases with removable front frame and rear panel.
- Versions with separate lids allow vertical and horizontal slide-in PCB assembly.
- A special version for 19" racks rounds off the comprehensive range. |
|
Mobile enclosures are one of the main areas in the developement of new products at OKW. This makes it possible for us to present to you the whole variety of our system.
Depending on the type, the cases are already prepared for the use of standardised LCD and graphics displays, standard batteries and rechargeable batteries, PCMCIA cards, switches and membrane keyboards.
Mobility and ergonomics:
The working world is becoming increasingly mobile. We at OKW have made it our goal to offer you the cases to make this possible, with optimum user-friendliness and functionality. In the development of new solutions, therefore, design and product ergonomics are the main focus.
Design for people:
Attractive, high-quality, up to date. We use design-oriented case technology to create the basis for an increase in the value of your products.
Love to details:
- high-quality surface for the visual and tactile senses
- polished front surface for optimum efficiency level with infrared versions
- combination of different plastic material for improved touch sensation and protective function
- innovative technology
- the same aesthetic standards for cases and accessories for a harmonious whole |
|
This hand-held enclosure series made of ABS combines ergonomic design, flexibility, all to the user's advantage.
The unified design concept which range over 6 sizes in combination with cover caps in various colours gives any electronics individualised good looks. BOPLA-ARTEB offers different possibilities for individual voltage supplies to suit your enclosure application.
With 4000 possible combinations, the BOPLA-ARTEB-series is perfect for dealing with customer-specific requirements. |
|
The comprehensive range of wall-mounting cases offers you a wide choice.
Application-specific orientation is typical for each family of cases
Your advantages:
- Ergonomic operating area.
- Practical for service personnel.
- Without/with separate terminal compartment.
- Robust construction.
- Modern design.
- comprehensive range of accessories.
|
|
BOS Ecoline combines the advantages of aluminium profiles with the optimal cost effectiveness of plastic of plastic caps to create a superior enclosure concept. Different sizes and profile types permit use with an extremely wide range of electronic products.
Four cross-section formats are available, each in a closed, open-on-one-side or divided version. The robust aluminium profiles are available in each size and design in three standard lengths ex-warehouse.
Plastic caps, with or without integrated wall brackets, are available as end elements. Depending on the profile type, ingress protection category IP40 can be increased to IP54 by means of a seal set.
As a system supplier, in addition to mechanical processing, BOPLA can supply customer-specific membrane keypads and the assembly of complete enclosures including electronic components.
|
|
BOTEGO, BOPLA´s enclosure system, sets new standards in enclosure technology.
Thanks to its design, the enclosure, consisting of two plastic half-shells, can be inserted either horizontally or vertically.
Extension sets permit optimal adaptation to the relevant space requirements.
The ergonomically shaped operating front permits user-friendly operation of the equipment.
The ergonomically shaped operating front permits user-friendly operation of the equipment.
In order to achieve natural convection everywhere in the enclosure, the system was developed in such a way that sections with air vents can be mounted directly over each other or also staggered.
The snap-lock technology, which considerably reduces the amount of mounting time and work needed, is a new technological development.
With BOTEGO, every user can create his or her own individual design. Different design elements and caps in 6 different colours can modify the basic neutral enclosure to create an individual touch.
All the elements which vary the design are available ex works.
For enclosure surface designs, BOPLA offers both standard decor foils and customer-specific foils-shape, colour or embossing can be selected individually. |
|
With Alurail, BOPLA has developed a modular DIN rail enclosure which is especially suitable for use in measurement, control and automatic control technology. Basic profiles, each in 8 standard lengths, are also available.
A spilt basic profile which facilitates PCB installation can also be supplied. In addition to the front panel, customerspecific circuit boards can also be inserted into the basic profile as a front end elements. Individual design of the enclosure construction is made possible by the clipping on and screwing of different module types in various lengths onto the basic profile.
The anodised basic profiles and modules are equipped with integrated guide grooves for one or more circuit boards. If required by the customer, the basic and module profiles can be supplied in special lengths.
In addition to the fitting of the enclosure onto a mounting rail ( 35 mm ) acc. to DIN EN 60715 TH35 (prev. DIN EN 50022), the enclosure can also be fitted direct to the wall. The fitting element required for this purpose is available as part of the Alurail accessories programme. As a system supplier, in addition to the matching connection terminals BOPLA also offers customer-specific membrane keypads and all the necessary processing work at low cost and from a single source.
|
|
The LDG-S serie of enclosures are fully insulated enclosures according to the specifications of the machinery and the auto motive industries.
Designed for easy snap-on assembly onto DIN-rails by integrated snap-on clip. These enclosures facilitate economical device assembly with optimal utilization of space. For the termination of the conductors of the cable 2 enclosure versions are availible:
- pluggable terminals for easy servicing and exchange (commercial pin headers on the pcb.
- screw terminals for a fixed termination of the conductors. For effective heat dissipation the LDG-S enclosure features a base part with integrated ventilation slots. Closed versions (without ventilation slot) are availible upon request.
Features:
2 installation widths: LDG-S2: 22.5 mm; LDG-S4: 45 mm.
Options for the termination of the conductors:
LDG-S2: 4 screw terminal blocks with 4 terminals each or 4 pcb headers with 4 pin contacts each for connecting cable cnnectors with 4 pins.
LDG-S4: 8 screw terminal blocks with 4 terminals each or 8 pcb headers with 4 pin conacts each for connecting cable connectors with 4 pins.
Easy snap-on assembly on DIN-rails according to DIN EN 50 022
Easy assembly of the enclosure achieved by snap-in design of the two base part and the top part
Transparent housing cover with the option for a label
Customized colors and versions upon request |
|
OKW offers a comprehensive range of cases for DIN rail mounting. All types are extremely installation-friendly, for mounting components as well as for connection work!
Your advantages:
- Different connection options for commercial components such as terminals, PCB plug headers and front connectors.
- Without/with integrated connection system.
- Without/with ventilation slots.
- Different sizes following DIN 43880, unit 1.
- Suitable for DIN rails EN 60 715. |
|
DIDO-S distribution boards are available in two types: surface mounted and flush mounted boards.
Particular attention has been set to the need to give more space in the inside in order to facilitate the operations of
wiring therfore favoring the simplicity of instalation.
PE4, PE8 and PE12 boards have a particular system to fix the DIN rail; it allows to regulate its height in two positions, an
inner and an outer.
Some Flush mounted boards (CMR) answering the demands of space saving products - more compact enclosures.
All distribution boards have DIN rail and brass terminal block (earth and neutral).
The particular structure of the lid, limits the board prominence from the wall of only 20 mm, creating a product of
discrete design and presence.
The interchangeability among the doors (transparent and opaque) and their reversibility together with the large
space for the assembling make these series very versatile.
Always careful to the demands of the clients, all products are protected with a thermo-retracable film. |
|
The enclosure line with IP 65 ingress protection, manufactured using high-quality polycarbonate or lower-priced ABS, offers optimal protection for your components.
The polycarbonate (M...) enclosures are UL-listed.
36 different enclosure sizes and a wide range of accessories permit the fitting of products from terminals (available as accessories) to high-value electronics. |
|
Schlegel and DUX enclosures offer much space inside safeguarding your control units and terminal blocks to an optimum. The enclosures are made of plastic or aluminium alloy casting.
The varied types allow to find the right enclosure for every application. |
|
| VCC's HMS panel lens has been designed to display printed circuit board mounted 10mm LEDs. The unique feature of the HMS low-profile lens is its special threads. Each mating component is designed with six single-entity threads. The six individual threads allow for multiple mating entry points between the lens and the retaining ring. In addition, the amount of rotation required to secure the assembly is only a one-half turn. HMS mating components have a unique thread cross-section design that eliminates over-tightening- a typical cause of thread stripping of plastic mating parts. Any attempt to over-tighten the HMS will result in the retaining ring sliding into a previous thread without damaging either component. The unit can then be retightened to a secure position. The assembly is installed by hand, eliminating the necessity of tools. A specifically designed compression seal serves to provide both moisture and dust protection for the HMS. |
|
INTERTEC instrument enclosures are made of long fibre reinforced polyester (GRP) in sheet moulded compound design. The enclosures are very strong and have an excellent chemical resistance. They are therefore preferred in chemical industry and raffineries.
INTERTEC offers worldwide the largest range of instruments enclosures as well as the corresponding mounting systems. |
|
Ex e Technology "Increased Safety"
Standard Lighting and Heating Panels Series 8146
EEx e Enclosures in Moulded Plastic Series 8146
EEx e-Enclosures in Metal Series 8125
Ex d Technology "Flameproof Encapsulation"
EEx d Enclosures Flameproof Encapsulation
Standard Applications with EEx d Enclosures Flameproof Encapsulation Series 8225
Standard Motor Starters Series 8225
EEx d Enclosure System in Sheet Steel Flameproof Encapsulation Series 8225
Standard Applications with EEx d Enclosures in Light Metal Flameproof Encapsulation CUBEx Series 8264
Lighting and Heating Panel CUBEx Series 8264/5-ExV
EEx p Control Panels Pressurized Apparatus
Explosion protection to
CENELEC
IEC
Can be used in Zone 1 and Zone 2
Meets standards
EN 50 014
EN 50 016
EN 50 018
EN 50 019
EN 50 020
The range includes
complete control and distribution panels to the pressurized protection standard EEx p
empty enclosures for equipment to the EEx p protection standard, complete with fitted components including control device, air supply and pressure monitoring unit
individual components protected to pressurized standard EEx p
Pressurized apparatus
with leakage compensation
with continous circulation of protective gas
|
|
Terminal Boxes Series 8118
Terminal Boxes Series 8125
Terminal Boxes Series 8146
High Voltage Distribution Box Series 8125
Cable End Boxes Series 8146
Isolating Terminal Series 8082
|
|
INTERTEC cabinets and shelters are designed as sandwich constructions with inner and outer skins made from very strong GRP skins - or other materials such as aluminium sheet or stainless steel - and a core of closed cell light weight and insulating PU foam. This construction ensures high strength and rigidity and is unaffected by environmental influences.
The design spectrum covers nearly every application case, from an insulated cable distribution cabinet through Analyser House or Radar Equipment Shelter to a complete - even multi-storey - utility building with attached office. Whether in aggressive industrial atmosphere or extreme environmental conditions of the arctic or the desert - there are nearly no limits.
|
|
Thanks to their versatility and the comprehensive range of accessories, these robust, attractive enclosures can be used for a wide range of applications.
With its eye-catching visual design, which includes seals as a design element, it makes any electronic components look good.
ALUBOS enclosures are available with profiles which are closed, divided horizontally, and open on one side.
The lengths of all profile types are so variable that the result is a universal, ergonomic, individual hand-held enclosure in your special design.
Ingress protection up to IP 65, the high mechanical loading capacity of the profile and good EMC screening ensure a high level of protective functions even in the standard design.
|
|
This highly adaptable ABS hand-held enclosure system is available in grey or black, depending on the design.
Each enclosure type provides different equipment features and accessories, so making it easy to find the ideal enclosure for use with a wide range of mobile data collection and processing applications.
|
|
- Resistant to high-pressure cleaning
(protection category IP 69K). The seal lies between two surfaces and is ideally compressed by the screw fastening
- Suitable for clean room use.
Optional screw fastening to comply with high standards in the food and hygiene sectors:
external with hex screws,
internal with plastic stoppers.
- Optimum EMC conditions.
The labyrinthe seal achieves a particularly high level of RF shielding of the enclosure.
- Accessibility.
Internal rear panel bracket. This solution is clearly superior to external hinges from a hygiene point of view.
- Wall mounting can be implemented directly from the rear using M8 pull-in nuts, or from the front using wall mounting brackets. |
|
Areta Multiple doors
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating.
Areta modular
Using the structure of a standard Areta cabinet it is possible to create modular internal systems for the LV Power distribution.
Specific mounting kits allow the fitting out of:
- Inner front with panels or doors including locking system with no extractable screw.
- Split cubicles adjustable in depth according to the different dimension of the devices to be installed.
The Areta modularity together with a special union system make possible the joining of different modules.
|
|
A range of cabinet with multiple doors for the LV Power distribution created on the Areta structure.
Specific mounting kit allows the fitting out of:
- Front with door modules complete of with a self-lining locking system.
- Split cubicles with mounting plate adjustable in depth.
The Areta modularity together with a special union system make possible the joining of different modules.
The Areta multiple doors cabinets are supplied mounted, for this reason in case of order please specify the door disposition and the opening direction.
Protection degree: IP 55, according to EN60529.
Paint finish: Eta standard epoxy polyester powder coating. |
|
Aisi 304 EN-14301 stainless steel cabinet. Strongly built and designed for outside use. Manufacture in monobloc with embedded door, handle operated with officially approved seal.
Its design, finish, degree of protection specially suitable for urban use, street lighting all kinds, for electrical and electronic equipment telecommunications (ICT, TV, RDSI, RT, TB, TLCA,...). Complies with all current legal requirements.
Its monobloc manufacture allows for IP65 protection and a maximum resistance of IK10. certificate NEMA 4x, by UL.
Self ventilating protective roof attached with optional plinth, high resistance in embedded doors and vandal proof.
Includes galvanised mounting plate.
Follows EC regulations.
Special solutions:
Plinths for any size allowing cabinet to be raised 100 to 200 mm. from floor level and so providing extra space for cables.
Manufactured in Aisi 316 EN-14401 stainless steel
Controlled maximum door aperture
Bolts for fixing to floor
Anti-graffiti treated
Top EMC electromagnetic protection between frame and contact surfaces, guaranteed perfect electrical connection. EEC regulation 89/336.
|
|
Aisi 304 EN-14301 stainless steel cabinet for street lighting. Strongly built and designed for outside use. Manufacture in monobloc with embedded door, handle operated with officially approved seal.
• Its design, finish, degree of protection specially suitable for urban use, street lighting all kinds, for electrical and electronic equipment telecommunications (ICT, TV, RDSI, RT, TB, TLCA,...). Complies with all current legal requirements.
• Its monobloc manufacture allows for IP65 protection and a maximum resistance of IK10. Self ventilating protective roof attached with optional plinth, high resistance in embedded doors and vandal proof.
• Includes galvanised mounting plate.
Follows EC regulations.
Special solutions:
• Plinths for any size allowing cabinet to be raised 100 to 200 mm. from floor level and so providing extra space for cables.
• Manufactured in Aisi 316 EN-14401 stainless steel
• Controlled maximum door aperture
• Bolts for fixing to floor
• Anti-graffiti treated
• Top EMC electromagnetic protection between frame and contact surfaces, guaranteed perfect electrical connection. EEC regulation 89/336. |
|
Uniplast range: The answer to your needs for a permament and safer protection of your electrical or electronic systems
Insulating, compact or modular system of enclosures that permits the construction of many different con·gurations, from a plain door to a transparent door, a single or double door and multi-compartment switchboard, effective even under the most severe working conditions.
It complies with the principal of "double insulation", which guarantees the maximum safety to the operating personnel.
The high quality of the material chosen for the construction of these enclosures is tested according to UL norm UL746C§26 "Ultraviolet Light Exposure".
Practice tests in a moderated climate have shown that the polyester enclosures are resistant against outdoor use and aggressive chemical environments for at least 20 years without loosing the quality of the enclosure. |
|
... see all the products in the category
| |
