|
|
|
|
|
|
wall mounted stainless steel junction box, and Smart cabinets with a single front door in finely polished Aisi 304 EN-1.4301 stainless steel.
Its monobloc manufacture allows protection up to IP66 with a maximum resistance of IK10 complying with EN-60529 and EN-50102 standards and Nema 4x by UL. A drainage channel prevents any liquid contact with the polyurethene joint or hidden hinges.
Complies with all EC regulations.
• Specially designed for placing switches, machine controls, meters and other cases where a high quality and a high resistance are required while keeping an attractive appearance
• Officially approved for food, chemical, pharmaceutical, transformer and telecommunication industries for both inside and outside use due to the advantages of its high resistance to chemical agents and its durability
• delvalle serves to order any measurements required, including custom built holes and cut outs both for door and case.
• All models in stock for immedate delivery.
Special solutions:
• Built to individual requirements
• Stainless steel plinths
• Metal legs
• Window door
• Manufactured in Aisi 316 EN-14401 stainless steel
• Top quality electromagnetic EMC protection between frame and contact surfaces, guaranteeing a perfect electrical connection following EEC regulation 89/336.
|
|
|
|
|
|
ELECTRICAL CABINET AND BOX
Smart 1.5mm. stainless Monobloc IP66 single-door wall cabinet, with ample mounting space.
Its Monobloc design and seamless polyurethane joints provide IP66 protection and impact resistance IK10 in accordance with EN-60529 and EN-50102 standards. Channel flashing prevents liquids coming into contact with polyurethane joint and concealed hinges. Bolts included, 130º door opening. To open the doors a standard 5 mm double bit is fitted.
Built in compliance with CE regulations. UL Nema 4.12 and 13. compliant.
• Specially designed for applications where controllers, meters, heating, air conditioning, control systems are fitted.
• Standard Epoxy-Polyester Textured Ral 7032 or 7035 paint.
• delvalle can make any measurement to order on request , including holes, shaped channelling, both on the door and the housing, in addition to any other colour of paint required.
Special solutions:
• Customised to your measurements.
• Plinths
• Roof to protect from sun, rain, etc.
• Metal feet.
• Cable pass through lower cover.
• Transparent polycarbonate door.
• Manufactured in stainless steel AISI 304 or 316. EN 14401.
• Insulating mounting plate (Bakelite) or painted steel.
• EMC protection joint between the frame and the contact surfaces. Ensuring perfect electrical connection. CEE 89/336 standard.
|
|
Proline
- Industrial cabinet with type of protection IP 55
- Welded steel frame
- Static load-carrying capacity 600 kg
- Also available as EMC version
eurorack
- Type of protection up to IP 40
- Static load-carrying capacity 400 kg
- Frame dividable
- EMC versions also available
minirack
- Type of protection up to IP 20
- Side with built in handle
- Static load-carrying capacity 200 kg
Cabinet control system s-guard
- Stand alone and flexible security system for remote control, control and message all safety values of climate and operation of networking devices
Socket strips
- socket strips: SCHUKO, UTE, IEC and US
|
|
Safety enclosures for explosive environments are meant to
be used in areas with explosion risk 1, 2, 21 and 22 gaz « G »
and dust « D » according to 94/9/CE directive.
They ensure emergency stop, load break for electrical
maintenance and switch disconnection next to all low voltage
network.
|
|
|
Pepperl+Fuchs products are used throughout the world in applications involving industrial, hazardous and corrosive environments. By engineering a complete solution at our own facility, Pepperl+Fuchs is able to offer its world-class products in a variety of panels and enclosures designed and built according to your specifications.
|
|
Junction boxes are intended for a special - typically swiss - installation technique. It consists in establishing branchings from laid through conductors. The involved material are a baseplate fitted with branching terminals and a cover.
Further junction boxes of thermoplastic, polyester or thermosetting material are available for the same type of application.
|
|
|
|
|
|
The CEFEM dust SAFEBLOC ATEX is a cut-off and lock device intended to be used in areas with risk of explosion: zone 21 and 22, for dust "D", according to the EU directive 94/9/EC.
It complies with standards and regulations to ensure the safety of operators involved in the emergency break, the break for mechanical maintenance and the safety break beside any low-voltage circuit terminal.
They are composed of an IM switch disconnector, with a visible cut off, controlled by a right side handle, lockable by three padlocks on OFF position.
A position indicator (ON / OFF or I / O) allows you to view at one glance the position of the switch.
The cut-off system is clearly visible to the operator through a glass window triplex.
These 2mm thick boxes steel are very robust.
A double lock prohibits the opening of the door when the switch is ON and the closure of the switch when the door is open.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
All industries dust ATEX: zone 21 or 22
Cement, Mining, Quarrying, Steel, Paper, and Sugar.
|
|
|
|
|
|
CHARACTERISTICS
Switche disconnectors :
IM from 40 to 500 A with right lateral handle and
visible cut-off.
Handle :
Lateral, isolated, red, lockable with 3 padlocks in
« open » position, can not be unfixed from the outside
of enclosure.
Connexions :
Up/Down or Down/Down connection with pre-cabling
of uper terminals using connecting bars starting from
160 A.
Double door interlock :
impossible to open the door when switch is « ON » and
impossible to shut the switch when door is open.
Visible cut-off :
through transparent polycarbonate lid.
Locking :
using isolating screws for locking of the lid, equipped
with hinges. (other lock on request).
Enclosure :
• box with 3 mm thick polyester fibre-glass reinforced,
Colour RAL 7035
• door made in auto-extinguishible transparent
polycarbonate, with no halegen, implemented with
internal hinges, 180° opening on left hand side,
• overall protection :
IP 55 with air vent.
IP 65 on request.
• auto-extinguishible material according to IEC 695
2-1 standards ; fire-proof according to UL94HB.
• temperature resistant : - 35° à + 120°C.
• IK10 shock resistant : 20 joules.
• 4 wall fixations.
Earth connexion :
using 2 earth connections inside the box.
|
|
|
|
|
|
The CEFEM steel SAFEBLOC switch Disconnector is a cut-off and lock device. It complies with standards and regulations to ensure the safety of operators in industry, where the risk is permanent.
The SAFEBLOC enclosure includes a position indicator (ON / OFF or I / O) for a better guarantee of safety.
The cut-off system is clearly visible to the operator and is maintained whatever the circumstances.
These boxes can be installed on machines or close to each engine.
The security features are multiple:
The switch contacts are visible when the switch is open, the mechanical indicator allows to view at one glance the position of the switch, double lock prohibits to open the door when switch is ON and the closure of the switch when the door is open, the handle is lockable by 3 padlocks on ON position.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
In all heavy process industries: cement, mines, quarries, Steel, Paper, Sugar, Glass industry…
|
|
- quality sheet steel, body 1.25-1.5 mm gauge (depending on model), door 1.5 mm gauge
- zinced mounting plate, 2.5 mm gauge
- surface protected by powder coating, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 140°/180° to the right, DIN compliant
- available in many sizes, pre-configured ready for use
- sash fastener 3 mm double bit (bar lock for 1200 mm or taller models), can be exchanged for any other common lock system
- zinced mounting plate provides basic EMV protection
- cable entry through sheet steel bottom gland plate
- rail systems, glazed doors, wall mounting lugs, locking systems and other accessories available as listed in Accessories for Wall Mounted Enclosures or on request
- Wall Mounted Enclosures also available in stainless steel
|
|
- principal design based on extremely strong, chamfered and welded sheet steel construction
- 1.5 mm body, 2.0 mm door and back plane sheet steel
- zinced mounting plate, 3 mm zinced sheet steel
- powder coated, RAL 7032 structure
- earthing for body, door, and mounting plate
- foamed PU door gasket / high protection class (>IP 55, EN 60529 / double door model: IP 54)
- hinges open 120°
- sash fastener with 3 mm double bit
- removable back plane
- sturdy two-piece bottom plates
- auxiliary components like plinths, wall mounting lugs, transport units, different locking systems and other accessories available as listed in Accessories for Floor Standing Enclosures, System Accessories, and on request
|
|
- Control housings from aluminum
- Support arm systems
- Control housings from steel sheet with the series "BAE" and "BAV"
|
|
|
|
|
|
Terminal boxes of all sizes and design types provide high dust and water ingress protection at and around cable clamps and other connections. Access protection is designed to ensure electrical and mechanical safety as mandated by the VDE. Terminal boxes are particularly well suited to house small PLCs, so-called intelligent terminal blocks or bus blocks.
- sheet steel housing, powder coated RAL 7032 structure
- narrow chamfer on the body, robust drip rail design
- good overall accessability
- extensive range of accessories
- optional hinged covers with sash fasteners
- foamed PU cover gasket
- foamed PU door gasket / high protection class (>IP 65, EN 60529)
- captive cover screws in plastic sockets
- precise contact pressure due to fixed tap hole depth
- removable cage nuts allow for good accessibility of drillings for wall mounting (even in fully fitted enclosures)
- pre-punched back plane knockouts with blanking plugs
- mounting plate rests on embossed portion when interior profiles are removed
(i.e. clearance is kept for rivet heads)
- removable yellow chromated interior profiles (no doubling of material), variable mounting depth through profile extensions or use of spacer bolts
- zinced support rail or mounting plate makes conductive contact upon installation (excellent conductivity due to copper-plated threaded weld studs)
- also available in stainless steel
|
|
|
|
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs.
|
|
The lid stay of the one-piece consoles is locked against unintentional closure.
Maximum space for cable entry with divided gland plates.
The mounting plate is height-adjustable by 2 x 40 mm, e.g. with deep installed equipment in the lid or cable entry from the rear.
Material / Surface finish
Material:
Stainless steel 1.4301
Enclosure: 1.5 mm
Door or double door and console lid: 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure, door and console lid: Brushed, grain 120
Mounting plate: Zinc-plated
Supply includes
Enclosure, solid rear and sides, door or double door at the front, with locking rod, console lid with lid stay and stainless steel cam latched in the enclosure, two-piece gland plate, mounting plate, zinc-plated, passivated.
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
-Hinged latch cover
1. Stainless steel hinge&latch type keeps water proof rating even though opening the cover frequently.
2. Changeable hinge&latch size or addable hinges&latches according to box size in order to keep more strong water proof rating
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 81 kinds sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Optional for modifying all latches instead of hinges
7. Available stainless steel wall mounting bracket
|
|
|
At the time of delivering the goods, the Draw Latch-Hinge and Particular Locking Device are equipped and its opening-closing is made simple, and it is a cabinet shape product. The delivery-time of our products is promptly made from our own factory with low price and the diverse sizes also the accessories which make the consumer's satisfaction. HIBOX has a various kinds of control boxes. The dimension is from 200X300X150 mm to 500X400X200 mm or 400x 600x 230 mm. All of the products are waterproof and dust-free. (IP 66~67, NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
COMMAND BOXES – INDUSTRIAL CONTAINERS
To choose an appropriate container is a crucial phase in the development of a project. It is necessary to proceed with systematic investigation, methodical assessment and application variables: where are we going to install our equipment? In what environmental conditions? What level of protection must we have? How much space is available? How should it be arranged? By working out this information we can define the most suitable product and meet the demands of the project. New Elfin produces a vast range of containers:
- aluminium: 70x118 up to 400x400
- stainless steel: 82x82 up to 230x26
- thermoplastic: 50x52 up to 254x361
- polyester: 250x300 up to 500x600
|
|
|
Housed in tough ABS boxes and panels these IEC EN60320 Distribution Units have combinations of four, five or six outlets together with neon indicator, fuse and switch options. The three sizes are available in various combinations and, other than the compact version, all have shuttered outlets. The larger enclosed versions are also available with EMI filtering.
|
|
IP67-IP55 ENCLOSURES FOR SOCKETS AND AUTOMATICS SWITCHES
PRYMA Enclosures for sockets and automatic switches are provided plain or equipped with sockets and wiring, in any combination and without minimum order quantities required.
They are sealable, UV protected on windows and also completed with fastening and turning hinges with a locking device to assure their watertightness.
They are made from halogen free long-lasting plastic material. DIN rail can be fixed to the frame, and also, to the base without the need of screws. Holders are included on the enclosure to fix mounting plates and they are ready for earth and neutral bar installation. Cable entries are adapted to the metric system and sockets wiring is carried out under electrical engineering preceptives.
|
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures. The enclosures dimension start from 50X65X55 to 600X800X280 mm and DSE have 400 kinds of enclosures-! Refer to the gereral catalogue of HIBOX in Direct-Industry or www.dsehibox.com
|
|
DISTRIBUTION ENCLOSURES
ECOLOGY series of distribution enclosures can be sealed and they are provided with opaque or transparent (UV protected) reversible windows. They are made from halogen free longlasting plastic material and equipped with dust caps for wall mounting screws and 1/4 quick locking unloosable screws.
They have supports for mounting plates fixing, they are prepared for installation of earth and neutral bars and cable entries are adapted to the metric system. On the 26 and 57 modules versions DIN rail can be adjusted on its height.
|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist – however particular the task in hand.
|
|
|
|
|
|
FLOOR STANDING CABINETS
The Floor-Standing Cabinets of the Argenta–Plus series comprise a set of industrial metal enclosures designed
to contain any type of electrical devices and equipment necessary for the supply, distribution and conversion
of electricity, and suitable for control and automation equipment for plants and machine tools.
This range of cabinets has been designed for maximum versatility, so that the installer can implement their
own arrangements depending on the needs of the installation. Functionality is high thanks to the various
possibilities for linking cabinets together, the possibility of installing any type of electrical devices, and the
complete range of accessories available for this series.
Intended for the most professional sector, the range is available in two versions: COMBINABLE, supplied
ready-assembled and COMPACT. Both are available in opaque-and transparent-door versions. They are made
from high-quality materials, in cold-rolled steel sheeting, achieving protection degree IP55, and a height of
up to 2 metres.
|
|
|
Even in the toughest ambient conditions. Current examples include: Compact, secure technologies for Industrial Ethernet, enabling simple modifications to production procedures. Modular enclosure technology is advantageous in terms of the rapid assembly and adaptation of controllers. At the human/machine interface, your ergonomic requirements are precisely realised with the Command Panel and Industrial Workstations.
|
|
|
It is largest of electric box and the selection range was made more expensive, and it was New technology of the plastic Box. Big Box selected and supported by the packing development institute of industrial design. Through the use of special waterproof and dustproof tests, contained parts are protected well. The use is simple as big type Sensoe, Relay Box, Sleeve, Power Water Tool Box, Junction Box and Control Box. The dimension is 600x800x120 mm. All of the products are waterproof and dust-free. (IP66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
The new CS compact enclosure is the ideal solution for applications where a larger wall mounting box than ETA "ST" range or a smaller free-standing cabinet than ETA "ATB8" range is requested.
Ergonomic design and solid construction are the key features of the CS enclosure, together with the possibility to fit standard ETA system accessories and a large cable entry opening.
This new product line will be offered in 6 single door sizes ranging from 600x1200x400 to 800x1400x400 and 6 double door sizes from 1000x1200x400 to 1200x1400x400.
|
|
|
|
|
|
IP65 WALL MOUNTING METAL CABINETS
The ARGENTA Series includes a group of metal enclosures used to house on the inside the electrical or
electronic switchgear, controlgear and equipment necessary to supply, distribute and electricity.
Mainly destined for industrial electrical installations as enclosures for measurement, transmission, signposting and control equipment or as enclosures for all the equipment necessary to coordinate the different electrical currents. The ARGENTA Series includes 41 standard models of metal enclosures, all of
which are manufactured in opaque door version.
The design and manufacture of this product line is sufficiently flexible so as to adapt to special executions
that require specific dimensions in agreement with user and installation requirements. Enclosures made
with high quality materials in cold-rolled steel plate of up to 2 mm thick and coated with RAL 7035
hardened epoxy-polyester paint.
This series is accompanied by a set of accessories that complete the scope of application of the product:
mounting plates, inner doors, canopies, elevation eyebolts, ventilation systems, etc.
|
|
|
Give us your statement of conditions, we have the know-how and experience to wire your electrical cabinets and boxes, whatever the final application.
|
|
Rittal Electronic Systems offer "complete know-how" in the field of
electronic packaging
at a high level - up to Level 4.
For CPCI, VME and AdvancedTCA applications.
This means "plug & play" systems for extremely high data throughput levels in telecommunications, in the network and server segment, in
automation, in traffic guidance systems and in medical technology.
System solutions in a modern design, with super-fast backplanes,
with integral power modules and with effective climate control
concepts.
|
|
|
|
