|
|
From simple emergency stop switches to complete industrial PC's or CNC units - such complex modules need to be adapted to the rough conditions prevalent in industrial environments.
ROSE operating, display and mobile control enclosures provide reliable protection to the built-in electronics while offering a high degree of user comfort.
Depending on the area of application the enclosure systems can be adapted individually to provide higher protection degrees.
|
|
These boxes comply with the norm NFC 15-100 .
They provide optimal protection against electric contacts: differential devices, isolating plastrons and casing.
|
|
|
These panel enclosures are designed for supplying electricity to workstations in workshops, mainly for car industry.
|
|
Functionality and safety for the built-in electronics.
Variability and the best possible adaptation to individual electronics are the key features offered by ROSE electronic enclosures. The three product lines provide the best possible protection in all applications.
Multitronic - PCB enclosures in many different designs
Profitronic - Profile enclosures for sophisticated electronics that can be used both indoors and outdoors
Wavetronic - Desktop enclosures for lab and instrumentation technology, variable in height
NoVoTronic - Aluminium profile enclosure system in 3 sizes. For data collection, PC, measurement and control technology.
|
|
Explosion-proof box EExd:
- Integration of your not certified components
- Connection with cases equipped EExe
- Usable in very broad beaches of temperature
For other models, please consult us.
|
|
Technical Data:
Version: II B
Explosion protection: Ex II 2 G
Ex II 2 D
Ex d, Ex d[ia] II B
Certificates: empty enclosure: INERIS - 00 ATEX 0021 X
Material: copper free aluminium
Surface treatment : unpainted, painted on request
Ingress protection : IP 65/67 in accordance with EN 60529 on request
Temperature range:
-50°C to +55°C / Ex-d IIB T6/T5/T4
-50°C to +40°C / Ex-d (ia) IIB T6
-50°C to +40°C / Ex-d (ib) IIB T6
-50°C to +55°C / Ex-d IIB+H2 T6/T5/T4
-50°C to +40°C / Ex-d (ia) IIB+H2 T6
-50°C to +40°C / Ex-d (ib) IIB+H2 T6
|
|
|
Cases plastic: various materials: polystirene, polycarbonate reinforced glass fibers, dimensions of 50x52x35mm with 361x254x165mm, sealing IP66, full or transparent lid, boxes with buttons plastic, cases electric plastic, boxes distribution plastic, joint boxes cable plastic, self-extinguishing, high impact resistance and to the chemicals
|
|
Modular design
The Bernstein light control housing CC-3000 is especially suitable for
mounting display components or control elements, (HMI's, IPC's etc). Its
height and width are variable up to a maximum recommended size of
approx. 600 x 600 mm. Various combinations of the 55, 120 and 200 mm
wide aluminium profiles give the housing several depth possibilities.
Customer-specific housing
The light control housings CC-3000 are supplied from the factory as standard housings or as custom-built versions. The modular concept is superbly suited for customer-specific solutions. The aluminium profiles are simply cut to length and assembled with the corner modules to create various sizes. The basic housing profile sizes can be combined with each other to achieve the required housing depth.
Besides the dimensions, many other housing properties are selectable in customer-specific configuration, e.g.: the hinged side of the door
the housing configuration for suspension systems the colour of the corner modules.
The front panel is also available ready for use: machined to customer's specifications, screen printed or engraved. A checklist helps to define the required housing configuration and at the same time serves
as an enquiry and order form.
|
|
BOS Ecoline combines the advantages of aluminium profiles with the optimal cost effectiveness of plastic of plastic caps to create a superior enclosure concept. Different sizes and profile types permit use with an extremely wide range of electronic products.
Four cross-section formats are available, each in a closed, open-on-one-side or divided version. The robust aluminium profiles are available in each size and design in three standard lengths ex-warehouse.
Plastic caps, with or without integrated wall brackets, are available as end elements. Depending on the profile type, ingress protection category IP40 can be increased to IP54 by means of a seal set.
As a system supplier, in addition to mechanical processing, BOPLA can supply customer-specific membrane keypads and the assembly of complete enclosures including electronic components.
|
|
BOTEGO, BOPLA´s enclosure system, sets new standards in enclosure technology.
Thanks to its design, the enclosure, consisting of two plastic half-shells, can be inserted either horizontally or vertically.
Extension sets permit optimal adaptation to the relevant space requirements.
The ergonomically shaped operating front permits user-friendly operation of the equipment.
The ergonomically shaped operating front permits user-friendly operation of the equipment.
In order to achieve natural convection everywhere in the enclosure, the system was developed in such a way that sections with air vents can be mounted directly over each other or also staggered.
The snap-lock technology, which considerably reduces the amount of mounting time and work needed, is a new technological development.
With BOTEGO, every user can create his or her own individual design. Different design elements and caps in 6 different colours can modify the basic neutral enclosure to create an individual touch.
All the elements which vary the design are available ex works.
For enclosure surface designs, BOPLA offers both standard decor foils and customer-specific foils-shape, colour or embossing can be selected individually.
|
|
With Alurail, BOPLA has developed a modular DIN rail enclosure which is especially suitable for use in measurement, control and automatic control technology. Basic profiles, each in 8 standard lengths, are also available.
A spilt basic profile which facilitates PCB installation can also be supplied. In addition to the front panel, customerspecific circuit boards can also be inserted into the basic profile as a front end elements. Individual design of the enclosure construction is made possible by the clipping on and screwing of different module types in various lengths onto the basic profile.
The anodised basic profiles and modules are equipped with integrated guide grooves for one or more circuit boards. If required by the customer, the basic and module profiles can be supplied in special lengths.
In addition to the fitting of the enclosure onto a mounting rail ( 35 mm ) acc. to DIN EN 60715 TH35 (prev. DIN EN 50022), the enclosure can also be fitted direct to the wall. The fitting element required for this purpose is available as part of the Alurail accessories programme. As a system supplier, in addition to the matching connection terminals BOPLA also offers customer-specific membrane keypads and all the necessary processing work at low cost and from a single source.
|
|
The LDG-S serie of enclosures are fully insulated enclosures according to the specifications of the machinery and the auto motive industries.
Designed for easy snap-on assembly onto DIN-rails by integrated snap-on clip. These enclosures facilitate economical device assembly with optimal utilization of space. For the termination of the conductors of the cable 2 enclosure versions are availible:
- pluggable terminals for easy servicing and exchange (commercial pin headers on the pcb.
- screw terminals for a fixed termination of the conductors. For effective heat dissipation the LDG-S enclosure features a base part with integrated ventilation slots. Closed versions (without ventilation slot) are availible upon request.
Features:
2 installation widths: LDG-S2: 22.5 mm; LDG-S4: 45 mm.
Options for the termination of the conductors:
LDG-S2: 4 screw terminal blocks with 4 terminals each or 4 pcb headers with 4 pin contacts each for connecting cable cnnectors with 4 pins.
LDG-S4: 8 screw terminal blocks with 4 terminals each or 8 pcb headers with 4 pin conacts each for connecting cable connectors with 4 pins.
Easy snap-on assembly on DIN-rails according to DIN EN 50 022
Easy assembly of the enclosure achieved by snap-in design of the two base part and the top part
Transparent housing cover with the option for a label
Customized colors and versions upon request
|
|
OKW offers a comprehensive range of cases for DIN rail mounting. All types are extremely installation-friendly, for mounting components as well as for connection work!
Your advantages:
- Different connection options for commercial components such as terminals, PCB plug headers and front connectors.
- Without/with integrated connection system.
- Without/with ventilation slots.
- Different sizes following DIN 43880, unit 1.
- Suitable for DIN rails EN 60 715.
|
|
DIDO-S distribution boards are available in two types: surface mounted and flush mounted boards.
Particular attention has been set to the need to give more space in the inside in order to facilitate the operations of
wiring therfore favoring the simplicity of instalation.
PE4, PE8 and PE12 boards have a particular system to fix the DIN rail; it allows to regulate its height in two positions, an
inner and an outer.
Some Flush mounted boards (CMR) answering the demands of space saving products - more compact enclosures.
All distribution boards have DIN rail and brass terminal block (earth and neutral).
The particular structure of the lid, limits the board prominence from the wall of only 20 mm, creating a product of
discrete design and presence.
The interchangeability among the doors (transparent and opaque) and their reversibility together with the large
space for the assembling make these series very versatile.
Always careful to the demands of the clients, all products are protected with a thermo-retracable film.
|
|
The enclosure line with IP 65 ingress protection, manufactured using high-quality polycarbonate or lower-priced ABS, offers optimal protection for your components.
The polycarbonate (M...) enclosures are UL-listed.
36 different enclosure sizes and a wide range of accessories permit the fitting of products from terminals (available as accessories) to high-value electronics.
|
|
Schlegel and DUX enclosures offer much space inside safeguarding your control units and terminal blocks to an optimum. The enclosures are made of plastic or aluminium alloy casting.
The varied types allow to find the right enclosure for every application.
|
|
|
VCC's HMS panel lens has been designed to display printed circuit board mounted 10mm LEDs. The unique feature of the HMS low-profile lens is its special threads. Each mating component is designed with six single-entity threads. The six individual threads allow for multiple mating entry points between the lens and the retaining ring. In addition, the amount of rotation required to secure the assembly is only a one-half turn. HMS mating components have a unique thread cross-section design that eliminates over-tightening- a typical cause of thread stripping of plastic mating parts. Any attempt to over-tighten the HMS will result in the retaining ring sliding into a previous thread without damaging either component. The unit can then be retightened to a secure position. The assembly is installed by hand, eliminating the necessity of tools. A specifically designed compression seal serves to provide both moisture and dust protection for the HMS.
|
|
INTERTEC instrument enclosures are made of long fibre reinforced polyester (GRP) in sheet moulded compound design. The enclosures are very strong and have an excellent chemical resistance. They are therefore preferred in chemical industry and raffineries.
INTERTEC offers worldwide the largest range of instruments enclosures as well as the corresponding mounting systems.
|
|
The recently developed CUBEx control enclosure product line from R. STAHL now makes it possible to combine compex control and distribution panels into comprehensive, space-saving units. Adds a whole new dimension to individualised and flexible solutions for your applications. Other customer-specified control and distribution panel designs are also possible. The CUBEx system increases the flexibility of your applications and ensures that all internationally recognised installation technologies can be employed. All standard, commercially-available electrical equipment can be installed. The space-saving design of this IIB enclosure enables a mounting distance of just 10 mm between units. Moreover, flameproof enclosures incorporating "D2D" technology enable the direct connection enclosures or terminal chambers are required. CUBEx is the logical next step in the development of IIC tchnology integrated in the renowend 8220 Series. For use in Group IIB hazardous areas in Zone 1 and Zone 2 or Zone 21 and Zone 22.
The main connection switch of the lighting and heating panels CUBEx Series 8264/5-ExV is operated through the side wall via an actuation mechanism. The circuit breakers are fitted on the second mounting level and are actuated via totary drives. As an option it is possible to fit test keys to the ELCBs to make it possible to actuate the back wall of the enclosure for fixing the devices. Cable entry is done directly via tapped holes, wired directly to the switches. For current distribution the original comb type rails are used at the switching units. A typical design allows for 12 or 24 circuit breakers. Different designs upon request.
|
|
R. STAHL supplies explosion protected terminal boxes in various versions and sizes, as individual enclosures or as terminal box combinations, presented in ecnclosure series.
8118:
glass fibre-rinforced polyester resin, in 3 basic enclosure sizes
8146:
glass fibre-reinforced polyester resin, in 8 basic enclosure sizes and various heights
8125:
painted steel plate or stainless steel, in 6 basic enclosure sizes and various heights
Explosion protection to CENELEC, IEC, NEC
For use in Zone 1 and Zone 2
Terminals fitted to order
Cable entry mounting to order
Degree of protection IP 66
Specialised knowledge is required for designing and construction of explosion protected electrical engineering, it is vital to observe the explosion protection regulations. R. STAHL is experts in this subject! R. STAHL design and manufacture explosion protected terminals to order and to customer specifications taking into account all relevant regulations and standards.
|
|
As practised by automation engineers for some time, the trend in engineering and plant construction is strongly towards the supply of complete systems. Drawing on several decades of experience, INTERTEC does not have to reinvent the wheel for every new project. Access to an intelligent modular concept allows industrial quality at low costs.
SAFE LINK - A Convincing System
• Enormously reduced engineering costs
• Low material procurement costs
• Pre-installed hook-ups save time and costs at the site
• Sensible standardization reduces the variation in range of instrument installations and saves storage costs
• Field-proven and practice-proven solutions for traditional installations and innovative direct mounting
• High measuring accuracy resulting from short impulse lines
|
|
Thanks to their versatility and the comprehensive range of accessories, these robust, attractive enclosures can be used for a wide range of applications.
With its eye-catching visual design, which includes seals as a design element, it makes any electronic components look good.
ALUBOS enclosures are available with profiles which are closed, divided horizontally, and open on one side.
The lengths of all profile types are so variable that the result is a universal, ergonomic, individual hand-held enclosure in your special design.
Ingress protection up to IP 65, the high mechanical loading capacity of the profile and good EMC screening ensure a high level of protective functions even in the standard design.
|
|
This highly adaptable ABS hand-held enclosure system is available in grey or black, depending on the design.
Each enclosure type provides different equipment features and accessories, so making it easy to find the ideal enclosure for use with a wide range of mobile data collection and processing applications.
|
|
- Resistant to high-pressure cleaning
(protection category IP 69K). The seal lies between two surfaces and is ideally compressed by the screw fastening
- Suitable for clean room use.
Optional screw fastening to comply with high standards in the food and hygiene sectors:
external with hex screws,
internal with plastic stoppers.
- Optimum EMC conditions.
The labyrinthe seal achieves a particularly high level of RF shielding of the enclosure.
- Accessibility.
Internal rear panel bracket. This solution is clearly superior to external hinges from a hygiene point of view.
- Wall mounting can be implemented directly from the rear using M8 pull-in nuts, or from the front using wall mounting brackets.
|
|
Simplify your next operator interface project with a STRONGARM mounting and enclosure combination.
Enclosures are designed to your exact terminal specifications; including the cut-out, cable space, drive access and cooling requirements. Specify pushbutton cut-outs and other extras to complete the ideal, hassle-free enclosure to complement your STRONGARM mounting. Enclosures are specially reinforced for pendant arm mounting to assure solid, wobble-free operation.
Features:
• Operator "friendly" interface
• Compact and repositionable including three levels of vertical travel (13", 23", 30")
• Internal, local, or remote PC (Internal MicroBox PCs available from STRONGARM)
• Multiple keyboard and pointer selections (including STRONGARM's revolutionary Stainless Steel Mouse)
• Feature panel for easy pushbutton additions
• Post Mount, Machine Top Mount, Wall Mount and Ceiling Mount available
• Horizontal and vertical extension capabilities
|
|
Uniplast range: The answer to your needs for a permament and safer protection of your electrical or electronic systems
Insulating, compact or modular system of enclosures that permits the construction of many different con·gurations, from a plain door to a transparent door, a single or double door and multi-compartment switchboard, effective even under the most severe working conditions.
It complies with the principal of "double insulation", which guarantees the maximum safety to the operating personnel.
The high quality of the material chosen for the construction of these enclosures is tested according to UL norm UL746C§26 "Ultraviolet Light Exposure".
Practice tests in a moderated climate have shown that the polyester enclosures are resistant against outdoor use and aggressive chemical environments for at least 20 years without loosing the quality of the enclosure.
|
|
|
The range of moulded endosures is made up of a wide selection of products such as modular boxes, wall fixed cabinets adapted to special applications for buildings, floor fixed for industrial facilities, electrical distribution, public lighting, etc.
|
|
|
