|
|
|
VCC's HMS panel lens has been designed to display printed circuit board mounted 10mm LEDs. The unique feature of the HMS low-profile lens is its special threads. Each mating component is designed with six single-entity threads. The six individual threads allow for multiple mating entry points between the lens and the retaining ring. In addition, the amount of rotation required to secure the assembly is only a one-half turn. HMS mating components have a unique thread cross-section design that eliminates over-tightening- a typical cause of thread stripping of plastic mating parts. Any attempt to over-tighten the HMS will result in the retaining ring sliding into a previous thread without damaging either component. The unit can then be retightened to a secure position. The assembly is installed by hand, eliminating the necessity of tools. A specifically designed compression seal serves to provide both moisture and dust protection for the HMS.
|
|
INTERTEC instrument enclosures are made of long fibre reinforced polyester (GRP) in sheet moulded compound design. The enclosures are very strong and have an excellent chemical resistance. They are therefore preferred in chemical industry and raffineries.
INTERTEC offers worldwide the largest range of instruments enclosures as well as the corresponding mounting systems.
|
|
|
|
|
|
The recently developed CUBEx control enclosure product line from R. STAHL now makes it possible to combine compex control and distribution panels into comprehensive, space-saving units. Adds a whole new dimension to individualised and flexible solutions for your applications. Other customer-specified control and distribution panel designs are also possible. The CUBEx system increases the flexibility of your applications and ensures that all internationally recognised installation technologies can be employed. All standard, commercially-available electrical equipment can be installed. The space-saving design of this IIB enclosure enables a mounting distance of just 10 mm between units. Moreover, flameproof enclosures incorporating "D2D" technology enable the direct connection enclosures or terminal chambers are required. CUBEx is the logical next step in the development of IIC tchnology integrated in the renowend 8220 Series. For use in Group IIB hazardous areas in Zone 1 and Zone 2 or Zone 21 and Zone 22.
The main connection switch of the lighting and heating panels CUBEx Series 8264/5-ExV is operated through the side wall via an actuation mechanism. The circuit breakers are fitted on the second mounting level and are actuated via totary drives. As an option it is possible to fit test keys to the ELCBs to make it possible to actuate the back wall of the enclosure for fixing the devices. Cable entry is done directly via tapped holes, wired directly to the switches. For current distribution the original comb type rails are used at the switching units. A typical design allows for 12 or 24 circuit breakers. Different designs upon request.
|
|
R. STAHL supplies explosion protected terminal boxes in various versions and sizes, as individual enclosures or as terminal box combinations, presented in ecnclosure series.
8118:
glass fibre-rinforced polyester resin, in 3 basic enclosure sizes
8146:
glass fibre-reinforced polyester resin, in 8 basic enclosure sizes and various heights
8125:
painted steel plate or stainless steel, in 6 basic enclosure sizes and various heights
Explosion protection to CENELEC, IEC, NEC
For use in Zone 1 and Zone 2
Terminals fitted to order
Cable entry mounting to order
Degree of protection IP 66
Specialised knowledge is required for designing and construction of explosion protected electrical engineering, it is vital to observe the explosion protection regulations. R. STAHL is experts in this subject! R. STAHL design and manufacture explosion protected terminals to order and to customer specifications taking into account all relevant regulations and standards.
|
|
As practised by automation engineers for some time, the trend in engineering and plant construction is strongly towards the supply of complete systems. Drawing on several decades of experience, INTERTEC does not have to reinvent the wheel for every new project. Access to an intelligent modular concept allows industrial quality at low costs.
SAFE LINK - A Convincing System
• Enormously reduced engineering costs
• Low material procurement costs
• Pre-installed hook-ups save time and costs at the site
• Sensible standardization reduces the variation in range of instrument installations and saves storage costs
• Field-proven and practice-proven solutions for traditional installations and innovative direct mounting
• High measuring accuracy resulting from short impulse lines
|
|
- Resistant to high-pressure cleaning
(protection category IP 69K). The seal lies between two surfaces and is ideally compressed by the screw fastening
- Suitable for clean room use.
Optional screw fastening to comply with high standards in the food and hygiene sectors:
external with hex screws,
internal with plastic stoppers.
- Optimum EMC conditions.
The labyrinthe seal achieves a particularly high level of RF shielding of the enclosure.
- Accessibility.
Internal rear panel bracket. This solution is clearly superior to external hinges from a hygiene point of view.
- Wall mounting can be implemented directly from the rear using M8 pull-in nuts, or from the front using wall mounting brackets.
|
|
In industrial processes different parameter measurement systems are mounted to optimize and control the process. Housings are a very important part of the whole system as they allow to insert the sensors into the media at a specific place in the process (pipe, vessel or basin).
Depending upon process requirements and the type of electrode/sensor used (pH/ORP, DO, conductivity, turbidity, CO2), the design and function of the housing can vary considerably. The demands placed on process adaption methods by plant manufacturers, endusers and not least legislation, are numerous, particularly in the interests of process reliability, e.g. sterility/hygiene, and operator safety.
METTLER TOLEDO offers, apart from their world-famous INGOLD weld-in sockets, a wide selection of housings to cover the manifold requirements of the process industry, from simple static models throughto sophisticated and certified retractable versions for automated sensor cleaning.
|
|
-Lift off screw cover type
1. Available 2 plastic type of non-flush handle screw(indluded) or flush cross screw(optional)
2. Reinforced self-threaded design
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 48 kinds sizes from 50x65x45 mm to 380x560x180 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket
|
|
The product weighs approximately 1/4 the weight of an iron box and can be easily installed or moved. The product is free from corrosion, carries superior insulation.
The product has passed waterproof and dustproof tests carried out under rigid quality standards. ( IP 66 -67)
The use is also convenient for the installation of Terminal Substitution Rail, Button Box, Small Terminal, Signal, Relay and Sensor, Communication and Joint Box etc.
Refer to our E-Catalog on Direct-Industry. There are more story.
|
|
HI-BOX's Wall mounting enclosures are manufacured by HI-resistance polycarbonate, polyester, and ABS. These wall mounting enclosures are suitable for fire-fighting and environment facilities. (good for outdoor) There are two kinds of enclosures: one is hinge type. The other one is screw cover type. We provide working for hole on enclosure by request. Also, we serve for supplying HI quality products with wide color tone and various colors in accordance with your requirement.The dimension of HIBOX's NICE BOX is from 100x130x70 mm to 500x700x 250 mm. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67, NEMA 4X)
Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
|
|
|
|
The new DIN enclosures IDG-B6 and IDG-B9 arefullv insulated and fulfill the requirements of the machinery and car industry.
The enclosures have the installation width of 105 mm for the IDG-B6 and 157 mm for the IDG-B9. They are designed for easy snap-in assembly on DIN-rails.
Three different versions of the housing cover allow customer specific solutions- There can be used commercial terminals from different suppliers or for matea-ble solutions with terminal plugs the according PCB headers from different suppliers with the according terminal plug headers.For solutions with connectors or terminals on the front side there is a fully closed version available.
The transparent front cover protects displays, Potentiometers or other contol devices on the front side against disadjustment or damages.
Features:
2 installation widths:
IDG-B6:105.0 mm, max. 36 terminals IDG-B9:157.0 mm, max. 52 terminals
Overall dimensions per DIN 43 880, size 1
Mountableto DIN rails per DIN 46 277 und DIN EN 50 022
Various termination options: 5.0/5.08 mm terminal blocks 5.0/5.08 mm; pluggable terminal block; Choice of connector on front cover.
Transparent front cover protects displays and control devices
DIN rail clip pre-assemled on housing base
Choice of colors and custom design available upon request (pending min. volume)
2 smaller installation widths are also available: IDG-B2: 35 mm; IDG-B4: 70 mm
|
|
œ Material: Die-cast aluminum
œ Most of 11A and 11B series boxes meet IP65 of IEC60529 dustproof and waterproof requirement
œ A wide range of size
œ Designed for mounting P.C.B.or DIN rail mounted terminal
œ Sand-blast finish of terminal boxes is painted in bone, as well as baking finish of amplifier boxes is mid-grey
œ EMI shielding
œ Construction with carbon fins for 11B series boxes
œ Stainless steel screws
œ Standard delivery:
1 box,1lid,4 or 6 screws,1 seal(some of 11B series include shielding -ring)
|
|
¡¤ Protection class up to IP 65
¡¤ Temperature range -40¡æ¡«120¡æ
¡¤ Defend corrision
¡¤ Better conducting heat
¡¤ Easily tooling
¡¤ Defend RFI
¡¤Capability of expansion of mould and component by the prefabricated screws
¡¤ Wall mounting application
¡¤ The box and the cover can be earthed
|
|
With its ALUBOX series Scame is offering a range of metal products sure to satisfy specific installation requirements in situations that demand a robust product.
With its excellent mechanical resistance and the strength to counter climatic and environmental stresses, the ALUBOX series is particularly well suited to environments that are harsh because of the kind of work carried out there - heavy industry installations, installation right beside a machine, for industrial automation, on board ships, for thermal, chemical and petrol chemical plants - even outside.
The ALUBOX series aluminium junction boxes are suitable for using in environments of major fire risk (CEI 64/8 part 7) and in AD-FT installations according to the specifications of the CEI 64-2 norm.
|
|
Key Features:
- Seamless Deep Drawn Construction
- Numerous Trim Heights Available per Housing
- Various Alloys and Tempers Available
- Short Lead Times on Standard Products
- Numerous In-house Capabilities to Modify Your Housing
- Great for Prototyping
- Three Standard Nutplate Configurations Available on Select Housings
ZERO Manufacturing, Inc. is the premier manufacturer of deep drawn aluminum enclosures. Available in over 32,000 pre-tooled sizes. For seamless, draft-free construction in aluminum enclosures look to ZERO.
It all starts with a single sheet of metal. ZERO uses only the highest quality aerospace aluminum alloys. Although we most often recommend aluminum as a durable medium, we also provide deep drawn Products in brass, copper, cold-rolled steel and mu-metal (in select sizes).
Standard lead time is 6-8 business days for all stock items.
Standard lead time is 12-14 business days for all non-stock items.
All non-stock items incur applicable set-up fees.
|
|
|
|
|
|
Aluminium-Enclosures are universal, stabile and easily adapted. “Packaging” electrical, electronic and pneumatic components.
They are very sturdy and easily mechanically machined and can be painted to the customer’s specifications in small numbers. As Clamp Enclosures, they are constructed as a modular system and can be fitted with clamps and cable screw connections and are used as a junction enclosure for electric cables and wires. The control enclosure has the function to protect the highly sensitive electronics against water, dirt and dust. They are frequently used as enclosure for voltage sensors in the measurement and control technique. The production is carried out in pressure casting or die-casting. All enclosures comply with the protection class IP 66 according to DIN 40050 (spray water protected). The standard colour of the enclosure is RAL 7001. The lid screws cannot be lost and are made of stainless steel. The mounting of the enclosure is completed outside the sealed area using separate mounting grooves. The Neoprene lid seal is resistant against oil and petroleum, special seals such as silicone are available when requested.
|
|
|
The Ensto Cubo H range meets the requirements of the machine and military industry as regards resistance against solvents, petrol and oil. Excellent temperature, impact and RFI/EMI (additional gasket required) resistance. The Cubo H enclosures are made of cast aluminium, sides always plain, colour grey RAL 7001. Enclosures are available in 26 different sizes.
|
|
Isolating critical controls from harsh environments is a job no one performs better than Hoffman. Our revolutionary enclosure solutions ensure reliable performance in a range of extreme conditions.
Aluminum Wall-Mount Enclosures
Clamp Cover
* Continuous Hinge with Clamps, Type 12
* Clamp-Cover, Type 4X
* Continuous Hinge with Clamps, Type 4X
COMPACT® Cast Aluminum Type 4X Enclosures and Accessories
* COMPACT®, Type 4X
* Hinge Kit
* Mounting Bracket Kits
* Panels
* DIN Type Rails
* Aluminum Type 4X Accessory Selection Matrix
|
|
The modular aluminium enclosure CC-4000 from Bernstein is a high value housing for industrial controllers and automation components in protection degree IP 65. Alu-minium profiles in different depths are easily assembled for their own or in combina-tion to create the desired housing dimensions in width and height. For better func-tionality a swivelling front door or rear cover provide direct access to internal circuits. The Bernstein suspension systems and base brackets guarantee the best integration of the housing at the customer's machine or plant. High functional accessories re-plenish the program to a high standard automation system.
|
|
l Hosing shell moulded in ABS
l Mount easily onto standard DIN rail
l With base for mounting rail
l PCB can be connected with terminal by welding
l Fast mount due to screwless assembly
l Custom material and color avilable
l Temperature range -20°C - 70°C
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
|
|
|
|
DIDO-S distribution boards are available in two types: surface mounted and flush mounted boards.
Particular attention has been set to the need to give more space in the inside in order to facilitate the operations of
wiring therfore favoring the simplicity of instalation.
PE4, PE8 and PE12 boards have a particular system to fix the DIN rail; it allows to regulate its height in two positions, an
inner and an outer.
Some Flush mounted boards (CMR) answering the demands of space saving products - more compact enclosures.
All distribution boards have DIN rail and brass terminal block (earth and neutral).
The particular structure of the lid, limits the board prominence from the wall of only 20 mm, creating a product of
discrete design and presence.
The interchangeability among the doors (transparent and opaque) and their reversibility together with the large
space for the assembling make these series very versatile.
Always careful to the demands of the clients, all products are protected with a thermo-retracable film.
|
|
|
|
|
|
FLUSH MOUNTING ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*PREMARKED MODULE COVERS, INTEGRATED ON THE FRAME.
*FRAME SEPARATED FROM DIN RAIL FOR CABLE CONNECTION AND INSTALLATION AFTER PAINTING.
*TRANSPARENT DOOR WITH LOCKING DEVICE ON OPENING.
*ENCLOSURES WITH MULTIPLE HORIZONTAL AND VERTICAL MODULAR COMBINATIONS BY MEANS TO ITEM GR11028.
*MARKED CE
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
SURFACE ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*REMOVABLE FLANGE TO SIMPLY SWITCH HOUSING AND WORK INSIDE THE DISTRIBUTION BOX.
*THE FLANGE ON THE INNER SIDE, NOT VISIBLE FROM THE OUTSIDE, IS PRE -CUT FOR ALL STANDARD TUBE AND CABLE-TRAY DIMENSION.
*THE DIN PROFILE FOR HOUSING THE SWITCHES IS HIGHER OFF THE BOTTOM TO PERMIT ALL TYPES OF WIRING WITHOUT ANY SPACE PROBLEMS.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*IN COMPLIANCE WITH CEI 23-48 -I ED.1995 PRODUCTS MEETING ESSENTIAL REQUIREMENTS OF L.V.D. 73/23/EEC AND FURTHER AMMENDMENTS ( IEC 760 2 ED 1989, AM 1/1994 AND MODIFICATIONS PR. EN60670 )
*MARKED CE AND IMQ.
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
|
|
|
|
|
|
The Tern Way 800 pan assembly has been designed for easy installation, ideal for switchboard manufacturers and a wide range of specifications. A short time withstand rating of 35kA or 5()kA for I second makes this assembly one of the most versatile on the market. Busbar raiings are available at 800A and 1250A.
Key Features
• Busbar assembly and MCCBs manufactured in U.K.
• Fully shrouded busbars.
• Four possible frame sizes for outgoing MCCBs.
• Shrouding to IP20 protection.
• Terminal covers available for both line and load side terminals. (line side fitted as standard).
• All MCCBs are padlockable in both ON and OFF position.
• Easy connection onto assembly.
Specification
Manufactured in accordance with BS 5486 Part 1 (1990)/ EN 60 439-1 (1990). Busbar ratings 800 Amps and 1250 Amps. Fully tested for both 35kA and 50kA short lime withstand for 1 second. 6. 12 and IS triple pole versions which accept outgoing MCCBs from 125A frame size single pole to 250A frame size triple pole. 3 way triple pole version which accepts outgoing 400A frame size triple pole MCCBs.
|
|
|
A range of truly versatile MCB distribution board systems providing unobtrusive final circuit management solutions for applications up to 200A. The range offers robust TP&N and SP&N distribution boards with an extensive selection of MCBs, RCBOs, RCCBs, switch disconnectors, MCCBs, fuse switch incomers, service centres and modular control and command devices.
|
|
Deep Drawn aluminum enclosures are our specialty. Zero Manufacturing perfected the deep draw process, and now we have the largest range of tooling in the world. No matter what the required size and shape, ZERO can handle any deep drawn requirement.
The numerous advantages of deep drawn aluminum products are clear. ZERO uses only the highest grade aerospace aluminum throughout the deep drawing process; these light weight aluminum alloys, known for their strength, are also incredibly resistant to corrosion. Aluminum enclosures provide excellent resistance to breakage and fractures, and optimal protection against water and even salt damage.
In-house customization and modifications are available for all our aluminum products. For seamless, draft-free construction in aluminum enclosures, precision miniatures, or deep drawn cans look no further than ZERO for all your manufacturing needs.
|
|
GRP INSTRUMENT ENCLOSURE (MODEL CP)
Instrument enclosures are used to protect instrument from corrosion, chemical attack, mechanical abuse, freezing and weather.
They are made in GRP ( Glass Reinforced Polyester ) with stainless steel hardware and closed cell neoprene gasket.
ENCLOSURE SPECIFICATION
Made by two identical mouldings
Light grey colour
Waterproof construction
Antistatic
Fire retardant and self extinguishing
UV resistant
Non absorption of hydrocarbons
ACCESSORIES
Viewing window
Insulation for heat retention
Electrical heating
(for hazardous or non hazardous area)
Steam heating
Thermostat
Wall or pipe stand mounting bracket
Internal mounting bracket
Grommets, cable gland, bulkhead compression fittings
Identification label
Enclosures can be supplied fully assembled with instrument, manifold and accessories, ready to be installed on field.
|
|
Flush mounting enclosures with horizontal door
Flush mounting enclosures with vertical door
Surface mounting enclosures IP40
IP40 surface mounting enclosures with vertical hinge
IP55 surface mounting enclosures with horizontal hinge
Surface mounting enclosures series 18
Surface mounting enclosures series 20
Accessories for enclosures
|
|
Hawke International, a member of the Hubbell Inc group of Companies, has over the last 50 years, built a world-wide reputation in the hazardous area and hostile environment markets, with an innovative range of cable connection, termination and barrier products.
Our GRP Enclosure range is the ultimate in robust construction featuring Anti-Static Properties, External Mounting Feet, Corrosion Resistant Stainless Steel Lid Fixing Screws with Nylon Retaining Washers, One Piece Durable Captive Moulded Silicone Gasket and Stainless Steel Rating Label and includes the innovative new PL626 Enclosure.
Our Stainless Steel Enclosure range features a Robust Stainless Steel Construction, Electropolished Surface Finish, Softer Finished Rounded Edges, Rigid Slotted External Mounting Feet, Superior Silicone Sponge Gasket and includes the ground breaking new EZE range.
|
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
|
|
