|
|
Safety enclosures for explosive environments are meant to
be used in areas with explosion risk 1, 2, 21 and 22 gaz « G »
and dust « D » according to 94/9/CE directive.
They ensure emergency stop, load break for electrical
maintenance and switch disconnection next to all low voltage
network.
|
|
- Control housings from aluminum
- Support arm systems
- Control housings from steel sheet with the series "BAE" and "BAV"
|
|
|
|
|
|
The new IDG-A1 DIN rail mount enclosure is ideal for applications requiring a housing for smaller pcbs and minimal DIN rail space loss. The IDG-A1 has sleak lines, making this an attractive packaging medium for applications such as home/building automation.
This enclosure has been designed according to DIN 43 880, providing the dimensions and specifications required for installation component standards. Conforming to VBG 4 and IEC529/DIN VDE 0470-1, the IDG-A1 prevents accidental shock and injury while meeting the requirements of the automation industries.This new housing enables users to incorporate one vertical pcb and a top horizontal pcb or three horizontal pcbs. The top horizontal pcb is ideal for holding signalling devices/indicators and switches. Fully populated, the terminal blocks have a maximum of 12 screw clamp terminals. For applications not requiring all 12 I/O positions or requirements for additional internal space, selective loading may be done, with empty positions being filled with blind plugs.
|
|
The lid stay of the one-piece consoles is locked against unintentional closure.
Maximum space for cable entry with divided gland plates.
The mounting plate is height-adjustable by 2 x 40 mm, e.g. with deep installed equipment in the lid or cable entry from the rear.
Material / Surface finish
Material:
Stainless steel 1.4301
Enclosure: 1.5 mm
Door or double door and console lid: 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure, door and console lid: Brushed, grain 120
Mounting plate: Zinc-plated
Supply includes
Enclosure, solid rear and sides, door or double door at the front, with locking rod, console lid with lid stay and stainless steel cam latched in the enclosure, two-piece gland plate, mounting plate, zinc-plated, passivated.
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures. The enclosures dimension start from 50X65X55 to 600X800X280 mm and DSE have 400 kinds of enclosures-! Refer to the gereral catalogue of HIBOX in Direct-Industry or www.dsehibox.com
|
|
DISTRIBUTION ENCLOSURES
ECOLOGY series of distribution enclosures can be sealed and they are provided with opaque or transparent (UV protected) reversible windows. They are made from halogen free longlasting plastic material and equipped with dust caps for wall mounting screws and 1/4 quick locking unloosable screws.
They have supports for mounting plates fixing, they are prepared for installation of earth and neutral bars and cable entries are adapted to the metric system. On the 26 and 57 modules versions DIN rail can be adjusted on its height.
|
|
ES, the free-standing enclosure with firmly linked side panels.
TS 8, the Top enclosure system, a system platform for individual tasks.
Every enclosure, with all-round accessibility, is a specialist – however particular the task in hand.
|
|
All of DSE HIBOX products are Water-proof and Dust-free. (IP 66-67, NEMA 4X) HIBOX received UL 5VA. That means HI-BOX products have been perfected to the highest commercial standards through reinforcement of the box's thickness by more than 30% over existing plastic electic enclosures.
DSE Electronic Box has been developed to protect electrical and electronic components in wet, dusty, and hazardous environments.
|
|
Under ATEX, the requirements placed on EX enclosures for use
in explosion hazard atmospheres are high.
For this reason, Rittal refuses to compromise in this area. Enclosure concepts proven a million times over are tailored to the specific Ex requirements.
The results is a series of empty enclosures providing ideal conditions for applications in the chemicals
and petrochemicals industries, in the offshore sector
and in the foods industry.
|
|
|
|
|
|
Our product range contains a wide variety of enclosures which offer a selection of sizes, designs and materials. It is designed for single installations as well as for large distribution units. The dimensions of the enclosures are so designed that they can be combined into a large modular unit. A large number of components, such as contactors, switches, instruments and PLCs can be built into these enclosures. Naturally, customer-supplied equipment layout is designed by us to customer's requirements. Cable entry is either direct (cable glands or conduit entries) or indirect via en EEx e housing (stud-type or conductor bushings).
The design and installation of explosion-protected distribution and control boards having flameproof enclosures require considerable experience and careful consideration of relevant regulations in relation to the application data. Only thus are technically and economically satisfactory solutions, which combine a user-friendly design with a high degree of safety, possible. In addition to Ex-regulations, the general regulations must all be bserved in the assembly of distribution and control boards.
Standard industrial electrical equipment can be bult into enclosures. It is, however, subject to a "type test" by a recognised testing station. R. STAHL has such certificates issued by PTB permitting the assembly of explosion-protected systems for all standard applications.
|
|
Beautiful appearance, excellent processing and stability should be guaranteed by material such as High Intensity ABS, PC, AC, and Polyester assured, Flammibility material and Glass 30% annexing material. The products was recognized by the Public Trust International Mark Germany VDE, TUV European Community CE and USA Underwiters Laboratories. The use is convinient for the installation of Terminal Box, the supply Swithchboard, Apparatus Box, electrical power supply and Control Box etc.
HIBOX has a various kinds of terminal box. The dimension is from 190x190x130 to 380x560x180mm. Also these boxes can be customized by cutomer's order. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
The one-piece desk is used in simpler applications but still offers an up-to-date technical specification.
These styles have bottom entry gland plates with an adjustable, removable section and an adjustable mounting plate.
Accessories are common to the three styles. The shelf lid of LE-ME and SBA are supplied with gas springs.
The design concept of the PE console allows the installation of racks or monitors and a supplementary casing can be fitted up to the back to increase the usable depth to 500mm.
The cabinet desks are manufactured from pressbent and welded 1.5mm and 2mm sheet steel.
The ZBA control desk range has been manufactured in parallel to the SBA range to meet simpler applications.
|
|
Simplify your next operator interface project with a STRONGARM mounting and enclosure combination.
Enclosures are designed to your exact terminal specifications; including the cut-out, cable space, drive access and cooling requirements. Specify pushbutton cut-outs and other extras to complete the ideal, hassle-free enclosure to complement your STRONGARM mounting. Enclosures are specially reinforced for pendant arm mounting to assure solid, wobble-free operation.
Features:
• Operator "friendly" interface
• Compact and repositionable including three levels of vertical travel (13", 23", 30")
• Internal, local, or remote PC (Internal MicroBox PCs available from STRONGARM)
• Multiple keyboard and pointer selections (including STRONGARM's revolutionary Stainless Steel Mouse)
• Feature panel for easy pushbutton additions
• Post Mount, Machine Top Mount, Wall Mount and Ceiling Mount available
• Horizontal and vertical extension capabilities
|
|
Desktop housings are available in different sizes and types. They offer designer aesthetics for interior applications.
Your advantages:
- Generously dimensioned, comfortable control and interface panels.
- Ergonomic shape.
- The PCBs can be fitted on both sides with interfaces that project beyond the actual width of the case.
- Non-slip pads for secure table top applications.
- Easy mounting.
- Comprehensive range of accessories.
|
|
The comprehensive range of boxes for potting electronic assemblies. With special cost advantages for series-type production.
Potted assemblies are protected from shock as well as temperature, dampness and chemical influences. The versions made of Duroplast are not highly resistant to fracture.
|
|
-Molded hinge type&latch type
1. Molded hinge&latch design is easy to separate the cover from the base for printing or processing holes&cutting.
2. It protects inner components from dirt, dust, oil, water by roof guard on top&cover gasket.
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 46 kind sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket
|
|
|
The FAMI polypropylene stacking and storage containers have been designed and produced to offer companies rational solutions to their various material storage and handling requirements. First class raw materials, together with detailed structural research are the basis for this top quality product. The wide range of containers is available in five colours to allow the storage of materials in easily recognisable categories.
|
|
This enclosure is NE-1515: The dimension is 150X150X90 mm.
We have enclosure from 50X65X55 and 80X82X60 mm
We have a various of this kinds of small plastic enclosures.
Just check them out at www.dsehibox.com
IP66-67, UL 5VA 4X type
-1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation
-Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests.
-Convenient to use for console-alternative rail and button box, mini terminal, signal box, gauge/meter console, communication connection box and etc.
Refer to the general catalogue of HIBOX on Direct-Industry.
|
|
The OKW small plastic enclosures covers many different fields of application.
OKW products are incomparable in design and, thanks to their high level of technical development, are the ideals solution for comfort-oriented case users who are looking for something special.
Our wide range of services allows us to find fast, cheap, individual solution for you.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
The CC-4000 SL is a perfect addition to the existing Bernstein
control housing range CC-4000 thanks to its elegant, slim-line
profile.
This high quality dynamic housing will enhance the appearance
of any modern machine or system. Available with either 55 or
99mm external depths, the system profile can be tailored to
match the exact size of the control unit (HMI, IPC etc.).
Controllers can be mounted easily, economically and securely
thanks to the many excellent technical properties of CC-4000 SL.
|
|
|
A wide range made up of monobloc enclosures for wall or floor fitting, made in sheet steel painted with polyester resin or manufactured in stainless steel. Combinable modular enclosure systems, ideal for building up large frames and control desks.
|
|
Console system
Flexible console system, allows a versatile number of combinations to configure the system to your design. A range of 19" accessories adds further versatility. Available in both Mild and Stainless steel.
- MPC / MPCS, Console combination version, single or double door
- In mild steel and stainless steel
- MPG / MPGS, Console compact version, single or double door.
- In mild steel and stainless steel
|
|
Wall mounting enclosures :
The balance between pure design and total pragmatism is never easy to achieve. The unique Eldon Multi-Mount® enclosure will make your specifi cation and component requirements easier to come up with. Making your enclosure both practical and aesthetically pleasing at the same time.
Floor standing enclosures :
Nowadays, mounting speed is one of essence and Eldon Multi-Flex® enclosures belong to the fastest you'll fi nd on today's markets. With fewer parts than our previous designs, which means that availability of the parts you need is always high.
|
|
Features :
Net-Access™ Server Cabinets
- Inset frame posts create large and accessible vertical pathways for routing cables and mounting vertical patch panels and Power Outlet Units
- Include vertical blanking panels to block bypass air and direct cold air through servers
- Modular cable management finger sections manage cables for greater routing flexibility
- Innovative, fully integrated, electrically bonded cabinet with a single ground connection to guard against EMI and ESD, and provide a safe current path to ground
- All welded frame construction
- Adjustable rear cage nut mounting rails
- Doors include keyed swing latches
- Side panels include keyed pushbutton latches
- Equipment mounting depths up to 29" (736.6mm)
- Durable black polyester epoxy powder coat finish
- UL Listed 2500 lbs. (1134 kg) load rating
- Cabinet ships assembled, one per pallet
- For the complete grounding solution, see the StructuredGround™ Kits for Cabinets
|
|
Weidmüller offers a wide range of enclosures for the protection of circuitry, components and devices. These products have been developed to suit a wide range of applications and environments.
|
|
Plastic modular electrical enclosure mini Pragma
Description
Plastic modular electrical enclosure flush mounted or surface mounted
Plastic modular electrical enclosure range, surface mounted or flush mounted, 50 to 63 A
From 1 to 3 rows
From 4 to 36 modules
Translucent tinted or white door
Options
Flush mounted : 5 colors (white, ivory, mist grey, pistachio, garnet)
With or without terminal blocks
Lighting indicator function
Lock
|
|
|
An extensive range of enclosures and accessories that let you install any voice and data application in any area, be it industrial, services or tertiary sector.
|
|
Each model includes two aluminum end panel and all hardware
PCB can be slide into internal slots pre-extruded in the enclosure body
The depth of enclosure body is variable upon customerfs request
Surface of enclosure is painted in black(35A series)or clear anodized(35C series)
The 35C series enclosure includes two plastic bezel kit(UL 94-HB)
Custom special colors available upon requirement
|
|
|
|
