|
|
In addition to 16 standard sizes for each type, Alupla and Aluplan 100 give yu the option of low-cost manufacture of special dimensiona for variable use.
Thanks to its stability, this aluminium enclosure is ideal for use as a wall, desktop or mobile unit.
The intelligent designof the side profiles makes it possible to insert PCBs on different levels.
Seals specially designed to the match the enclosure offer protection category IP 65 for dimensions up to 1 m x 1x m.
|
|
The new concept for applications in measurement, control and automatic control technology.
The design-orientated BOCARD enclosure system is available in 3 basic sizes.
For each size, 2 bases with different heights can be combined with 5 different lid variants. This range of combinations ensures that the enclosure is suitable for an extremely wide range of applications. An additional important feature of BOCARD is the variable terminal compartment, which is an integral part of the design. The terminal compartment can be kept separate from the electronics compartment by means of dividing panels. High parts such as double-deck terminals can also easily be incorporated.
The enclosure with a clear hinged lid or membrane lid provides ingress protection IP 65; all other types provide ingress protection IP 40.
A wide variety of accessories completes the range of products.
As a professional and competent partner in the field of system solutions, in addition to mechanical processing, BOPLA also offers customer-specific membrane keypads or the assembly of complete enclosures including electronic components.
|
|
- Internal separation from Form 1 to Form 4B
- Fixed units (FFF)
- Removable units (WFD)
- Withdrawable units (WWW)
Different types of functional units can be mixed within the same assembly or section, in order to efficiently meet requirements regarding continuity of supply, service conditions or budgetary constraints.
|
|
BOTEGO, BOPLA´s enclosure system, sets new standards in enclosure technology.
Thanks to its design, the enclosure, consisting of two plastic half-shells, can be inserted either horizontally or vertically.
Extension sets permit optimal adaptation to the relevant space requirements.
The ergonomically shaped operating front permits user-friendly operation of the equipment.
The ergonomically shaped operating front permits user-friendly operation of the equipment.
In order to achieve natural convection everywhere in the enclosure, the system was developed in such a way that sections with air vents can be mounted directly over each other or also staggered.
The snap-lock technology, which considerably reduces the amount of mounting time and work needed, is a new technological development.
With BOTEGO, every user can create his or her own individual design. Different design elements and caps in 6 different colours can modify the basic neutral enclosure to create an individual touch.
All the elements which vary the design are available ex works.
For enclosure surface designs, BOPLA offers both standard decor foils and customer-specific foils-shape, colour or embossing can be selected individually.
|
|
HI-BOX's Wall mounting enclosures are manufacured by HI-resistance polycarbonate, polyester, and ABS. These wall mounting enclosures are suitable for fire-fighting and environment facilities. (good for outdoor) There are two kinds of enclosures: one is hinge type. The other one is screw cover type. We provide working for hole on enclosure by request. Also, we serve for supplying HI quality products with wide color tone and various colors in accordance with your requirement.The dimension of HIBOX's NICE BOX is from 100x130x70 mm to 500x700x 250 mm. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67, NEMA 4X)
Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
QUICK
QUICK wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS withstanding harsh industrial and outdoor environments. These cabinets are equipped with quick screw covers. Transparent cover options allow easy viewing of installed equipment and indicators.
Dimensions range from 300*200*170 mm to 600*400*270 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
ATEX
EX enclosures are specially made for use in hazardous environments. They are designed, manufactured and tested to international standards. All certificates, such as ATEX, are issued by the manufacturer under license from a test authority. EX enclosures are made of either aluminium, polycarbonate or polyester.
- Aluminium from 45*50*32 to 600*310*180 mm
- Polycarbonate from 188*188*130 to 558*378*180 mm
- Polyester from 75*80*55 to 405*400*120 mm
AL: (ALX) IP 66; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13
PC: (FEX) IP 66; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
PE: (PEX) IP 66/67; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
|
|
Features:
- Basic structure of the box by two side aluminium extrusion profiles, steel lid/base covers and plastic brackets, to which are fixed both panels.
- Side profiles include rails for mounting PCB's or other components.
- Front brackets include handles in 5, 6, 7 sizes, with lids that can be customized with corporative colour.
- Lid and base cover can be dismounted independently.
- Ventilation slots are provided on rear part of lid and base covers.
- The four small-profile sizes has four non-slip feet. The three larger sizes are supplied with tilt-feet.
- Resistant to temperatures up to 85ºC (plastic pieces ).
|
|
We supply 43 different dimensions of enclosures. We are able to deliver the main dimensions needed but also with some specificities like the inversed dimensions (400x600, 600x800, 800x1000).
Our main advantages are the reversible doors, reinforced doors, very wide glande plate for several cable glands, polyurethane gasket injected continuously by the most advanced technology.
This range is completed by a full list of accessories : internal door, depth adjustable bracket, roof, supporting pole, a wide range of locking, modular chassis, ...
|
|
| ... products without technical information |
| |
|
Both sample holders are made of OHFC copper and nickel plated for minimum emmissivity. The optical sample holder is designed to hold 25.2 mm (0.99 inch) x 1 mm thick windows. The resistivity sample holder has a sapphire window with four .032 diameter copper pins epoxied in place. All other dimensions of the resistivity sample holder are the sampe as those of the optical sample holder.
|
|
|
Irrespective of the shape of the product to be carried, plastic component holders can be moulded to almost any desired shape and represent a cost-effective alternative to other forms of packaging. Component holders are more than just a medium in which products can be placed for safe transportation. They provide a means of temporary storage and can be made available "just-in-time" for finishing. Thermoformed component holders can be produced in sizes from 400x300 mm to 1000x1200 mm. Depending on the application, they can be designed to allow stacking or alternate stacking. Utz component holders adhere to very strict tolerances and guarantee an excellent fit.
|
|
- Integrates with all automated handling systems,
Eureka is fitted with locations for robot handling in
both horizontal and vertical planes.
- Optional anti-slip hand holds for operator comfort and security.
- Can be fitted with a tamper evident security seal.
- Pimple pads on all four sides and on lid allow the easy removal
of adhesive labels without leaving a sticky residue.
- Optional card clip can be fitted to all four sides.
- Available with reinforced base for handling heavy loads.
|
|
Manufactured from quality moulding and metal components to ensure a secure and reliable connection, Bulgin’s battery holder range caters for battery sizes 1/2AA, AAA(R03), AA(R6), C(R14), D(R20) and PP3(6R61), accommodating 1, 2, 3 or 4 cells.
There’s a choice of fixing styles including screw and flange panel fixing, PCB and base mounting versions.
The panel mounting versions are now available in two styles; standard fixing and front panel sealed to IP67, extending the applications into harsher external environments where dust or water would inhibit equipment operation.
The open frame styles are designed to be either PCB or base mounted and most have an interlocking facility to join adjacent holders together.
Principle applications include portable equipment and memory back-up.
|
|
... see all the products in the category
Batteries
|
Universal swivelling and angle of inclination
– steplessly by means of scale of 0° – 225° adjustable
– hydromechanical wedging:
• absolutely maintenance-free
• Retaining strength to 5000 Nm torque
– with other system parts combinably
– horizontal and vertically usable
– powder-coated
|
|
Bluid-in Zeropoint Quickclamping cylinder K10, K20, K40, square
Hydraulic release
Cover and piston hardened
Repeat accuracy < 0,005 mm
Assembling diameter: K10: Ø50mm, K20: Ø78mm K40: Ø102mm
Max. pull in force 40 kN (hydraulic)
Max. pull in force 30 kN (pneumatic)
Max. holding force 105 kN
Use:
Can be used as a single clamping point or combined with round installation Zeropoint Quickclamping cylinders in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. A square Zeropoint Quickclamping cylinder prevents the pallet from twisting. The indexing function enables positioning every 90°. Specially suitable for use in turning.
Note:
The installation Zeropoint Quickclamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. Square pallet for screwing onto the pallet see item no. 6370ZA.
On request:
- Installation diagrams on request
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
|
|
Bluid-up Zeropoint Quickclamping cylinder K10, K20, K40, square
Hydraulic release (or pneumatic)
Cover and piston hardened
Repeat accuracy < 0,005 mm
Size: 85x85mm, 120x120mm, 150x150 mm
Pull in force 40 kN (hydraulic)
Pull in force 30 kN (pneumatic)
Holding force 105 kN
Use:
Can be used as a single clamping point or combined with round surface-mounted Zeropoint Quickclamping cylinders in machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flanges no. 6370ZB). Clamping flange size 20 for K10, size 40 for K20, for K40 integrated onto the housing.
Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The Zeropoint Quickclamping cylinders are mechanically locked in the clamped position. The ad-vantages of this are that there are no cumbersome lines and no danger of leakage. The hydraulic version has 1 connection for clamping / unclamping (G1/4 or G1/8). Square pallet for screwing onto the pallet see item no. 6370ZS.
On request:
- Automation solutions such as media ducts, sensor of locking monitoring, blowing off and isolated applications
- Can also be supplied with centering pins for quicker and more precise installation
|
|
Precision, height adjustable, vibration damping machine mounts for accurate, efficient and economical machine installation
Typical applictions: Machine tools, Rubber machinery, Printing and Packaging Machinery, Injection Moulders
|
|
MTC™ Conversion Components
A support blade, a clamp and a stop mount to existing Square Shank and Right Angle O.D.
Grooving Toolholders to create a mounting area comparable to that of MTC™ Integral Shank Toolholders. Once the components are installed, any of the MTC™ Inserts can be used in the toolholder.
Get more out of your existing Deep Grooving System with
MTC™ Conversion Components.
• More speed and feed
• More chip control
• More tool life
• More Depth of Cut
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
