|
|
|
ARETA is not just a Modular cabinet but a complete system, which allows several solutions for the distribution and automation business. Thanks to the well designed orthogonal joint, the cabinet can be mounted in only a few minutes. The mounting operation is restricted only to 8 screws and all the other alloy manufactured accessories (hinges, fixing elements, etc.) are ready to be used. The cabinet profile has been well engineered and the result provides all the safety, strength and modularity standards. Profile and orthogonal joint are welded together using the very latest in laser welding technology.
|
|
|
|
|
|
The recently developed CUBEx control enclosure product line from R. STAHL now makes it possible to combine compex control and distribution panels into comprehensive, space-saving units. Adds a whole new dimension to individualised and flexible solutions for your applications. Other customer-specified control and distribution panel designs are also possible. The CUBEx system increases the flexibility of your applications and ensures that all internationally recognised installation technologies can be employed. All standard, commercially-available electrical equipment can be installed. The space-saving design of this IIB enclosure enables a mounting distance of just 10 mm between units. Moreover, flameproof enclosures incorporating "D2D" technology enable the direct connection enclosures or terminal chambers are required. CUBEx is the logical next step in the development of IIC tchnology integrated in the renowend 8220 Series. For use in Group IIB hazardous areas in Zone 1 and Zone 2 or Zone 21 and Zone 22.
The main connection switch of the lighting and heating panels CUBEx Series 8264/5-ExV is operated through the side wall via an actuation mechanism. The circuit breakers are fitted on the second mounting level and are actuated via totary drives. As an option it is possible to fit test keys to the ELCBs to make it possible to actuate the back wall of the enclosure for fixing the devices. Cable entry is done directly via tapped holes, wired directly to the switches. For current distribution the original comb type rails are used at the switching units. A typical design allows for 12 or 24 circuit breakers. Different designs upon request.
|
|
We design and assemble electric panels for:
- Driving DC motors with their own drivers and protections
- Startup controls and protections for AC motors
- Panels with converter and synchronized inverter slots
- Commands and signaling for many applications and functions
- Control and automation of many different machines
|
|
|
|
|
|
DIDO-S distribution boards are available in two types: surface mounted and flush mounted boards.
Particular attention has been set to the need to give more space in the inside in order to facilitate the operations of
wiring therfore favoring the simplicity of instalation.
PE4, PE8 and PE12 boards have a particular system to fix the DIN rail; it allows to regulate its height in two positions, an
inner and an outer.
Some Flush mounted boards (CMR) answering the demands of space saving products - more compact enclosures.
All distribution boards have DIN rail and brass terminal block (earth and neutral).
The particular structure of the lid, limits the board prominence from the wall of only 20 mm, creating a product of
discrete design and presence.
The interchangeability among the doors (transparent and opaque) and their reversibility together with the large
space for the assembling make these series very versatile.
Always careful to the demands of the clients, all products are protected with a thermo-retracable film.
|
|
|
|
|
|
FLUSH MOUNTING ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*PREMARKED MODULE COVERS, INTEGRATED ON THE FRAME.
*FRAME SEPARATED FROM DIN RAIL FOR CABLE CONNECTION AND INSTALLATION AFTER PAINTING.
*TRANSPARENT DOOR WITH LOCKING DEVICE ON OPENING.
*ENCLOSURES WITH MULTIPLE HORIZONTAL AND VERTICAL MODULAR COMBINATIONS BY MEANS TO ITEM GR11028.
*MARKED CE
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
SURFACE ENCLOSURES
*MADE FROM ABS TECHNOPOLYMER MATERIAL, WITH THICKNESS THAT ENSURE MAXIMUM STURDINESS AND STRENGHT IN EVERY POINT.
*REMOVABLE FLANGE TO SIMPLY SWITCH HOUSING AND WORK INSIDE THE DISTRIBUTION BOX.
*THE FLANGE ON THE INNER SIDE, NOT VISIBLE FROM THE OUTSIDE, IS PRE -CUT FOR ALL STANDARD TUBE AND CABLE-TRAY DIMENSION.
*THE DIN PROFILE FOR HOUSING THE SWITCHES IS HIGHER OFF THE BOTTOM TO PERMIT ALL TYPES OF WIRING WITHOUT ANY SPACE PROBLEMS.
*WORKING TEMPERATURE -15° C TO +60° C
*RESISTANT TO HEAT UP TO 650° C GLOW WIRE TEST ( IN CONFORMITY WITH STANDARD: EN60335-1:94 +IEC 695-2-1 ).
*PROTECTION DEGREE IP40.
*IN COMPLIANCE WITH CEI 23-48 -I ED.1995 PRODUCTS MEETING ESSENTIAL REQUIREMENTS OF L.V.D. 73/23/EEC AND FURTHER AMMENDMENTS ( IEC 760 2 ED 1989, AM 1/1994 AND MODIFICATIONS PR. EN60670 )
*MARKED CE AND IMQ.
*AVAILABLE ON REQUEST WITH HEAT RESISTANCE 960 °C GLOW WIRE TEST
|
|
|
|
|
|
The Tern Way 800 pan assembly has been designed for easy installation, ideal for switchboard manufacturers and a wide range of specifications. A short time withstand rating of 35kA or 5()kA for I second makes this assembly one of the most versatile on the market. Busbar raiings are available at 800A and 1250A.
Key Features
• Busbar assembly and MCCBs manufactured in U.K.
• Fully shrouded busbars.
• Four possible frame sizes for outgoing MCCBs.
• Shrouding to IP20 protection.
• Terminal covers available for both line and load side terminals. (line side fitted as standard).
• All MCCBs are padlockable in both ON and OFF position.
• Easy connection onto assembly.
Specification
Manufactured in accordance with BS 5486 Part 1 (1990)/ EN 60 439-1 (1990). Busbar ratings 800 Amps and 1250 Amps. Fully tested for both 35kA and 50kA short lime withstand for 1 second. 6. 12 and IS triple pole versions which accept outgoing MCCBs from 125A frame size single pole to 250A frame size triple pole. 3 way triple pole version which accepts outgoing 400A frame size triple pole MCCBs.
|
|
|
A range of truly versatile MCB distribution board systems providing unobtrusive final circuit management solutions for applications up to 200A. The range offers robust TP&N and SP&N distribution boards with an extensive selection of MCBs, RCBOs, RCCBs, switch disconnectors, MCCBs, fuse switch incomers, service centres and modular control and command devices.
|
|
GE's industrial-duty switchboard product lines Power Break® II and AV-3 AccessTM
Power Break II (PB) switchboards can house insulated case circuit breakers as mains, ties, and feeders; and low voltage power circuit breakers as mains and ties. AV-3 Access (AV3) provides individual compartments for molded case breakers serving as mains, ties, or feeders.
Feature:
Rugged construction - Designed bus structure (30 cycles )
Fast cycle times
Broad Functionality
Multiple locations
Cost effective design
|
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
Switch and control systems
- Electric switch and control systems
- Marshalling and distribution panels
- Electrical switch panels in accordance with national and international standards
- Special cabinets (steel, stainless steel, aluminum) for instrumentation, control and electro-technics and for use in hazardous areas
BARTEC BENKE designs and manufactures control system solutions for automation of machines and processes.
|
|
There is a total of more than 50 production staff spread over five assembly shops and a test workshop.
We have spent the last 40 years making electrical cabinets; this has enabled us to build up a very significant experience. Our way of working consists in helping and advising our customers as from the development of their project. We suggest that the end product is pre-accepted or accepted on our premises, in order to make sure that it corresponds exactly to your needs.
Thanks to our teams' expertise, we are able to manufacture the following complex technical units:
- tertiary cabinets,
- modular cabinets,
- automated system cabinets,
- TGBTs (general low voltage panels),
- machine-tool cabinets,
- pneumatic cabinets,
- 1-2-3 type units with service indices ranging from IS 111 to IS 333.
|
|
| ... products without technical information |
| |
DC Electric Micro Gearmotor
* Gear Coreless motor
Diameter : Ø7 to 18 mm
Voltage 3 v to 12v
Gear type: Spur gear :Planeteary gear
Several gear ratio are available
* Gear Brushless motor
Diameter Ø1.5 to 30 mm
Voltage 3 to 24 v
Gear type : Spur gear , Planetary gear
Several gear ratio are available
|
|
DC Planetary Electric micro gearmotor
Diameter : Ø2mm to 18mm
Voltage : 3 v to 12v
Planetary gear ratio: 6:1 ,4.7:1,13.1:1,22,1:1,61.1:1,105.1:1,288:1,494:1
Motor type : Coreless motor or Brushless motor
Feed back device are available.
Application
- Medical equipment
- CCTV
- Robot
- Chip Mounter
- Measuring Equipment
|
|
MODEL SERIES - DC42/ DC52
PMDC GEARED MOTOR
Design - Motor DC42/DC52 is a heavy duty carbon brush DC motor which is used in combination with GBW gearhead only. Gearhead GBW contains heavily loaded steel gear wheels. The spur gears are fixed on steel spindles which are hardened and polished to a mirror finish & rotate in sintered bushings. The thick output shaft rotates in robust sintered bushings. All the gears are housed in between metal plates & closed by plastic dust cover. All bearings are permanently lubricated and therefore require no maintenance. Linear drive also possible on request.
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
|
|
We are pleased to introduce the new BLDC brushless micro gearmotors. This new series completes Intecnos range of DC micro gearmotors and offers ideal solutions for sectors such as industrial automation, automatic doors and windows, vending and many others.
The BLDC motors from the BL series are available in 3 sizes (torque from 0,05 Nm to 0,43 Nm) and they can be supplied with an integrated (IE version) or external drive. They are compact and low-cost being equipped with Hall sensors. These motors have a low voltage 24V, which optmises safety in the workplace, particularly in applications where the worker can be in direct contact with the motor.
To complete the gearmotor, we would use the reliable micro planetary gearbox from our standard series.
Gearmotors made up of BL motors and LN (low noise) gearboxes are particularly suitable for applications in the medical field and for applications that require a controlled movement.
|
|
|
|
|
|
The new Intecno micro gearmotors series characteristics:
- Coaxial arrangement of the input and output
- Compact design
- Advantageous torque with minimum space requirements
- Low moments of inertia
- Suitable for continuous, reversing and intermittent operation
- Can be installed in any mounting position
Planetary gearboxes stand out for having a wide range of reduction ratios, It’s possible to obtain a total of 72 reduction ratios from i=3.7: 1 (1 stage) to i= 2076:1 (4 stages). Planetary gearboxes are lubricated with grease and are therefore maintenance-free.
This product can be personalized due to the possibility of using metal, plastic or material mix versions. The LN (low noise) version is also available: It significantly lowers the gearbox noise.
The distinguishing features of D.C. motors in general are their high start torque as well as a torque/speed ratio suitable for high work loads. Another important characteristic of the D.C. motor is its density.
Features:
- Magnetic field generated by permanent magnets
- Available in 5 sizes: diameter 35,42, 52, 65, 80 mm
- Low voltage power supply, 12 or 24 Vdc
- Power ratings available from 8 to 140 W S2
Intecno micro gearmotors are perfect for many applications, in any sector where both small dimensions and good performances are required. These characteristics are important in the medical sector, robotics and also in electric vehicles. Other important fields are shutters for windows/doors where the movement required can be obtained by Intecno’s small DC motors and planetary gears. Options such as a bearing mounted input shafts and DC motor controls are also available to complete the product.
|
|
No cogging or preferred rotor position
No hysteresis or eddy current losses
Extremely low current consumption
Ultra flat dimensions
Extremely light and compact
Smooth and accurate speed control
Speeds up to 60,000 rpm
High power rare earth magnets
Electronic commutation for extremely long operational lifetime
High precision gearboxes available
Control electronics available for all motor series
Custom systems available from design to production
Autoclavable and vacuum rated motors available
|
|
|
High quality 3 pole 12mm ferrite motor with a spur gear open gearbox, steel geartrain and sintered bronze bearings. The double shaft unit features an ungeared extended shaft protruding from the motor case. This is suitable for mounting encoders or other drive components for feedback control or actuation. Used by modellers for animating static displays, robotics enthusiasts, and industrial actuators (e.g. locking mechanisms). Originally designed for focusing rings on professional video cameras.
|
|
GM Series
GM12
10mm x 12mm 6V or 12V DC gearmotor, available in five gear reduction ratios. 30:1, 63:1, 100:1, 210:1 and 298:1
|
|
|
High precision planetary (epicyclic) gearbox coupled to a 3 pole 12mm ferrite motor. The unit features a lightweight injection-moulded gearbox assembly and is manufactured to an extremely high quality. The unit was developed for generating the accurate motion required in miniature desktop printers. The planetary geared motor has a unique cross-shaped output shaft which is ideal for zero slip transmission.
|
|
MODEL SERIES - DC32
PMDC GEARED MOTOR
Design - Motor DC32 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7,GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or
steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4,GB7,GBW with M6 x 1
mm pitch screw. The linear guide & screw arrangement can be done only on special request.
|
|
MODEL SERIES - DC42/ DC52
PMDC GEARED MOTOR
Design - Motor DC42/DC52 is a heavy duty carbon brush DC motor which is used in combination with GBW gearhead only. Gearhead GBW contains heavily loaded steel gear wheels. The spur gears are fixed on steel spindles which are hardened and polished to a mirror finish & rotate in sintered bushings. The thick output shaft rotates in robust sintered bushings. All the gears are housed in between metal plates & closed by plastic dust cover. All bearings are permanently lubricated and therefore require no maintenance. Linear drive also possible on request.
|
|
| ... products without technical information |
| |
Gear Motors wirh manual chain mechanism/ with decluching.
Example:
Dalmatic gearmotor.
Type: KVRF5M 22-30 rpm.
0,5 kW motor, 3x230 V/400 V.
1" hollow shaft and manual declutching.
Option: sensor for speed control.
|
|
|
|