|
|
|
|
|
|
The recently developed CUBEx control enclosure product line from R. STAHL now makes it possible to combine compex control and distribution panels into comprehensive, space-saving units. Adds a whole new dimension to individualised and flexible solutions for your applications. Other customer-specified control and distribution panel designs are also possible. The CUBEx system increases the flexibility of your applications and ensures that all internationally recognised installation technologies can be employed. All standard, commercially-available electrical equipment can be installed. The space-saving design of this IIB enclosure enables a mounting distance of just 10 mm between units. Moreover, flameproof enclosures incorporating "D2D" technology enable the direct connection enclosures or terminal chambers are required. CUBEx is the logical next step in the development of IIC tchnology integrated in the renowend 8220 Series. For use in Group IIB hazardous areas in Zone 1 and Zone 2 or Zone 21 and Zone 22.
The main connection switch of the lighting and heating panels CUBEx Series 8264/5-ExV is operated through the side wall via an actuation mechanism. The circuit breakers are fitted on the second mounting level and are actuated via totary drives. As an option it is possible to fit test keys to the ELCBs to make it possible to actuate the back wall of the enclosure for fixing the devices. Cable entry is done directly via tapped holes, wired directly to the switches. For current distribution the original comb type rails are used at the switching units. A typical design allows for 12 or 24 circuit breakers. Different designs upon request.
|
|
Explosion-proof boxes
Explosion-proof boxes, control stations and panels EEx d IIB and IIC, aluminium alloy, steel or stainless steel (316L), with front window, box extension. Boxes assembling.
|
|
Switch and control systems
- Electric switch and control systems
- Marshalling and distribution panels
- Electrical switch panels in accordance with national and international standards
- Special cabinets (steel, stainless steel, aluminum) for instrumentation, control and electro-technics and for use in hazardous areas
BARTEC BENKE designs and manufactures control system solutions for automation of machines and processes.
|
|
|
ARETA is not just a Modular cabinet but a complete system, which allows several solutions for the distribution and automation business. Thanks to the well designed orthogonal joint, the cabinet can be mounted in only a few minutes. The mounting operation is restricted only to 8 screws and all the other alloy manufactured accessories (hinges, fixing elements, etc.) are ready to be used. The cabinet profile has been well engineered and the result provides all the safety, strength and modularity standards. Profile and orthogonal joint are welded together using the very latest in laser welding technology.
|
|
We design and assemble electric panels for:
- Driving DC motors with their own drivers and protections
- Startup controls and protections for AC motors
- Panels with converter and synchronized inverter slots
- Commands and signaling for many applications and functions
- Control and automation of many different machines
|
|
GE's industrial-duty switchboard product lines Power Break® II and AV-3 AccessTM
Power Break II (PB) switchboards can house insulated case circuit breakers as mains, ties, and feeders; and low voltage power circuit breakers as mains and ties. AV-3 Access (AV3) provides individual compartments for molded case breakers serving as mains, ties, or feeders.
Feature:
Rugged construction - Designed bus structure (30 cycles )
Fast cycle times
Broad Functionality
Multiple locations
Cost effective design
|
|
There is a total of more than 50 production staff spread over five assembly shops and a test workshop.
We have spent the last 40 years making electrical cabinets; this has enabled us to build up a very significant experience. Our way of working consists in helping and advising our customers as from the development of their project. We suggest that the end product is pre-accepted or accepted on our premises, in order to make sure that it corresponds exactly to your needs.
Thanks to our teams' expertise, we are able to manufacture the following complex technical units:
- tertiary cabinets,
- modular cabinets,
- automated system cabinets,
- TGBTs (general low voltage panels),
- machine-tool cabinets,
- pneumatic cabinets,
- 1-2-3 type units with service indices ranging from IS 111 to IS 333.
|
|
| ... products without technical information |
| |
|
GE offers a complete product range combining high operational safety with high technical characteristics.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Features:
Modules drive up to 16 SmartSwitches.
Reduces design time.
Saves on development cost.
Fully programmable using NKK software.
Single switch logic board
Supports single & bicolor LEDs
Compatible with C1601 controller
|
|
Pressure Switches
Better under pressure. For years, manufacturers and operators of heavy-duty equipment have trusted Honeywell pressure and vacuum switches. They're proven under pressure, in applications constantly under attack from chemical splashes, performance spikes and other harsh environments. These switches sense a change in the pressure or vacuum, opening or closing an electrical circuit when the designated point is reached.
Honeywell offers an impressive line:
-Compact size
-Durable construction
-Enhanced set point integrity
-Customisation and modifications available
|
|
100 Series
Pressure, Differential Pressure & Temperature Switches
Rugged, NEMA 4X, epoxy coated enclosure
SPDT or DPDT switch output
Easy access wiring
Single switch output
Internal reference scale and adjustable deadband available
Adjustable ranges: 30 "Hg Vac to 5000 psi; 1 bar Vac to 344 bar; 0.2 "wcd to 500 psid; 0,5 mbar d to 34,5 bar d ; -180 to 650 ºF; -117 to 340ºC
Approvals: UL, CSA, CE, TUV
|
|
Mechanical Pressure Switch
Relative and differential pressure switch Type 604
0.2 ... 50 mbar
The type 604 pressure switch is used as a ∆P flow switch in ventilation ducts for the control of filters and fans, and in primary and secondary control systems for the control of air dampers. The 604 pressure monitoring switches are also ideally suited to protect heating coils from overheating and for monitoring industrial air cooling circuits. Medium: air and non-corrosive gashttp://img.directindustry.com/images_di/photo-p/23640.jpg
http://img.directindustry.com/images_di/photo-p/23640.jpges.
Setting ranges:
- 0.2 – 3 mbar (20 – 300 Pa)
- 0.5 – 5 mbar (50 – 500 Pa)
- 1 – 10 mbar (100 – 1000 Pa)
- 5 – 20 mbar (500 – 2000 Pa)
- 10 – 50 mbar (1000 – 5000 Pa)
|
|
Digital display
100% adjustable set point and deadband
All solid state design
Remote and local "I AM Working®" status signal
Captures and displays MAX/MIN process extremes
Continuously stores HI/LO extremes
Adjustable ranges: 0 to 4500 psig (310, 3 bar) ; 0 to 200 psid (13, 8 bar) ; -300 to 1000ºF -184 to 538ºC
4-20 mA output models available
Division 1 (Intrinsically Safe) Division 2 models available
Approvals: UL, cUL, CE, ATEX, GOST
|
|
Relative and absolute pressure switch Type 615
Relative –1 ... 0 - 600 bar
Absolute 0 ... 0.3 - 16 bar
The type 615 pressure switches measure pressure by means of highly resistant ceramic elements. An open collector (transistor) output accommodates loads up to 100 mA. Either an N/C or N/O contact may be used, and the upper and lower switching point can be freely selected in the range 5 to100% fs. Various electrical and pressure connections are available to suit given applications.
|
|
-Precision stainless steel mechanism for arduous
atmospheres and high humidity.
- Set point adjustable over whole range against calibrated
scale with tamperproof adjuster.
- Precise and accurate operation guaranteed by use of
hydraulic formed bellows, or capsule stack.
- Ranges available up to 75 Bar (1,000 psi)
- NACE MR-01-75 compatibility.
- Models for fixed switching differential, adjustable
differential and HI-LO operation.
- Safety vented or blow out device as standard.
- Hermetically sealed microswitch option.
|
|
J6 Series
Product Overview
- Rugged, NEMA 4X, epoxy coated enclosure
- single switch output
- SPDT switch output
- Adjustable deadband versions available
- Adjustable ranges: 30 "Hg Vac to 6000 psi, 1 bar Vac to 414 bar
- Approvals: UL, CSA, CE
|
|
| ... products without technical information |
| |
Honeywell MICRO SWITCH™ Toggle Switch
Full-Scale Offering. Clean Slate Engineering. Optimal operator interface for controlling machine function to construction and agriculture equipment OEMs, in addition to aerospace, air transport, armored fighting vehicles. Our toggle switches withstand wet, dust, dirty environments and are designed for use in harsh environments. With many configurations available, our Honeywell can help you with quick customization.
-IP rating for commercial use
-Hermetic bonded sealing
-In-house machining and stamping capabilities
-Configurable components
|
|
|
|
|
|
ESPORT Full Size Rocker Switches
The ergonomically-designed ESPORT Series comes with a large independent LED-illuminated indicator window which clearly identifies the switch’s labeled function - your label or ours. The switch can be ordered with an LED illuminated actuator, as well. All ESPORT switches are molded in a clean matte finish and operate with a definite tactile feel. Actuation of the switch feels crisp. Also, ESPORT switches will accept loads up to 15A. Due to the LED's long life, lamp replacement should not be necessary.
Tested in America’s toughest truck applications, the ESPORT switch is reliable, durable and is available with a full range of rugged one-and two-pole circuits.
It has an optional polarized lock-on connector. Spade switch terminals are tin-plated for long storage life.
Ratings:
15A @ 125V ac.
10A @ 250V ac.
3/4 Hp @ 250V ac.
CUR marked.
Recommended up to
15A@28V dc.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break contact mechanism.
Butt action contact mechanism designed specifically for use on ac and low voltage dc applications.
Contact Material:
Movable - Silver plated copper with silver contact face button.
Stationary - Copper with silver contact face button.
|
|
|
|
|
|
Field-proven in America's roughest off-road applications, the standard size EURO/SR is one tough and reliable rocker switch. Available with the complete range of rugged one and two-pole, illuminated or non-illuminated circuits. The EURO/SR Series offers snap-in mounting and can be provided with a durable silicone seal which resists dust and moisture.
All EURO/SR switches are molded in an aesthetically pleasing matte finish and operate with a crisp tactile feel allowing for easy actuation. The EURO/SR will accept loads up to 15A.
Terminal numbers are stamped on base for easy identification.
Ratings:
15A @ 125V ac.
10A @ 250V ac.
3/4 Hp @ 250V ac.
(Hp rating does not apply to lighted switches.)
CUR marked.
Recommended up to 15A
@28V dc.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break contact mechanism.
Butt action contact mechanism designed specifically for use
on ac and low voltage dc applications.
Mechanical Life:
Maintained - 100,000 operations, minimum.
Momentary - 25,000 operations, minimum.
|
|
|
|
|
|
Eaton presents its New Generation Rocker (NGR) Series. This fieldproven line of full sized rocker switches, initially developed for the Heavy Truck Industry is now found in a variety of vehicle related applications. The NGR offers both European styling and ergonomic design while still providing the solid durability that you have come to expect from Eaton switches.
Illuminated and non-illuminated versions with either incandescent bulbs or LED's are available in either dependent or independent circuits and in a variety of popular switching circuits. The NGR also offers a variety of rocker buttons and indicators with laser-etched or pad printed icons, insertable lenses and adhesive-backed labels.
Ratings:
15A @ 125V ac, 10A@250V ac.
15A @ 28V dc (14V dc rating).
Approvable under stringent UL and CSA standards.
For information, contact your Eaton Sales Representative.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break contact mechanism.
Butt action contact mechanism designed specifically for use on ac and low voltage dc applications.
|
|
|
|
|
|
Full Size Euro-Look Rocker Switches
Eaton's 8004 and 8005 Euro-Look Series features matte finish European styling and snap-in mounting. These durable switches, field-tested in the most demanding truck and marine applications, are available with a variety of standard actuator options. Options include concave, two-face, illuminated, non-illuminated, and the recessed feature which allows placement of your label on the face of our rocker.
All switches in this rugged lineup can be fitted with a silicone rubber seal to provide moisture and dust resistance.
Additionally, these switches can be gang-mounted into a single panel opening. Panel blanks are also available.
SPECIFICATIONS
Ratings:
15A @ 125V ac.
10A @ 250V ac.
3/4 HP @ 250V ac.
(Hp rating does not apply to lighted switches).
CUR marked.
Recommended up to
15A@28V dc.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break contact mechanism.
Butt action contact mechanism designed specifically for use on and low voltage applications.
|
|
|
|
|
|
Industrial Purpose Toggle Switches - AC/DC Rated
The Industrial Toggle Switch Line employs a Quick-make/Quick-break wiping action contact mechanism. Large, well separated terminals reduce the possibility of electrical creepage and insure separation of loose wire strands from adjacent leads. These switches are designed for heavy duty applications, such as industrial power tools and floor cleaning/polishing equipment.
Circuits: 1PST, 2PST, 2PDT. Maintained contact action.
Contact Mechanism: Quick-make/Quick-break wiping action.
Contact Material:
Movable - Copper silver plated.
Stationary - Bronze silver plated.
Terminal Types:
Screw Terminals - 7320 & 7321 Series: Brass designed to accept #5-40 x 1/4² (Cat. No. 811-14) binding head screws.
Furnished unassembled.
7360 & 7361 Series: Brass designed to accept #6-32 x 1/4² (Cat. No. 811-161) binding head screws.
Furnished unassembled.
8690 Series: Brass designed to accept #6-32 x 1/4² (Cat No. 811-7248) binding head screws.
Furnished unassembled.
|
|
|
|