|
|
Plain
Thermal Transfer Labels
Durable Thermal Transfer Labels For All Thermal Transfer Printers
* Widest range of durable labels
* Choose from over 4,500 material/size combinations
* Small, convenient pack pricing
* Volume discounts available
* Ideal for pre-production evaluation
|
|
Quality
The self-adhesive markers are made from polyester film, laminated with a crystal clear polyester over-laminate. This over-laminate has a very high resistance to chemicals, ultraviolet rays and extreme weather conditions
Flexibility
All markers are available per card, even customized markers made within the standard colour and size parameters. You can save money on large orders by combining different legends within the same size.
Standardisation
By using Brady markers to identify the pipes within your company, you can rest assured that the results will be both uniform and in accordance with the Health and Safety Regulations
|
|
Terminals, Lugs, Connectors, Markers & Heatshrink
For over a century, Thomas & Betts has been a leader in providing a broad range of connectors suitable for the majority of all electrical applications. In fact, the high quality, easy-to-use, versatile connectors from T&B have continually helped define the standards used throughout the electrical industry. T&B's family of products includes many of the most-requested brands in the industry including Color-Keyed®, Sta-Kon®, Spec-Kon™ , Shrink-Kon®, Snap-N-Seal®, Elastimold®, Blackburn®, and Marr®. Whatever the application - commercial, industrial, OEM, utility, residential, communications - and whatever the voltage - low, medium or high -- we have the right connector for you. If we don't have it, we'll custom design and manufacture products specifically suited to your application!
|
|
PKS M1
- Stainless steel marking system with combinable single-character markers.
- The markers can be put together and threaded over the plate.
- The plates are easy to mount on the cable with stainless steel cable ties.
- The individual markers can also be fixed in place on the plate with pliers.
- Acid-resistant stainless steel for aggressive environments and high resistance to fire.
PKS M2
- Complete marking system for cables, hoses, pipes and components.
- Single-character and multiple-character markers which can be combined on site.
- Made of acid-resistant stainless steel for aggressive environments and resistance to fire damage.
- Easy to mount with steel cable ties.
- Marker information can be transferred via CAD, floppy disk, modem or tables, for customized production on one single marker plate.
|
|
sock for anchoring of the cables or pipes of reels, controls aus ground, the spiral cables
steel or nylon
agmente lifespan of the cables or pipes
|
|
Polyamid 12 ties
Description :
Good resistance on thermic and humidity variation
Resist to chemical agents and UV effects
Resistant to fire : UL94HB
Width: 9mm
Length: 132mm, 180mm, 265mm, 300mm, 360mm, 500mm, 750mm
Material : Polyamid 12
Colour: Black
Option:
Tightening tools
Packaging : bags of 100 pieces
Delivery time : available on stock
Customs Tariff : 39 23 90 90
|
|
Easy and quick remove
Material: Polyamid 6/6
Standard color :Natural
Packaging: bag of 100 pieces
Delivery time : available on stock
Option : Black color
|
|
|
|
|
|
Over 100 variants. Which one is right for you? From wrap-around labels to inscribed aluminium circular blanks.
Label sleeves KT (standard sleeve)
High-quality, fully transparent label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS 4... or DM 4... Six versions are available covering the entire core cross section range from 0.22 mm² to 120 mm². The sleeves come in different lengths. The special KT 2/20x9 or KT 2/35x9 sleeves are for multi-line single wire labelling. They hold the ACS labels type KSO or DM 9...
Label sleeves KTH (halogen-free)
High-quality, fully transparent, halogen-free label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS 4... or DM 4... Five versions are available covering the entire core cross section range from 0.22 mm² to 50 mm². The sleeves come in different lengths.
Label sleeves KTH/Q (halogen-free / high packing density)
High-quality, halogen-free two-part label sleeve for extreme demands. The geometry of the sleeve only causes a minimum increase in diameter of the cable. The trapezoidal design makes for rapid and simple installation. They hold the idents (BK) and the ACS labels type KS 4... or DM 4... Eleven versions are available covering the entire core cross section range from 0.14 mm² to 240 mm². The sleeves come in different lengths.
|
|
FLEXIMARK® Marking systems
The diverse marking systems for simple, lasting, clear marking.
Manual or electronic marking.
For cables, single cores or switch cabinet marking.
In plastic or stainless steel for a harsh environment.
FLEXIMARK® is a registered trademark of the
Lapp Group in many countries, and the genuine product is therefore only available from Lapp.
|
|
|
|
|
|
Copper braiding on tube former
Material: Tinned copper round braiding on PVC tube former
Properties: Highly flexible hollow wire braiding conduit, easy pulling in of cables due to the tube former
Application: CEM-screening an shielding braiding
Temperature range: -75°C / +150°C
Braided cable sleeving polyamide
Material: Polyamide PA 6.6, strand 0,25mm
Properties: Highly flexible, self-adapting, resistant to abrasion, free of cadmium, formaldehyde, halogen and graphite, self-extinguishing acc. to DIN 75200 (FMVSS 302), good resistance to fuel, mineral oil and many other chemicals
Approved: Smoke and toxic test acc. to NF F16-101 classing F2, behaviour in fire acc. to UNIFER E10.02.977 30 sec. flame impingement
Temperature range: -55°C / +125°C
Colour: Black
Braided cable sleeving polyester
Material: Polyester PET
Fire classification: V0 acc. to UL 94
Properties: Highly flexible, self-adapting, resistant to abrasion, free of cadmium, formaldehyde, chrome 6, nickel, lead, PVC, halogen and graphite, self-extinguishing acc. to DIN 75200 (FMVSS 302), good resistance to fuel, mineral oil and fatty matters
Approved: Smoke and toxic test acc. to NF F16-101 classing F1, behaviour in fire acc. to UNIFER E10.02.977 30 sec. flame impingement
Temperature range: -50°C / +150°C
Colour: Black matt
|
|
Please use the link to check our full range of Wire Handling Hardware.
We can also custom mould if you require a special size or configuration.
|
|
|
Tubing protection with closing system for mecanical, EMI/RFi or thermal protection Diameter between 9 and 100 mm
|
|
Optical Fiber Flexible Guide System
Features
●Fully modular system giving complete fiber
management and protection at PCB level applications
●For use with 250 and 900 micron fiber
●Fibercan enter and exit at any point, without risk of fibersnagging or kinking
●Angled and straight lugs located along the top of the guide preventing fiberfrom springing out
●‘Snake’the guide through and over components, where space is limited
●Flat and raised supports available, other support post heights and panel thicknesses available by special order
|
|
Richco's Slit Harness Wrap (SHR) is the answer to cable management problems in industrial applications, where the jumble of cables can be unsightly and dangerous.
The SHR is a revolutionary system that enables cabling to be tidied and managed in seconds via the use of a special applicator tool. The SHR can be removed at any time and is totally reusable.
|
|
- Automated application equipment speeds assembly to cable and lowers costs while greatly reducing the risk of Carpal Tunnel Syndrome.
- Heyco's Automated Pre-Assembly Equipment.
- Installs easily with fingertip pressure into a standard Double "D" hole. No clumsy hand tools required!
- Assembly friendly! Independent of insertion into the panel, RDD Lockit Strain Reliefs self-lock onto the cable. Thus, they may be preassembled offline for final assembly at a later time or remote location, for lower installed cost!
- Multiple panel locking steps secure lockit strain relief into range of panel thicknesses.
|
|
Lay-In Strain Relief Bushing
For Split Panel Mounting Holes US Patent No. 5,243,139
Assembly friendly! Independent of insertion into the panel, Lay-In Strain Reliefs self-lock onto the cable. Thus, they may be preassembled offline for final assembly at a later time or remote location, for lower installed cost!
Designed to be installed in split panel mounting hole or dropped into a slot (see schematic).
Unique wire locking ratchet allows for generous wire range from .250" (6,4mm) to .600" (15,2mm).
Protects against forces of pull, push, or twist.
Can be used for one cable or bundles of cables (round or flat wire).
|
|
|
ZIPPER TECHNIK : a full range of tubing protection to resist at abrasion, EMI perturbation or thermal ambiance. ZIPPER product are made with a track system...
|
|
3M™ Dual Lock™ Reclosable Fastener
Strips of flexible plastic covered with mushroom-shaped interlocking heads that fasten securely when pressed together. Available with 3M™ VHB™ Tape backing for permanent attachment of the strip to the substrate. Plain-backed version can be sewn, stapled or ultrasonically welded to the substrate.
|
|
|
HellermannTyton's offers a wide variety of lightweight, corrosion resistant clamps and clips manufactured from high performance, thermoplastic materials selected to work well in a variety of diverse environments.
|
|
Tap-In
Masonry Wire Tap In, routes wires along concrete, brick, mortar, cinder blocks and other hard surfaces—without drilling.
|
|
|
HellermannTyton’s snapper hose clamps are lightweight, corrosion resistant hose clamps manufactured from high performance, thermoplastic materials selected to work well in a variety of diverse environments. A quick, ratchet closure provides for reduced assembly line time and allows for application after connection of the hose. Hose clamps may be applied using one of HellermannTyton's hose clamp tools.
|
|
HeycoJ Wire and Cable Holders
Vertical Orientation-Top Entry (A) Horizontal Orientation-Side Entry (B)
Galhers and directs single or groups of cables al low cost.
Two orientations: Vertical for top entry and narrow width; Horizontal for side entry and low height where clearance is a problem.
Two gate types: Regular gate secures cables with tension alone; Latch gate locks cables in place.
Both types install with fingertip pressure Into a 3/16" (4.8mm) diameter mounting hole.
Bayonet mount self-adjusts to various chassis thickness up to .090" (2.3mm).
6/6 nylon with a 94V-2 flammability rating.
Temperature rating 85°C.
W Recognized under the Component Program of Underwriters' Laboratories File #E-54523
|
|
|
Wiring Accessories are an integral part of PANDUIT's comprehensive selection of wire management products. We are committed to continually provide innovative, high quality products engineered to speed installation and lower your installed costs. To help assure optimum quality, PANDUIT products are designed and manufactured to meet applicable quality standards including International, UL, Military, ISO, and Aerospace.
|
|
Arrowhead Mount Cable Tie - WIT-50RLA
- Snaps into a pre-drilled hole for quick mounting.
- Bundling of cables can be done either before or after mounting.
- The arrowhead mount rotates in the hole to self-align the wire bundle.
- The one-piece mount and harness saves time and money.
- The WIT-50RLA is available in four different length areas for a variety of bundle diameters.
- It offers 50 lb tensile strength and is RoHS Compliant.
|
|
Cable Management
Richco provides a comprehensive range of wire, cable and hose management products in both plastic and metal materials. Products are available with both fixed and adjustable holding diameters. Richco offers plastic clips, clamps, wire saddles and curly lock designs in addition to innovative products such as Cableater (SHR). These parts have a wide variety of mounting methods including self-adhesive tape, screws, rivets, blind hole, and push through arrowhead designs.
|
|
|
High-density slotted wall Pro-Duct comes with narrow fingers, equaling a 2 to 1 finger ratio compared to standard slotted wiring duct.
|
|
- No minimum order quantities
- Same day shipment on in-stock products
|
|
Strain relief options in various variations and models. To screw on, snap in or press on. In plastic or metal. Cable ties are used to provide simple strain relief to cables of all kinds.
Strain relief, type ZL
The strain relief plate ZL may be used wherever cables, cords, wires or conduits must be relieved or routed in a way that is secure, easy and cost-effective. The insertion of the ELB bush stops the cold extrusion characteristic of plastic from affecting the secure fixing of the plate. The DH spacer sleeve is needed for two-tier mounting.
Strain relief, type ZL-AH
The strain relief plate ZL-AH is based on the strain relief plate ZL. Inserting the aluminium bush enables a standard M5 screw to be used for fastening.
|
|
We propose you a new range of Cable Clips, Clamps & Cable Ties.
Recommandations apply for most electronic, electrical and electromechanical uses.
Our product are made to be easily installed
|
|
ITW TekFast Routing Clips secure hoses and tubes for the automotive industry. Various design features provide options to satisfy your application needs.
Key benefits and design options:
- Tube retention - Fold-over latches, rabbit ears, and snails are a few of the many retention features available.
- Panel fastening - Pinloks, W-prongs, Christmas Trees, and Vari-Studs are some of the fastening methods available.
- Special Design Options - If you have a special need, we will work with you. For instance, Santoprene inserts can be added for vibration dampening, conductive resin can be used to dissipate static electricity, and spin weld pads can be added to secure the clip.
|
|
|
|
