|
|
Metal cable carrier
Gortrac standard carriers are manufactured from high strength steel with zinc dichromate plating for 70% better corrosion resistance than standard zinc. Gortrac carriers are also available in various grades of stainless steel. The primary advantages of Gortrac steel carriers are:
- Unsupported Span: Metal carriers offer a longer unsupported span than similar sized plastic carriers. Costlier metal carriers often provide better value than plastic carriers by eliminating the need for support systems.
- Strength: Metal carriers are significantly stronger than similar sized plastic carriers. Gortrac offers several lightweight steel carriers that are extremely cost effective, while providing 8 x more strength than traditional, heavy duty modular plastic carriers.
- Temperature resistance: Stainless Steel carriers are ideal for applications with ambient temperatures exceeding the 392 F short term limit of glass reinforced nylon carriers.
Plastic Carriers
Although there are many factors that can be considered, the primary advantages of plastic carriers are:
- Cost: As a general rule, plastic cable/hose carriers are less expensive than similar sized metal carriers
- Weight: Plastic carriers are lighter than similar sized steel carriers
- High Velocity/Acceleration: Plastic carriers are lighter and quieter, providing smooth, reliable operation in applications with the most extreme velocity and acceleration requirements.
- Long Travels: Although metal carriers invariably offer longer unsupported spans than plastic carriers, in long travel applications where support is required, plastic carriers can offer innovative features and accessories such as guide troughs modular sliders, and MarathonT Roller Sets, that provide cost effective advantages.
- Environment: Nylatrac/Nylatube carriers are available in a wide variety of polymers for use in demanding environmental requirements, such as explosion proof, clean room, increased UL, chemical resistance, etc. |
|
- Solid plastic
- Single unit chain links with the option of either fixed or openable brackets
- Simple and quick assembly
- End connectors with integrated strain relief
- Almost all types available immediately ex stock all around the world
- TÜV design approved in accordance with 2PfG 1036/10.97
Inside or outside: Hinged, openable and detachable brackets
Types 0130, 0180, 0450*, 0625*
Inside/Outside: Not to be opened
Types 0132, 0182, 0202, 0320*, 0450*, 0625*
* Opening possibilities depend on the respective type. |
|
| As part of our continuous development programme, since 1989 Brevetti Stendalto have developed innovative cable chain for circular applications like welding or painting robots, manipulators etc. (allow rotation of over 360°). Available in 9 different models, each link has opening cross pieces to allows easy installation of cable/hoses. |
|
- For three-dimensional movements
- Open design:
* Fast cable laying by simple pressing in of the cables – no threading through is necessary
* Simple inspection of all the cables
- Can be deployed on robots for swiveling and rotational movements
- The same system for robot feet and arms
- Optimum system for long service life of the cables:
* The minimum bend radius can be maintained
* The cables are cleanly isolated in three separate chambers
- Special plastic for long service life |
|
| Completely enclosed design to avoid any contact between cables and metal or wood chips, dust etc. Each link has a quickly removable cover for easy installation of the cables/hoses complete with their fittings. |
|
Gortube enclosed-style carrier systems are the benchmark for fully enclosed dynamic cable and hose protection. With the exception of optional cavity separators, they feature all-metal construction.
Gortube helically-wound extrusions have been extensively used in machine tool applications for over 30 years. They provide smooth movement, are aesthetically pleasing, offer the best protection available from hot chips and fluids, and can be delivered in a wide range of sizes.
Gortrac link-style carriers utilize standard Gortrac link designs and removable armor plate style lids to offer rugged construction, accessibility, easy repair and length modification. |
|
Fully harnessed cable carrier systems – Designed to fit your individual application.
You know what product you need – We supply it to you fully harnessed.
One supplier and contact person for the complete system. We develop, design and supply all components required for your individual cable & hose carrier system.
We also manufacture cables according to SIEMENS and INDRAMAT specifications
KABELSCHLEPP LIFE-LINE cables are harnessed according to SIEMENS-/ INDRAMAT specifications, suitable for SIEMENS or INDRAMAT drive controls consisting of signal and power cables and/or extension cables.
* any cable length available
* minimum delivery: 1 unit. |
|
Nylatube Hose and Cable Carriers provide protection for and maintain proper bend radius of cables and hoses in motion. Snap together links provide easy adjustment of length. Nylatube's heavy-duty fiber reinforced nylon construction is ideal for temperatures ranging from 0 to 250° F and travel speeds in excess of 200 feet per minute.
Gortrac has many all-nylon, snap together models in stock as well as a family of Nylon/ Metal Hybrid carriers made to order for more demanding applications. In addition to being corrosion resistant, many of our carriers satisfy clean room Federal standard 209E.
Nylatube was designed for use on, but not limited to: Machine Tools, Industrial Robots, Light Automation and Packaging Equipment, Small Electronic Manufacturing Equipment, and other production equipment.
|
|
Gortube enclosed-style carrier systems are the benchmark for fully enclosed dynamic cable and hose protection. With the exception of optional cavity separators, they feature all-metal construction.
Gortube helically-wound extrusions have been extensively used in machine tool applications for over 30 years. They provide smooth movement, are aesthetically pleasing, offer the best protection available from hot chips and fluids, and can be delivered in a wide range of sizes.
Gortrac link-style carriers utilize standard Gortrac link designs and removable armor plate style lids to offer rugged construction, accessibility, easy repair and length modification.
|
|
A strong design with triple connecting pivot pin, allow unsupported lenght up to 6,5 m and maximise service life of chain and cables.
Available with a wide range of frame stays. |
|
Small/medium sizes cable chains with yellow connecting pivot pin which offer high capacity in high performace applications
Available with snap open cover or closed styles. |
|
A wide range of cable chains, arranged in 6 series, in order to cope with all the cables and pipes dynamic protection requirements.
Light, Medium, Heavy Series for standard linear applications, Protection Series where a complete closure is required, Sliding Series for strokes up to 400 m, Robot Series for rotation applications. |
|
Nylatube Hose and Cable Carriers provide protection for and maintain proper bend radius of cables and hoses in motion. Snap together links provide easy adjustment of length. Nylatube's heavy-duty fiber reinforced nylon construction is ideal for temperatures ranging from 0 to 250° F and travel speeds in excess of 200 feet per minute.
Gortrac has many all-nylon, snap together models in stock as well as a family of Nylon/ Metal Hybrid carriers made to order for more demanding applications. In addition to being corrosion resistant, many of our carriers satisfy clean room Federal standard 209E.
Nylatube was designed for use on, but not limited to: Machine Tools, Industrial Robots, Light Automation and Packaging Equipment, Small Electronic Manufacturing Equipment, and other production equipment.
|
|
Based upon the PROTUM cable carrier system, this variant has been adapted for use in office areas.
The inner width and the possibility of double occupancy provide sufficient space for cables in office areas, i.e. for telecommunications. energy and data cables.
Double occupancy: Where more of space is needed, the take-up capacity can be doubled by laying the cables on both sides. In this case every second side-part is simply attached the other way round.
The link-free construction also serves as a design feature, with silver-gray, elegant-looking side walls.
Less expense – lower costs thanks to simple cable laying
Even pre-assembled cables can simply be inserted. The cables can easily be changed during service and maintenance work. For you this means lower costs. |
|
This series of chains are specially made to be used where the travel distance is long.The links are equipped with skids ,which allow the chain to slide on itself, made of special polymers to reduce friction and wear.
Special guide channels are available to support and to guide the chain. |
|
New Brevetti Stendalto cable chains series with small/medium sections for applications where high performance or high filling weight are not required.
Also suitable for long applications in combination with guid. |
|
For all applications, in which you cannot use nylon chains, Brevetti Stendalto proposes the Steel Series chains.
Available with aluminium draw plates or aluminium split cross pieces created by design; these chains can be used in special applications as offshore platforms, steel plants, etc. |
|
| Gortrac Open-Style carriers are constructed from steel for high strength and/or maximum unsupported spans. They are available in a wide range of sizes and styles for a broad range of applications, such as mobile construction equipment, mill and foundry duty heavy machinery, paper converting equipment, and refining equipment. Gortrac Open-Style Carriers are available with cavity heights ranging from 0.75” to over 24.” Continuous design improvements have led to the development of lightweight, high strength steel carriers with significantly more strength, load capacity and longer unsupported spans than plastic systems. |
|
Steel cable carriers
- For applications with high stresses
- Galvanized steel or high-grade stainless steel
- Maximum unsupported lengths
Steel cable carriers
Series S/SX
* Ideal for large, unsupported lengths and low to medium travel speeds
* Different stay systems for optimum matching to the application
Right-angled side bars
Type S/SX 0650 to 1800 with
hi from 31 mm to 109 mm
Straight side bars
From Type S 2500 onwards |
|
Cable Carrier
Precision Pneumatics takes all the hassle out of mounting and sizing cable carrier. Cable carrier comes pre-mounted on special brackets allowing neat and safe transfer of electronics and pneumatics to and from your attached tooling. Convenient slots on the outside surface allow pneumatic hoses and sensor wires to be added easily without any disassembly
Available On:
Dual Slides: 1" & 1-1/2" Bore
Single Action Slides: 1" & 1-1/2" Bore
Gantry Dual Slides: 1" & 1-1/2" Bore |
|
The range of ABLE CHAINS covers all the needs where the client needs the protection cables and hoses of movable elements. Different models in plastic, steel exist and stainless steel, according to the application to develop, considering the route and speed of the movable element, and radios of curvature of cables or hoses to transport.
KOLIBRI: Economic chain for slight applications in the cable transport. Connector integrated in each link. Without supports until 3m.
PFR: Chain provided for short displacements, completely closed, without supports until 2m.
PLE: Chain provided with crosspieces aluminum and link of plastic. it must be used for short routes. Without supports until 6m.
PKK: This chain can be abierta or be closed in all the versions without using no tool. It is used in great routes and speeds. Without supports until 4m.
SLE: Chain provided in steel, stainless and temperate. It can be provided with crosspiece circular, of foam and vertical and orizontales separators of plastic. For great number of cables and hydraulic or tyre hoses.
|
|
| ... products without technical information |
| |
|
|