|
|
Heyco® Liquid Tight Cordgrips
Multi-Hole, NPT Hubs
Features
All accompanying Cordgrips are made of nylon construction with TPE sealing glands that resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL.
Locknuts not included. Nylon Locknut Specifications.
For body part dimensions.
Multi-hole glands are only to be used with Heyco Liquid Tight Cordgrips and are not sold separately.
Consult Heyco for cordgrips molded in other colors.
|
|
Metric cable glands, PG, with reducing insert, with cable guide...
Multigum,
Soft plugs,
Metric locknuts,
Metric hex washer faced locknuts,
Slotted plugs,
O-Rings...
|
|
- Used to protect or cover through holes. Help eliminate sharp edges so your wires are protected and add aesthetic value to your application.
- 160 sizes available that will accommodate mounting holes ranging from .250%u02DD (6,4 mm) to holes as large as 2.50%u02DD (63,5 mm) diameter and panel thicknesses from .063%u02DD (1,6 mm) to .375%u02DD (9,5 mm).
- Rubber grommets are constructed of SBR with an operating temperature range of -40°F (-40°C) to 221°F (105°C).
- SBR grommets have good water resistant characteristics and are suitable for most moderate chemicals and wet or dry organic acids.
|
|
- Available in multiple sizes for cable diameters ranging from .065˝ (1,7 mm) to 1.560˝ (39,6 mm).
- We recommend using the fitting with the smallest maximum diameter that will fit your application.
- Smooth, rounded interior edges for ease of installation.
- Ratchet design of sealing nut assembly provides superior antivibration and ensures a firm grip on the cable.
- Easy to install–no tools required.
- Unique fingers securely lock into a range of panel sizes without use of locknut.
- Rotation prevented when used in “Double D” mounting holes.
- Limited intrusion into enclosure where access is tight.
- Consult Heyco for cordgrips molded in other colors
|
|
|
|
|
|
Conventional methods of chamber entry for validation thermocouples allow only limited numbers of thermocouples to be used. They are relatively time consuming in their application and frequently prone to unacceptable leakage.
The TCEG/1 addresses both these problem areas by providing individual slots for 18 separate thermocouples and a rapid action, locking and securing mechanism.
By utilising a three part sealant arrangement the gland becomes a TCEG/2 with the opportunity of increasing the capacity to 36 individual thermocouples. Should even more thermocouples need to be accommodated, then a ‘Y’ adapter connected to the chamber entry port can double both these quantities.
For mounting onto the autoclave chamber the TCEG is supplied with a Tri-clamp flange with the option of having a 1½” or up to 2½” flange.
The gland body is machined from 316L stainless steel with the cap in CZ121 brass. Sealants are in medical grade silicone to Shore 40 hardness and in accordance with FDA USP Class VI.
|
|
Heyco® Liquid Tight Cordgrips
Multi-Hole, PG Hubs
Features
All accompanying Cordgrips are made of nylon construction with TPE sealing glands that resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL.
Locknuts INCLUDED.
For body part dimensions.
Multi-hole glands are only to be used with Heyco Liquid Tight Cordgrips and are not sold separately.
Consult Heyco for cordgrips molded in other colors.
|
|
a whole of frameworks - to weld, seal or screw - make it possible to equip the crossing with the wall;
these frameworks receive modules adapted to the diameter of the conduits and drains;
accessories make it possible to ensure the cohesion and the sealing of the modules installed inside the framework.
|
|
sealing & insulation of the electrical cables by compression of a thermoplastic stuffing. Effective tightening, 2 plates of pressure.
Executions: nickelled brass or polyamide.
|
|
|
A Transit System is a means to maintain the integrity of a firewall,bulkhead or deck through which cables pipes and other services pass.The transit system will seal against and exhibit resisitance to fire,EMC,water,radiation,gas,chemicals,explosion,ultra violet light,smoke,vermin.Wherever a wall or bulkhead is penetrated by a cable or pipe the occupants and integrity of the structure are exposed to risk from hazards such as fire and smoke, water ingress, toxic gases and attack by vermin.
|
|
. Press packing evolutionary multicâbles and multipropriétés
. Sealing, fire resistance, to the explosions, the chemicals, the vibrations, the shocks, the rodents, cold, radioactive containment and soundproofing
. Multiple applications
|
|
. Low pressure: from 1 to 7 bars
. Electromagnetic hardening
. Watertightness, with gases and the air
. Fire resistance, to the explosions, the chemicals
. Radioactive containment
. Resistance to the vibrations, the rodents, the cold heat/
. Classification marinades has and H
|
|
MCT was developed for s’ to adapt to any d’ type; environment and to answer the great safety requirements:
firebreak
sealing
acoustic protection
vibrations
behavior with the explosions
resistance to the rodents
version CEM intended for protection against the electromagnetic disturbances.
|
|
Range X-series
System reduced of passage of cables and pipings
for partitions and boxes IP 65-67
|
|
. Reduced system
. IP 65 67
. Personalization with your needs
. Applications: boxes/cases, tables, cupboards, cabins/shelters
. Resistance to the vibrations, the shocks, the rodents, the cold heat/, fire, the products
|
|
Conax Technologies designs and manufactures a complete line of Transformer and motor power, conduit box feedthroughs, pressure and vacuum chamber power and instrument feedthroughs, etc.
*Stainless Steel Fitting
*For Gas or Liquid
*Easy Installation -No "Potting"
*Seals 1 to 240 Wires
*Pressure: Vacuum to 10,000 PSI (690 bar)
*Rated: 600 Volts to 55 Amps
*Field Adjustable
*Reusable Fitting
*Wire Identification Markers Applied
*Wires Readily Assembled or Replaced in Field
*Available With or Without Conductors
*Available With Thermocouple Material Conductors - Selected Sizes
|
|
HAST Feedthrough for Nickel Plated Copper Wires with Kapton® Insulation for Bias Measurement
Conax specializes in high quality wire sealing in demanding applications such as Highly Accelerated Stress Testing (HAST) typically done in the semiconductor industry. Cyclical temperature testing is hard on seals, wire insulation and on the wire itself from a corrosion standpoint.
This style feedthrough features nickel plated copper wire to minimize corrosion of the wires. It also uses Kapton insulation on the wires which stands up to steam and flexing much better than traditional Teflon insulated wires. The gland is rebuildable. After aging, the wires and sealant can be replaced, allowing the metal components of the body to be reused.
Each feedthrough is pressure tested upon initial manufacture, or upon being rebuilt, to insure a leak proof seal. They can be supplied with straight threads (bulk head fitting style) or with NPT threads or flanged connection.
|
|
| ... products without technical information |
| |
|
|
