|
|
Cable trays
Wide span cable trays
Fittings
Straight connectors
Angle connectors
Adjustable connectors
Joint plates
Covers
Cable holders
Distribution boxes
|
|
- Wire rope systems -
For light energy supply systems with 1 to 3 cables. For applications which do not allow the installation of C-rails. Suitable for indoor and outdoor use.
- C-rail systems -
As energy supply system from light to heavy design. C-rail systems are used for very different applications: crane manufacturing, hoist units, transport systems, conservation technology, special engineering, etc.. C-rails are available in zinc-coated and stainless steel version. Special versions are available for explosion-proof areas. Suitable for indoor and outdoor use.
- Square rail systems -
Energy supply systems on square rail (diamond track) are predominately used on circular and curved tracks or in very dusty environments. These systems guarantee a perfect function even on variable levels. Our square rails are galvanized or made of stainless steel (only program 270). Special versions are available for explosion-proof areas. Suitable for indoor and outdoor use.
- I-beam systems -
Festoon-systems for I-beams carry flat and round cables for the transfer of electrical energy and data. Hoses are also carried for the directing of fluids, air or gases. Wampfler festoon systems are employed worldwide in steel mills, ports, zinc coating shops and compost preparation facilities, to name a few applications.
|
|
Pultrusion technology. The assembly principle enables a variety of fittings to be made.
UL is particularly strong and suitable for heavy loads.
- 9 widths, 4 heights
- distance of up to 6 m between supports
- complete system of fittings
- perforated
- bars for fixing cables
- can be provided in kit form
|
|
Hot press moulding process enabling a complete range of functions and also a variety of fittings to be produced.
K² is suitable for routing cables over stretches with a complex configuration.
- 9 widths, 3 heights: 19 sizes in stock
- Unrivalled speed of installation by interlocking
- Complete system of fittings
|
|
Mesh cable tray systems
Magic mesh cable trays
Mesh cable trays
C mesh cable trays
Fittings
Straight connectors
Angle connectors
Adjustable connectors
Joint platesCovers
Mesh angles
Cable holders
|
|
CADDY CATHBA and AFAB angle brackets are an easy way to attach one or more CADDY CABLECAT J-Hooks to the ceiling or to threaded rod.
Features:
New angle brackets lock on CABLECAT J-Hooks so the assembly will not twist or swivel.
AFAB3 offers greater field assembly options - back-to-back, 90° corners, etc.
Pregalvanized steel
AFAB angle bracket with long leg for tool clearance.
CATHBA angle bracket provides base for up to 6 J-Hooks.
Preassembly options available for rod, wire, strap and cable applications.
|
|
Slotted Wall Duct
Standard slotted wall Pro-Duct features break-away fingers which provide additional access for wire leads. Each section of the duct is provided with two score lines. The upper score line is used to break away fingers when a greater opening is required. The lower score line allows the sidewall to be smoothly cut for joints and "T's". Certain sizes of slotted wall wiring duct are available in intrinsic blue color. This indicates that the control panel is intrinsically safe - often required in applications where explosive gases exist. Contact HellermannTyton for details and specific sizes of intrinsic blue, slotted wall wiring duct.
|
|
This is by far the largest product range, with a high number of articles.
Including: Cable trays/-ladders, wide span cable trays/-ladders, vertical ladders and mesh cable trays - everything in different load/span classes , siderail heights and width as well as material and corrosion protection.
Of course there are also fittings, covers, barrier strips and connectors corresponding to the siderail height and width as well as cantilever brackets and hanging pendants with load-capacities of 100 N to 10,000 N.
Talking about a system, the material and surface integrity are dovetailed with each other too.
|
|
|
VAHLE cable carriers support power cables and hoses (for pneumatic and hydraulic applications) to mobile equipment. The carriers travel on flat flange or sloped flange I-beams. They comply with VDE and international regulations and support both flat and round cables.
|
|
When your installation calls for laying a large number of cables, we recommend the use of cable ladder.
This solution offers the advantage of improving ventilation, thus avoiding overheating and damage to the confined cables, enabling higher electrical currents to pass through the runs.
We have designed two types of cable ladders, adapted to two types of installations.
The EAC-CES cable ladders satisfy most everyday needs. They have the advantage of being collapsable and so easier to store. The ELP-CES extended length ladder is ideal for arrangements with a heavy load or over an extended distance.
With their quick locking splice bars, assembly and installation of these two models are very easy. Both types of cable ladder have the same accessory systems: splice bars, bends, T and cruciform junctions, reducers, covers, etc.
|
|
We can offer you different cable tray profiles, including the P.S profile, and the P.S.n. profile (new product).
The P.S. profile is a safety product, with its shape designed to reduce the risks of injury during installation.
Moreover, the P.S. edges improve the rigidity of the structure. This asset enables lighter tray to be used, allowing for greater distances between supports. In turn, this leads to a reduction in the number of parts required and hence, to a reduction in assembly cost.
Several other types of cable tray profile are available: Straight, Omega, C profile edge, etc.
All our tray models are compatible with an extensive range of accessories: cranked, interlocking splice bars, both flat and for crimping; tray base joints; 90° and 135° angled bends; convex, concave, cruciform, T joints etc.
|
|
Normal environment (bearings steel codes 220 or 223 bearings pressed sheet metal), wet or dusty (rollers full nylon assembled on axes stainless to add code 226).
Carts for flat cables, round pipes or mixed.
Autocentreuse sheath = reduced wear of the carts (an exclusiveness normaf).
|
|
Adjustable carts with 4 rollers. Beach of adjustment of 50 with 135mm.
Wing higher than 135mm to consult us.
Reduced set-up time, carts run directly on iron.
Body galvanized steel. With epoxy protector or out of stainless to consult us.
Carts for flat cables, rounds, pipes or mixed.
Capacity of the carts: 30 kgs (rollers nylon, axes stainless) & 60 kgs (rollers & axes galvanized steel).
Version with chain of traction to consult us.
|
|
We can offer you different cable tray profiles, including the P.S profile, and the P.S.n. profile (new product).
The P.S. profile is a safety product, with its shape designed to reduce the risks of injury during installation.
Moreover, the P.S. edges improve the rigidity of the structure. This asset enables lighter tray to be used, allowing for greater distances between supports. In turn, this leads to a reduction in the number of parts required and hence, to a reduction in assembly cost.
Several other types of cable tray profile are available: Straight, Omega, C profile edge, etc.
All our tray models are compatible with an extensive range of accessories: cranked, interlocking splice bars, both flat and for crimping; tray base joints; 90° and 135° angled bends; convex, concave, cruciform, T joints etc.
|
|
Economic system & reliable.
Reduced exposure time.
Require only one fixing at each end.
Use: normal, corrosive or very dusty environment.
Carts for flat cables, rounds, pipes or mixed.
To envisage a safety coefficient of 4 (breaking load ÷ 4).
Capacity of the carts: 5 kgs.
|
|
The CARS, ABLE System NORMAF, conceived for the provision of energy to movable elements, offer optimum solutions for a great variety of applications, such as facilities of crane and elevators, storage in height, machines of construction, facilities of transport, etc.
Our range of provision includes:
Cars on steel cable with diameters of 6, 8 or 12mm, with a lifting capacity of 5kg. by car and until a length of 130m without intermediate supports. Cars for round cables until 40mm. of diameter and planes until 75mm. of width.
Cars for profiles until IPE 270 or IPN 360, with a lifting capacity of 15 to 60kg. Length of the system until 30m. and limitless in reinforced version.
Cars for profile C, with a lifting capacity from 100 to 400kg, speed of use to 140m/min., Length of the limitless system with possibility of the circuit formed by curves. Cars for round cables until 40mm. of diameter and planes until 400mm. of width. Option of stainless steel material.
The ABLE CARS, system FESTOON, conceived for the provision of energy to movable elements that demands the heavy industry, offering by means of its robust construction, great security on watch still in very hard works.
|
|
The PFLITSCH PIK-Trunking allows all the benefits of industrial trunking to be applied for small cable volumes as well. It can be opened along its entire length, is closed at bends and outlets and is easily installed using a clip process. A number of specially-shaped elements permit effective 3D configuration.
The PIK-Trunking is available in steel sheet, zinc-plated or primed as well as in stainless steel. It can be combined easily with the industrial trunking to product perfect protection for your electronics and sensors.
The advantages:
- Sturdy design
- Closed also in 90° angle
- Can be opened along entire length
- Shaped parts for angles and outlets
- Practical fastening system
- Tools and shearing machines
- 4-trunking cross sections
- Clip technology
- Edge protection, end cap
- installation in narrow areas
|
|
The extensive OBO LFS cable routing systems with cable routing ducts, trunking and wiring ducts, skirting duct systems of sheet steel and plastic. The product range is completed by a practical range of fixing elements.
OBO has also developed a new generation of skirting duct called "Quickline" made of sheet steel and aluminium, which is characterised by rapid user-friendly installation.
As an innovation OBO now provides the ideal complement to the skirting duct system in the form of a coil aid in the waveguide socket. A new development which reflects the increasing importance of waveguide technology and makes existing ducts suitable for waveguides. Another innovation in the field of skirting ducts is a double device socket for different installations.
|
|
Pre-mounted cable trunks with cable glands
We plan, manufacture and implement modern solutions to the cable protection in industrial channels and PIK trunks.
You define the necessary cable- / Hose glands - we supply
everything ready to be installed!
|
|
The Industrial Trunking
Economical and reliable for machine and plant engineering
The PFLITSCH Industrial Trunking is the perfect all-round mechanical protection for cables and wires laid from machinery and equipment to switch cabinet and other peripheral units. With over 100 specially shaped elements such as angles, outlets, crossings, reversers etc. each cable routing can be realised. The enclosed system constitutes excellent industrial design.
The trunking components are supplied in various materials, of coated steel sheet or stainless steel, on request painted to customer requirement.
Tools and machines make trunking processing easier.
|
|
Already at the end of the seventies NIEDAX decided to take the COLOR-trunkings, made of steel, into the range.
Two lines with three different measurements each came onto the market in 1980 then.
Steady expansions and the fact that ideas and suggestions from installers and planners were taken into account, have allowed this product group to expand to such vast range. Today the standard program covers, 25 different measurements made of steel, 5 profiles made of aluminium and corresponding fittings, balustrade-covering and other accessories.
Based on the long experience of our construction division countless special variations were furthermore carried out in the course of time.
|
|
Solid Wall Duct
Solid wall Pro-Duct wiring duct is designed for straight wire runs where breakouts are not required.
|
|
DUCT FOR WIRING
The ducts for wiring of tables and electric cabinets, available in 20 dimensions, with step reduced or not normal, are provided with a higher profile of perfectly round plates which facilitate the operations of wiring. They can be installed with the wall or the ceiling. The wiring ducts have the following characteristics: 20 dimensions with step reduces 6/4/4 mm or not normal 12/8/8 mm, functional profile to optimize the relationship between dimension of the duct and the capacity of filling, tension of maximum use 1000V, conformity to the standards CEI23-22, lid with suitable mechanical behavior (dismountable without tool), color gray RAL 7030, clamp holes. The wiring duct is manufactured out of matter thermoplastic rigid, insulating, shock-proof and self-extinguishing. It can be used between -15° and +60°C. The standard length is 2m. It resists ageing rather well.
|
|
Canaline to smooth walls in autoestinguente PVC series CA
Systems of canaline for wirings at sight
Execution in autoestinguente PVC color white man and gray RAL 7035.
Resistant to acids, oils and fat people, they are indeformabili for temperatures comprised between -20°C/80°c. Perfect system of coupling between cover and canalina thanks to the detail design of the profile. Line of invitation to the breach predisposed to the base of the wall for being able to cut the edge when two canaline in derivation are placed. They come supplied complete of cover in the length standard of 2 linear meters manifactured in sturdy scato them of cardboard.
|
|
SERIES WADO: MOULDING AND PLINTH
the vast range of drains which we propose makes it possible to solve of many problems which arise at the time of ka realization of projecting distribution systems either for use domesticates or tertiary or industrial.
Manufactured in the respect of the security standards in force, these systems guarantee an implementation fast, easy and with lower costs.
With regard to the mouldings, they are particularly adapted to the small installations or are intended for the enlargings and modifications of already existing installations. The plinths as for them are particularly adapted to the reorganizations in domestic medium, the restoration of offices, for installations in prefabricated buildings. They offer the advantage of being harmonized perfectly with all the decorations.
The mini-mouldings are characterized by the following elements: 7 dimensions height, separation of the circuits to 3 compartments (fixed separators), a range supplements accessories of interconnection, various colors: white RAL 9003 and gray RAL 7035, maximum tension of exercise 1000V, index of protector IP40. They are provided out of bars of 2m.
The plinths have the following characteristics: 2 dimensions (80 and 120 mm), separation of the circuits in 3 compartments with fixed separators for the version 80mm (5 compartments for the version 120mm), range supplements accessories of interconnection, dismountable lid with tool, various colors: white, anthracite or chestnut, index of protector IP40. It is possible to integrate the plinths into the mouldings of series WDO. They are also provided out of bars of 2m.
|
|
The use of industrial metal trunking is required for difficult ambient conditions. The duct protects the cables from the atmosphere and impacts and also provides an electromagnetic shield.
Splice bars, captive clips, 90° and 135° angled bends, concave and convex, T's, cruciform junctions, separation and coupling corners, end blanking parts, etc., are available to complete the metal trunking system.
In addition to these various elements, patented systems such as rapid installation equipment supports and cable fasteners are available.
|
|
- COLOUR : Black with a haelicoidal yellow strip
- MATERIAL : Self-extinguishing polyvinylchloride
- LENGHT : 3 - 4 - 6 mt. bars
- PACKING : Wooden shelves
- CERTIFICATION : Italian Quality Mark
- COMPLYNG WITH CEI 23-29 - sheet 1260/EN 50086-2-4
|
|
|
|