|
|
Desktop Design - CADSTAR
CADSTAR is Zuken's Windows based desktop PCB Design solution, easy-to-use, ready-to-use, and easily integrated into your current design environment while preserving your legacy data. While spanning traditional design areas such as schematic capture, placement, routing, library creation and management, signal integrity, EMC analysis, and production of manufacturing data, CADSTAR also delivers powerful add-on technology through its 200,000 components internet libraries, 3D design tool, automatic and high-speed routing, variant management and more, providing you with the productivity of high-end solutions at low-end prices. CADSTAR is completely scaleable, allowing you to grow with your market without the need for swapping technology.
|
|
Enterprise Wide Design - CR-5000
Zuken's CR-5000 is at the heart of a complete design and manufacturing solution for the rapid development and production of leading-edge electronic products. A solution that seamlessly spans organizations, geographic borders, and business processes. A solution that binds the whole process of electronics innovation together. A proven solution that is already central to the success of electronic system manufacturers in Asia , Europe and the North America . In every instance, its implementation is carefully tailored to the needs of each user.
Providing the most advanced PCB design functionality currently available, CR-5000 is constraints driven, from schematic capture through board layout, to the output of manufacturing data. This means that the rules you apply early in the design process are maintained right through to manufacturing. So products are right first time, manufacturable first time, and get to market fast.
|
|
Board Modeler
Bridging the Gap between Electronic and Mechanical Design
Board Modeler is a stand-alone solution to bridge the gap between electronic and mechanical design. Board Modeler reduces iterations between departments, decreases duplication of effort, and provides greater form and fit accuracy.
* Eliminates Duplication of Effort
o Import parts and obstacles from mechanical CAD and export PCB shape, pre-placed components, and mechanical constraints directly to the PCB layout.
* Improves accuracy during 3D clearance checks and final assembly
o Replace inaccurate IDF simplified extrusions with accurate 3D solid models. Web-based library contains thousands of 3D models ensuring up-to-date components.
* Speeds design cycle times by reducing iterations between departments
o Electronics designer can place components and verify clearances in a true 3D environment. Placement is easily back annotated to the PCB layout.
* Provides collaborative floorplanning among all engineering disciplines.
o Concurrent collaborative floorplanning is accomplished by importing information from the schematic, PCB layout, and mechanical environments. Tradeoffs may be examined and problems averted during the product planning stage.
* Simple to use.
o You don't have to be a CAD tool expert to use Board Modeler - the simple and intuitive solution to your complex electro-mechanical problems.
|
|
| ... products without technical information |
| |
Desktop Design - CADSTAR
CADSTAR is Zuken's Windows based desktop PCB Design solution, easy-to-use, ready-to-use, and easily integrated into your current design environment while preserving your legacy data. While spanning traditional design areas such as schematic capture, placement, routing, library creation and management, signal integrity, EMC analysis, and production of manufacturing data, CADSTAR also delivers powerful add-on technology through its 200,000 components internet libraries, 3D design tool, automatic and high-speed routing, variant management and more, providing you with the productivity of high-end solutions at low-end prices. CADSTAR is completely scaleable, allowing you to grow with your market without the need for swapping technology.
|
|
Enterprise Wide Design - CR-5000
Zuken's CR-5000 is at the heart of a complete design and manufacturing solution for the rapid development and production of leading-edge electronic products. A solution that seamlessly spans organizations, geographic borders, and business processes. A solution that binds the whole process of electronics innovation together. A proven solution that is already central to the success of electronic system manufacturers in Asia , Europe and the North America . In every instance, its implementation is carefully tailored to the needs of each user.
Providing the most advanced PCB design functionality currently available, CR-5000 is constraints driven, from schematic capture through board layout, to the output of manufacturing data. This means that the rules you apply early in the design process are maintained right through to manufacturing. So products are right first time, manufacturable first time, and get to market fast.
|
|
Board Modeler
Bridging the Gap between Electronic and Mechanical Design
Board Modeler is a stand-alone solution to bridge the gap between electronic and mechanical design. Board Modeler reduces iterations between departments, decreases duplication of effort, and provides greater form and fit accuracy.
* Eliminates Duplication of Effort
o Import parts and obstacles from mechanical CAD and export PCB shape, pre-placed components, and mechanical constraints directly to the PCB layout.
* Improves accuracy during 3D clearance checks and final assembly
o Replace inaccurate IDF simplified extrusions with accurate 3D solid models. Web-based library contains thousands of 3D models ensuring up-to-date components.
* Speeds design cycle times by reducing iterations between departments
o Electronics designer can place components and verify clearances in a true 3D environment. Placement is easily back annotated to the PCB layout.
* Provides collaborative floorplanning among all engineering disciplines.
o Concurrent collaborative floorplanning is accomplished by importing information from the schematic, PCB layout, and mechanical environments. Tradeoffs may be examined and problems averted during the product planning stage.
* Simple to use.
o You don't have to be a CAD tool expert to use Board Modeler - the simple and intuitive solution to your complex electro-mechanical problems.
|
|
| ... products without technical information |
| |
|
The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies.
|
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation
|
|
|
Powerful digital and analog capabilities make the FaultFinder system a leading PCB fault analysis and diagnostic system. With rapid and excellent return on investment the FaultFinder is ideally suited to PCB repair and failure analysis environments. Having 152 test channels dedicated to synchronised active driver cards. Analog Network Signatures, and Digital Guards, the FaultFinder provides extensive circuit analysis capability without the need for test fixturing. Further flexibility is provided by the optional 1149.1 compliant XJTAG Boundary Scan software.
|
|
DE-F SERIES
Mask-less, New Matrix Beam scan method Suitable for general PWB process with excellent cost-performance
|
|
AutoPoint II is a fixtureless, gridless flying probe with a unique power off impedance analysis measurement system. Capable of detecting manufacturing and in-service faults as standard the measurement system is not limited to a single technique.
With the addition of the MiniScanner a wide range of complimentary instruments, whether from DiagnoSYS or an IEEE/GPIB interface instrument supplier, can be added and fully supported by the TestVue32™ operating software.
|
|
Powerful tool for improving laser-via-hole as well as drilled-hole PWB processes.
To 100% inspection of drilled-hole enabled by high-speed inspection
|
|
Powerful tool for improving laser-via-hole as well as drilled-hole PWB processes.
To 100% inspection of drilled-hole enabled by high-speed inspection
|
|
| ... products without technical information |
| |
APPLICATION - P-C-LITEs are used as circuit board mounting sockets for status, logic and fault detection lights. Also used for back panel lighting, front panel function lights and mounting of photodetection type devices.
VERSATILITY - P-C-LITEs are relampable, no direct soldering to LED. PCH and SMD series mount horizontally, PCV series mounts vertically. The PCV can be installed on one side of the PCB while the LEDs are inserted from the reverse side of the board.
DESIGN - P-C-LITEs are manufactured from UL listed thermoplastics. Unique contact design permits automatic adjustment to the various sizes and shapes of LED leads. Also accommodate IR emitters, phototransistors and incandescent bi-pin lamps.
INSTALLATION - P-C-LITEs are wave soldered (PCH/PCV) or surface mounted (SMD) to PCB along with other components. Sockets are provided with polarity identification. Molded standoffs permit easy board cleaning. Lock-type security for component leads in high vibration and shock environments.
SPECIFICATIONS
MATERIAL: Housing - Thermoplastic, U.L. 94 V0 (black). Contacts - Phosphor bronze, 60/40 tin plated.
|
|
Features
- 1.8 mm sized LEDs save space
- Housing material meets UL94V-0
- Facilitates PCB mounting
- Fast turn on/off time I.C. compatible
- Colors can be mixed in a single housing
- Solid-State, high shock / vibration resistant
- Single color or Bicolor configurations
- Long life / 100,000+ hours (10 years)
- One piece housing
Options
- Sunlight Visible Ultrabrights
- Low Current (2mA) LEDs
- Special colors: Orange, Pure Green, Blue
- Infrareds 840nm, 880nm, 940nm
- Clear illuminator LEDs for backlighting
|
|
| ... products without technical information |
| |
APPLICATION - P-C-LITEs are used as circuit board mounting sockets for status, logic and fault detection lights. Also used for back panel lighting, front panel function lights and mounting of photodetection type devices.
VERSATILITY - P-C-LITEs are relampable, no direct soldering to LED. PCH and SMD series mount horizontally, PCV series mounts vertically. The PCV can be installed on one side of the PCB while the LEDs are inserted from the reverse side of the board.
DESIGN - P-C-LITEs are manufactured from UL listed thermoplastics. Unique contact design permits automatic adjustment to the various sizes and shapes of LED leads. Also accommodate IR emitters, phototransistors and incandescent bi-pin lamps.
INSTALLATION - P-C-LITEs are wave soldered (PCH/PCV) or surface mounted (SMD) to PCB along with other components. Sockets are provided with polarity identification. Molded standoffs permit easy board cleaning. Lock-type security for component leads in high vibration and shock environments.
SPECIFICATIONS
MATERIAL: Housing - Thermoplastic, U.L. 94 V0 (black). Contacts - Phosphor bronze, 60/40 tin plated.
|
|
Features
- 1.8 mm sized LEDs save space
- Housing material meets UL94V-0
- Facilitates PCB mounting
- Fast turn on/off time I.C. compatible
- Colors can be mixed in a single housing
- Solid-State, high shock / vibration resistant
- Single color or Bicolor configurations
- Long life / 100,000+ hours (10 years)
- One piece housing
Options
- Sunlight Visible Ultrabrights
- Low Current (2mA) LEDs
- Special colors: Orange, Pure Green, Blue
- Infrareds 840nm, 880nm, 940nm
- Clear illuminator LEDs for backlighting
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category
