|
|
|
|
|
|
ACCUSCAN 1000 - Intelligent Diameter Measurement
The AccuScan 1000 family of modular gauges is the latest generation of laser
micrometers from the inventors of the laser micrometer. The AccuScan 1000 series has integrated measurement and communications capabilities while maintaining the accuracy and reliability youíve come to expect from Beta LaserMike. Due to in-head Digital Signal Processing, higher scan rates, Fieldbus connectivity and enhance measurement algorithms, the AccuScan 1000 series can go where no laser micrometer has gone before. With a range of models covering dimensions up to 330 mm, the AccuScan 1000 brings precision measurement to your process.
Other systems (Accuscan 5000) are proposed that feature dual axis measurements for ovality, faster measurements for dedicated and continuous applications (Cable, Tube extrusion, ...).
Features :
* (depending on models) measurements from 0.36mm to 330mm
* accuracy from 1 to 20µm
* 500 measurements/second (1000m/sec optional)
* communication output: RS232, analog (Profibus, Devicenet optional)
Benefits:
1- High accuracy for industrial applications
2- Immune to moisture, dirts and product movements
3- Flexibility & easiness of integration
|
|
|
|
|
|
NON-CONTACT MEASUREMENT:
LAP METIS laser sensors measure cross-section and gap without touching the surface. Mechanical micrometers, that may scratch the material, are no longer necessary. There is no wear or tear, neither on the object nor on the sensor. No operator influence affects the measurement.
FAST MEASUREMENT:
Laser scan micrometers may check 100% in the production line. At 800 values per second or even 1600 values per second. No more time consuming samples and offline checks. Instead of momentary images you get errors or tendencies displayed during production, enabeling you to react before crop is produced.
PRECISE MEASUREMENT:
LAP METIS measure at repeatabilities of 2 µm to 8 µm (depending on model) due to calibration and linearisation for every single mirror of the rotating prism. Transparent material can be measured as well as shiny metal or soft and sticky rubber.
SYNCHRONIZED MEASUREMENT:
Sensors are synchronized in multi-axes measurement. Even at high production speeds, there is no mismatch or offset between measurement values in transport direction.
FLEXIBLE MEASUREMENT:
LAP METIS measure precisely up to 10 edges (transitions object - space or space - object). Multi-axes systems also measure non-round profiles as square or polygonal profiles.
|
|
The optoCONTROL 1200 is based on the principle of light quantity measurement. The complete control electronics is inside the receiver and no additional controller is necessary.
High dynamic applications can be measured due to the frequency response of 100 kHz.
|
|
Incremental Length Gauge
- for multipoint measuring applications
- stroke length 30 mm
- compact version
- mounting clamping shaft sleeve
- pneumatic plunger actuation option
- sealing bellows option
|
|
Flexible Hole Location Plug Gages
- Flexible Hole Location Plug Gages inspect the location of a threaded hole in a part
- Determines the true centerline to centerline distances of threaded holes
- Slotted at 90° increments to insure positive location on the thread flanks regardless of hole size
- Center is concentric to the threaded section within .0002” TIR for probe location of CMM’s
- Flexible hole location gages are available in unified and metric sizes
- Precision hand lapped and polished to ensure superior accuracy
- Manufactured to the highest end of the ANSI specifications to ensure maximum wearability
- Final inspection of gages is completed in an environmentally controlled ISO 17025 laboratory
- Available in steel and chrome
- Free NIST certificate of accuracy
|
|
Features:
- Range .248" - .505"
- Complete set with 3 range extensions and assembly tool
- The world smallest self-aligning dial bore gage
- Gaging pin travel (live end) .010" standard (.016" maximum)
- Gage is supplied with .0001" graduation dial indicator and storage case
- Optional carbide contacts and centralizers
|
|
Starrett offers several series of electronic, micrometer and dial readout Bore Gages with two and three point contact. The choice of a variety of special measuring heads for the 78, 780 and 782 tools provides the ability to configure tools for highly specialized internal measurement applications.
The No. 78XT Series Internal Micrometers feature extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages.
|
|
Super Caliper:
- Waterproof and solar powered, with enhanced charge functions
- Top-ranked digital caliper
ABS Coolant Proof Caliper
- Waterproof type available even at worksite.
- Two types of protection levels IP66 and IP67 are provided.
ABS Digimatic Caliper:
- LCD Character Height is 20% increased
- Further smooth slider surface
- Abundant lineup of calipers such as models with no output and with carbide-tipped jaws
|
|
Calipers are the most popular length measuring instruments used worldwide. Owing to their
simple construction, ease of handling and quick operation, they are the favourites in dimensional
measurement. The wide variety of forms and shapes available with exclusive measuring faces
make them the universal hande-held tools.
|
|
- Electronic Calipers - Series No. 797B
- Electronic Calipers - Series No. 799A
- Dial Calipers - Series No. 120, 120M
- Dial Slide Calipers - Series No. 1202
- Offset Dial Caliper - Series No. 120J
- Center Distance Attachment
- Dial Calipers with long nib jaws - Series No. 120B, 120MB
- Master Vernier Calipers - Series No. 123, 123M, 123EM
- Vernier Caliper - No. 125 Series
- Gear Tooth Vernier Calipers - Series Nos. 456, 456M
- Special Master Dial Indicator Vernier Calipers - Series No. 1223, 1223M
- Stainless Steel Pocket Slide Calipers - Series No. 1025, 1025ME
- Stainless Steel Pocket Slide Caliper / Circumference Gage - Series No. 424
|
|
Features:
- Hardened and ground steel plunger, and rest plate
- Masters on any flat service, no special master required
- 3 Blade contact insures accurate repeatable readings
- .001"/0.02mm dial indicator, standard
- Optional digital indicator -.0002" resolution on 90° or .0004" resolution on 127° model
- Inch or metric indicators available
- Includes fitted storage box
|
|
|
|
|
|
General
Measuring surface and hardened steel taper
Scale graduation of indicators: 0.01 mm
Calibration at factory or via setting master
Special designs on request
Internal taper gauge (IKT)
Direct gauging of major diameter of internal tapers or tapered slots
Models with 60°, 90° and 127° taper
Application range: Ø 0.5 mm to 120 mm
Measuring range: 11.5 mm for 60° taper/19.5 mm for 90° and 127° taper
The low-cost Alternative: The Internal Taper Gauge IKT-OS
The term OS is an abbreviation which means "without stop bar". By the omission of the bar, the alternative internal taper gauge can be manufactured at a lower cost which in turn renders a favourable sales price.
The IKT-OS is implemented to measure the largest diameter of internal tapers or tapered grooves. In contrast to its brother product, the IKT-OS requires a contact surface and cannot be used with thin-walled work pieces.
Standard setting masters can be utilised, as well as the corresponding dial indicator or digital dial indicator IKT-MU1086W.
External taper gauge (AKT)
Direct gauging of minor diameter of external taper
Models with 60°, 90° and 127° plungers
Application range: Ø 5 mm to 120 mm
Measuring range: 11 mm for 60° plunger/19.5 mm for 90° and 127° plunger (except for size 1)
Chamfer gauge (KT/KT-B)
Direct gauging of 45° chamfers on rectangular and cylindrical pieces, even bores or slots
Measuring range: chamfers up to 7 mm (radii 1 mm up to 9.5 mm via conversion)
Chamfers in bores from approx. Ø 28 mm
|
|
Tubular Type Depth Micrometer: This spindle integral-type enables stable measurement.
Interchangeable Rod Type Depth Micrometer: Allows wide-range measurement with a single unit by replacing interchangeable rods.
Depth Microchecker: 2 models with a maximum measuring range of 150 mm and 300 mm.
|
|
Large sizes in mechanical engineering mean dimensions in excess of 500 mm.
Besides various measurement procedures like those that apply large internal or external
micrometers with two-point contact, tape rules (wrapping round the outside diameter),
V-bases, rotating measuring disks (rolling-contact) and optical systems (triangulation
with theodolites), resort is often to make use of simple testing means like fixed gauges
(inside calliper gauges), gauge blocks combinations or telescopic adjustable gauges.
|
|
MaraMeter Depth Gage 837
- Large cross beam
- Mounting clamp for a dial / digital indicator
- Application range (in conjunction with anvils 837v: 0-100 mm)
|
|
Starrett Depth Gages are available in many variations, with a choice of electronic, dial, vernier, precision rule and indicator based readouts, and offer a wide variety of ranges. Between our standard products and the Special Gaging that we can work with you to develop, Starrett covers all of your depth measurement requirements.
The new 5004 Series Depth Gages are ideal for large parts. Four sizes
are offered with the largest able to measure depths to 24"/600mm.
Three movable bridge attachments, the largest with a capacity of 24"/600mm, provide additional large part measurement capability These depth gages are made from hardened stainless steel and are coolant resistant.
|
|
Patented measuring system – TESA magna µ system
New electronic caliper – The highest degree of protection ever achieved
with hand-held tools of this type – Totally immune to the penetration
of liquids and particles of metal.
Magnetic measuring system – a TESA’s technology guaranteeing full
reliability and accuracy, even in the toughest conditions of use –
SWISS MADE.
|
|
Digital Calipers
Use for inside and outside length measuring and step measuring using the four caliper jaws.
Depth measurement is provided by the slide that extends from the scale.
* Inch / metric
* 4-way measurement
* Stainless steel
* Reading 0.01mm-0.001"
* Spare battery included
* Supplied in case
|
|
MarCal Waterproof Digital Caliper 16 EW according to IP67
Accurate measurements under extreme conditions!
- Protected against water, oil, dust according to Protection Class IP67
- Inductive waterproof measuring system FPS (Fluid Protected measuring System)
- Reference-Lock-Function secures the zero position and prevents operation errors
- Chemical resistant material Ultradur for housing and buttons
|
|
1300 - 1320 Digital calipers
1300
Technical caracteristics
To DIN 862.
- Accuracy 0.01 mm.
- Resistant to water and cutting oil - IP 65.
- IP 6x = No dust penetration.
- IPx5 = Protected against water jets from any direction during 3 minutes.
- Ground stainless steel mechanism.
- Reading rule with patented inductive measuring system.
- Flat depth gauge.
- 6 mm LCD display.
- Floating zero.
- mm/inch conversion.
- Automatic shutoff.
- Battery life approximately 3,500 hours
- Supplied in a case with a certificate of conformity.
- RS 232 port.
|
|
Precision Made in Switzerland.
- Non-metallic high-tech material with 60% fibre-glass content, extreme rigidity, non-corrosive, non-magnetic, minimum thermal conductivity, electrically insulating and partially ESD tested. Resistant to chemicals (organic solvents, alkalis)
- Particularly suitable for measurements of high-quality and delicate objects. The special product properties open up further application areas not covered by metallic callipers
- Extremely wear-resistant measuring jaws for accurate measurements in the long-term, Swiss-made precision.
|
|
General Purpose Digital Contact Sensor
• Tough, Rugged: IP-67 Enclosure Rating
• Error-free Design W/ Co-transformer Method
• Total Cost Reduction W/ Simplified Set-up
• Easy and Simple Set-up
• One-push Zero Point Adjustment
• Data Communication with 10 Amplifiers
Tough and rugged general purpose digital contact sensor with push button calibration.
|
|
The Baty digital micrometer
* IP54 protection level can be used when exposed to coolant water, dust and oil
* Large LCD
* Inch-metric and zero setting
* SPC output
* Friction thimble
* Chrome plated frame
* Carbide tips
* Resolution 0.001mm (0.00005")
* Automatic power off
* Easy one handed use
* Heat insulated frame
|
|
MarConnect data output (choose between USB, Opto RS232C or Digimatic)
Ratchet integrated in thimble
Large, easy to read display
|
|
Rectangular Guage Block:
- Practical master gage for dimensional measurement
- Two types of steel and ceramic gauge blocks are available.
- Four classes of Class K, Class 0, Class1 and Class 2
Long Size Gauge Block Accessory Sets BMX-S1:
- Accessories for gauge blocks with a nominal size of 125 mm or more
- Used to create the masters of height and size.
- A scriber is also available.
Square Gauge Block:
- 24.1 x 24.1 square gauge block
- Three classes of Class 0, Class 1, and Class 2
- Absolute wringing using the hole
|
|
Application
- As comparison reference and utilization standards in the field of length measurement
- For checking gages and measuring instruments
- For setting devices of all types designed for length measurement and in particular their displays
Accuracy
- The manufacturing process is based on DIN EN ISO 3650. Mahr gage blocks are produced with the utmost care.
|
|
Tubular Inside Micrometer:
- Standard rod-type micrometer
- Measuring range: 50 to 1000 mm with various models
Borematic Holtest: Allows stable measurement of inside diameters with three contact points.
Holtest: Allows stable measurement of small-hole inside diameters with two or three contact points.
|
|
Internal measuring of bores is more demanding than external measurement of workpieces. Not
only the tight tolerances given for the measuring job must be respected, but also the measuring
components that have a direct influence on the uncertainty of measurement must be designed
in such a way that they can enter into the bore to be checked.
|
|
Can be used to measure through holes, blind holes and centering shoulders
Measuring spindle hardened throughout and ground
Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals placed of 120°
|
|
- High-speed linear CCD and telecentric optical system
- 2400 samples/second high-speed sampling
- Repeatability of ±0.06µm
- Maintenance - free LED emitter and design (no laser diode or motor)
- High performance controller with statistical analysis
- Controller with target viewer available for easy setup
|
|
|
|
