|
|
Laser Scan Micrometer LSM-902/6900:
- A high-accuracy type that has attained a linearity of /-0.5 um within the measuring range of 1 to 25 mm
- Resolution: 0.01 to 10 um, Repeatability: /-0.05 um
- For detailed information, leaflet is available on request.
Laser Scan Micrometer LSM-9506:
- A measuring unit/display unit integrated type that assures a linearity of /-2.5 um within the measuring range of 0.5 to 60 mm.
- Resolution: 0.05 to 100 um, Repeatability: /-0.6 um
- For detailed information, leaflet is available on request.
Laser Scan Micrometer LSM-506H:
- A universal 60 mm type that assures a linearity of /-3 um within the measuring range of 1 to 60 mm
- Resolution: 0.05 to 100 um, Repetability: /-0.5 um
- For detailed information, leaflet is available on request.
|
|
Using LVDT technology, Trans-Tek manufacturers three different lines of Gaging Transducers capable of measuring up to 20 inches. Gaging transducers are often selected over free-unguided LVDTs when a hard connection cannot be made to the moving object. All units consist of a spring-loaded shaft guided through a phosphorous bronze, leaded bearing. A hardened steel contact tip touches the object to be measured.
Click on the Product Line most closely matching your requirements:
Series 310-320 AC Gaging: 0.5 to 20 inch stroke, 0.875 OD, connector term.
Series 330 AC Gaging: 0.01 to 2.0 inch stroke; 0.375 OD, cable term.
Series 350 DC Gaging: 0.10 to 6.0 inch stroke; various ODs and terminations
|
|
GS-1000 is a long range contact type linear gauge sensor which has a linear type displacement converter and converts spindle displacement directly into electric signals.
The adoption of ball spline bearings in the spindle has resulted in increased torsional rigidity (10 times as much as our conventional one) and of durability (practical durability of more than 10 million times) of the spindle.
The sensor is suitable for use in dangerous places and where measured values cannot be directly observed and for being incorporated in machines.
Features
- Long range of 100 mm
- High durability (2.5 times as much as our conventional one)
- Optimum for machine production, building and civil engineering fields
|
|
Features:
- Self centering sleeve eliminates operator influence for extremely accurate applications
- Non tipping design offers fast / simple accurate results
- Available with a dial or digital indicator or can be fitted with LVDT probles sleeves which is ground approximately .001" smaller than the lower limit of the bore being inspected
- Single dial unit housing can be used with interchangeable plug heads
- Plug heads available in any size between . 078" - 9.00" (2.0mm - 230mm)
- Plug heads: choice of 3 "H" dimensions allows measurement of thru bores, blind holes or super blind holes
- Optional Armoloy coating (Rc 72-74) on plug head
|
|
|
Hurco's wide range of backgauges suits a variety of applications for up-acting and down-acting press brakes. The Autobend gauges work with either the Autobend 7 or Autobend 6 control to make your press brakes smarter. Take the next step by using a 3-axis system, which results in a 40% reduction in setup time when compared to a 2-axis system. Both 2-axis and 3-axis Autobend gauge systems reduce run time and material handling while increasing production capacity.
|
|
|
|
|
|
The robust, easy to use SmartPlug range is designed to give the operator greater speed of use, unmatched measuring accuracy and superb repeatability, especially in harsh shop - floor environments. Advanced hand held ergonomics allied to an ingenious mechanical / electronic system render SmartPlugs the easiest to operate Bowers bore gauging system to date. The flexible nature of Bowers SmartPlugs range means that they can be supplied fitted with easy to read electronic indicators (ideal for automatic data collection), conventional analogue indicators, or transducer probes linked to remote digital readout units.
* Range 6 - 280mm
* Tough, robust construction
* Easy-to-use
* Long life
* High accuracy dedicated plug-gauges
* Flexible, modular
* Hand-held measurement
* Can be incorporated into automated measuring systems (in-series)
* Cost-effective
* Short delivery times
* High visibility display
* Protective indicator shroud (with some indicators)
* All setting rings supplied as standard with UKAS calibration certificates
* Coverplates as standard on all SmartPlugs
* Specials (e.g. blind bore) on request
* Repeatability ²1 µm
* Setting by means of a setting ring
* Quick and reliable measurement
* 2 - point measurement as standard
* Blind bore available on request
* Depth-stops available
* Extensions available for deeper bores
* Guide chamfer for easy entry into bore
* High durability, long-life plugs and contacts
* Easy to clean
* Plug body coatings: Hard-chrome (standard), T.i.N., Plain steel
* Measuring contacts: Tungsten carbide, (standard), hard-chrome, ruby, ceramic
|
|
The Bowers Checkmatic is a universal comparator gauge with a built in multifunctional digital display. This versatile gauge can be configured in a multitude of ways facilitating the rapid, accurate, internal or external gauging of both simple and complex components.
A comprehensive range of accesories is available for the Bowers Checkmatic, alternatively special accessories can be designed for more specialised applications.
|
|
- Capacity of 0-25mm
- Pearl chrome plated frame with insulation pads
- Tapered bow frame
- Hardened steel or tungsten carbide measuring faces
- 6.8mm spindle diameter
- Speeder' type ratchet
- Locking lever
- Choice of standard or vernier type sleeve
- Adjusting key
- Supplied complete with durable plastic pocket case
|
|
|
|
|
|
TMI 49-60, 61, 62 and 63 Series Micrometers provide the precision necessary for the critical thickness measurement of numerous sheet materials.
APPLICATIONS
Films, Foils, Papers, Tissue, Corrugated, Paperboard, Carton board, Plastics, Rubber, Felt, Fiberboard
SPECIFICATIONS
* Meets ASTM D-645, D-374, TAPPI T-411, AS/NZ 1031, 426, 1031, 427, SCAN P7, DIN 53105, ISO 534
* Ranges of measurement:
49-60 series: 0-.050 × .00001 in.
49-61 series: 0-1.250 mm × .0005 mm
49-62 series: 0- 0.5 in. × .0001 in.
49-63 series: 0-12 mm × .001 mm . 76.20 mm (3 in.) throat depth
* Standard anvil diameter 16 mm. (0.63 in)
* Load: 7.3 psi (50.4 kPa)
FEATURES
* Digital display
* RS-232C output
* Motorized automatic cycling
* Standby feature
* Compatible with TMI's 49-66 Monitor/ MicrometerT for increased output capabilities
* Calibrated gauge blocks are available to meet your needs
INSTRUMENT SIZE
Depth: 305 mm (12 in.)
Height: 381 mm (15 in.)
Width: 279 mm (11 in.)
Weight 23.6 kg (52 lb)
Electrical: Specify voltage requirements when ordering
ORDERING INFORMATION
Catalog Number: 49-60
|
|
Micrometric head with hardened and ground 6 mm diameter screw. Contact surfaces in carbide. Manufactured as per DIN 863/1.
Supplied in case.
|
|
On-line thickness measurement systems for:
* flat films and sheets, thermo-formed sheets made of PET, PVC, PUR, etc.
* coexruded film
* coated and uncoated rubber sheets
Thickness range: 10 µm ... 6 mm
Measuring uncertainty: 1 % of reading
The measuring system is unaffected by variations in density, humidity and colour of the material t be measured as well as unaffected by variations in temperature or vibrations of the surrounding fields.
|
|
|
|
|
|
The Bowers Universal Gauge's ingenious modular format enables it to be quickly configured to suit almost any measuring challenge. Whether measuring internally or externally, the Universal's clever constant pressure device ensures accuracy and consistency of reading. The gauge's findings are displayed on its built in clear digital readout.
The unique modular construction of the Bowers Universal Gauge facilitates the fitting of a large variety of measuring contacts and adaptors, enabling countless measuring tasks to be completed with ease. Accessories for the measurement of threads, grooves, splines, gears, hole centres, and many others are available as standard, whilst special adaptations for more unusual applications can be quoted on request.
Features
* Internal and external measurement
* Large measuring range possible 0 - 3000mm (0 - 118")
* Constant measuring force
* Digital or mechanical readout display
* Large range of accessories for standard measurement of threads, grooves, splines, diameters, lengths, shallow spigots and recess diameters etc
* Special anvil designs available P.O.A
|
|
MICI 80 / 180
motion up to 180 µm
high resonant frequency
parallelogram construction
additional mass up to 20 kg
applications:
quality control
automation
fine adjustment of optical components
mikro-assembly
This element was originally developed for quality control in the optical industry %u2013 it consists of a piezostage in combination with a micrometer drive.
The user can first adjust the position of the actuator and then fine-tune this position with the aid of the piezostage.
The resolution is in the nm and sub-nm range.
Because of the very robust construction of the element, an additional mass of up to 20 kg can be lifted.
|
|
|
Scanning Frames are a critical factor in making a profile measurement. If the material is not presented to the sensor in an accurate and repeatable way, you will not be able to get the most accurate and repeatable measurement. This is why NDC places emphasis on engineering and producing the most accurate scanning frames in the industry. Our scanning frames' registration performance, coupled with our sensors' accuracy and repeatability, give you the most accurate profile measuring tool available.
|
|
Optical micrometers.
RF65X Series
Application domain
Laser micrometers are designed for non-contact measurement and control of position and dimensoins (diameter, thickness, gaps) of technological objects as well as for measuring levels of liquid and bulk materials .
RF651 model. Operating principle
The micrometer operation is based on the so-called shadow principle. The micrometer consists of two blocks transmitter, 1 and receiver, 2. Radiation of a semiconductor laser 3 is collimated by a lens 4. With an object, 5 placed in the collimated beam region, shadow image formed is scanned with a CCD photo-detector array 6. A processor 7 calculates the position (size) of the object from the position of shadow border (borders)
|
|
Functional Gages - Spline Gages
PECo offers a variety of functional Go and No-Go composite and variable indicating Spline Gages to support your inspection needs. All PECo Spline Gages are designed, manufactured, and supplied, complete with inspection certificates, to meet your specific application requirements.
|
|
Solartron’s Universal Block Gauge makes precision measurements a simple and reliable process within cavities, internal diameters and more generally when space is limited.
The Universal Flexure Gauge is a compact, frictionless parallelogram device that does not suffer from the wear usually associated with bearing systems
|
|
General description
- Self-centring high-precision indicating plug gauge allowing static and dynamic measuring
- Application in manufacturing of high-precision bores from Ø 2.98 mm to 270 mm/0.117" to 10.62"
- Measuring range: 0.1 mm to 0.8 mm depending on diameter and type
- Calibration in setting ring
- Various contact points (material and design) depending on work-piece type
- Many designs in standard programme
- Special design on request
- Extensive range of accessories
- Setting rings according to DIN2250-C in standard programme (range Ø 1 mm to 300 mm/0.04" to 11.8")
- Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors.
|
|
Brass Thickness Gage
Plastic Thickness Gage Assortments
Stainless Steel Thickness Gage
Steel Feeler Gage - Decimal Thicknesses
Steel Feeler Gage - Metric Thicknesses
|
|
The instruments of the type VM have a guiding profile, with which the dimension over balls can be established quickly and reliably, without rocking. The guiding profile is matched with that of the profile of the test item.
The VM inspection instruments display in this series their professionalism. They are robust, simple and with regard to accuracy independent of the operator. The range of VM instruments covers simple hand held devices, through to longitudinal dynamic inspection systems and fully automated FAPP systems. A UPM-certificate specifies the measuring uncertainty of the instrument and enables determination of the measuring uncertainty during usage.
|
|
Internal gear gauges (IV)
For gauging of measurement between balls (Mi)
Constructed in the same way as the split-ball and plunger probe system
Application range: Mi = 3.5 mm up to 333 mm/ 0.14" to 13"
Measuring range: 0.6 mm to 1.6 mm for split-ball system (Mi = 3.5 mm to 26.1 mm/0.14" to 1.03") 3 mm for plunger probe system (Mi = 26.1 mm to 333 mm/ 1.03" to 13")
Split-ball and plunger probe accessories can be applied
Tungsten carbide measuring balls
Special designs and gauge slides on request
External gear gauges (AV)
For gauging of measurement across balls (Ma)
Application range: Ma = 10 mm to 140 mm/0.4" to 5.5"
Measuring range: 30 mm/1.2"
Tungsten carbide measuring balls
For use in MST-102 measuring stand
|
|
Digimatic Outside Micrometer:
- 1/1000 mm graduation, Standard model: waterproof type
- Measuring range: up to 300 mm
Soft Touch Micro:
- Variable measuring force type, optimal for measuring soft materials
- Two different measuring force types are available according to the purpose.
Quick Micro:
- 10 mm feed per thimble rotation
- Speedy measuring operation is possible.
Ratchet Thimble Micrometer:
Both speeder unit and thimble unit have a constant pressure mechanism.
- Stable measurement results are obtained with one-hand operation.
|
|
Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented by the French inventor Jean Laurent Palmer as «calibre à vis et à vernier circulaire» (screw calliper with a circular vernier). Today, we continue to
make external micrometers with these typical features.
|
|
Micromar Waterproof Digital Micrometer 40 EW
Micromar 40 EW, the newest generation of waterproof digital micrometers ensures that even in the most difficult workshop conditions precise and reliable results are obtained
- Protected against water, oil and dust acroding to protection class IP65
- Reference-Lock-Function secures the zero position and prevents operation errors
- Chemical resistant material Ultradur for housing and buttons
- MarConnect data output, select either USB, OPTO RS232C or Digimatic
|
|
The Starrett family of micrometers include a very broad range of products, from the 0-1" electronic or mechanical tools that are staples of every day shop use, to tools for highly specialized applications.
- Outside Micrometers
- Outside Micrometers Special Function
- Micrometer Heads
- Bench Micrometers
- Precision End Measuring Rods
- Inside Micrometers
- Depth Micrometers
|
|
Technical caracteristics
DIN 863.
- Floating zero.
- Preset.
- Metric/inch units.
- MAX, MIN, MAX-MIN tolerances.
- RS 232 port.
- Design features :
- non-rotating setting rod.
- carbide anvil 8 mm.
- Battery life up to 2,000 hours.
- Accuracy 0.002 mm.
- Supplied with a FACOM certificate of conformity.
: 810 g.
|
|
Micrometer Head MHC:
- Space-saving type that suppresses the entire length.
- Models with a measuring range of 6.5 mm and 13 mm
Micrometer Head MHS:
- Universal type with a measuring range of 13 mm
- Widely-used compact model
Micrometer Head MHA:
- Universal type with a measuring range of 13 mm
- Easy to adjust the zero point of the thimble.
|
|
Corning Tropel Corporation designed the UltraFlat 200 Mask System specifically for the photomask industry. It delivers the lowest measurement uncertainty for ever-tightening mask flatness specifications. Shrinking device features require not only flatter wafers, but flatter masks.
The UltraFlat system is used to measure flatness of photoblanks and photomasks throughout every stage of manufacturing and use, including, substrate polishing, coating and patterning to analyze film stress, and verification.
UltraFlat system utilizes near-normal incidence interferometry, rock solid structural design, state-of-the-art optical fabrication techniques and Tropel's renowned phase shifting analysis software to deliver 20 nanometer measurement uncertainty.
The system is NIST traceable and provides measurements that conform to SEMI standards. An automated photomask handling and measurement configuration is also available.
|
|
|
The Optical Micrometer is a portable instrument capable of making non-contact depth measurements on virtually any surface, curved or flat. Available with either 100x or 200x magnification, an easy to read venier scale enables the operator to optically measure the difference in height of one surface to another; an optional reticle eyepiece allows width measurements. This instrument is useful for measuring depth of scratches, cracks, blind holes, dents, pits and other surface blemishes in all types of materials. For transparent materials (i.e. glass, acrylic), the optical micrometer can measure crazing, fractures, embedded voids and material thickness. Popular in the aircraft industry, the optical micrometer may be used in the field to measure surface features on windshields, leading edges, airframes, fuselage skin, propeller blades, rotor blades, coated surfaces, plus many more.
|
|
|
|
