|
|
MarStand Indicator Stand 815 MG with flexible stem
- Flexible in any direction, arm can be locked in position
- The sleeves and grounded steel balls of the stem are compressed with a strong steel cable
- Indicating instrument can be rotated through ± 90°
|
|
|
The Bowers Snapmatic snap gauge has been designed specifically for quick, reliable and accurate measurement of external cylindrical diameters. Particularly suitable for use in series production, the instrument is tough and solid enough to use on the machine in the workshop and flexible enough to be used in the measuring room for sample measurements. The measuring surfaces are of top-quality tungsten carbide mounted on a no-maintenance spring-operated mechanism. Special anvils (e.g for grooves etc) can be fitted to the standard gauge by means of the mounting holes in the anvil.
|
|
|
|
|
|
Features:
- Checks multiple shapes. A combination of contact points, backstops and accessories may be selected and custom assembled to meet the most exacting needs.
- Comparative measurements can be made of almost any shape: diameters, spheres, grooves, shafts, flats, etc.
- Specifically designed for Dorsey's high amplification dial indicators with graduations as fine as .00002" (0.0005mm)
- Two frame sizes are available
- Hand held or mount on an optional bench stand
- Utilizes dial and digital indicators as well as electronic transducers. Display on electronic columns or remote digital devices.
- SPC compatible.
- Tailstock fine adjustment of 1" maintains contact parallelism throughout the gaging range
- Standard thumb actuated retraction of .100" makes part loading easy
- Contacts suitable for most applications can be supplied from a wide variety in stock. All anvils utilize shank-lock design for maximum holding pressure
- Several backstop designs are available to accommodate a variety
of part configurations
|
|
MaraMeter Indicating Snap Gage 840 FC with Ceramic Measuring Faces
- Rugged, forged steel frame with heat insulators
- Maximum wear resistance due to non-contact positioning in conjunction with carbide-tipped measuring faces
- Constant measuring force as a result of built-in spring, thus eliminating user influence
|
|
Our product range includes the following production series:
* Series KSN
* Series SFM
* Series GRN-NC
* Series HF, IR, ICS
Series HF, IR, ICS
In addition to the products described here we would like to mention our tap holders series HF, and our IR tap holders for tool control. If you are looking for a "complete solution" in the field of tool control our ICS system is the best choice for you.
|
|
XT Bore Gauges
Superbore Bore Gauges
Specialised Bore Measurement
SmartPlugs
Digital Cylinder Bore Gauges
Mechanical Cylinder Bore Gauges
|
|
|
Bowers Ultima Bore Gauge offers a choice of resolutions up to 0.0001mm. Featuring the NEW Bowers ‘FASTFIT’ measuring heads with extended measuring range (above 14mm), the Ultima boasts a simple lever operation and a constant measuring force, ensuring outstanding ease of use and repeatability under laboratory or shop-floor conditions.
|
|
|
Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2 - 300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads and setting rings are supplied with UKAS certification.
|
|
|
Bore gauges with hardened steel contact surfaces for small bores. The travel on the contact surfaces is trasmitted via a needle in hardened steel a 1:1 ration. Interchangeable ogive in hardened steel, heat-insulated handle. Manufactured as per DIN 878, Supplied in case without dial indicator. Version with contact surfaces in hard metal available upon requirement.
|
|
- Standard workshop model with stop screw
- Assembly slider model
- 4-way measurement
- Made of hardened alloyed stainless steel
- Chromed scale with engraved graduations
- Measuring surface is micro-lapped
- Packed in plastic box
|
|
Code: Art. 1/34
Vernier calipers for big dimensions
Monoblock caliper in hardened stainless steel. Satin-chromed readout scale. Etched, precision graduation, easy to read and long-lasting. Raised slider for easy movement. Slider locking screw with micrometric adjustment and lapped contact surfaces.
Slide stop at beam end. Serial number
|
|
The GapGun handheld laser gauge is a quality assurance
tool that checks product build geometry in production,
maintenance and repair facilities.
Our GapGun customers are spread across the globe from the Far East through Europe to the USA, and include the worlds leading aerospace and automotive companies (see logos).
Typical applications include:
Chamfer, radius and Break Sharp Edge measurement
Automotive painted and Body in White (BIW)
Aerospace panels, doors and hatches.
Interiors, dashboards and trim
Proven to meet or exceed QS9000-MSA for a wide variety of measurement types, the GapGun will boost your measurement capability and data collection rates.
GapGun - Save Time, Save Money, Increase Accuracy
|
|
|
|
|
|
Designed to accurately perform a wide variety of measuring tasks, the new Bowers UniCal multi-purpose digital caliper range is available in 300mm, 600mm and 1000mm capacities, with larger versions available upon request. This revolutionary new technology boasts tough, lightweight reinforced beams, giving it incredible strength and weightlessness. Advanced features include a large easy to read digital display, preset facility, constant measuring force, metric inch conversion and RS 232 data output port.
Features:
* Ranges : 0 - 300, 0 - 600, 0 - 1000 (larger versions available upon request)
* Preset facility for internal / external measurement
* Constant measuring force
* Hold feature, freezes display for later viewing
* Incremental floating zero
* Metric/Inch switchable
* Resolution : 0.01 mm / 0.0005"
* MIN/MAX function
* Tolerance indicators
* 5mm Ø mounting bores on the top and underneath the gauge
* Adapters available to fit Bowers Universal Gauge accessories (see pages 32-34)
* Wide range of measuring contacts available
* Large easy to read LCD display, height of digits 8.5mm
* RS 232 output
* Water resistant
|
|
IP54 Water Resistand Digitronic Caliper - WR Series
Standard: DIN 862
Features
Water and dust resistant to IP54 specification
Functions: mm/inch conversion, on/off, zero setting
Patented ceramic capacitive sensor
Large LCD display
CR2032 battery
|
|
Code: Art. 18/54
Digital caliper with knife points for external measurements
Digital caliper in hardened stainless steel. 5 figure liquid crystal display and minus sign. State-of-the-art electronics. mm/inch conversion. Set to zero in any position. RS232C output to printer port. Micrometric adjustment screw. Slider locking screw. Knife points for external measurements. Battery powered. Serial number.
|
|
Digital Outside Micrometer - 201 Series
Protected to IP54 specifications
Rugged steel design
Large LCD display
Absolute and Incremental modes
Carbide Measuring faces
Ball attachment included
|
|
TMI 49-70 and 49-72 Series Micrometers provide the precision necessary for the critical thickness measurement of numerous sheet materials.
APPLICATIONS
Films, Foils, Tissue, Papers, Corrugated, Paperboard, Plastics, Felt, Rubber, Fiberboard, Carton board
SPECIFICATIONS
* Range of measurement:Model 49-70: 0.0 to 1.270 x .003 mm;(0.0 to 0.050 x .0001 in.)
* Range of measurement:Model 49-72: 0.0 to 12.70 x .03 mm;(0.0 to 0.5 x .001 in.)
* Standard anvil diameter 16 mm (0.63 in.)
* Load: 7.3 psi (50.4 kPa)
FEATURES
* Digital display
* Dual range (Imperial or Metric)
* Motorized automatic cycling
* 5-second test cycle
* Special anvil diameters and dead weight loads available upon request
* Calibrated gauge blocks are available to meet your needs
|
|
|
|
|
|
Model 49-5X is a precision micrometer for measuring thickness of sheet materials such as Textiles, Fabrics and Non-wovens. A selection of pressure feet is available to meet a variety of standards requirements. The unit also incorporates a unique cantilever system to vary the pressure exerted on the sample by adding or removing weights. Pressure foot speed and dwell time are controlled to insure accurate and repeatable test results.
APPLICATIONS
Paper, Paperboard, Corrugated, Cloth, Plastic, Rubber, Plastic Film, Textile Fabrics, Non-wovens, Felts, Geomaterials, Floor Coverings, Leathers and Wipes.
SPECIFICATIONS
(49-50) (49-52)
Range: 0 to 2 mm 0 to 20 mm
Resolution: 0.001 mm* 0.01 mm*
Accuracy: ±0.0025 mm
up to 1.25 mm ±0.025 mm
Repeatability: 0.1% of range
Operating Temp. +20°C to +30°C
*Resolution increased by a factor of ten to 0.1μm (for 49-50) and to 1.0μm (for 49-52)
FEATURES
* Large LCD display
* Electronic compensation minimizes displacement transducer non-linearity
* Rigid cast aluminum base assures thermal and mechanical stability
* Foot switch allows hands-free operation of test button
* RS-232 data output
* Range: 0 to 2 mm and 0 to 20 mm
* Resolution: 0.001 mm*
* Accuracy: ±0.0025 mm up to 1.25 mm
* Repeatability: 0.1% of range
* Operating temperature: +20°C to +30°C
|
|
|
Micrometer for external measurements with digital reading. Frame in steel. Hardened screw and contact surfaces in carbide. Direct mm./inch conversion. Set to zero in any position. Serial number. Manufactured as per DIN 863/1. Supplied in case.
|
|
Composition of parallel gauge blocks in top-quality non-deformable steel. Supplied in case, serial number on each block. Manufactured as per DIN 861. Three different grades are available:
Gr. 0: suitable for metrology rooms and as references for checking other blocks.
Gr. 1: suitable for checking and calibrating measuring instruments.
Gr. 2: suitable for checking production and setting measuring instruments.
Blocks of different dimensions and at any quality are available upon requirement.
|
|
The Bowers XT Holematic bore gauge incorporates an ergonomic pistol grip handle with an advanced trigger action, giving the user the advantages of both speed and accuracy of operation with a constantly applied measuring pressure. The clear digital display, superior electronics and application range of 2 to 300 mm ensures ease of use and assured accuracy.
The XT Holematic pistol grip range of bore gauges can be supplied as individual instruments or in complete sets. All XT instruments give the user the advantage of extended measuring travel with fixed anvils and UKAS certification of both measuring head and setting ring as standard.
|
|
|
|
|
|
Prompted by demand from their global network of agents and distributors, Bowers Metrology has announced the launch of a major new addition to its best selling XT Xtreme Bore Gauging range. Complementing the company’s popular pistol-grip and internal-micrometer models, the robust new XT Lever range is perfect for vertical bore measurement, providing accurate and repeatable bore gauging under inspection department or shop-floor conditions.
Aiding ease of use, Bowers’ new XT Lever bore gauges have a simple ergonomic action and can be fitted with a wide variety of analogue and digital indicators or even transducer probes. For use within hostile measuring environments, such as in close proximity to Machine Tools, Bowers flexible new range can be provided with IP 65 rated digital indicators, rendering them resistant to coolant, water and airborne particles. A ‘wireless’ gauge module is also available, enabling cable free communication with remote data collectors, computers etc.
The cost-effective new range of XT Lever bore gauges boast hardwearing extended travel carbide measuring anvils and are able to measure diameters up to 300mm. Bowers is also able to manufacture affordable ‘one-off’ XT Lever instruments to cater for a wide range of other problematic, internal measuring applications, such as threads, grooves, splines, etc.
|
|
The optoCONTROL 1200 is based on the principle of light quantity measurement. The complete control electronics is inside the receiver and no additional controller is necessary.
High dynamic applications can be measured due to the frequency response of 100 kHz.
|
|
Developed to measure both internal and external diameters and lengths, the gauge’s aluminium extrusion beam gives it a rigid, yet lightweight quality – making it ideal for shop-floor environments. The simple release of a locking thumb screw enables the gauge’s measuring direction to be changed easily and quickly.
The four gauges in the Intex range have been designed to measure components from 200mm up to 1m long; however extended lengths are available on request.
Features:
* Lightweight and rigid - typically weighing less than 2kg
* Internal and external measurement
* 2mm travel on moving contacts
* Adjustable fixed contacts with a range of adjustment up to 250mm
* Digital or mechanical readout display
* Hardened steel wear pads locate gauge on to the component aiding accuracy, repeatability and prolonging the life of the instrument
|
|
Incremental length gauges from HEIDENHAIN offer high accuracy over long measuring ranges. These sturdily made gauges are available in application-oriented versions.
They have a wide range of applications in production metrology, in multipoint inspection stations, measuring equipment monitoring, and as position measuring devices.
|
|
Solartron Analogue Gauging Probes incorporate a precision linear bearing, which gives exceptional repeatability.
• Spring Push
• Pneumatic Push or Vacuum Retract
• Feather Touch
The ultimate in rapid, high accuracy measurement.
|
|
|
The Fowler/Bowers range of mechanical two and three point bore micrometers are now available as XT extended travel versions between .080"/2mm and 12"/300mm. This allows wide measurement range without the need to interchange anvils.
|
|
For internal and external precision measurements
Indicator reading for comparative measurements.
Unimeter Type UNI I
Entirely for internal measurements.
Type UNI 2I - measuring range 28-247 mm
Type UNI 2LI - measuring range 28-347 mm
Type UNI 2ELI - measuring range 28-447 mm
Unimeter Type UNI O
Entirely for external measurements.
Type UNI 2O - measuring range 0-220 mm
Type UNI 2LO - measuring range 0-320 mm
Type UNI 2ELO - measuring range 0-420 mm
Unimeter Type UNI M - for anvils
Either internal or external measurements with various anvils.
Unimeter Type UNI M - for discs
Either internal or external measurements with measuring discs.
|
|
|
|
|
|
A refinement in calipers is the replacement of the analog dial with an electronic digital display on which the reading is displayed. Some digital calipers can be switched between metric and inch units. All provide for zeroing the display at any point along the slide, allowing the same sort of differential measurements as with the dial caliper but without the need to read numbers that may be upside down. Digital calipers may contain some sort of "reading hold" feature, allowing the reading of dimensions even in awkward locations where the display cannot be seen.
Even with all of these benefits, digital calipers have by no means replaced the dial caliper. Digital calipers typically do not have the beam structure of a dial or vernier caliper and therefore do not have the repeatability or accuracy to an amateur user.
Digital calipers offer a serial data output. Measurements can be taken and instantly stored in a spreadsheet or similar piece of software, significantly decreasing the time taken to take and record a series of measurements. Like dial calipers, the slide of a digital caliper can usually be locked using a lever or thumb-screw. Both dial and digital calipers can be used with accessories that extend their usefulness.
|
|
We offer three main versions of our Digital Probe
• Spring Push
• Pneumatic Push
• Feather Touch
The Probe is an absolute measuring device that delivers accurate results when switched on, regardless of any 'OFF' movements.
|
|
|
|
