|
|
The CoolView VHR is a high resolution CCD camera which has 4000x2672 pixels and interline transfer architecture which allows the CCD to operate without a shutter and at 100% duty cycle. The CCD has a high quantum efficiency of typically 45% @ 550nm.
The camera is deep cooled with DT of 35°C, and uses a Peltier with secondary air cooling. A water cooled version for deeper cooling is also available. The camera has a fast 10MHz readout rate with digitisation to 12 bits and also features a high dynamic range 16-bit mode. The camera features on chip binning and sub area readout.
|
|
hsfc pro
Having a single optical input, this camera system comprises a image splitter unit, four intensified CCD camera modules with fast switchable MCP image intensifiers and high resolution CCD image sensors. Each module with its 12 bit dynamic range and a high resolution CCD image sensor features an excellent signal-to-noise-ratio and the ability of single photon detection. Four high speed serial fiber optic data links connect the system to the PC. It can be triggered externally by light or electrical input.
|
|
dicam pro
This is a high performance intensified CCD camera system with gating times down to 1.5 ns. With its 12 bit dynamic range and a high resolution CCD image sensor it features an excellent signal-to-noise-ratio and the ability of single photon detection. The system is suited for applications in environments with high electromagnetic disturbances. A high speed serial fiber optic data link connects the system to the PC. The camera can be triggered by light or electrical input.
|
|
|
|
|
|
CoolView IDI:
The CoolView IDI features a 1392 x 1040 pixel CCD coupled, by the latest bonding technology, to a specially-developed high resolution image intensifier. Spectral response can be chosen for red, green or blue peak response. A gated version with 5ns gating is also available.
ISIS-4:
The ISIS-4 is an ultra-high gain intensified CCD camera with a double micro-channel plate image intensifier, allowing photon-counting efficiency and ultimate sensitivity. The image intensifier features an extremely low noise photocathode even without cooling, and the optimised electron-optical design produces detection efficiencies in excess of those achieved with standard GaAS (‘third generation’) photocathodes. CCIR or EIA readout.
ISIS-4/1000:
The ISIS-4/1000 is designed for very fast imaging applications and uses camera electronics to provide 1000 frames per second CCD. The double MCP is used to provide sufficient flux, and combined with manual gain control can be used in a variety of light levels from photon counting to fast dynamic imaging at higher light levels. The camera system can be provided with a frame grabber PC and software to provide a complete imaging solution.
ISIS-3:
The ISIS-3 is an intensified camera with the latest image intensifier technology. The use of high resolution MCPs and the technique of using a fibre optic taper to couple the intensifier to the CCD results in excellent image quality.
|
|
sensicam qe
This high performance cooled digital 12 bit CCD camera system comprises advanced CCD and electronics technology. The system features thermo-electrical cooling of the image sensor (down to – 12 °C), extremely low noise (down to 4 e- rms) and an outstanding quantum efficiency, which achieves a high spectral sensitivity in general and especially in the NIR. Exposure time modes (software selectable) range from 500 ns (fast shutter) to 3600 s (long exposure). A high speed serial data link connects the system to the PC (fiber optic link available). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as fluorescence imaging, confocal & light microscopy etc..
|
|
|
|
|
|
Key points
- Ultra-small
- Excellent antiblooming characteristics
- Continuous variable-speed shutter
- High sensibility and low dark current
We offer as standard 2 devices: 1/6" and 1/10":
1/6" LYNX 59.60/LYNX 59.90 (respectively offering field of vision angles of 50° and 90°)
- Interline CCD image sensor
- Image size: Diagonal 3mm (Type 1/6)
- Number of effective pixels: 752 (H) x 582 (V) approx. 440K pixels
- Total number of pixels: 795 (H) x 596 (V) approx. 470K pixels
- Chip size: 3.30mm (H) x 2.95mm (V)
- Substrate material: Silicon
- Cable: length: 4.5m - ø 3mm (ø 2.1mm without plastic sheath)
- Head: ø 5.9mm - length: 20mm
1/10" LYNX 34.90
- Interline CCD image sensor
- Image size: Diagonal 1.8mm (Type 1/10)
- Number of effective pixels: 510 (H) x 492 (V) approx. 290K pixels
- Total number of pixels: 537 (H) x 505 (V) approx. 320K pixels
- Chip size: 2.00mm (H) x 2.00mm (V)
- Unit cell size: 2.90µm (H) x 2.25µm (V)
- Substrate material: Silicon
- Cable: length: 4.5m - ø 3mm (ø 2.1mm without plastic sheath)
- Head: ø 3.4mm - length: 16.5mm
|
|
The Pix-Cell Camera is a high performance, programmable Cellular Single Board Controller, that offers built-in digital and analog I/O combined with GSM/GPRS connectivity in a compact form factor. With this GSM camera it is possible to take a picture and send it all over the world.
Features:
- Small Size: 95x60x15mm.
- JPEG resolution 640x480, 320x240.
- Remote camera activation through SMS or short call.
- Microchip PIC18F6722 controller at 32MHz.
- 128KB Flash for user memory application.
- 32kB of EEPROM Memory.
- 3 Protected Digital Inputs.
- 3 10-bit Analog Inputs.
- RS232 serial communication.
|
|
pixelfly vga
This high performance digital 12 bit CCD camera system features state of the art in CCD and electronics technology. The system consists of an ultra compact camera head, which either connects to a standard PCI or a compact PCI board via a high speed serial data link. The available exposure times range from 10 µs to 10 s. A digital temperature compensation is integrated instead of a space consuming thermo-electrical cooling unit. All camera functions can be remotely accessed and controlled via digital interface. This compact digital CCD camera system is perfectly suited for many scientific and industrial imaging applications, like microscopy, spectroscopy and quality control.
|
|
|
|
|
|
Lumenera's Mini Lm165 Industrial USB 2.0 Camera
Measuring 44x44x56mm, these compact cameras offer the same performance as our enhanced USB 2.0 camera line, delivering outstanding image quality and value. Features include new locking industrial mini USB and RJ45 GPI/O connector, multiple mounting points, 60 fps at full 640x480 resolution, 100+ fps at 320x240 binning mode, and on-board processing and sensitivity provide outstanding image quality. Both color and monochrome product models are fully supported by the Lumenera Software Developer’s Kit with an application programming interface compatible with C++ and Visual Basic.
CAMERA SENSOR
Image Sensor 2/3” format, color or mono, 9.0mm x 6.7mm array
Effective Pixels 1392 x 1040, 6.45µm square pixels
Frame Rate 15 fps at 1392 x 1040, 30 fps at 640x480 (binned or ROI)
Sensitivity Extremely High
Dynamic Range 66dB
Exposure Manual
White Balance Auto / Manual
Dimensions (W x H x D) 44x44x56mm
Mass TBD
Power Requirement USB bus power or external 5VDC, 500mA
Power Consumption ~2.5 Watts
Operating Temperature 0°C to +50°C
Operating Humidity 5%-95%, Non-condensing
Interface Connector Locking mini USB cable & RJ45 GPI/O connector
Lens Mount Adjustable C-Mount (CS-Mount option)
Frame Buffer 1 frame buffer (optional expansion to 50 frames
|
|
|
|
|
|
Lumenera's monochrome USB 2.0 and Ethernet cameras are specifically designed for industrial, scientific and surveillance applications. Board-level and enclosed cameras are based on high-quality CMOS and CCD sensors. Unique product line features over 80 camera models, featuring:
- high dynamic range cameras
- megapixel intelligent IP camera models
- true day/night models
- I/O control for synchronization with strobe and peripheral devices
- selectable 8, 10 or 12-bit pixel data
- simplified cabling via USB2 and PoE
- variety of form factors and sensors available
Advanced camera functions are available through a comprehensive Software Developers Kit (SDK), with sample code and full technical support to quickly integrate camera functions into your application. Lumenera's superior Technical Assistance Centre is committed to fully supporting your vision needs.
Rely on Lumenera's custom and OEM cameras, that can be adapted to fit your application requirements whether simple or complex. Modifications range from small hardware and software adjustments such as private labeled enclosures, to complete made-to-spec solutions with alternate form-factors and unique mechanicals. Contact us in determining how we can assist with your next camera project.
Satisfy your application and industry-specific requirements with Lumenera's "easy to do business with" practices.
|
|
The new XC-ST Series of compact black and white camera modules offers high picture quality and excellent sensitivity. It incorporates the latest generation of CCD image sensors. The XC-ST70/CE features a 2/3-inch IT Hyper HAD CCD, the XC-ST50/CE and the XC-ST51/CE a 1/2-inch IT HAD CCD and the XC-ST30/CE a 1/3-inch IT HAD CCD.
The XC-ST Series is easy to operate, with all switch settings on the rear panel. Their flexible controls and compact size easily facilitate system integration. Excellent images of fast moving objects can be captured with the built-in electronic trigger shutter. The XC-ST Series is well suited for demanding applications in industry, microscopy and machine vision.
The recommended camera adapter for the XC-ST Series is the compact and lightweight DC-700/CE.
|
|
|
|
|
|
Lumenera's Lw230 High-Speed USB 2.0 Camera
This high-speed USB 2.0 camera provides 12 fps at 1616x1216 pixels. Based on a high-quality 1/1.8" CCD sensor with global shutter. Unique 2.0 megapixel image sensor provides higher dynamic range of 60dB during video capture. I/O control for synchronization with strobe and peripheral devices. Advanced camera functions are available through a comprehensive Software Developers Kit, with sample code and full technical support to quickly integrate camera functions into your application.
CAMERA SENSOR
Image Sensor 1/1.8" format, color or mono, 7.1mm x 5.4mm array
Effective Pixels 1616 x 1216, 4.40μm square pixels
Frame Rate 12 fps at 1616x1216
Sensitivity High
Dynamic Range 60dB
White Balance Auto / Manual
Dimensions (W x H x D) 2.00 x 2.50 x 1.63 inches
Mass ~150g / 300g
Power Requirement External 5VDC, 800mA (included)
Power Consumption ~4.0Watts
Operating Temperature 0° C to +50° C
Operating Humidity 5%-95%, Non-condensing
Interface Connector Standard USB 2.0
Lens Mount C-Mount (CS-Mount option)
Frame Buffer 1 frame buffer (optional expansion to 6 frames)
|
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is another example of customization and application-specific solution: a complete (image capture and analysis) analytical imaging sub-assembly used in an automated microbiological control equipment for the food industry.
|
|
The 5X80 decoder module combines a compact, lightweight optical module and decoder board to deliver an easy-to-integrate decoding subsystem that is ideal for most data capture applications.
The 5X80 utilizes the latest CMOS industrial grade image sensor technology, illumination, and optics partnered with advanced decoding software to read linear, stacked linear, and matrix bar codes. In addition, these imagers can read and decode OCR fonts and capture digital images.
Support for standard serial and USB interfaces eliminates the need for hardware modifications to existing platforms in most cases. The small size and low current draw of the devices allow the modules to be integrated with minimal mechanical modifications, and 100% solid-state industrial-grade technology enables 5X80 series engines to withstand 2,500G of shock and sub-zero temperatures.
|
|
|
|
|
|
Lumenera's LuX71 Single Board OEM Cameras
• Single board cameras with identical functionality of 2-board cameras
• Same physical mounting points
• 1, 2, or 3 megapixel sensor options(Lu171C, Lu171M, Lu271C, Lu371C)
• ½" format CMOS sensors
• C-mount, CS-mount, M-12 microlens mount options
• Mini-USB connector, or locking 4-pin Molex cable for tethered USB
and I/O cables
• Minimum quantity order may apply—contact us for more detail
As an OEM customer you can leverage the success of Lumenera’s line of high-performance USB 2.0 cameras.
Lumenera’s custom cameras can be adapted to fit your application requirements
whether simple or complex. Rely on Lumenera’s expertise for timely modifications, ranging from small hardware and software adjustments such as private labeled enclosures, to complete made to-spec solutions with alternate form-factors and unique mechanicals.
As a Lumenera OEM customer, leverage the success of our wide range of high performance USB 2.0 cameras and expect the following advantages:
• Improve time to market for megapixel cameras
• Reduce development costs/risks
• Differentiate from your competition
• Expertise in integrating peripheral components
Satisfy your application and industry-specific requirements with
Lumenera’s “easy to do business with”practices. Contact us in determining how we can assist with your next camera project.
|
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is one example of customization and application-specific solution:
a compact, high sensitivity linescan camera used in genomic instrumentation for the biotechnology industry.
|
|
|
|
|
|
Lumenera's LuX73 OEM Camera
• Slim 2-board camera design
• Identical performance and functionality of full sized cameras
• Tethered cable up to 15cmlength for variablemounting options
• 1, 2, or 3 megapixel sensor options (Lu173C, Lu173M, Lu273C, Lu373C)
• ½" format CMOS sensors
• No lensmount available (intended for integration into OEM enclosure design)
• Mini-USB connector, or locking 4-pin Molex cable for tethered USB and I/O cables
• CCD sensor options can bemade available—call for customization details
As an OEMcustomer you can leverage the success of Lumenera’s line of high-performance USB 2.0 cameras.
Lumenera’s custom cameras can be adapted to fit your application requirements
whether simple or complex. Rely on Lumenera’s expertise for timely modifications, ranging fromsmall hardware and software adjustments such as private labeled enclosures, to complete made-to-spec solutions with alternate form-factors and uniquemechanicals.
As a Lumenera OEM customer, leverage the success of ourwide range of high performance USB 2.0 cameras and expect the following advantages:
• Improve time to market for megapixel cameras
• Reduce development costs/risks
• Differentiate from your competition
• Expertise in integrating peripheral components
Satisfy your application and industry-specific requirements with Lumenera’s “easy to do business with”practices.
|
|
Ophir manufactures three main types of pyroelectric OEM heads:
Low profile pyro heads with no electronics with a BNC output to connect to the host electronics.
Low profile smart heads to be used with Ophir smart display.
Compact pyroelectric heads with built-in amplifiers and signal conditioners which put out a voltage proportional to energy
|
|
|
|
|
|
|
The Imaging Source - a multi-national manufacturer of industrial cameras - has just brought to market a new series of progressive scan, CMOS cameras, which ship with a USB 2.0 connector. The series of 12 different cameras includes color and monochrome models, with resolutions from 640x480 to 2048x1536. The cameras ship in robust industrial casing with a C/CS lens mount and optionally come with a fully integrated ring light system. The software support of the cameras leaves nothing to be desired: Both programmers and end-users immediately feel at home. Getting started with the cameras is a matter of minutes and integrating them into existing applications takes only a few lines of code. Drivers for LabView, Halcon, DirectX, Twain and WDM are included. All camera parameters and settings can be set via the shipped software. The cameras ship with drivers for Windows XP/Visa, the SDK IC Imaging Control and IC Capture. The latter is a powerful end-user application, which allows all cameras parameters to be set, live video to be displayed, singular images and image sequences to be captured.
|
|
Outstanding Benefits:
- Reads all standard 1D and 2D symbologies
- High 99% read rate performance
- Setup in under 20 minutes
- Lower cost of ownership
- Easy “plug-and-play” replacement
- No routine maintenance
|
|
GB-Series
- Ultra-compact size - (2"x3.5")
- Fast frame rates
- 16MB resend buffer
- Optional vertical connector orientation
- Light weight
- Gigabit Ethernet interface (GigE Vision)
- Snapshot shuttering
- Asynchronous external trigger and sync I/O
- Region of Interest Readout (AOI partial scan)
- Flexible binning modes
- Windows and Linux SDK
- Adjustable C-Mount (CS-Mount optional)
Description
The GB-Series Gigabit Ethernet CCD cameras are single-board versions of our popular GC-Series GigE Vision cameras. The credit card-sized GB-Series are high-performance, board-level machine vision cameras with Gigabit Ethernet interface (GigE Vision™).
|
|
|
|
|
|
|
Intelligent single board cameras for industrial applications from Vision Components are especially designed for OEM applications. Delivered without a housing, these cameras are suitable even for demanding tasks. Due to their highly compact dimensions (60 x 80 x 35 mm), they can be easily integrated into plants and machines. The new single board cameras VCBoardCam are available as color and black-and-white models. Both feature a 400 MHz processor from Texas Instruments which has a computing power of 3,200 MIPS. The VCBoardCam have a resolution of 1,024 x 768 and 640 x 480 pixels, respectively, recording 16 or 32 frames per second. The Smart Cameras come equipped with 4 MB Flash EPROM and 32 MB SDRAM for program and data storage. An Ethernet interface enables live video display on a PC and serves to integrate the camera into existing automation environments. Additionally, the cameras feature two digital inputs, four outputs and eight TTL I/Os. A high speed trigger input enables jitter-free image recording even at very high reading frequencies. Like all other Smart Cameras from Vision Components, the VCBoardCam are designed for use in rugged industrial environments and withstand vibrations and shocks.
|
|
|
|
|
|
PresencePLUS® Pro and P4
From simple verification to complex inspection, Banner has the most powerful and affordable vision systems and sensors, built to perform in high-speed manufacturing environments. Banner provides an alternative to costly, complex machine vision systems with easy-to-use and affordable self-contained vision sensors for real-world applications.
Select the PresencePLUS® Pro which incorporates remote cameras paired with powerful controller units featuring 11 location, vision and analysis tools. Or, choose the versatile new, self-contained PresencePLUS P4 OMNI with easy TEACH setup. To deploy the precise inspection capability where you need it, select from four PresencePLUS P4 series vision sensors with dedicated functionality.
Banner machine vision solutions are available in standard resolution and high-resolution 1.3 megapixel models for more detailed inspections, as well as sealed, IP68-rated models for rugged and washdown environments. P4 models are available in both in-line and right-angle configurations. These options, as well as a complete selection of Banner lenses, lighting and brackets, provide complete, high-speed inspection capabilities in the vast majority of applications.
|
|
If you have a clear, straightforward vision application or if you need a vision sensor to perform colour or linescan inspection then our DVT products are probably the right solution for you.
DVT vision sensors are a family of low cost, versatile and easy to use vision sensors for inspection, quality control and automation. Thousands of customers worldwide across a range of industries use DVT systems to improve product quality and minimize rejects.
With our range of DVT products, you choose your vision hardware and software configuration to create the perfect tailored solution to match your production requirements.
|
|
Smart Camera
LORD's CIL2048 smart camera is a compact all-in-one vision device. It integrates a linescan camera and complete image processing capabilities into a single housing. The CIL2048 smart linescan camera is quickly and easily set up through straightforward commands to perform all common operations of linear vision for you. What comes out from the CIL is not any sort of video signal but the required measurement or decision information, directly.
|
|
IVC-2D - Smart Camera solutions for factory automation
Every day SICK sensor solutions simplify production for thousands of com- panies around the globe. Our industrial vision camera, the IVC-2D, brings
a new level of sensor intelligence to flexible automation solutions.
From now on the IVC-2D camera can not only check geometries, but also simultaneously detect and read figures, letters and bar codes, e.g. sell-by dates for food or batch numbers on pharmaceutical packages.
The camera system thus becomes a complete solution for inspecting packaging and its printing at the same time.
With many inspection tools, powerful configuration software and dedicated support engineers SICK IVP is your partner of choice for vision. Performance and intelligence in a robust industrial package.
|
|
|
Lumenera’s NEW Intelligent cameras greatly enhance the ability to detect potential threats and events in real-time, and provide the opportunity for security personnel to interrupt a crime or attack while in progress. Enabled with ObjectVideo video analytics, Lumenera's Li045. Li165 adn Li175 network cameras provide automated detection of the most intimate, predefined events, such as a person entering a restricted zone, or a suspicious object left unattended in a public area. Ultra-wide dynamic range (+120dB) in the Li045 provides high quality, progressive scan images in high contrast environments. These cameras deliver outstanding picture quality and performance. Adjustable H.264 and MJPEG compressed still-images or live streaming video, are provided across a standard 10/100BaseT network interface. True day/night modules available.
|
|
|
|
|
|
This makes it possible to process the image directly in the camera, or to preprocess it before transmission. Crisp, clear monochrome images captured by the advanced 1/2-type IT CCD sensor at SXGA resolution can be processed at 15 fps (34 fps at VGA resolution). Camera functions including gain control, partial scan, binning and gamma control can also be controlled via the same PC.
Sony introduces a new addition to its machine vision camera lineup, the all-in-one XCI-SX1 Intelligent Camera. This camera is equipped with a 1/2-type high resolution (1280 x 1024) progressive scan CCD, an embedded CPU and a 10Base-T/100Base-TX interface for network connectivity.
Incorporating the high-performance and flexible AMD Geode™ GX533 processor with a fully customisable Windows© or Linux® operating system, the XCI-SX1 camera is designed to allow integrators to install a variety of image-processing software applications or to develop and apply customised applications to meet specific user needs. Unlike conventional machine vision cameras, images captured by the XCI-SX1 are processed within the camera and the processed-data is directly transmitted to a PC over a network, RS-232C link or Digital I/Os. The XCI-SX1 camera eliminates the need for conventional image-processing systems and allows for simple setup and efficient factory workflow. for a wide range of machine vision applications such as object recognition, inspection, measurement, alignment and more.
With its high-performance, flexible integration and versatile interfaces, the durably-designed XCI-SX1 Intelligent Camera is ideal.
|
|
IVC-2D smart camera:
now also with OCR and OCV
- Stand-alone
- With wide-ranging image processing library
- With PC software: IVC Studio
- Camera and accessories from a single source
- Robust, simple handling
For packaging, the food and semi-luxuries industry,
handling and warehousing systems, logistics,
pharmaceuticals, automotive, robotics
|
|
|
|
|
|
|
Vision components introduces the VCProfessional family, a current developed series of intelligent cameras suited even for highly demanding applications. The compact devices are freely programmable stand-alone image processing systems which can be integrated into almost any industrial facility. As all image recognition and processing functions are provided by the camera, no auxiliary PCs are necessary. The new Smart camera models are based on the tried and tested VC standard series and come equipped with technical enhancements: they feature both an RS232 and an Ethernet interface as well as high-performance Texas Instruments processors (400 MHz, 3,200 MIPS). With 32 MB RAM and 4 MB flash EPROM, the cameras have twice the memory capacity of their predecessor models. Additional storage memory is provided by a 128 MB SD card. Proven features, such as the cameras' VGA monitor output or their four digital inputs and outputs remain unchanged. Thanks to the real time operating system VCRT, the devices are able to multitask. Furthermore, they have a high speed trigger input that enables jitter-free image recording even at very high reading frequencies. Six different VCProfessional Smart Camera models are now on the market. Resistant to vibrations and shocks, all VC cameras are suitable for use in rugged industrial environments.
|
|
|
|
