|
|
The FASTCAM 1024 PCI is the world's first PC based mega pixel @ 1,000 fps camera is perfect for high speed PIV and DIC applications.
Utilizing the same super sensitive CMOS sensor used in the Emmy award TM winning ultima APX and ultima APX-RS cameras, the 1024 PCI offers true 10 bit images all the way to a top speed in excess of 100,000 fps.
The compact camera head is ideal for use in tricky to locate or hazardous locations and is supplied with both C and F-mount lens adaptors. A single flexible cable sixteen feet (5 meters) long connects the camera head to the PCI card which resides in either a standard desktop PC or more portable PCI cradle connected to a laptop.
Several different memory options are available; all fitting snugly against the card to ensure never more than a single PCI slot is required per camera system. Current options include:
Standard 2 Gigabyte (GB) for 1.54 second record time at 1,000 fps.
Enhanced 6GB for 4.61 seconds at 1,000 fps.
Expanded 12GB for 9.22 seconds at 1,000 fps (available Q1 2005)
Maximum 24GB for 18.44 seconds at 1,000 fps (available Q1 2005)
Despite the compact packaging, the 1024 PCI offers amazing bang for the buck with many of the features normally only available with much more costly systems, such as memory partitioning, variable speed/aspect ratios, over exposure protection, etc.
Contact Photron to schedule a demonstration of this powerful new slow motion analysis tool. |
|
Features:
Full, 1,024 by 1,024 pixel resolution, up to 2,000 frames per second (fps)
10-bit monochrome, 30-bit color CMOS sensor with large pixels for increased sensitivity
Recording at frame rates up to 100,000 fps
Global electronic shutter to 4µs
Memory segment feature - enables 64 different recordings to be made in one session
IRIG or GPS timing is recorded in real time on every frame - not appended later
Lightweight tethered camera head enables easy access to hazardous or hard to reach locations
Camera can be controlled via Photron Gigabit Optical Network, Ethernet, FireWire and Keypad
Image memory can be expanded to 8 Gigabytes to facilitate 3 second record duration at maximum resolution and 2,000 fps or 6 seconds at 1,000 fps |
|
Features:
Full, 1,024 by 1,024 pixel resolution, up to 3,000 fps, 512 by 512 pixels at 10,000 fps
10-bit monochrome, 30-bit color CMOS sensor with large pixels for unsurpassed sensitivity
Short inter-frame time makes the APX-RS ideal for PIV and DIC applications
Top recording speed is 250,000 fps - an industry record
Global electronic shutter to 2µs
Memory segment feature - enables 64 different recordings to be made in one session
IRIG or GPS timing is recorded in real time on every frame - not appended later
Solid Single piece design for easier handling and use in hostile environments
Image memory can be expanded to facilitate 6 second recordings at 1,000 fps |
|
Features:
Full 512 x 512 pixel resolution up to 2,000 frames per second (fps)
10-bit monochrome, 30-bit color CMOS sensor with large 16 µm pixels for increased sensitivity
Recording at frame rates up to 32,000 fps
Global electronic shutter to 4µs
Memory segment feature - enables 64 different recordings to be made in one session
IRIG or GPS timing is recorded in real time on every frame - not appended later
Lightweight tethered camera head enables easy access to hazardous or hard to reach locations
Camera can be controlled via Photron Gigabit Optical Network, Ethernet, FireWire and Keypad
Image memory can be expanded to facilitate 3 second record duration at maximum resolution at all speeds for 2,000 fps and faster, and 6 seconds at 1,000 fps
Dual Speed Recording mode allows the frame rate to be changed "on the fly" during a recording |
|
| The APX-i2 brings the many benefits of an intensified head to the ultima APX. Providing true mega pixel resolution (1,048,576 ten bit pixels per frame) to 2,000 frames per second (fps) and with gating down to twenty nanoseconds, the intensified head is swappable with either the monochrome or color camera heads on any existing ultima APX system; meaning one APX processor can support ALL three different camera heads without needing retuning or modification. Another real nice feature of the ultima APX-i2 is the ability to offset sequential frames by as little as one nanosecond. This enables cyclical events, such as inkjet printer operation to be recorded with one image per cycle, and as little time as a single nanosecond between frames to give an apparent equivalent framing rate of 1,000,000,000 fps at mega pixel resolution! For applications requiring a fast and truly cyclical framing rate, the APX-i2 retains the APX's ability to operate as fast as 120,000 fps and preserves all the features that have made the ultima APX the best selling mega-pixel camera in the world. |
|
The new XC-ST Series of compact black and white camera modules offers high picture quality and excellent sensitivity. It incorporates the latest generation of CCD image sensors. The XC-ST70/CE features a 2/3-inch IT Hyper HAD CCD, the XC-ST50/CE and the XC-ST51/CE a 1/2-inch IT HAD CCD and the XC-ST30/CE a 1/3-inch IT HAD CCD.
The XC-ST Series is easy to operate, with all switch settings on the rear panel. Their flexible controls and compact size easily facilitate system integration. Excellent images of fast moving objects can be captured with the built-in electronic trigger shutter. The XC-ST Series is well suited for demanding applications in industry, microscopy and machine vision.
The recommended camera adapter for the XC-ST Series is the compact and lightweight DC-700/CE. |
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is another example of customization and application-specific solution: a complete (image capture and analysis) analytical imaging sub-assembly used in an automated microbiological control equipment for the food industry. |
|
OEM Solutions
When it comes to integrating vision or optical measurement capabilities into one's original equipment, picking separate components on the sole consideration of their state-of-the-art specifications doesn't make it right every time. When it makes it. What is of utmost importance, rather, is the supplier's skills in sorting out the very requirements that govern the final system performance and customizing the right solution for the right cost.
We specializes in supplying industry OEMs with specific solutions that exactly meet their exact vision or optical application requirements.
Here is one example of customization and application-specific solution:
a compact, high sensitivity linescan camera used in genomic instrumentation for the biotechnology industry. |
|
Smart Camera
LORD's CIL2048 smart camera is a compact all-in-one vision device. It integrates a linescan camera and complete image processing capabilities into a single housing. The CIL2048 smart linescan camera is quickly and easily set up through straightforward commands to perform all common operations of linear vision for you. What comes out from the CIL is not any sort of video signal but the required measurement or decision information, directly. |
|
IVC-2D smart camera:
now also with OCR and OCV
- Stand-alone
- With wide-ranging image processing library
- With PC software: IVC Studio
- Camera and accessories from a single source
- Robust, simple handling
For packaging, the food and semi-luxuries industry,
handling and warehousing systems, logistics,
pharmaceuticals, automotive, robotics |
|
Radiation Tolerant Thru-Wall/Roof Viewing System :
The IST Through-Wall/Roof Camera (Endoscope) Optical Inspection System is designed for viewing through the shielding wall of nuclear facilities such as a "hot cell". The endoscope relays a view of the inside of a cell to a CCD camera on the cold side of the wall. |
|
| The camera, equipped with a CMOS sensor, rather than the better known CCD type, with a 1.3 million pixel resolution and 24 bit colour depth. The motorised version has a stepping motor for sideways movements. Fitted with Xenon bulbs, having minimum intensity variation and a 6X or 10X motorised zoom, depending on the version selected. |
|
SILICON VIDEO 1310C is a 10-bit Bayer Pattern color camera system with the advantages of high resolution progressive scan image capture, low noise digital signaling, convenient software control, the availability of extensive processing, measurement, and analysis capabilities, and low cost. XCAP software provides control of all camera operations.
SENSOR BY KODAK - SILICON VIDEO 1310C camera is based on the KAC-1310 CMOS sensor from Eastman Kodak Company. This progressive scan sensor offers continuous and single frame rolling shutter modes, windowing, sub-sampling, anti-blooming, 10 bit dynamic range, and an active programmable array resolution of 1280 x 1024 pixels. Visit the Kodak web site for detailed sensor specifications.
SILICON VIDEO ® 1310C Camera Head
Infrared Cut Filter
Data, Communication & Power Cable
PIXCI ® D2X1 Digital Frame Grabber
XCAP-Lite Imaging Program
1280 x 1024 10-bit capture @ 14.5 fps
Sequence Capture (XCAP-Ltd or Std)
Triggered Sequence Capture
132 MB/s Burst Transfers
Camera Integration and Reset Control
PCI Bus: 32 or 64 bit, 3.3 or 5 volt
Win XP/2K/NT/ME/98/95 & LINUX |
|
pixelfly qe
This high performance digital 12bit CCD camera system features state of the art in CCD and electronics technology. The pixelfly qe has an extraordinary quantum efficiency with up to 65%. The system consists of an ultra compact camera head, which either connects to a standard PCI or a compact PCI board via a high speed serial data link. The available exposure times range from 5µs to 65s. A digital temperature compensation is integrated instead of a space consuming thermo-electrical cooling unit. All camera functions can be remotely accessed and controlled via digital interface. This compact digital CCD camera system is perfectly suited for many scientific and industrial imaging applications, like microscopy, spectroscopy and quality control. |
|
pco.1200 s
This high speed 10bit CMOS camera system comprises advanced CMOS and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 820MB/s. The system features an excellent resolution (1280 x 1024pixel) and low noise. It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 1µs to 5s. This digital CMOS camera system is perfectly suited for high speed camera applications such as material testing, external crash testing or super slow motion movie clips.
|
|
pco.2000
This high resolution 14bit CCD cooled camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 160MB/s. The system features thermo-electrical cooling (delta vs. ambient -50°C), a superior high resolution (2048 x 2048pixel) and low noise (down to 10e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days (500ns opt.).This digital CCD camera system is perfectly suited for low light camera and piv camera applications. |
|
Versatility at the highest level
If you have demanding image processing tasks to perform, you rely on digital cameras with outstanding image quality. The TX camera family from Baumer provides just such quality. This family includes both monochrome and color cameras with resolutions up to 5 megapixels. The extensive range of models for Gigabit Ethernet and FireWire satisfies almost every wish. Versatile camera functions and the conformity to industrial standards, such as GenIcam and GigE Vision, making an integration of the TX cameras into individual applications as easy as possible. Next to that the very compact housing size allows Baumer digital cameras to work also in narrowest fitting areas.
Gigabit Ethernet really can be that simple!
Just unwrap and go...
With the "Starter Kit for Baumer Gigabit Ethernet Cameras," we provide our customers an all-in-one package which enables you to evaluate the camera in your application right away. Besides the package contains of following components: Gigabit Ethernet PCI interface board, network cable, trigger flash cable, power supply, mounting adapter, driver and the Baumer-GAPI. The last item is our Software Development Kit (SDK) and ensures the easy, reliable operation of all Baumer cameras. The Baumer-GAPI Viewer serves as the test interface - just install it, switch on the camera and start using it!
|
|
sensicam em
The new generation of electron multiplication (emCCD) CCD sensors is integrated into the proven sensicam camera system. With this on-chip multiplication of the light signal the readout noise of the camera can be neglected ( 50). With its excellent resolution of 1004x1002pixel this high performance cooled digital 12 bit CCD camera system is best suited for extremely low light camera applications. The system features thermo-electrical cooling of the image sensor (delta of -45°C vs. ambient temperature) and an outstanding quantum efficiency (up to 65%) achieving a high spectral sensitivity in general and especially in the NIR. Exposure time modes (software selectable) range from 75 µs - 1h. A high speed serial data link connects the system to the PC (fiber optic link available). This low light emCCD camera system is perfectly suited for scientific imaging (e.g. microscopy, bio marker and label imaging) and for night vision applications. |
|
pco.1300 oem
This versatile high performance 12 bit CCD camera system is specifically designed for OEM applications. The pco.1300 oem has an extraordinary quantum efficiency of up to 65 %. At the heart of the camera is an FPGA processor allowing for sophisticated control and accurate timing of the CCD and associated electronics. In addition, a proprietary offset control algorithm has been developed which provides very high offset stability, regardless of ambient temperature or signal changes ensuring accurate and repeatable quantitative data over long periods of time. The pco.1300 oem’s most unique feature is its flexibility for customization to fit any OEM user application. ROI, binning, cooling, as well as other features of the camera can be selected and optimized to accommodate the user's application. Camera features excellent resolution (1392 x 1040 pixel), 12 bit dynamic range, exposure time 5 µs to 1 hour, internal frame buffer for continuous image capture (64 MB min), excellent low noise of 8 eŻ rms @ 10 MHz, selectable regulated cooling to -30 şC vs. ambient, standard interface IEEE1394a, optimal offset stability and control (< 1 count). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as biochip reading, fluorescence imaging, confocal & light microscopy etc.. |
|
sensicam uv
This UV sensitive cooled digital 12bit camera system comprises advanced CCD and elctronics technology. With this on-chip multiplication of the light signal the readout noise of the camera can be neglected ( 50). With its excellent resolution of 1004x1002pixel this high performance cooled digital 12 bit CCD camera system is best suited for extremely low light camera applications. The system features thermo-electrical cooling of the image sensor down to -12°C and an outstanding quantum efficiency in the UV range of the spectrum (QE 15% @254nm and 10% @193nm). Exposure time modes (software selectable) range from 75 µs - 1h. A high speed serial data link connects the system to the PC (fiber optic link available). This low light UV camera system is perfectly suited for scientific imaging (e.g. metrology, semiconductor quality control, nano particle measurements and bio label imaging) applications. |
|
Baumer TX family expands with new 5-megapixel color cameras
The Baumer family of TX cameras has grown. The three new 5-megapixel color cameras are available with a Gigabit Ethernet or FireWire IEEE1394b interface and are distinguished by excellent image quality. The large dynamic range, the image homogeneity and the very good linearity between the incident light and the digital signal are just a few of the significant performance features of these cameras. The innovative industrial cameras were specially designed for automated image processing and may be used in various areas such as mechanical engineering, pharmaceutical, medical and measuring technology.
The 5-megapixel digital cameras supply up to 15 complete images per second and have the same compact housing as all Baumer TX cameras. All cable connections are standardized and threaded, making for a secure connection. The cameras have been tested according to the EMVA 1288 Standard and have UL certification for the US market. The new cameras comply with the GigE Vision and GenCam or FireWire IEEE 1394b standard. All Baumer cameras can be simply integrated into an image processing software by means of the generic programming interface Baumer-GAPI - available for Windows and Linux.
|
|
Baumer Starter Kit - Just Unwrap and Go...
Your fast and easy access to the Gigabit Ethernet technology.
Evaluating a new camera should be as simple as snapping your fingers. This is the idea behind the Baumer Starter Kit being offered for our multifaceted models of Gigabit Ethernet cameras (VGA up to 5 megapixels). No longer will you need to spend all your time searching for all necessary cables and connectors to get the camera running. With the Baumer Starter Kit you receive an all-in-one package for a effortless evaluation in your application.
In addition to a Baumer Gigabit Ethernet camera of your choice and the associated Software Development Kit (SDK) for Windows, the Baumer Starter Kit contains a Gigabit Ethernet PCI interface board, a Gigabit Ethernet cable (4.5 m), a trigger flash cable (5.0 m), a power supply with 3.5 m cable, a front mounting adapter and a tripod mounting adapter. Also experienced users benefit from this composition.
The SDK associated with the Starter Kit was developed by Baumer for the best possible integration and is especially suitable for the requirements of Baumer cameras. Our customer support is available for further, competent assistance. You receive "everything from a single source" made by Baumer - exploit the advantages.
|
|
1.4 megapixel digital camera with 30 full frames
The new Baumer TXG14-fast digital camera is built for speed and supplies up to 30 full frames per second. This 1.4 megapixel Gigabit Ethernet camera was specially designed for fast processes that also require high resolution. Typical applications are in the packaging industry, for handling systems such as pick-and-place robots and in measuring technology.
Fast processes demand short and constant processing times within the camera. The TXG14-fast has a very short delay time between the trigger and the beginning of the flash and a fine setting of the exposure time in microsecond steps. These properties provide uniform brightness which is necessary for gray-scale analysis. With this new camera, Baumer fulfills the high quality demands of fast processes.
The camera has been tested according to the EMVA 1288 standard and has UL certification for the US market. It supports the GigE Vision and GenCam standards. All Baumer cameras can be simply integrated into an image processing software by means of the generic programming interface Baumer-GAPI - available for Windows and Linux.
|
|
Small, flexible and innovative:
The new Baumer Gigabit Ethernet cameras of the TX series
With the new Gigabit Ethernet cameras of the TXG series, Baumer has set a milestone which will determine further developments in this field. With data transfer rates of up to 1000 Mbit/sec and cable length of up to 100 meters, GigE surpasses previous technologies such as FireWire and USB. These newly presented cameras are suitable for use in the most diverse environments. The range of functions, the remarkably small and rugged design as well as low power consumption make this camera series suitable for most industrial applications. With the new TXG series 13 Gigabit Ethernet camera models with resolutions from VGA to 5 megapixel in monochrome and color versions are available to the user. Naturally, all TXG cameras convince with the excellent Baumer image quality. These cameras with their conformity to GigE Vision, are 'plug and play' with the supplied driver software as well as with established image processing solutions. The newly-developed generic programming interface Baumer-GAPI, bridges the gap to individual software packages. With this interface, all Baumer FireWire and Gigabit Ethernet cameras can be controlled on one PC, using the same software, regardless of interface.
|
|
pco.1600
This high dynamic 14bit cooled CCD camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 160MB/s. The system features thermo-electrical cooling (delta vs. ambient -50°C), a superior high resolution (1600 x 1200pixel) and low noise (down to 12e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days (500ns opt.). This digital CCD camera system is perfectly suited for low light camera applications like fluorescence imaging and microscopy.
|
|
pco.4000
This high resolution 14bit cooled CCD camera system comprises advanced CCD and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 128MB/s. The system features thermo-electrical cooling (delta vs. ambient -45°C), a superior high resolution (4008 x 2672pixel) and low noise (down to 12e- rms). It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 5µs to 49days. This cooled digital CCD camera system is perfectly suited for low light and high resolution camera applications, like microscopy, aerial photography or quality control.
|
|
pco.1300 solar
This versatile high performance 12 bit CCD camera system is specifically designed for electro luminescence (EL) applications in the range of 850nm - 1200nm. The pco.1300 oem has an extraordinary quantum efficiency of up to 11 % @ 900nm. At the heart of the camera is an FPGA processor allowing for sophisticated control and accurate timing of the CCD and associated electronics. In addition, a proprietary offset control algorithm has been developed which provides very high offset stability, regardless of ambient temperature or signal changes ensuring accurate and repeatable quantitative data over long periods of time. The pco.1300 solar’s most unique feature is its increased sensitivity in the NIR range of the spectrum. ROI, binning, cooling, as well as other features of the camera can be selected and optimized to accommodate the user's application. Camera features excellent resolution (1392 x 1040 pixel), 12 bit dynamic range, exposure time 5 µs to 1 hour, internal frame buffer for continuous image capture (64 MB min), excellent low noise of 7 eŻ rms @ 10 MHz, selectable regulated cooling to 5 şC, standard interface IEEE1394a, optimal offset stability and control (< 1 count). This low light camera system is perfectly suited for many sensitive and low noise imaging applications, such as solar cell quality control, NIR fluorescence imaging, EL applications etc.. |
|
pco.1200 hs
This high speed 10bit CMOS camera system comprises advanced CMOS and electronics technology. With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 1GB/s. The system features an excellent resolution (1280 x 1024pixel) and low noise. It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 1µs(50ns optional) to 5s. This digital CMOS camera system is perfectly suited for high speed camera applications such as material testing, external crash testing or super slow motion movie clips.
|
|
pco.inspector highspeed
This high speed 10bit CMOS camera inspection system comprises advanced CMOS and electronics technology. It is packed together with an excellent Tablet PC LM1600 into a case with batteries and tripod. Therefore, the inspection system can be used anywhere operated for more than 2 hours by its own batteries.
With the new approach to integrate the image memory (camRAM) into the camera itself, it enables unmatched fast image recording with 1GB/s. The system features an excellent resolution (1280 x 1024pixel) and low noise. It consists of a compact camera with an external intelligent power supply. The image data are transferred via customer selectable standard data interfaces to a computer (IEEE 1394 (“firewire”), camera link). The available exposure times range from 1µs (50ns optional) to 5s. This digital CMOS camera system is perfectly suited for high speed inspection applications such as production line fault detection and motion analysis. |
|
|
