|
|
|
|
|
|
|
The MICRO III, with its small dimensions of only 4,7 x 8,8 x 2,5 cm, is the ideal gas detector for personal protection. It weighs only 70 g, but yet offers the loudest alarm in its class (95dB). Easily placed into the shirt pocket or put on the belt you get the sixth sense for gas hazards for more than 5000 hours on a single battery (AA). The MICRO III uses the Smart-sensor technology, which means that if your detection requirement changes, the MICRO III can be easily adapted to the new measurement task by pre-calibrated, user replaceable sensors. The MICRO III is available for the following gases: oxygen, hydrogen sulfide, carbon monoxide, sulfur dioxide, nitrogen monoxide, nitrogen dioxide, chlorine, chlorine dioxide, hydrogen chloride, hydrogen cyanide, ammonia, ethylene oxide, phosphine, silan, phosgene, hydrogen and ozone. For gas sampling an optional pump, which has its own power supply, can be attached to the detector. The durablitly, ease of use, and low maintenance of the MICRO III is an investment for many years.
|
|
Monoxor® III
The Monoxor III offers service technicians the easiest and most affordable way to locate CO in ambient air as well as stack gases.
Bacharach's Monoxor III is a continuous sampling instrument that quickly and accurately measures levels of CO between 0 and 2,000 ppm. In addition, the Monoxor III is supplied with a stainless steel probe and five feet of tubing to sample CO found in flue gases of residential furnaces, combustion appliances, commercial and industrial boilers.
An optional wireless IrDA printer provides a permanent record of the detected CO level.
|
|
CO Check is the convenient, dependable way to detect and measure dangerous carbon monoxide (CO) in both residential and commercial/industrial applications.
The instrument combines superior accuracy and reliability with simple, one-hand operation. Intuitive "stoplight" LEDs and an audible alarm alert you to the danger level of CO present, while the large easy-to-read LCD provides a precise readout of the exact CO level. A protective holster case with belt clip adds to your convenience.
CO Check is a natural companion for GAS-Mate combustible gas leak detector, since both enhance heating system safety. For accurate, reliable CO detection in a convenient, affordable package that has all the features you need, CO Check is the tool for you.
|
|
Features:
- Measures ambient CO and ambient CO2.
- Datalogs up to 255 records with variable sampling time from 1-10 minutes.
- Records time and date.
- Prints to optional printer using infra-red emitter.
- User adjustable alarms for CO and CO2.
- Long life Ni Mh batteries changed in situ with charger.
- Internal pump for fast measurements in room air or ducts.
- Long sampling hose for 'silent' sampling of high profile / public areas. Complete with SGAFP probe, spare spigot, fast charger, manual and carry cas
|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and sensors available.
GfG offers an extensive range of portable monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and sensors available.
GfG offers an extensive range of portable monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
The Tocsin 900 provides ultimate system flexibility for larger gas detection systems up to 255 detectors in size. The Tocsin 900 control panel is compatible with the Tocsin 102A and 103A range of Toxic, Flammable and Oxygen detectors. To compliment the system a range of accessories, calibration sets and audio visual alarms and addressable outputs are available. Full control through the system software is available to group, zone or vote detectors. Detectors can be calibrated and interrogated from the control panel. Assign tags to sensors and set rising, falling, latching or non-latching alarms. Eight RS485 ports allow configuration of eight single ended cable runs of up to 32 sensors or four double ended loops for greater cabling integrity.
Features
24V DC or 110/230V AC Options
Control up to 255 detectors
Digital Addressable Detectors
User configurable alarms
Add extra alarm relay outputs
RS485 I/O
On Board event logging
Download event memory and panel set up to PC
|
|
The Tocsin 900 provides ultimate system flexibility for larger gas detection systems up to 255 detectors in size. The Tocsin 900 control panel is compatible with the Tocsin 102A and 103A range of Toxic, Flammable and Oxygen detectors. To compliment the system a range of accessories, calibration sets and audio visual alarms and addressable outputs are available. Full control through the system software is available to group, zone or vote detectors. Detectors can be calibrated and interrogated from the control panel. Assign tags to sensors and set rising, falling, latching or non-latching alarms. Eight RS485 ports allow configuration of eight single ended cable runs of up to 32 sensors or four double ended loops for greater cabling integrity.
Features
24V DC or 110/230V AC Options
Control up to 255 detectors
Digital Addressable Detectors
User configurable alarms
Add extra alarm relay outputs
RS485 I/O
On Board event logging
Download event memory and panel set up to PC
|
|
Alphasense Carbon Monoxide sensors operate using well-known fuel cell technology. The CO-BF contains a chemical filter to remove cross-interferants such as SOx, NOx and H2S. The Alphasense CO-B series offers our leak-free guarantee and good, reliable detection performance. The leakproof housing is moulded in colour coded plastic for ease of identification.
Our unique ATAV test and validation system enables us to perform customised testing to customer requirements, eg we can test 100% of all our CO-BF sensors for hydrogen response. A record of each sensor's performance is stored in our database, accessible via the sensor barcode. This can provide hard copy evidence if required and serve as a powerful diagnostic tool.
|
|
|
|
|
|
Figaro's carbon monoxide sensor TGS5042 is a battery operable electrochemical sensor which offers several advantages over traditional electrochemical sensors: its electrolyte is environmentally friendly, it poses no risk of electrolyte leakage, it does not consume active materials or its electrodes during operation, and it has lower sensitivity to interference gases. With long life, good long term stability, and high accuracy, this sensor is an ideal choice for CO detectors with digital display. OEM customers will find individual sensor data printed in bar code form on each sensor, allowing individual sensor tracking and enabling users to skip costly gas calibration. Utilizes a standard AA battery-sized package.
Features:
* Battery operable
* High repeatability/ selectivity to carbon monoxide
* Reduced influence by various interference gases
* Long life
* UL recognized component
* simple calibration
* no sensor aging necessary
* meets UL2034 and EN50291
* meets RoHS requirements
Applications:
* Residential and commercial CO detectors
* CO monitors for industrial applications
* Ventilation control for indoor parking garages and attic
* Recreational vehicle CO detectors
* Marine boat CO detectors
* Fire detection
|
|
Cross sensitivity to H2, > 4%
Sensitivity nA/ppm in 400ppm CO 55 to 85
Response time t90 (s) from zero to 800ppm CO < 45
Zero current ppm equivalent in zero air < ± 2
Resolution RMS noise (ppm equivalent) < 1
Range ppm CO limit of performance warranty 2,000
Linearity ppm error at full scale, linear at zero and 800ppm CO < ± 40
Overgas range maximum ppm for stable response to gas pulse 4,000
|
|
Alphasense Carbon Monoxide miniature sensors operate using well-known fuel cell technology. The Alphasense CO-D series offers our unique leak-free guarantee and superior detection performance all in a diameter of 14.5mm. Only its size is reduced, not its performance or guaranteed life. The leak proof housing is colour coded for ease of identification.
Our unique ATAV test and validation system enables us to perform customised testing to customer requirements. A record of each sensor's performance is stored in our database, accessible via the sensor barcode. This can provide hard copy evidence if required and serve as a powerful diagnostic tool.
|
|
TGS 3870 is Figaro's new metal oxide semiconductor gas sensor for the detection of both methane and carbon monoxide. Using a micro-bead gas sensing structure, both methane and carbon monoxide can be detected with a single sensor element by periodic application of two different heater voltages (high and low). Miniaturization of the gas sensing bead results in a heater power consumption of only 38mW (average).
TGS 3870 has low sensitivity to alcohol vapors (a typical interference gas in the residential environment) and has high durability, making the sensor ideal for consumer market gas alarms.
|
|
| ... products without technical information |
| |
|
|
|
|
The F2000IAQ-CO 60xx/80xx series monitor and controller is used to monitor and control room CO level, as well as room temperature with optional relative humidity detection and display. Other options for additional outputs can be provided with RS485 communication, up to 3 dry relay contact and analog outputs.
The F2000IAQ-CO-60xx/80xx can be used as a programmable logical controller to control CO level, temperature or humidity and also as a transmitter to other device, DDC/PLC controller or other automatic system. It provides RS485 communication interface with independent address to PC or other control system.
Features:
- Real time detecting and display CO level with range from 0 to 1,000ppm.
- LCD can display CO, temperature and optional humidity at the same time.
- Preset the 1st and 2nd alarm set points for CO level.
- Providing one 0-10V analog output or up to two dry contact relay outputs.
- Analog output with two alternatives; linearised over full range output or PID control output.
- Semiconductor sensor technology with long lifetime..
- Multiple functions and high performance with low price..
- Optional RS485-communication interface, 15 KV antistatic protection, independent address setup to connect to PC or other system.
|
|
CMS-2 Carbon Monoxide Monitor/Alarm
The CMS-2 is a field portable carbon monoxide monitor and alarm for respirator air supply. If CO exceeds 10 ppm, it triggers a warning light, and a high-decibel audible alarm. The rugged case with comfortable carrying handle, protects the monitor from minor impacts. Used by blasting and painting contractors for field operations.
Available Literature:
23248 - CMS 1 & 2 Carbon Monoxide Alarms
|
|
|
|
|
|
The Tocsin 103 series of gas detectors are designed for cost effective safe area gas detection solutions. They incorporate micro processor technology to give a stable 4-20mA process signal output or digital addressable output. The addressable output option allows detectors to be networked on a single cable run giving dramatic reduction in installation costs. The in built processor can be used to pre-calibrate the sensor prior to installation. Alternatively calibration can be achieved on site via the Oliver IGD control panel or locally using a handheld PC device or laptop. A range of sensing technologies can be incorporated into the housing to provide the most appropriate detection method.
ATEX VERSIONS (TOCSIN 102) AVAILABLE
Available sensor types include
IGD’s own MKIII and Type B Pellistors,
Infra Red
Electrochemical Devices
Gas Detected Include
Flammable Gases
Carbon Dioxide
Carbon Monoxide
Nitric Oxide
Nitrogen Dioxide
Hydrogen Cyanide
Chlorine
Hydrogen Sulphide
Ammonia
Oxygen
Sulphur Dioxide
Hydrogen Chloride
ATEX VERSIONS ALSO AVAILABLE
|
|
D-G 102 PM Measuring System for CO
The CO-measuring system was developed according EU regulations for controlling the concentration of the limit values of carbon monoxide (CO) and nitrogen (NO) if applicable.
The warning-system can be connected to the tunnel DCS.
|
|
|
|
|
|
Series 9000 cross stack infrared, in-situ carbon monoxide monitors provide high accuracy and reliability, coupled with straightforward installation and setup and is suitable for a wide range of industrial combustion efficiency monitoring applications. This carbon monoxide monitor is designed to provide the operator with a fast response measurement, essential to the efficient combustion control of any boiler system.
Product Range:
Model 9100 Carbon Monoxide Monitor
Model 9200 MkII High Performance Carbon Monoxide Monitor
Features and Benefits:
Direct continuous measurement of Carbon Monoxide
True representative measurement - reading averaged across entire duct
Improved combustion control and efficiency savings
Low running and maintenance cost
High reliability - robust design
Simple installation - advanced alignment features
Over 20 years of experience in carbon monoxide monitoring - 4th generation product
The 9200 MkII has all the facilities of the 9100 with the addition of:
Clear stack, open path gas calibration
Automatic cell leak detection
4 gas cell, TUV approved measurement technique
Automatic duct pressure correction
|
|
| ... products without technical information |
| |
MA Series
Effective product protection is very important to the food, medical and chemical industries, ensuring the safety and quality that are demanded manufactures and consumers. Yamato can respond to these demands with an increased ability to inspect a variety of products. This reliability backed by our ISO9001 quality control system.
High Sensitivity
Minimum φ0.3mm (Fe) and φ0.6mm (SUS 304) are detectable.
Easy to Use
Various settings can be performed through interactive processing, supported by character display (LDC) of indicator.
Automatic Sensitivity Setting of 200 Products
Trial application of actual product through the conveyor before operation allows the detector to capture each product¨s characteristics and then to automatically set the detection sensitivity and phase required. The optimal detection accuracy for each product can be obtained without any other complicated adjustments.
|
|
Feature/Advantage
-Stable & Sturdy-
* Panel Size: 15"-22"
* Multi-Language OSD Control Menu
* Touch Technology: R5W, SAW or CAP
* Touch Interface: USB or RS-232
* Video Interface: D-SUB (VGA)
* Built-in Multimedia Speaker
* VESA Wall Mounting
* Hardware customization available
* Different stand or wall mount rack options
* Beautiful and superthin design
* Environmental protection and space saving
Application:
*Point-of-sale terminals
*Information Kiosks;
*Food Service and Preparation;
*Medical Instrumentation;
*Process Control Systems and Transportation Tracking;
*Vending and ticket sales;
*Electronic catalogs;
*Gaming; Lottery, and amusement;
*Public pay phones;
*Multimedia marketing;
*Banking/financial transactions;
*Industrial control rooms;
*Computer-based training.
|
|
* Panel size: 10.4"-19"
* Multi-language OSD Control Menu
* Touch technology: R5W, SAW or CAP
* Touch interface: USB or RS-232
* Video interface: D-SUB (VGA)
* Optional built-in multimedia speaker
* VESA wall mounting
* Hardware customization available
* Different stands or wall mounts rack options
* Super-thin design
* Stable & sturdy
* Environmental protection and space saving
Application:
* Point-of-sale terminals
* Information kiosks;
* Food service and preparation;
* Medical Instrumentation;
* Process control systems and transportation tracking;
* Vending and ticket sales;
* Electronic catalogs;
* Gaming; lottery, and amusement;
* Public pay phones;
* Multimedia marketing;
* Banking/financial transactions;
* Industrial control rooms;
* Computer-based training.
|
|
* Panel size: 10.4"-19"
* Multi-language OSD Control Menu
* Touch technology: R5W, SAW or CAP
* Touch interface: USB or RS-232
* Video interface: D-SUB (VGA)
* Optional built-in multimedia speaker
* VESA wall mounting
* Hardware customization available
* Different stands or wall mounts rack options
* Super-thin design
* Stable & sturdy
* Environmental protection and space saving
Application:
* Point-of-sale terminals
* Information kiosks;
* Food service and preparation;
* Medical Instrumentation;
* Process control systems and transportation tracking;
* Vending and ticket sales;
* Electronic catalogs;
* Gaming; lottery, and amusement;
* Public pay phones;
* Multimedia marketing;
* Banking/financial transactions;
* Industrial control rooms;
* Computer-based training.
|
|
* Panel size: 12"-19"
* Multi-language OSD Control Menu
* Touch technology: R5W, SAW or CAP
* Touch interface: USB or RS-232
* Video interface: D-SUB (VGA)
* Optional built-in multimedia speaker
* VESA wall mounting
* Hardware customization available
* Different stands or wall mounts rack options
* Super-thin design
* Stable & sturdy
* Environmental protection and space saving
Application:
* Point-of-sale terminals
* Information kiosks;
* Food service and preparation;
* Medical Instrumentation;
* Process control systems and transportation tracking;
* Vending and ticket sales;
* Electronic catalogs;
* Gaming; lottery, and amusement;
* Public pay phones;
* Multimedia marketing;
* Banking/financial transactions;
* Industrial control rooms;
* Computer-based training.
|
|
Feature :
- 17” TFT LCD 1280 x 1024
- Built-in A/D Board
- Built-in OSD Button
- Support D-SUB and DVI-I Input
- The depth of chassis would be 515mm
- RoHS ComplianceT
|
|
| ... products without technical information |
| |
|
|
|
|
Hand-held torque meter with separate sensor for measuring the torque of screws, components, screw and plug connectors, drive shafts etc.
Mains and battery operation with memory and output signal
Measuring range 0 - 0.5 Nm/2.000 Nm/5.000 Nm/10.00 Nm
Resolution 0.001 Nm/0.01 Nm
- Two selectable modes: Real Time: to display load transients
Peak Modes: to capture the peak force achieved during a test
- Display of opening or close torque (clockwise and counterclockwise torque)
- 3 selectable units: Nm, kgfm, lb.in or Ncm, kgfcm, lb.in
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
- Storage of 1000 values for recall:
· on the display
· for data transfer to PC
· for printing with report
- torque meter with high internal Sampling rate
- 3 output signals: RS232, analog and Mitutoyo Digimatic
- 4 different torque sensors available
- The torque sensors of models HTG2-10 and HTG2-10 NC includes an additional supporting handle for better operation
- Torque measuring unti for fast, accurate measuring
- High repeatability
- Easy to use
- Manufacturer`s certificate with measured values is included
|
|
|
|
|
|
Desktop-torque meter with memory and output signal for checking the opening and close torque of screw caps of bottles, glas jars, cosmetics etc.
For applications in beverage, cosmetic and pharmaceutical industry etc.
Measuring range 0 - 2.000 Nm / 5.000 Nm / 10.00 Nm
Resolution 0.001 Nm / 0.01 N
- 2 selectable modes: Real Time: to display load transients
Peak: to capture the peak force achieved during a test
- Display the opening or closing torque (clockwise and counterclockwise torque)
- 3 selectable units: Nm, kgfm, Lb.in or Ncm, kgfcm, Lb.in
- Clambs containers from Ø 20 to 180 mm (smaller Ø on request)
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
- Storage of 1000 values for recall:
· on the display
· for data transfer to a PC
· for printing with report
- Torque measuring unit with high internal measuring frequency
- 3 output signals: RS 232, analog, Mitutoyo Digimatic
- 2 Models: - DTX2A mains operation
- DTX2B battery and/or mains operation
- Torque meter for fast, accurate measuring
- High repeatability
- Easy to use
- Manufacturers certificate with measured values is included
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
