|
|
|
|
|
|
Motorized box storage for 150 boxes (300 boxes – ML - on request)
Box storage available on left (SX) or right side (DX)
2 x Carriages moved by compressed air with vents to pick the plain boxes from box storage, square them and push them in the motorized driving belts (2 x Motors HP 0,18) while folding the bottom flaps & sealing them with the tape sealer K11, 50 mm (K12, 75 mm on request).
Machine controlled by PLC to synchronize the different machine movements and eventually harmonize other machines to be connected (box filler – conveyor line – carton sealer etc).
Safety Protections with switches to disconnect electrical & pneumatic if opened
Control panel equipped with:
- Box counter Low box storage alarm
- Brake/end tape alarm
- Full line alarm after the machine
Box dimensions
F144
Min. W. 150 H. 120 L. 200 mm
Max W. 350 H. 450 L. 450 mm
Production 12 bpm
F144/4
Min. W. 110 H. 100 L. 150 mm
Max W. 350 H. 400 L. 400 mm
Production 12 bpm
F145
Min. W. 150 H. 120 L. 220 mm
Max W. 350 H. 450 L. 560 mm
Production 10 bpm
F146
Min. W. 200 H. 200 L. 300 mm
Max W. 400 H. 400 L. 620 mm
Production 8 bpm
HIGHER SPEED MACHINES WITH ELECTRICAL MOVEMENTS
F344 – F344/4 – F345 – F346
The 2 vents carriages are moved by electrical axes instead of pneumatic pistons to reach a max speed of 18 bpm F344 and 16 bpm F346.
The machine control panel is equipped with:
- Touch Screen Panel with Trouble Shouting
- Automatic “0” setting up
- Vents carriages speed adjustment
- Box counter – Box timer to set up productivity per minute
- Low box storage alarm
- Brake/end tape alarm
- Full line alarm after the machine
|
|
SOCO Pack ATS - tape
Case erector with integrated bottom sealing.
The SOCO Pack ATS is a high speed, fully automatic case erector with integrated bottom tape sealer. The machine is easy to operate and adjust for different case sizes by simply turning a handle. Its compact design allows easy installation into a new or existing production line.
The SOCO Pack ATS is the perfect start of the packaging line.
|
|
Automatically picks and forms top load cartons/trays via lock or glue
Capable of forming cartons by lock, fold-over end wall, or glue
Pick-n-place carton feeder
Can be equipped with 1, 2, 3, or 4-forming heads at a time
Overload detent system for jam protection
Quick change tooling consists of plunger, forming cavity, hopper frame, shuttle bar and pick bar
Vacuum pick control by foot switch or conveyor mounted photo eye
Full safety guarding
Heavy duty construction for long term reliability
Speed: up to 60 strokes per minute
Casters and leveling feet for portability
Integrate with a packing conveyor and RAC, SLC, or 16C tri-seal closer to create a complete Top Load Packaging Line
Options
Washdown construction
Plunger mounted air cylinder to eject cartons
Flighted outfeed conveyor
|
|
The new Combi CE-10 is an automatic system that erects and bottom seals corrugated cases at speeds from 500 to 700 cases per hour. This new value-priced case erecting solution is ideal for applications that require more throughput than manual case erecting can provide. This versatile system creates instant labor savings and increases production for a wide range of medium-speed applications. With industry-leading standard features like low-case and low-tape alarms, and fast no-tool changeovers, the CE-10 is a simple, operator-friendly solution for your packaging line.
Standard Features
- High-capacity powered case magazine holds 150-200 cases
- Small footprint design minimizes floor space
- Low case & low tape alarms with stack light assure continuous operation
- Safety interlocked guarding restricts access to moving parts
- 2 inch 3M Accuglide II Tapehead
- 10 case per minute operation for medium speed packaging lines
- CE international certification
|
|
The Superformer SF1 erects RSC cases, folds the bottom flaps and closes them with
tape. Unique features of this machine include stainless steel exterior finish, automatic case squaring system, easy size change, tape and case monitoring.
|
|
|
The BE-2/3/4 Monoblock are completely automatic machines designed for unfolding and erecting boxes. The folded boxes (flat) are kept separately from the machine motorized store and opened by suction cups. The same suction cups, acting together with an angular arm, longitudinally convey the boxes through the machine quickly grabbing the bottom flaps, folding them and so preparing the box for the sealing; in fact these machines are connected to a taping machine for the only bottom sealing: so the box is ready to be filled. All these machines are controlled by PLC Siemens.
|
|
CF-20T Case Erector / Case Former
A fully automatic Case Former built for applications that require a small foot print and slower speeds. A patented box flow process has made the CF-20T a one of a kind Case Former.
Standard features:
Powered hopper
Small footprint
Positive drive system
Quick changeover
|
|
CF-5 Case Erector / Case Former
Loveshaw now offers a semi-automatic case former. This low-cost machine has an ergonomic design and accomodates a wide range of boxes. The CF-5 is PLC driven and requires no lubrication. Slide and lock legs adjust to meet most conveyor heights.
|
|
Operation
Erecting of cartons from flat carton sheets.
Products
Corrugated card board- or solid fibre board cartons. Standard trays, display trays, trays with U-stacking edge, Plug-in-flap, Braces, 3-side-close-lid or crates.
Design
Wide format variability with compact design. A servo controlled format plug allows maximum performance (up to 40 T/min) and shorter format change over times.
|
|
· Positive
· High speed
· Flexible
ADVANTAGES
· Positive case extraction
· Precise case forming
· Inner flap folding guaranteed
· Accurate gluing and squaring
· American cases (RSC), half cases, cases with special flaps and pre-joined display cases can all be handled on this machine
ERGONOMICS
· Clean design offering easy access
· Centralised adjustment points to ensure a quick format changeover
CHARACTERISTICS
· Extensive size and speed range
· Several case sizes can be handled on the same machine (multiple case magazines)
· Various options depending on requirements: choice of operator control panel, automatic size changeovers, etc.
|
|
TBF40
The TBF 40 machine can erect trays and boxes with covers. Boxes can be closed with hot-melt glue or tuck-in closure. The TBF 40 is suitable for food, bakery or frozen products, ice-creams, spare parts, small metal products, textiles, etc... It can also be connected in line to closing machines, dosing and filling units, to create complete lines.
The machine can be equipped with:
Erecting hopper adjustable by hand-wheels
or engines;
High capacity magazine;
Stainless Steel Frame.
|
|
|
|
|
|
The KOCH carton formers are employed for production of a huge number of varying boxes by application of a stamped carton blank made of solid fibre board or corrugated cardboard. The carton blank is picked out of a magazine by vacuum suckers. Afterwards the carton blank is placed into guide rails. Horizontal, oblique or pallet magazines are available depending on demand. Individual tracks or dots of hot glue are applied on the glued joints during feed via forming tool.
After reaching the stopper the carton blank is pressed through the forming tool by a forming tappet, moulded in and glued together. The finished boxes are transported out of the machine via outfeed conveyor belt rising laterally or frontally out of the machine. The glue tracks are controlled via machine control. The adjustments for different formats can be entered directly on the user interface. Furthermore it is possible to employ crimp tools to form the carton blanks without using hot glue.
Advantages of this machine technology
- Different sizes and performance ranges allow the optimal selection of a carton former depending on particular demand.
- Change of forming tools is not required, because the tools are equipped with adjustable spindles. Only the forming tappet must be changed.
- Quick format change
- Drives via servomotor, resulting in easy adjusting on the control monitor and format optimized motions.
- State-of-the-art control technology via industrial PC with convenient operator guidance via touch screen. Optionally Siemens S7.
- Telephone connection for remote diagnosis
|
|
Robopac presents an automatic carton forming machine with a high output and a long lifespan. The new SUPERBOX forming machine retrieves the cardboard blanks, opens, folds and forms the boxes and then seals the bottom with tape. This highly versatile machine can use tape rolls of the kind commonly found on the market. The machine is composed of a blanks magazine, a section where the cartons are opened, and a discharge roller where the cartons are taped at the base.
Format changeovers are easily done using 5 handwheels and adjusting the strikes in the blanks magazine and the position of the suction caps. Three versions are currently available — Superbox 544, 545 and 645.
|
|
Technical characteristics:
- Highly reliable box assembly by means of mechanical movements around a single geared motor.
- Construction in stainless steel and profiled aluminium sections on a painted, mechanically welded chassis
- Easy access, wide-opening doors facilitate maintenance.
- Easy to use. computer managed, with a pivoting display unit for the operator
- The autonomous nature of the machine means that an operator is not required to be present permanently
- Precise and economical gluing by means of a 'Hot Melt' glue injector distributed by roots rotary pump fed by an 11 litre tank.
- Memorisation of the glue setting for each format
- Manual setting by means of wheels, average setting time: 10 minutes.
- Electrical rating: 7 kW.
- Pneumatic consumption. 25 m/h at 7 bars
- Options:
largo capacity box cartridge.
304L stainless steel body.
Stacker.
"C* module lor folding of edges with trays in direction of the machine length.
|
|
The automatic case erectors F144/145/146 draw, erect and seal with adhesive tape the bottom flap of cardboard boxes, ready then to be filled, with a variable output between 500 and 800 boxes/hour according to the dimensions. The machine adjustments are simple and fast. They have been designed for easy use also by unskilled people. They do meet the CE regulations on safety.
- Metal grill guards only for mod. F144/4 - F144 - F145
- Control board with indicators of operation anomalies.
- Rotating air cylinders, individually controlled, for an optimal box squaring
- Suction cup carriage adjustable in height/width
|
|
FOR-1500
Automatic carton erector Freestanding
Output: 1500 cartons/hour
The automatic carton erector FOR-1500, freestanding version, draws, erects and seals cartons, with adhesive tape or hot-melt glue (optional). The machine sends the cartons by the conveyor belt to the carton packer freestanding Serie MEGA.
The change format of the carton size is simple and quick.
Safety is total and oversize PLC can be increased.
FOR-1500 is also available in the antiexplosive version: Serie FOR/AD.
|
|
Fully automatic machine suitable to erect boxes and trays, either with tuck-in or hot-melt glue closing with Nordson applicator.
The V 103 machine operates with flat blanks, microwave or corrugated cardboards and it can also be equipped with fast size changeover through digital indicators.
Machine can be provided with special forming head for double-side flaps, with tuck-in on the bottom.
V 103 machine is particularly studied for packaging lines and it can be linked to loading and pick and place systems, lid closing machines,conveyors etc.
Main fields of use are food industry, biscuits, ice-cream and frozen food industry, mechanical, components-spare parts, plastic industry.
|
|
|
|
|
|
The WF30 fully automatic case former / case erector overcomes the common variables involved in forming cases that are often associated with the quality of corrugated. It easily handles the common imperfections in corrugated that can disrupt the forming process, and this remote demand-controlled machine will effortlessly open and form your RSC, HSC or CSSC cases at 30 SPM.
The WF30 automatic case former has re-invented the toolless set-up, offering simpler, "user obvious" features that mean a quick and easy case size adjustments for packaging lines. Box one is ready to run without the use of tools or guide-books. A color-coded, tactile guide offers a more efficient, friendly system for operators.
Case forming is handled by the Pin & Dome mechanical mechanism and the pin adjustments can be easily released and re-inserted into any different position quickly without having to completely unbolt the mechanism. A new case squaring system, ensures accurate forming by checking squareness throughout the entire forming process. The Tilt-out Tape Head (for the tape version), minimizes downtime with the quick and easy accessed bottom tape head, for fast tape changes.
The WF30 is available for pressure sensitive tape case sealers or hot melt glue forming.
|
|
|
The KF lock-style forming machine is a best-in-class machine. Along with the prestige of being the most widely used top-load carton forming system in the world, it outsells all other machines combined. The KF former has evolved into one of the most rugged, versatile and highest-performance machines in the industry - capable of running special carton forming heads to accommodate unique carton styles. The key to the KF's success is its simplistic design, fast change over, and ease of maintenance.
|
|
Setting new standards, Lantech has always stood for cutting edge innovation and our C-Series case erectors continue that tradition.
We've set new standards for productivity and efficiency in low speed case erecting applications
|
|
|
|
|
|
Semi-Automatic Case Former / Case Erector - BEL 450 Overview
The BEL 450 is a semi-automatic poly bag inserter & pack station with top & bottom case taping. Designed for use on bulk filling lines, the BEL 450 provides a cost effective alternative to the difficult process of manually inserting poly bag liners into corrugated cases. Cases are placed on the vacuum plenum after which a poly bag liner is placed into the box. The bag is quickly drawn fully into the case leaving no voids in the box corners, and the case is then ready to be filled.
Filling of cases can be done manually or automated further with the inclusion of an optional programmable weigh scale that can also verify count. Alternatively the BEL 450 semi-automatic poly bag inserter/case former can be fitted with an optional load cell for interfacing with existing automatic scale filling equipment such as auger or hopper fillers, and belt feeders.
After filling, the operator closes the poly liner, folds the top case flaps closed and moves the case forward into the conveyor where tape is automatically applied to seal the top and bottom flaps. The BEL 450 semi-automatic poly bag inserter/case former is an ideal solution for automating bulk packing lines and can quickly recover its modest investment through labor savings and improved efficiencies.
|
|
| ... products without technical information |
| |
Internal dimensions :
4.5 m x 2.5 m x 2.0 m
Working temperature : 160°C
Control system :
Scheduler, regulator and recorder
|
|
- Applications: cooking, degassing, burning, polymerization, pre-heating, recovery, drying, stabilization, sterilization, vulcaniztion, tests,...
- 2 temperatures: 200°C maxi or 300°C maxi (depending on the option).
- Eight sizes: from 125 litres to 2520 liters.
Several options and accessories to adapt the oven to your needs.
|
|
|
|
|
|
The Qmax Series High Performance Reach-in forced-convection oven is specifically designed to meet the frequent air changes and tight temperature uniformity required of the ASTM 5423 Type I & Type II oven specification. A high-volume fan circulates air through perforated, stainless steel walls to create a constant horizontal airflow across all sections of the oven. The result is highly uniform airflow to easily meet ASTM 5423 Type I and II specification while tested according to ASTM 5374.
The Qmax Series High Performance Reach-in oven exceeds the ASTM 5423 Type II performance requirement a temperature variation of less than 6°C at 300°C while maintaining 100-200 air changes per hour. In addition, the brass bar thermal lag time showed superior oven temperature recovery. These ovens can be used for applications such as thermal evaluation of electrical insulating materials, testing, aging, curing, drying, sterilizing and other thermal applications where tight temperature uniformity is required.
|
|
Despatch RA and RF Series Reach-In Ovens feature uniform airflow and temperature consistency, ergonomic design, and smaller footprint
The Despatch RA Series and RF Series Reach-In High Performance Production Ovens have been used throughout the world for industrial production environments. These ovens are designed to provide process versatility, reliability and consistency in drying, curing, bonding and heat-treating applications. Ideal for use in industrial production environments, these ovens operate up to 650º F. The RA Series is designed for use in standard environments, and the RF Series is designed for Class A environments where flammable solvents are used. Despatch provides the design integrity, manufacturing experience and emphasis on quality necessary for dependable operation and excellent process control. To learn more please visit us at www.despatch.com or call our Product Specialists at 1-800-828-9903 Int'l 1-952-469-5424
|
|
| ... products without technical information |
| |
... see all the products in the category
Ovens
|
|
|
|
|
FULLTEST4058 model was designed from HT ITALIA to performing essential tests in industrial environments on electrical machines devices and partially type-tested assemblies (PTTA) in compliance with EN60204-1 and EN60439-1 respectively.
The meter principally performing Continuity test on potential equalising conductors with >10AAC test current, Insulation Resistance with 500VDC test voltage and Withstanding tests with 1000AC test voltage (for electrical machine devices) and 2500V test voltage (for individual test on PTTA assemblies switchboards).
Withstanding test is performed also in BURN mode with no limits on trip-out current. Discharging Time measures of internal capacitance and on external plugs of device under test complete the list of possible test with this meter.As FULLTEST4050 more advanced model also FULLTEST4058 have a built-in internal memory to save all measurement results and a RS-232 PCs interface for directly transfer of saved tests by dedicated Windows software.
The model is fitted inside a practical and protected plastic case board with no flammability and a membrane keyboard for rapid selection of functions is included on the frontal panel together a wide custom display.
FULLTEST4058 is the ideal solution for any kind of verifier and/or industrial installer to performing easily and rapid test on industrial appliances.
|
|
. Reduced system
. IP 65 67
. Personalization with your needs
. Applications: boxes/cases, tables, cupboards, cabins/shelters
. Resistance to the vibrations, the shocks, the rodents, the cold heat/, fire, the products
|
|
Product group P3
Pivoting frame for directed ventilation
Electric data:
• Protection class I (ground wire)
• Protection type IP 20
• Connecting leads 0,5m 3x0,75 mm² PVC
Other lengths upon request
Utilizing a circulation fan avoids head accumulation and formation of heat pockets inside control cabinets. When heaters are installed, their efficiency is increased by circulation fans. The resulting air circulation dissipates heat through the surface of the cabinet and so, a cooling effect is achieved.
|
|
|
... see all the products in the category
Axial fans
|
|
|
