|
|
|
|
|
|
The TC is a wraparound packaging machine for continuous wrapping of products of different shapes and types at medium speed.
Extreme flexibility, accessibility and visibility of the processing cycle, combined with very short size change times and ease of operation, allow this machine to provide an essential solution to the many and varied demands for corrugated cardboard packaging.
As well as considerable use of electronics, with the introduction of electric axes, the model's most important innovation compared to conventional wraparound machines is the large in-line carton store, in which the cartons are loaded vertically ®.
This solution greatly simplifies fill-up operations, as well as allowing a very high storage capacity in relation to the speed of use. The structure has a free-standing tubular steel frame with large sliding access panels which simplify maintenance and size changes and allow a total view of the mechanical moving parts.
Depending on the speed required there is a choice of two families: TC300 and TC450
TC series machines can be completed with film module and shrink tunnel to transform them into TC Combi series units.
- Speed: up to 45 packs per minute according to the sizes and characteristics of the product
- Shrink film thickness: from 40 up to 80 microns (combi machine)
- Film reel maximum diameter: 500 mm (combi machine)
- Film reel maximum width: 700 mm (combi machine)
- Carton magazine capacity: up to 600 according to tickness
- Max lenght of the open cardboard (L): 1200 mm
- Max width of the open cardboard (W): 650 mm
- Carton quality: one flute, tickness 3 mm (B-flute)
- Outside and inside covers in test paper from 150 to 200 g/m²
- Central flute in medium paper from 125 to 180 g/m²
- Continuous separation system (TC450)
- Large and easily accessible line-tray magazine
- Easy and quick access for product size changeovers
- Sliding operator access doors
- Brushless servomotor drives
- Short and easy maintenance operations (belt drive and oil less bearings)
- Low noise level
- Modular constructions, easy accessibility and complete visibility of the production cycle
- Touch screen control panel
- Size changeover time: 10-15 min.
|
|
|
The Superliner™ SL220 Gusseted Bag Maker & Bag Inserter makes a polybag from Roll Stock Film of Continuous Gusseted Polyethylene Tubing, inserts the bag into a bottom closed shipping container: case, crate, drum or tray, and cuffs the bag over the edges.
|
|
|
|
|
|
Bag Inserter Opens, Inserts, and Cuffs Bags Up To 18 CPM!
The Pearson B18 Bag Inserter is designed to automatically open and insert a plastic bag into an empty RSC. Tablock RSC. HSC, FOL, or Bliss style case, tray, or container at speeds up to 18 cases per minute. This Bag Inserter is an extra heavy duty, three shifts per day, dependable machine capable of handling a wide range of bags, styles, and sizes.
Flat or gusseted bags from presealed and perforated roll stock are fed to an opening station. A vacuum plenum secures the bag and the carriage opens the bag above the waiting case. A cuffing mechanism contains the bag and permits a mandrel to enter the bag and travel to the bottom of the container. Simultaneously, the cuffing mechanism cuffs the bag.
As the mandrel is retracting, the carriage closes to allow the vacuum plenums to secure the next bag, maximizing vacuum establish time. When the mandrel is retracted, the case is released to transfer out of the loading station.
For future capacity requirements, Pearson's BI18 is fully upgradable to the BI25 Bag Inserter for speeds up to 25 cases per minute.
Pearson's BI18 can either be positioned over an existing conveyor or one can be supplied by Pearson as an option. Case control guides and case indexer are standard. This machine is equipped with a fully enclosed guard package, complete with electrical interlocks. An Allen-Bradley6, PLC, PackML compliance, ULe Listed Control Panel, two bag roll stands, and inventory control photoeye at discharge are also standard.
|
|
The bag in box BC-01 is feed the bag from a roll, seal and fold the edge around the box.
The bag placing technology can be widely used and is very flexible. The film dimensions, thickness and materials (LDPE, HDPE, etc.) can vary largely.
The technology can be found in various concepts (solutions) and in various forms.
The technology can be widely used. Businesses benefit from optimum product protection and transport.
|
|
|
|
|
|
This new 2-in-one design simultaneously uncases empty bottles from reshipper cases while place packing full bottles, utilizing only one machine, in one location, with no labor. This innovative machine will increase line productivity by eliminating manual uncasing and case packing; reducing bottle breakage and label damage; and ensuring a consistent bottle supply to the production line.
Here's how it works:
As the bottle transfer head lowers to the conveyor, one side of the head grips the load of filled bottles for case packing. It cycles the bottles into the waiting case, and as they are packed, the other side of the head locates the empty bottles in the adjacent case. As the bottle transfer head returns to the conveyor, it carries empty bottles to be filled.
After unpacking, the emptied case moves to the packing station where it is packed with filled bottles and transfers to case sealing. Meanwhile,the empty bottles travel by conveyor in a loop for cleaning, filling, capping and labeling- then back to the Model 360 where they are packed into the emptied cases.
The cases move in a straight line from depalletizing through unpacking and case packing, then on to top case sealing and palletizing.
|
|
The Incarobot/Decarobot is an automatic crater/decrater designed specifically for returnable glass bottle filling lines with rapid format changeovers.
The movements of this automated machine are programmed to perform high-speed crating/decrating. Suitable for various applications, the machine is very flexible due to the modularity/orientation of the units, wide working area and combined operations. Easy access and minimal floor space requirements mean it can be readily fitted into existing lines.
|
|
Wrap-around case packers series PL@NET with case formation and closure in continuous to pack products into cases or into trays and shrink wrapping machine series ST@R.
The series PL@NET is the result of the long-term Dimac's experience on case packers, the maximum of innovation and the market demands.
COMBI machines are based on a "top level" technology:
* possibility to control all machine functions
* easy and precise size change
* high flexibility to handle every kind of container
* machine automatic check-up
* easy maintenance
* high accessibility
* machine solid and reliable
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
