|
|
Hartness GlobalShrink Tray Former Shrink Wrappers are consistent with Hartness "simply innovative" design philosophy. Servo motors are used only when absolutely necessary, eliminating the need for complicated controls and ensuring ease
of understanding and simplicity of operation for both maintenance personnel and operators.
An often overlooked aspect of wrapping systems is the shrink tunnel. Hartness GlobalShrink tunnels are highly insulated, comfortable to touch, and extremely quiet. GlobalShrink tunnels are custom designed to shrink your particular packages.
The result is a tight, safe to handle, good looking package. This is accomplished using less energy than many competitive wrappers, resulting in a lower long term cost of operation.
Three speed models are available — TFS 60, TFS 80, TFS 100— 60, 80, 100 Trays per minute respectively.
|
|
|
The Tray Loader / Former ''TR Series'' is extremely versatile, easy to operate, and highly reliable. The TR-15 is an intermittent motion shrink packaging equipment collating products into trays at about 15/min. The TR-35 and the TR-50 are continuous packaging equipment running at a speed of 35 per minutes and 50 trays per minutes respectively. Products are stabilized and controlled throughout the process. Adjustments for different tray sizes are made quickly and easily. The durable stainless steel construction provides years of service. The TR can be integrated with a Polypack shrink wrapper to provide a secure, protected package ready for distribution.
|
|
The CM series includes a wide range of automatic packaging machinery, for the packing of various products in corrugated cardbooard cases and/or in trays with or without film.
Being designed to offer great flexibility, the CM series allows to handle many different pack collations and provides outputs up to 70 packs per minute.
Products can be packed both in cardboard cases and in trays, with walls of the same height or of different heights.
Thanks to the Tlespack system it is also possible to pack products in double-layered packs.
Case or tray formation is carried out in-line through smooth and continuous motions; the wrap-around process as well as the hot melt sealing process ensure complete pack integrity, rigidity and stability. If products are packed in trays with film, the film is wrapped around the tray and overlapped at the bottom of it.
Trays eventually enter the shrinking tunnel, where the film is shrunk by a stream of hot air.
|
|
Wrap-around case packers series PL@NET with case formation and closure in continuous to pack products into cases or into trays and shrink wrapping machine series ST@R.
The series PL@NET is the result of the long-term Dimac's experience on case packers, the maximum of innovation and the market demands.
COMBI machines are based on a "top level" technology:
* possibility to control all machine functions
* easy and precise size change
* high flexibility to handle every kind of container
* machine automatic check-up
* easy maintenance
* high accessibility
* machine solid and reliable
|
|
Meypack SW 60 D/W Series
• For loose and pre-packed products
• Low film consumption
• Quick film reel change
• Can be directly combined with tray packer VP 450/451
Functions
• Constantly heated sealing beam, low maintenance, long life and simple to change.
• Frequency converter product transport drive for speeds exceeding 25 cycles/min.
• High efficiency flat belt, wire mesh or roller conveyor shrink tunnel.
|
|
Automatically wraps flat sleeves around randomly supplied rectangular trays
Accepts products randomly or back to back
No mechanically synchronized running parts.
Servo powered pick & place sleeve feeder
Overhead drive conveyor with flexible grippers
No-tool size changeovers with digital readouts
Metric construction
Compact stainless steel frame
PLC control system with touch screen interface
Washdown construction
Speed: Up to 60 sleeves per minute
Full safety guarding
Casters and leveling feet for portability
Available for quick delivery
Ink Jet coding is also available
Length 3 - 10 (75 - 250mm)
Width 3 - 9 (75 - 225mm)
Depth ¾ - 3 (20 - 75mm)
|
|
The MP series includes a wide range of automatic multipackers, for the packing of various products in die-cut cardboard sleeves.
Being designed to offer great flexibility, the MP series allows to handle many different pack collations and provides outputs up to 300 packs per minute.
Products can be packed either in 'over the top' or in 'neck through' style.
Options to fold and form top gusseted retaining flaps are available, so that products can be better contained into the pack.
Pack formation is carried out in-line through smooth and continuous motions.In addition the hot melt sealing process ensures complete pack integrity, rigidity and stability.
At the multipacker outlet packs can be turned by 90° and divided into different rows, thanks to the RD pack turner/divider. This pack turner/divider can be installed on all machines of the MP series.
|
|
|
|
|
|
In any industry, it has become necessary to innovate and streamline production processes to create better and more efficient workflows. Increasing demands, newer technologies, and more competition means, to stagnate is to lose out. The field of packaging is no different, and is a dynamic, ever-changing area of great potential and progress. It is in this vibrant atmosphere that Pam-Pac has moved to the forefront with unique packaging solutions offered through a range of blister-packing and cartoning machines for pharmaceutical as well as nonpharmaceutical applications.
The Sleeve Cartoning machine designed & developed by Pampac, enables insertion of blisters into a sleeve, without end closures or tuck-in flaps. Its detailed features are as follows:
Features
- No changeover parts are required for different blister sizes; it is a Universal machine
- As an option, the machine can be offered with a stainless steel finish
- The Magazine holds upto 1500 cartons.
- Verifies bar code or any other special code recognition.
- Rejects unacceptable cartons
- Minimal change-over & setup time.
- Visible product path.
|
|
Sleeving
Serie MP
Carton sleeving machines for packaging of single or multiple products-medium-high speed.
|
|
CARTON WRAPPING MACHINE CRW6K
A wrap around sleeve machine for wide variety of products.
Capacity : up to 120 packages/minute
|
|
TRAYBOX 007
Output: 11 trays/minute
TRAYBOX 007 is studied to insert the blister in trays. Its functions are:
1. to open the trays edges. It is took from its magazine;
2. to insert the blister in the trays;
3. to open and close the cover directly on the trays with hot-melt glue.
TRAYBOX 007 is adapted to packed the blister with base "small and big side", thanks to an automatic change format that permits an easy and quick operation.
It guarantees high productivity, little maintenance and the aesthetic of the production lines.
|
|
| ... products without technical information |
| |
|
|
|
|
The flexible cuffs QuickFlex are used without the processes for powders or granulated. They allow d%u2019isoler mechanically equipment the ones compared to the others. Ex: to isolate a vibrating sifter compared to his screw from proportioning.
QuickFlex consist of:
- 2 rigid pipes to weld onto the 2 parts of the process having to receive the cuff. These pipes are equipped with patented sections, adapted to the QuickFlex cuff.
- 1 flexible pipe whose two ends are equipped with bands d%u2019acier with spring moulded in l%u2019élastomère of the cuff. The installation of the cuff is done in a very simple way, by deforming the band d%u2019acier with spring in order to l%u2019insérer in the rigid pipes. The original shape of the section ensures then a perfect sealing of the cuff.
The assembly is done without tool in less than 20 seconds. One thus eliminates the risks to be wounded with screwdrivers during tightening from the traditional collars. Moreover the sleeve is adapted perfectly to the pipe.
No zone of retention n%u2019exist enters the flexible cuff and the pipe.
The system is tight with the emissions of dust. It resists an explosion of dust.
From its design, the phenomena of shearing of the cuff by the collar are eliminated.
Various d%u2019élastomères qualities are available:
Let us quote in example a food translucent polyurethane execution allowing to control l%u2019interior of the process visually.
For l%u2019industrie mineral, flexible cuffs in Kevlar are available.
These cuffs are available in a diameter ranging between 100 and 650 Misters.
|
|
The 2" coupling size probably covers the most diverse selection of applications in the Todo-Matic family. Available in a range of material and connection configurations, Todo-Matic 2" is designed for rapid and safe transfers. Offshore chemical dosing, pharmaceutical feedstock and aggressive chemical vapor transfer are just some of the challenging applications Todo-Matic couplings see on a daily basis.
|
|
Ultra Thin-wall Flexible Metal Roll is extremely thin at only 0.03 mm. It is soft and flexible, yet rigid with high tensile strength of stainless steel. This roll shows the best performance when used in a fuser unit of a printer or copier, realizing wall contact and shorter standing-up time.
Features
Ć Thickness: 30 micron minimum
Ć Seamless
Ć Create wall contact rather than line contact, resulting in effective nipping
Ć Excellent thermal conductivity resulting in shorter stand-up time and conservation of electricity
Ć High tensile strength of stainless steel
Ć Smooth surface
Ć High precision in thickness, roundness, outer and inner diameter
Ć Light
Ć Plating, plastic coating, and rubber coating on surface
Ć Choice of magnetism and nonmagnetism
Application
Ć Fusing unit in a printer or copier
Ć Other parts in a printer or copier
Ć Motor cover, Rotor cover, Stator cover
Ć Plastic Sheet forming, Film forming
Ć Lamination
Ć Seamless Bellows
|
|
Style 630
Material Specifications:
Body: 18-8 Type 304 Stainless Steel to ASTM A-240.
Bolts: 18-8 Type 304 Stainless Steel.
Nuts and Washers: 18-8 Stainless Steel, coated.
Flange: 18-8 Stainless Steel, ANSI 150 Lb.
Drilling. Recess per MSS-SP60. Also available in Carbon Steel per AWWA C-207, Class D.
Gasket: Buna N (Nitrile) specially compounded for water applications. Proven in water service
for over 50 years. Wedge-type gasket design for higher sealing pressures.
Finish: Fully Passivated to ASTM A-380.
Usage: For cast and ductile iron, PVC (DR 18 or thicker), A-C and steel pipe installations.
Pressure Rating: 150 PSI or higher depending on pipe material and branch size.
|
|
| ... products without technical information |
| |
RPS markers are heat shrinkable marking sleeves for wire and
cable identification. When RPS is printed with Tyco Electronics
recommended printers and ink ribbons, the marks remain legible,
without any post printing process, even when exposed to
abrasion, aggressive cleaning solvents, and industrial fluids.
RPS markers are designed to meet the wire identification needs of
commercial and industrial customers.
Features and benefits
Permanent identification sleeves
Computer printable
Excellent print performance
Configured for ease of kitting
Good chemical and solvent resistance
3:1 shrink ratio
CSA Certified, UL Recognized
|
|
TMS-SCE marker sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements.
Made from durable, flame retardant, radiation crosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves can be used in a wide variety of applications.
All TMS-SCE meet the performance requirements of SAE-ASM-DTL-23053/5 class 1.TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL-23053/5 classes 1 and 3. The marks are permanent immediately after printing and remain legible even when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils. The sleeves meet the mark permanence requirements of SAEAS81531 4.6.2 and MIL-STD-202 both before and after shrinking.
|
|
PHZ
- Flexible zero halogen thin wall polyolefin heat shrink tubing for marking on site.
- Excellent properties of fire safety characteristics.
- Low smoke generation and evolution of acid gases.
- Flexible and easy mounted on cables and wires.
- 2:1 shrink ratio.
- Reduced overall assembly and marking costs on site when using Partex marking machines and software.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
