|
|
|
The BE-2/3/4 Monoblock are completely automatic machines designed for unfolding and erecting boxes. The folded boxes (flat) are kept separately from the machine motorized store and opened by suction cups. The same suction cups, acting together with an angular arm, longitudinally convey the boxes through the machine quickly grabbing the bottom flaps, folding them and so preparing the box for the sealing; in fact these machines are connected to a taping machine for the only bottom sealing: so the box is ready to be filled. All these machines are controlled by PLC Siemens.
|
|
SOCO Pack ATS - tape
Case erector with integrated bottom sealing.
The SOCO Pack ATS is a high speed, fully automatic case erector with integrated bottom tape sealer. The machine is easy to operate and adjust for different case sizes by simply turning a handle. Its compact design allows easy installation into a new or existing production line.
The SOCO Pack ATS is the perfect start of the packaging line.
|
|
Motorized box storage for 150 boxes (300 boxes – ML - on request)
Box storage available on left (SX) or right side (DX)
2 x Carriages moved by compressed air with vents to pick the plain boxes from box storage, square them and push them in the motorized driving belts (2 x Motors HP 0,18) while folding the bottom flaps & sealing them with the tape sealer K11, 50 mm (K12, 75 mm on request).
Machine controlled by PLC to synchronize the different machine movements and eventually harmonize other machines to be connected (box filler – conveyor line – carton sealer etc).
Safety Protections with switches to disconnect electrical & pneumatic if opened
Control panel equipped with:
- Box counter Low box storage alarm
- Brake/end tape alarm
- Full line alarm after the machine
Box dimensions
F144
Min. W. 150 H. 120 L. 200 mm
Max W. 350 H. 450 L. 450 mm
Production 12 bpm
F144/4
Min. W. 110 H. 100 L. 150 mm
Max W. 350 H. 400 L. 400 mm
Production 12 bpm
F145
Min. W. 150 H. 120 L. 220 mm
Max W. 350 H. 450 L. 560 mm
Production 10 bpm
F146
Min. W. 200 H. 200 L. 300 mm
Max W. 400 H. 400 L. 620 mm
Production 8 bpm
HIGHER SPEED MACHINES WITH ELECTRICAL MOVEMENTS
F344 – F344/4 – F345 – F346
The 2 vents carriages are moved by electrical axes instead of pneumatic pistons to reach a max speed of 18 bpm F344 and 16 bpm F346.
The machine control panel is equipped with:
- Touch Screen Panel with Trouble Shouting
- Automatic “0” setting up
- Vents carriages speed adjustment
- Box counter – Box timer to set up productivity per minute
- Low box storage alarm
- Brake/end tape alarm
- Full line alarm after the machine
|
|
CE-10 Case Erector -
10 cpm
The CE-10 case erector / bottom sealer erects and bottom tapes 10 cases per minute. The system features a powered case magazine, safety-interlocked guarding, and fast no-tool changeovers.
|
|
Case and tray erection on demand high flexibility, large range of pack styles
Single or three piece flat blanks of solid or corrugated board are formed into a case or tray. The packaging material can consist of a simple geometric basic shape or a variety of special shapes with attached lid and dust or side flaps.
Advantages:
Blanks size range from 500 x 400 mm and 1200 x 1100 mm
60 cartons per minute
Individual memory of production programs
Flexible transfer direction of the cartons
Quick and simple format size changes
Industrial-PC control with user friendly Touch- Screen, ensures ease of operation
|
|
The automatic case erectors F144/145/146 draw, erect and seal with adhesive tape the bottom flap of cardboard boxes, ready then to be filled, with a variable output between 500 and 800 boxes/hour according to the dimensions. The machine adjustments are simple and fast. They have been designed for easy use also by unskilled people. They do meet the CE regulations on safety.
- Metal grill guards only for mod. F144/4 - F144 - F145
- Control board with indicators of operation anomalies.
- Rotating air cylinders, individually controlled, for an optimal box squaring
- Suction cup carriage adjustable in height/width
|
|
Setting new standards, Lantech has always stood for cutting edge innovation and our C-Series case erectors continue that tradition.
We've set new standards for productivity and efficiency in low speed case erecting applications
|
|
|
Powerful machine for erection and glue-closing of folding boxes at high speeds of up to 60/120 boxes per minute. The machine is used in all industry types for stand alone or for in line operation for erection of flat carton blanks to form folding and hollow frame boxes or trays. Due to high reliability very suitable for integration in packaging lines.
|
|
| ... products without technical information |
| |
Dalmec offer a wide range of manipulators designed for the “weightless” handling of cardboard boxes, packaged wooden cases, products covered in film (polythene, shrink - wrap etc….).
Simple to use, they allow the operator to move a whole variety of packaged products, cardboard boxes and wooden cases quickly, accurately and safely throughout the working area.
Boxes can be picked either with suction tooling or with a pneumatic gripper head. Vacuum is created by either by an electric generator or by a ”Venturi” ejector.
The type, design, dimensions and picking system of the manipulators offered are tailored so as to suit the specific requirements of the user and to the varying environmental conditions available.
|
|
Handling attachment with vacuum pad. Indicated for handling of cardboard boxes or parcels.
It is the quickest and economic way for this kind of handling.
Vacuum generation by electric vane pump.
Max capacity 180 kg.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
Pneumatic linear manipulator with pneumatic gripping tool for parcels of ceramic tiles or for any part that can be gripped pushing on the sides.
Max capacity 200 kg.
Max work radius 7 m.
Max vertical stroke up to 2100 mm.
|
|
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
ANVER Vacuum Tube Lifters are easy to learn and simple to operate for loading and unloading cartons without manual lifting, bending, and stretching.
ANVER Vacuum Tube Lifters can be equipped with an extension handle that allows one person to unload and stack boxes without excessive reaching, stretching, or back strain. Models are offered to handle loads from 5 lb (2.3 kg) for non-porous loads, all the way up to 660 lb (300 kg).
|
|
Pneumatic manipulating model Standard with tool of taken for movement bags
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of an endowed manipulating of a system of taken flowing along the revolving and equipped arm of vertical movement through a detail is arranged of raising of the product. The solution is the ideal for who must enliven similari bags or products quickly (as an example scato them). The taken one happens through a ventosa and successively the product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is available on autostabile base and fixed column.
The maximum capacity 65 kg
Range 4000 milimeter
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
