|
|
Hartness GlobalShrink Tray Former Shrink Wrappers are consistent with Hartness "simply innovative" design philosophy. Servo motors are used only when absolutely necessary, eliminating the need for complicated controls and ensuring ease
of understanding and simplicity of operation for both maintenance personnel and operators.
An often overlooked aspect of wrapping systems is the shrink tunnel. Hartness GlobalShrink tunnels are highly insulated, comfortable to touch, and extremely quiet. GlobalShrink tunnels are custom designed to shrink your particular packages.
The result is a tight, safe to handle, good looking package. This is accomplished using less energy than many competitive wrappers, resulting in a lower long term cost of operation.
Three speed models are available — TFS 60, TFS 80, TFS 100— 60, 80, 100 Trays per minute respectively.
|
|
|
The Tray Loader / Former ''TR Series'' is extremely versatile, easy to operate, and highly reliable. The TR-15 is an intermittent motion shrink packaging equipment collating products into trays at about 15/min. The TR-35 and the TR-50 are continuous packaging equipment running at a speed of 35 per minutes and 50 trays per minutes respectively. Products are stabilized and controlled throughout the process. Adjustments for different tray sizes are made quickly and easily. The durable stainless steel construction provides years of service. The TR can be integrated with a Polypack shrink wrapper to provide a secure, protected package ready for distribution.
|
|
The CM series includes a wide range of automatic packaging machinery, for the packing of various products in corrugated cardbooard cases and/or in trays with or without film.
Being designed to offer great flexibility, the CM series allows to handle many different pack collations and provides outputs up to 70 packs per minute.
Products can be packed both in cardboard cases and in trays, with walls of the same height or of different heights.
Thanks to the Tlespack system it is also possible to pack products in double-layered packs.
Case or tray formation is carried out in-line through smooth and continuous motions; the wrap-around process as well as the hot melt sealing process ensure complete pack integrity, rigidity and stability. If products are packed in trays with film, the film is wrapped around the tray and overlapped at the bottom of it.
Trays eventually enter the shrinking tunnel, where the film is shrunk by a stream of hot air.
|
|
Wrap-around case packers series PL@NET with case formation and closure in continuous to pack products into cases or into trays and shrink wrapping machine series ST@R.
The series PL@NET is the result of the long-term Dimac's experience on case packers, the maximum of innovation and the market demands.
COMBI machines are based on a "top level" technology:
* possibility to control all machine functions
* easy and precise size change
* high flexibility to handle every kind of container
* machine automatic check-up
* easy maintenance
* high accessibility
* machine solid and reliable
|
|
Meypack SW 60 D/W Series
• For loose and pre-packed products
• Low film consumption
• Quick film reel change
• Can be directly combined with tray packer VP 450/451
Functions
• Constantly heated sealing beam, low maintenance, long life and simple to change.
• Frequency converter product transport drive for speeds exceeding 25 cycles/min.
• High efficiency flat belt, wire mesh or roller conveyor shrink tunnel.
|
|
Automatically wraps flat sleeves around randomly supplied rectangular trays
Accepts products randomly or back to back
No mechanically synchronized running parts.
Servo powered pick & place sleeve feeder
Overhead drive conveyor with flexible grippers
No-tool size changeovers with digital readouts
Metric construction
Compact stainless steel frame
PLC control system with touch screen interface
Washdown construction
Speed: Up to 60 sleeves per minute
Full safety guarding
Casters and leveling feet for portability
Available for quick delivery
Ink Jet coding is also available
Length 3 - 10 (75 - 250mm)
Width 3 - 9 (75 - 225mm)
Depth ¾ - 3 (20 - 75mm)
|
|
The MP series includes a wide range of automatic multipackers, for the packing of various products in die-cut cardboard sleeves.
Being designed to offer great flexibility, the MP series allows to handle many different pack collations and provides outputs up to 300 packs per minute.
Products can be packed either in 'over the top' or in 'neck through' style.
Options to fold and form top gusseted retaining flaps are available, so that products can be better contained into the pack.
Pack formation is carried out in-line through smooth and continuous motions.In addition the hot melt sealing process ensures complete pack integrity, rigidity and stability.
At the multipacker outlet packs can be turned by 90° and divided into different rows, thanks to the RD pack turner/divider. This pack turner/divider can be installed on all machines of the MP series.
|
|
|
|
|
|
In any industry, it has become necessary to innovate and streamline production processes to create better and more efficient workflows. Increasing demands, newer technologies, and more competition means, to stagnate is to lose out. The field of packaging is no different, and is a dynamic, ever-changing area of great potential and progress. It is in this vibrant atmosphere that Pam-Pac has moved to the forefront with unique packaging solutions offered through a range of blister-packing and cartoning machines for pharmaceutical as well as nonpharmaceutical applications.
The Sleeve Cartoning machine designed & developed by Pampac, enables insertion of blisters into a sleeve, without end closures or tuck-in flaps. Its detailed features are as follows:
Features
- No changeover parts are required for different blister sizes; it is a Universal machine
- As an option, the machine can be offered with a stainless steel finish
- The Magazine holds upto 1500 cartons.
- Verifies bar code or any other special code recognition.
- Rejects unacceptable cartons
- Minimal change-over & setup time.
- Visible product path.
|
|
Sleeving
Serie MP
Carton sleeving machines for packaging of single or multiple products-medium-high speed.
|
|
CARTON WRAPPING MACHINE CRW6K
A wrap around sleeve machine for wide variety of products.
Capacity : up to 120 packages/minute
|
|
TRAYBOX 007
Output: 11 trays/minute
TRAYBOX 007 is studied to insert the blister in trays. Its functions are:
1. to open the trays edges. It is took from its magazine;
2. to insert the blister in the trays;
3. to open and close the cover directly on the trays with hot-melt glue.
TRAYBOX 007 is adapted to packed the blister with base "small and big side", thanks to an automatic change format that permits an easy and quick operation.
It guarantees high productivity, little maintenance and the aesthetic of the production lines.
|
|
| ... products without technical information |
| |
|
Modern cutting techniques produce a wide range of harmful by-products (water, dust, chips and shavings...). ASP covers are made of industrial fabrics specially designed to resist such conditions. They are tailor-made specifically to fit into this work environment perfectly.
|
|
|
ASP’S WASHABLE COVERS are made of industrial fabrics coated on one side only. This ensures that they can be successfully washed (in water or solvent) and thus used for a number of years. Satisfying your detailed requirements in full, our tailor-made design ensures maximum efficiency without restricting the robot’s movements in any way. The covers can be changed (taken off and refitted) quickly, with no tooling required. This enables you to maintain high productivity. The covers we supply all meet the acceptation criteria for paint-shops in full (no silicon-type non-stick agents…).
|
|
ASP'S FOUNDRY COVERS are made of special (aramid-based) coated industrial fabrics. These coatings give the complex used the required mechanical and heat-resistant properties to operate satisfactorily in the conditions generated in foundry-work (high fire rating, tear resistance...) The covers are made-to-measure and used covers repaired in our workshops to make sure your robots always have optimum protection.
|
|
MECHANICAL HANDLING
--------------------------------------------------------------------------------
The environments in which mechanical handling robots work very considerably. Thanks to over 18 years experience in all sectors of industry, ASP offers the perfect protection for your robots that will take your specific conditions fully into account: environment, operating times, on-site washing...
|
|
ASP'S WASHABLE COVERS are made of industrial fabrics coated on one side only. This ensures that they can be successfully washed (in water or solvent) and thus used for a number of years. Satisfying your detailed requirements in full, our tailor-made design ensures maximum efficiency without restricting the robot's movements in any way. The covers can be changed (taken off and refitted) quickly, with no tooling required. This enables you to maintain high productivity. The covers we supply all meet the acceptation criteria for paint-shops in full (no silicon-type non-stick agents...).
|
|
ASP "High Tech"covers are made using technical fabrics with specific coatings. The "tailor-made" design provides maximum efficiency without limiting robot movements. The time required to replace a cover remains compatible with your productivity. The covers in our material TNCA or NEOLIS offer you the following advantages :
Excellent level of resistance in food grade processes (and especially daily washing).
Washable cover on the robot.
Ventilated or pressurized cover.
Our material TNCA : according to the FDA 21 CFR Ch. 1 list (4.1.1996 Edition) § 177.2600.
Our material NEOLIS : according to the FDA 21 CFR Ch. 1 list § 177.1600.
|
|
The ASP covers in our material Neolis/TNCA are suitable for contact with foods (FDA)
ASP "High Tech"covers are made using technical fabrics with specific coatings. The "tailor-made" design provides maximum efficiency without limiting robot movements. The time required to replace a cover remains compatible with your productivity. The covers in our material TNCA or NEOLIS offer you the following advantages :
Excellent level of resistance in food grade processes (and especially daily washing).
Washable cover on the robot.
Ventilated or pressurized cover.
Our material TNCA : according to the FDA 21 CFR Ch. 1 list (4.1.1996 Edition) § 177.2600.
Our material NEOLIS : according to the FDA 21 CFR Ch. 1 list § 177.1600.
|
|
|
The environments in which mechanical handling robots work very considerably. Thanks to over 18 years experience in all sectors of industry, ASP offers the perfect protection for your robots that will take your specific conditions fully into account: environment, operating times, on-site washing…
|
|
|
The very different requirements created by the various welding techniques mean that specific products have to be specially developed. The industrial fabrics we use have specific coatings that leave the cover flexible but resist spatter and welding projections. Their para-aramid base has excellent mechanical resistance. Whatever the technique you use: arc welding, spot welding, laser welding... ASP has the perfect cover specially adapted to your exact situation.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
