|
|
|
|
|
|
Roberts Sinto's SCC Core Center revolutionizes core production. The SCC Core Center uses the most advanced technology in core machine processing to produce intricate cores from a few ounces up to 130 lbs.
Controls:
- PLC Controls
- Touch Screen
- Diagnostics
- Linear Transducers
The SCC Core Center controls allow the complete operation, set-up and machine monitoring from a single touch screen control mounted on the front of the enclosure. All major operations are hydraulic and are controlled by linear transducers providing fast, accurate operation.
Continuous Clamping of Core Box
The SCC Core Center continuously clamps the core boxes during the core making process. The blow head and gassing head are moved to the core box, keeping the mechanism simple and reducing the possibility of finning.
Special Air Flow Fluidizing Blow Chamber
The special blow chamber fluidizes the sand allowing the operator to make high-density intricate cores. The SCC Core Center will blow cores from a few ounces up to 130 lbs.
Horizontal / Vertical Core Boxes with Quick Change
The SCC Core Center can use both horizontal and vertical core boxes. A vacuum clamping system allows the SCC Core Center to use existing tooling and simplifies set-up.
Total Self-Contained System
The SCC Core Center is a complete system including mixer and gas generator, all contained in an environmentally friendly system
|
|
Hot Box
Please call or see a Roberts Sinto representative for information on our many Hot Box Core equpiment machines.
|
|
FRITZ HANSBERG manufactures a full range of high-volume core machines for all cold-box and hot-box processes.
Available with shoot chamber capacity from 5 to 300 l, these high-performance, world-class machines are truly built for the foundry, designed and manufactured to be employed on a continuous basis for 6 days/week, 24 h/day.
DV / R Series
- Vertical core box split
- Production rate up to 300 cycles/h
- Core box clamping between shooting and curing
- Five stations allowing for the use of up to five different core boxes
- Core removal on take-out belt
- Cold-box versions (all processes)
|
|
CORE-SHOOTING MACHINES
Core-shooting machines for cold-box, hot box and shell moulding processes. Shooting head capacity from 12 to 120 l for vertically or horizontally-split core boxes, single or multiple stations
|
|
· Universal machine for jobbing foundries
· Flexible, fast, and extremly reliable
· For cold core hardening processes
· Shoot volume from 10 to 150 liters
· Accepts vertical & horizontal tooling up to six parts
· Rapid and simple tooling change - over by means of vacuum clamping system
· Hydraulic system for very high closing force
· Computer interface with automatic error diagnostic funtion
· Average machine cycle time from 10 sec. (without gassing, shoot, exhaust)
|
|
Cold Box-High Repetition
- Integral PLC control panel with remote operator panel
-Height adjustable core belt with cotinuous rotation of forward / backward movement.
- Facility to activate loose pieces
- Automatic spray release agent and box cleaning function (optional)
-Integral gas generator for Amine, Methl Formate or CO2
|
|
|
model SPAR 5 - SPAR 7 - SPAR 10 - SPAR 20 - SPAR 30: completely automatic, with capacity from 5 up to 30 litres, these machines are the ideal solution for the production of large cores runs. They are designed to ensure high quality production, working safety, silent operation and easy maintenance. The finished cores are ejected onto the discharge belt, which indexes forward on every shot, to bring the cores outside the machine. They are available as the basic model or complete with various optional devices, suitable to the customer's requirements.
|
|
FRITZ HANSBERG manufactures a full range of high-volume core machines for all cold-box and hot-box processes.
Available with shoot chamber capacity from 5 to 300 l, these high-performance, world-class machines are truly built for the foundry, designed and manufactured to be employed on a continuous basis for 6 days/week, 24 h/day.
SF Series
- Horizontal core box split
- Production rate up to 120 cycles/h
- Multiple stations
- Core removal on take-out belt or forks
- Hot-box versions (gas and electrical
|
|
Automatic core blowing machine with side-thrust vertical split of the core box, including moulding station, based on the Shell-Moulding process.
It is designed in particular to produce cores such as pump impellers and ventilated brake discs.
The machine is equipped with a round spray reservoir and blowing head cooling system.
The pneumatically-powered automatic loading system also includes a loading hopper.
The mobile support, attached to the half-box containing the core, is equipped with a device to overturn it onto the belt using cylinder-driven extractors. Heating is generated by an independent burner frame for each half-box, fed by an air and gas mix (LPG or NATURAL GAS) with heat regulation.
The machine is equipped with a 24V control panel for manual or automatic operation in a single or continuous cycle.
From the protective booth the operator can access the machine while maintaining the safety level established by CE regulations.
|
|
Hot Box Core Shooters
• Hydraulically or pneumatically operated
• Electric heating system
• SBucket elevator for automatic sand fill
• Height adjustable core discharge belt
• Water cooled head and heated plates
• PLC control
• Independent temperature control on both plates
• Facility to control loose plates
|
|
|
|
|
|
Low voltage moulded case circuit breakers are used for the switching and protection of power supply cables, motors
and other electrical equipment against overloads and short circuit faults. It provides, beside protection function other
functions as remote ON/OFF operation, undervoltage protection, main switch, ...
They are available in range from 16 A up to1600 A in 3 and 4 pole versions.
Advantages:
- Small dimensions,modular sizes
- Possibility of field-instalable accessories - up to 630 AF series 2
- High short circuit breaking capacity (up to 100 kA)
- Fast break mechanism (F.B.M.)
- Reduced energy let throught I2t - minimises thermal stresses
- Reduced tripping time - minimises damage after fault
- Reduced peak short current ampacity - minimised electrodynamic stresses on conductors and
protected equipment
- Installation on mounting plate, 125 AF also on DIN-rail
- Wide range of accessories
- Compact design with high mechanical strenght
- High withstand voltages (8 kV a.c.)
- Voltage level up to 690 V a.c. and 250 V d.c. - only MCCB's with thermal-magnetic triping unit
- Direct opening - recommendation according to standard IEC 60204-1 - up to 630 AF series 2
- Common internal accessories - up to 630 AF series 2
- Visual safety
- Unsurpassed flexibility
|
|
|
SN moulded case circuit breakers are used for switching and protecting low-voltage installations in larger residential properties and business as well as industrial buildings. They ensure reliable protection against overload and short circuits, and can also be used as a main disconnection switch. Rated currents of SN moulded case circuit breakers are in the range from 16 A to 1600 A.
|
|
|
|
|
|
Record Plus™ Thermal Magnetic Trip
3 to 100A. The FC100 and FB100 Record Plus breakers provide a new standard of performance offering multiple levels of interruption capacities, global code approvals, compact size, dual AC/DC ratings, and a broad range of accessories.
Record Plus™ Electronic Trip
125 to 600A. The FG600 Record Plus breaker offers the highest short circuit ratings in the industry, all in a traditional 400A frame.
Spectra RMS™ Electronic Trip
15 to 1200A. These industrial SE150, SF250, SG600 and SK1200 breakers have a digital, solid state, RMS sensing trip system with field installable, front-mounted rating plugs to establish or change the breaker ampere rating.
Thermal Magnetic
15 to 1200A. Our industrial thermal magnetic E150, F225, J600 and K1200 breakers provide a proven, cost effective solution.
Mag-Break® Motor Circuit Protector
Magnetic only circuit breakers. Available in frame types E, F, J, K, and Tri-Break.
Lighting Circuit Breakers
15 to 100A. TEY breakers available with plug-in or bolt-on mounting options.
|
|
|
|
|
|
The majority of distribution systems are designed to an ultimate circuit rating (lcu). An lcu rated MCCB provides the optimum protection in terms of safe and economical selection.
Certain applications may require protection wich is designed to the more onerous service short circuit rating (lcu).
Terasaki's TemBreak Plus range can provide a wide choice of MCCBs with superior lcs ratings up to 85kA at 440V AC.
lcu=o-co 2 full short circuits
lcs=o-co-co 3 full short circuit
All TemBreak Plugin and drawout MCCBs are fitted with a safety trip as standard. If an attempt is made to remove an MCCB while ON it will automatically trip.
The neutral pole of all TemBreak MCCBs are of early make / late break design. This eliminates the risk of abnormal line to neutral voltages which may damage sensitive electronic equipment.
TemBreak MCCBs from 125AF to 1600AF are suitable for isolation as defined by IEC 947-2. Positive Contact Indication (PCI) is achieved via the toggle mechanism. Padlocks can only be installed if the contacts are fully open or closed.
|
|
RCCB Record Plus: FD63/160 frame size
Rated at 160A, the FD63/160 frame size is designed for use in both a DIN-rail environment with modular equipment and in industrial applications. It is supplied with IPXXB terminals suitable for direct connection of one or two conductors totalling up to 95 mm² and is available as a thermal-magnetic breaker, a moulded case switch, and as a magnetic-only motor circuit protector.
The FD63/160 bridges the gap between residential miniature circuit breakers and industrial moulded case circuit breakers.
In compliance with EN 60947, BS, VDE, UTE, KEMA, CEI
3 and 4 pole versions available
FD63 to 63A and FD160 to 160A
Full range of add-on accessories, including:
thermal magnetic/magnetic trip units
auxiliary contacts
completely integrated add-on devices available
rotary handles
electrical operators
connectivity - 60 mm system
|
|
1. General
Meta-MEC MCCBs shall comply with IEC 947-1 and 947-2 standards or with the corresponding standards applicable in the
member countries (EN 60 947-1, 2) :
- Rated operational voltage of 600 V AC (50/60 Hz)
- Rated insulation voltage of 690 V AC (50/60 Hz)
- Suitable for isolation, as defined by IEC 947-2
- ISO 9000 standard.
2. Types & Ratings
- AB type, GB type, UL listed type
- It covers all ratings from 3A to 1600A.
3. Application
- Line protection
- Motor/generator protection
- Starter combination
4. Type of trip unit
- Thermal-magnetic release
- Electronic release
- Hydraulic-magnetic release
- Magnetic release only without thermal trip
5. Certification: KEMA CB certification, CE document of conformity, UL, CCC
|
|
630 A to 3200 A moulded case circuit-breakers
Description
Nominal current from 630 to 3200 A
2 breaking capacities:200kA at 440V - 75kA at 690V for 630 and 800A LB frames
4 breaking performances from 50 to 150 kA at 415 V
Voltage rating:up to 690 V
2 physical sizes from 630 to 3200 A
A single pole pitch of 70 mm
3 and 4-pole versions
solation with positive break indication
4 Micrologic control units enriched by measurement, energy management and network analysis functions
Earth leakage protection built into electronic protection Wide range of common auxiliaries and accessories interchangeable on site
Compliance with international standards IEC 60947-1 and 2, IEC 68230 for type 2 tropicalisation
Compliance with specifications of marine classification companies:Bureau Veritas, Lloyd’s Register of Shipping, Det Norske Veritas, etc.
|
|
|
|
|
|
The TemBreak series offers the models of the 800A to 1600A frames with the breaking capacity up to 125 kA, and this series consists of thermal adjustable type and electronic type that allows you to select the most suitable breaker for your system
Features of the TemBreak Electronic Moulded Case Circuit Breaker:
- Long time delay trip, short time delay trip, and instantaneous trip are available as standard.
- All of long time delay trip, short time delay trip, pretrip alarm, and ground fault trip can be adjusted. The rated current can be adjusted in a range between 50% and 100%. For short time delay trip, ramp characteristics can be selected with the switch to enable selective coordination with lower breakers and fuses.
- The multi-protective device uses the r.m.s. value control. It samples peak current every 0.5msec. to calculate a root-mean-square value. Therefore, harmonics up to 19 th harmonic are accurately detected at 50 Hz to prevent any malfunction from occurring due to harmonics.
|
|
| ... products without technical information |
| |
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
Pneumatic rope balancer with special double fork handling attachment, with adjustable width, provided with mechanical locking of the handled part. Properly designed to handle metallic and/or plastic boxes and cases.
Available also in version with rotating device for the emptying of the contents.
Max capacity 80 kg.
|
|
Pneumatic linear manipulator with pneumatic gripping tool for parcels of ceramic tiles or for any part that can be gripped pushing on the sides.
Max capacity 200 kg.
Max work radius 7 m.
Max vertical stroke up to 2100 mm.
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
Pneumatic manipulating model Standard with tool of taken for movement bags
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of an endowed manipulating of a system of taken flowing along the revolving and equipped arm of vertical movement through a detail is arranged of raising of the product. The solution is the ideal for who must enliven similari bags or products quickly (as an example scato them). The taken one happens through a ventosa and successively the product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is available on autostabile base and fixed column.
The maximum capacity 65 kg
Range 4000 milimeter
|
|
|
The manipulator with cable makes it possible to handle paperboards going from 0 to 300 kg with a suction cup gripping while optimizing the operating areas available, in perfect ergonomics and in full safety for the men and the material.
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support
|
|
| ... products without technical information |
| |
 see the results for the following category : Dump trucks |
|
|
