|
|
|
|
|
|
Roberts Sinto's SCC Core Center revolutionizes core production. The SCC Core Center uses the most advanced technology in core machine processing to produce intricate cores from a few ounces up to 130 lbs.
Controls:
- PLC Controls
- Touch Screen
- Diagnostics
- Linear Transducers
The SCC Core Center controls allow the complete operation, set-up and machine monitoring from a single touch screen control mounted on the front of the enclosure. All major operations are hydraulic and are controlled by linear transducers providing fast, accurate operation.
Continuous Clamping of Core Box
The SCC Core Center continuously clamps the core boxes during the core making process. The blow head and gassing head are moved to the core box, keeping the mechanism simple and reducing the possibility of finning.
Special Air Flow Fluidizing Blow Chamber
The special blow chamber fluidizes the sand allowing the operator to make high-density intricate cores. The SCC Core Center will blow cores from a few ounces up to 130 lbs.
Horizontal / Vertical Core Boxes with Quick Change
The SCC Core Center can use both horizontal and vertical core boxes. A vacuum clamping system allows the SCC Core Center to use existing tooling and simplifies set-up.
Total Self-Contained System
The SCC Core Center is a complete system including mixer and gas generator, all contained in an environmentally friendly system
|
|
Hot Box
Please call or see a Roberts Sinto representative for information on our many Hot Box Core equpiment machines.
|
|
FRITZ HANSBERG manufactures a full range of high-volume core machines for all cold-box and hot-box processes.
Available with shoot chamber capacity from 5 to 300 l, these high-performance, world-class machines are truly built for the foundry, designed and manufactured to be employed on a continuous basis for 6 days/week, 24 h/day.
DV / R Series
- Vertical core box split
- Production rate up to 300 cycles/h
- Core box clamping between shooting and curing
- Five stations allowing for the use of up to five different core boxes
- Core removal on take-out belt
- Cold-box versions (all processes)
|
|
CORE-SHOOTING MACHINES
Core-shooting machines for cold-box, hot box and shell moulding processes. Shooting head capacity from 12 to 120 l for vertically or horizontally-split core boxes, single or multiple stations
|
|
· Universal machine for jobbing foundries
· Flexible, fast, and extremly reliable
· For cold core hardening processes
· Shoot volume from 10 to 150 liters
· Accepts vertical & horizontal tooling up to six parts
· Rapid and simple tooling change - over by means of vacuum clamping system
· Hydraulic system for very high closing force
· Computer interface with automatic error diagnostic funtion
· Average machine cycle time from 10 sec. (without gassing, shoot, exhaust)
|
|
Cold Box-High Repetition
- Integral PLC control panel with remote operator panel
-Height adjustable core belt with cotinuous rotation of forward / backward movement.
- Facility to activate loose pieces
- Automatic spray release agent and box cleaning function (optional)
-Integral gas generator for Amine, Methl Formate or CO2
|
|
|
model SPAR 5 - SPAR 7 - SPAR 10 - SPAR 20 - SPAR 30: completely automatic, with capacity from 5 up to 30 litres, these machines are the ideal solution for the production of large cores runs. They are designed to ensure high quality production, working safety, silent operation and easy maintenance. The finished cores are ejected onto the discharge belt, which indexes forward on every shot, to bring the cores outside the machine. They are available as the basic model or complete with various optional devices, suitable to the customer's requirements.
|
|
FRITZ HANSBERG manufactures a full range of high-volume core machines for all cold-box and hot-box processes.
Available with shoot chamber capacity from 5 to 300 l, these high-performance, world-class machines are truly built for the foundry, designed and manufactured to be employed on a continuous basis for 6 days/week, 24 h/day.
SF Series
- Horizontal core box split
- Production rate up to 120 cycles/h
- Multiple stations
- Core removal on take-out belt or forks
- Hot-box versions (gas and electrical
|
|
Automatic core blowing machine with side-thrust vertical split of the core box, including moulding station, based on the Shell-Moulding process.
It is designed in particular to produce cores such as pump impellers and ventilated brake discs.
The machine is equipped with a round spray reservoir and blowing head cooling system.
The pneumatically-powered automatic loading system also includes a loading hopper.
The mobile support, attached to the half-box containing the core, is equipped with a device to overturn it onto the belt using cylinder-driven extractors. Heating is generated by an independent burner frame for each half-box, fed by an air and gas mix (LPG or NATURAL GAS) with heat regulation.
The machine is equipped with a 24V control panel for manual or automatic operation in a single or continuous cycle.
From the protective booth the operator can access the machine while maintaining the safety level established by CE regulations.
|
|
Hot Box Core Shooters
• Hydraulically or pneumatically operated
• Electric heating system
• SBucket elevator for automatic sand fill
• Height adjustable core discharge belt
• Water cooled head and heated plates
• PLC control
• Independent temperature control on both plates
• Facility to control loose plates
|
|
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
Pneumatic linear manipulator with pneumatic gripping tool for parcels of ceramic tiles or for any part that can be gripped pushing on the sides.
Max capacity 200 kg.
Max work radius 7 m.
Max vertical stroke up to 2100 mm.
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
Pneumatic manipulating model Standard with tool of taken for movement bags
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of an endowed manipulating of a system of taken flowing along the revolving and equipped arm of vertical movement through a detail is arranged of raising of the product. The solution is the ideal for who must enliven similari bags or products quickly (as an example scato them). The taken one happens through a ventosa and successively the product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is available on autostabile base and fixed column.
The maximum capacity 65 kg
Range 4000 milimeter
|
|
|
The manipulator with cable makes it possible to handle paperboards going from 0 to 300 kg with a suction cup gripping while optimizing the operating areas available, in perfect ergonomics and in full safety for the men and the material.
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support
|
|
| ... products without technical information |
| |
|
|
|
|
FlexLink offers a wide assortment of aluminum profiles and accessories such as connectors, fasteners, feet, etc to build machine frames and safety enclosures. Pre-assembled enclosure sections and sliding door profiles as well as linear units are also available.
Structural system XC (module 44 mm)
Structural system XC is based on aluminium beams with T-slots for easy interconnections and attachment of external devices. The system is based on the 44 mm module. Beam sizes in the XC system range from 24x24 mm up to 176x88 mm.
The system offers sturdy components which provide high load capacity for both static and linear motion systems. It is used within a wide range of applications, from frameworks, workbenches and enclosures to special machinery, pick and place units and gantry robots.
Structual system XF (module 30 mm)
Structual system XF consists of a range of standard components with emphasis on enclosure applications based on the 30 mm module. It includes two basic beam types, the support beams (XFBM) in cross-sectional dimensions 30 mm x 30 mm and 30 mm x 60 mm as well as several enclosure beams (XFEB) intended for enclosure frameworks. The system also includes other components for enclosures, including hinges, handles, strips for nets and panels, etc.
|
|
aluminum framing for factory automation
We can offer the best China-made aluminmum extrusion profile and accessories of MODULAR ASSEMBLY SYSTEM, including 20mm, 30mm, 40mm,45mm,50mm,60mm profile and connection elements, fasteners(t-nuts, t-bolts, subsequent nuts etc.), leveling feet, hinges.
We have ten years experience in this field and got a well reputation in Chinese market. Since the year 2008, we begin to step into International market. International quality, Chinese prices, believe that we can bring to you more suprise.
|
|
Need a special configuration, size, or color? It's easy to convert your specs to reality with customizable features from Zero Manufacturing. Our modified stock cases and complete custom designs represent the most diverse options for the optimal protection of your products.
Zero Manufacturing is the leading source for customizable commercial, industrial, and military cases. Offering over 100,000 pre-tooled sizes of deep drawn enclosures of virtually unlimited sizes and configurations, Zero's varied aluminum products can be customized and modified with processes such as drilling, laser cutting, riveting, welding, brazing and so much more. Custom accessories are also available for many of Zero's products to meet your individual requirements, contact us for more information.
|
|
MADE-TO-MEASURE TELESCOPIC COVERS
7000 types of protective covers already available
All models of covers, all brands of machines
Horizontal, vertical, rail, double axis protection…
Measurements carried out on machine or on model
Made-to-measure telescopic cover supplied in 4 weeks
12-month guarantee
RECONDITIONING SERVICE :
Our teams take over your current worn or even damaged cover and we guarantee complete reconditioning within 3 DAYS.
40 to 60% less expensive than purchasing a new cover Water-tightness,
Guiding, sizing, finishing…
Technical improvement of original cover Complete reconditioning in less than 1 week Minimum guarantee 6 months.
|
|
Realization to measure of frames and cartérisations of machines starting from the sections aluminum. By combination of basic elements, of connection on the ground and fixings of panels, it is possible to create the protections in conformity with the safety regulations standards or adapted to the specifications of the users.
Possibility of carrying out doors beating, sliding, or guillotines with electric safety or not.
Delivery in kit or assembly.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
