|
|
| The range presented in this chapter consists of centrifugal double inlet fans. In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements. |
|
| The range presented in this chapter consists of backward curved centrifugal fans. In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements. |
|
| The Euromate fan range consists of high quality single and central fans and a portable fan for welding operations in confined spaces. The installation of a single fan to each extraction arm guarantees an optimum extraction. Central fans are designed for central installations serving several extraction arms. Central fans can be used for 3 to 15 extraction arms. |
|
| This essential component to carry outside warm combustion smoke from pellet fireplaces, is driven by an high-performance external rotor fans, enable to maintain long-life operational stability. The fan offers fair silence and the tachometer to control fan speed. |
|
| PlymoVent's TEV-series fans are design to be used as central fans. These fans are equipped with a light weight aluminium impellers, suited to exhaust gases, volatile fumes and dust. Matched inlet and outlet areas provide, together with the optimized impellers, an even air flow, higher capacity and lower noise level. |
|
ACI's Slimline Range
This range of ultra-compact slimline fans is used extensively in the OEM industrial sector, where space is at a premium. These innovative designs use ‘inside out’ motor driven forward-bladed impellers allowing dimensions to be kept to a minimum.
- Performance Figs: Flow rates up to 1000M³/Hr (600CFM)
- Pressures up to 7.5 mBAR (3 In.SWG)
- Other Features: A comprehensive range of accessories is available, for example, speed controllers can be fitted
- Volume or specialised bespoke available
- Full design and testing facilities, including airflow and noise testing
|
|
Centrifugal Fans & Blowers
These are curved forward bladed centrifugal fans, available in single or three phase, DC or 400Hz, and ATEX versions. Additionally speed controllers can be fitted and heat spinners can be supplied to withstand temperatures of up-to 150 ºc.
Our centrifugal blowers have forward and backward curved blades, single and double inlet, with or without housing, ideal for general extraction and cabinet cooling applications.
- Flow rates up to 4000M³/Hr (2350CFM)
- Pressures up to 15 mBAR (6 In.SWG)
- Available in single or three phase, DC or 400Hz, and ATEX versions
- A comprehensive range of accessories is available, for example, speed controllers can be fitted and heat spinners can be supplied to withstand temperatures of up-to 150 ºc.
- Volume or specialised bespoke available
- Full design and testing facilities, including airflow and noise testing
|
|
CS series, MS series, and FMS series
Futural: ventilation, cooling and drying application for oven, plastic, printing and other industries.
Selling individually is available for all fan parts.
SSD series
Futural: for indoor and kitchen ventilation, cooling, and drying |
|
Lightweight devices that can be collapsed and easily moved
With 12 V drive, independent operation possible (integrated batteries)
Easily transportable on HGVs delivering pellets |
|
VMI MANN
VMI 07 - VMI 15
DESCRIPTION:
IN-LINE fans in a soundproof box
Airflow: 1.170 - 10.000 m3/h
APPLICATIONS:
- General ventilation.
- Stuffy environments renewal.
- Parkings. |
|
Impeller diameter for AC-input: 50mm - 160mm
Impeller diameter for DC-input: 80mm - 120mm
Air capicity 0.21m³/min - 9m³/min
Static pressure 37Pa - 686Pa
AC-input: 200/220/230V AC or 100/110/115V AC
DC-input: 24V DC
Marking: CE, UL and cUL
|
|
Installation/air circulation fans
No housing to save space
Must be integrated into machinery
Easy installation with motor flange
The illustration below depicts a special design -
ATEX model with mounting frame |
|
Centrifugal channel fans EPK / DPK for commercial use: durable, powerful and robust
For air extraction
· Commercial premises
· Workplaces
· Showrooms
· Production facilities
· Industrial buildings
High degree of protection IP55
Installation in rectangular ventilation channels
Galvanised housing with externally fitted terminal box
Flange profiles fitted on the inlet and outlet sides
Single phase AC version (EPK) and three-phase AC version (DPK)
Air flow volume up to 6,500 m³/h
|
|
| The range presented in this chapter consists of centrifugal impellers (TRE) and fans in steel scroll (GRE - GRF). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements. |
|
Space-saving
1 drive operates two fans
Our fans can be supplied with the following drives:
Wide range voltage for 50/60 Hz operation
Single-phase alternating current, three-phase alternating current
Dual-speed drives
Direct current drives
External rotor drives
Hydraulic drives
Frequency converter drives
CSA/UL drives |
|
| The range presented in this chapter consists of centrifugal double inlet fans. In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements. |
|
ACI is helping its customers to meet their end-user obligations to purchase compliant equipment with its range of small industrial fans and blowers.
Fans are manufactured from stainless steel, galvanised steel or aluminium – consideration should be given to any aggressive substances in the explosive atmosphere with regard to the material used in the manufacture.
For marine applications special paint finishes are also available.
- Flow rates of 10 to 4500m ³/hr (30 to 2659CVM)
- Pressures from 1 to 42in.SWG
- Increased Safety Motors (EExe)
- Flameproof (EExd)
- Non Sparking (Ex N)
- A comprehensive range of accessories
- Full design and testing facilities, including airflow and noise testing
|
|
DESCRIPTION:
IN-LINE fans in a soundproof box
Airflow: 1.170 - 10.000 m3/h
FUEL:
APPLICATIONS:
- General ventilation.
- Stuffy environments renewal.
- Parkings. |
|
Pressures of up to 8000 Pa
Noise control features
Frequency-adjustable
Energy-saving
Our fans can be supplied with the following drives:
Wide range voltage for 50/60 Hz operation
Single-phase alternating current, three-phase alternating current
Dual-speed drives
Direct current drives
External rotor drives
Hydraulic drives
Frequency converter drives
CSA/UL drives |
|
| The range presented in this chapter consists of centrifugal impellers (TRE) and fans in steel scroll (GRE - GRF). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements. |
|
ND range, low pressure blower
Cast aluminium blower housings, impellers made of galvanised steel sheet, maintenance-free squirrel cage rotor motors to IP 54. The blowers can be supplied in clockwise or anti-clockwise rotation. On demand speed
variable execution, 2-step speed variable, stepless with single phase, or speed variable execution by frequency converter. A variety of accessories include fine filters, connectors and throttle valves, base plate, etc. Special designs for specific applications, e. g. for higher media flow and ambient temperatures, with improved corrosion protection, with sealed housing parts, for special voltage and frequency as well as to enclosure IP 55
and thermal class F. |
|
- High-efficiency fans in all power ratings
- RBTP: Standard pulley/belt, transmission from 10 to 150 hp
- RB: Standard, transmission directly from end of motor shaft, 2 to 25 hp |
|
ALUMINIUM CENTRIFUGAL FANS
Centrifugal fans for continuous use in industrial processes like aireting, blowing off, pneumatic transport, furnace burners etc |
|
The fans are available in a wide range of designs and performance levels.
All units with a suction output of up to 3.000 m3/h are pre-cast in aluminium (delivery includes turnbuckle); units with at least 3.500 m3/h are supplied in sheet steel (delivery includes vibration absorber).
The statics and dynamics of every fan have been balanced to ensure that it runs quietly and smoothly.
As they are robustly built, the fans can be used for continuous service. |
|
Design Complete radial fans (motor attachment impeller housings [accessories]) Radial fans - integrated modules (motor [flange] impeller) For the 100 - 1,200 Pa pressure range and air volumes of 300 - 1,000 m3/h.
Main applications Heating branch, air conditioning/and drying technology, ovens, curing chambers
Special applications Railway technology, medicine technology, ventilation and extraction
Performance range 120 -750 W
Size 63 - 90 |
|
| The Secomak range of fans, blowers and exhausters offer high performance units that are both flexible and compact. These heavy-duty, high-quality units are suitable for a variety of industrial applications which include: drying, cooling, air-knife applications, heating, cleaning, pneumatic, conveying, aeration, fluidising, air-sampling, extracting, combustion air, vacuum lifting and holding. |
|
- Certified according to ATEX
- Suitable for use in battery-charging rooms, fume cupboards
and similar environments
- Compact design
EX fans can be installed in any position, and their compact design makes them easy to install.
These fans are powered by specially manufactured EXmotors, and have impellers with forward-curved blades. The fan casing is cast in silumin, and the impeller is manufactured from aluminium. |
|
With the ATEX-ND-range Elektror presents radial low pressure blowers in an explosion-proof design according to RL 94/9 EG.
These ex-proof low pressure blowers are applicable in ATEX-Categories 2G, 3G, 3GD and 3D for the zones 1, 2 and 22. Based on a technical check we also offer these ex-proof blowers for use inside and outside in different zones. The devices are available for temperature classes T3, T4 and T 125°C, as well as for the types of ignition protection EEx e and EEx de. Among 50 Hz applications there are solutions available for 60 Hz. The technical data are identical to the standard Elektror low pressure blowers without explosion proof.
For this reason our ATEX-range offers the same top quality to our customers Elektror is known for for a long time.
In our radial blowers for use in explosive areas the new standard EN 14986 is consequently realized.
Further designs and versions as well as useful accessories are available. Please also contact our Customer Support (support@elektror.de). |
|
With the ATEX-RD-range Elektror presents radial medium pressure blowers in an explosion-proof design according to RL 94/9 EG.
These ex-proof medium pressure blowers are applicable in ATEX-Categories 2G, 3G, 3GD and 3D for the zones 1, 2 and 22. Based on a technical check we also offer these ex-proof blowers for use inside and outside in different zones. The devices are available for temperature classes T3, T4 and T 125°C, as well as for the types of ignition protection EEx e and EEx de. Among 50 Hz applications there are solutions available for 60 Hz and for frequency convertible versions. The technical data are identical to the standard Elektror medium pressure blowers without explosion proof.
For this reason our ATEX-range offers the same top quality to our customers Elektror is known for for a long time.
In our radial blowers for use in explosive areas the new standard EN 14986 is consequently realized.
Further designs and versions as well as useful accessories are available. Please also contact our Customer Support (support@elektror.de). |
|
You van rely on us for the following centrifugal fans:
- standard single inlet fans
- standard high pressure fans
- synthetic fans
- double inlet fans
- rooftop fans
- special fans
- oven circulators
The standard models of these fans come with very short terms of delivery. |
|
|
|
