|
|
Series 9000P-O
Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.
The broad, versatile line includes models with rugged housings of polypropylene that stand up to strong chemical herbicides. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.
|
|
Varisco self-priming pumps use recirculation of liquid in the pump casing to remove air from the suction line, enabling the pump to draw liquid through the suction line.
The pump suction port incorporates a check valve which retains liquid in the casing when the pump is stopped so that it will be ready to pump immediately when started up the next time. |
|
These pumps are suitable for transferring liquids containing impurities measuring up to 30 micron.
The hydraulic components, namely the brass scroll, the bottom in cast iron and the aluminium pump body, allow the pumps to be used with emulsions, oily substances and liquids in general as long as they are not oxidative for construction materials.
Viscosity must not exceed 3° Engler (21 CST).
They must be installed at the top of the tank and must be primed before use.
If the pump sucks in air due to lack of liquid, priming must be repeated.
To ensure a long life for the pump, never let it turn when it is dry since the mechanical seal is not self-lubricated.
|
|
| Horizontal axle, self-priming pumps for chemicals, without the aid of bottom valve, with the possibility to install a trolley (ZMA). Executions with single or doubled flushed mechanical seal. Negative suction head according to the fluid characteristics (specific gravity, vapour tension) with a maximum of m. 4,4. Close-coupled construction for ZMA and long-coupled for the ZGA. |
|
PERFORMANCE AND WORKING LIMITS
- Capacity up to 62 l/min (3.7 m3/h)
- Total Head up to 68 m
- Max. Suction lift up to 9 m
- Max. Pressure 10 bar |
|
Features:
Capacity: 10 - 400 3/h
Heads: 10 - 110 mlc
Liquids pumped: fresh water, seawater, irrigation and drainage
or equivalents
|
|
Varisco self-priming pumps use recirculation of liquid in the pump casing to remove air from the suction line, enabling the pump to draw liquid through the suction line.
The pump suction port incorporates a check valve which retains liquid in the casing when the pump is stopped so that it will be ready to pump immediately when started up the next time. |
|
This extensive range of side-channel pumps are available in various designs including:- Horizontal or vertical, self-priming and some of a segmental construction.
The pumps are able to handle entrained gases and liquids which in some cases contain solid or abrasive matter.
PERFORMANCE
- capacity up to 35 m3/h.
- delivery head up to 354 m
FEATURES & BENEFITS
- self –priming.
- gas handling.
- performance curve characteristics.
- pumping liquids under critical physical
- high wear-resitant materials
- high efficiency
- low NPSHR value
- modular hydraulic system |
|
Applications:
Surface treatment
Transfer of chemicals
Agitation of chemical tanks
Cosmetics industry
Salt water
Metallurgy
Vertical design: Assembly immersed in bath
Pump body made of injected plastic (Polypropylene or PVDF) Excellent resistance to strong acids and bases
Max. fluid temperature = 80°C (PP), 110°C (PVDF)
Closed centrifugal pump impeller with diffuser:
Very good efficiency
Max. flow rate up to 23 m3/h
Max. pump-out height up to 19 m
Impeller driven by a back-balanced, bearing-less drive shaft (T50/200 and T72/202) No gaskets ; no risk of leaks
No wearing parts
Impeller driven by a long drive shaft with ceramic / ceramic bearing (T101/201): No gaskets ; no risk of leaks; Drive shaft height up to 756 mm
Version with counter-impeller (T72/242) Operation possible outside bath
|
|
| Centrifugal long-coupled sump pumps with column and pump body submerged in the pumped liquid; suction depth up to 3000 mm. Over the 2000 mm is installed an intermediary guide for the shaft additionally to the guide already present at the pump body level. The bearings are realized with ceramic Oxides and PTFE reinforced. In case of liquids with middle abrasive solids, the bearings can optionally be flushed with an external clean liquid. External different vapour seal systems to protect the upper mechanical parts from the corrosion, are optionally available . The KGS range, with maximum suction depth of mm. 800, is without guide for the shaft to favour the transport of either middle abrasive or with particles liquids. |
|
Major Applications
Power Plant :
- Cooling Water Pump
- Circulating Water Pump
- Seawater Lift Pump
Desalination :
- Seawater Intake Pump
- Brine Recirculation Pump
- Brine Blowdown Pump
- Distillate Pump
- Irrigation and Drainage Pump |
|
Characteristics
Multi-stage vertical centrifugal pumps with diffuser type bowl.
Francis vane enclosed impellers.
Counter clockwise rotation viewed from coupling end (as an option).
Basket or Conical strainer according to pump requirements.
Design Features
Product or Oil lubricated.
Large bowl shaft sizing provides longer life.
Enameled bowls 5" thru 15". |
|
Features:
- Polypropylene wet end
- Capacitor inside the terminal box
- High performance mechanical seal
- 8 outlet positions
- 5 terminal box positions
- 3 pump purge positions (optional)
- Single and three phase voltages 50Hz or 60 Hz
Performances:
Flow rate with a ø120mm impeller at a discharge pressure of 2 bar:
- 560W motor : 2 m³/h
- 900W motor : 3,5 m³/h
- 1150W motor : 4 m³/h
Consult performance curves in the data sheet to know the nominal flow rate according to the chosen operating point. |
|
RPP type pump manufactured according to API 610
Horizontal single stage end suction volute casing pump manufactured according to API 610 standard.
Fields of application:
Oil industry, Petrochemical industry, Shipbuilding, Energy plants, Sugar and salt industry, Cooling systems, Food industry
Operating data:
Q = up to 800 m3/h
H = up to 240 m
t = -70 - +300 °C
p = up to 35 bar |
|
Vertical single-stage centrifugal pump type CG
Vertical single-stage pump with volute casing in inline design.
Fields of application:
Shipbuilding
Operating data:
Q = 10 - 1.800 m3/h
H = 10 - 150 m
t = up to +80°C
p = up to 16 bar |
|
| Honda trash pumps are designed to allow solids(sticks, stones, and debris) up to 13/16 inch for the 2 inch model and 1 1/16 inch for 3 and 4 inch models to flow through the pump without clogging, making them ideal for construction sites. The WT pumps are designed to move water, and lots of it. The WT40 will move water at a rate of 433 gallons per minute and is capable of handling solids without clogging. A quick clean out port and easy maintenance features ensure long service life. Honda Trash Pumps are the ultimate choice for contractors and rental applications. |
|
Honda High Pressure pumps offer high pressure with lower flow. The best applications for these water pumps are where higher pressure is required, such as when using sprinklers or a nozzle.
WH15
This high pressure pump is powered by the GX120 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
WH20
This high pressure pump is powered by the GX160 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle. |
|
High pressure ring section centrifugal pump type VS
Horizontal multi-stage ring section centrifugal pump with impeller between bearings.
Fields of application:
Water supply, Feed water pump, Technological water and Industry, Energy plants
Operating data:
Q = 2 - 850 m3/h
H = 25 - 600 m
t = up to 130 °C
p = up to 65 bar |
|
| Centrifugal chemical pumps moulded in pure thermoplastic material with many executions to offer different applications for pumping chemicals in the most efficient way. Innovation thanks to stainless steel use in the pump body as reinforcement. The stainless steel is also used for the coupling guard and the base plate all according to the ISO norms. The employed material and external structures are identical for the whole project Frontiera. The inside solutions and type of motor connection are different. These pumps can be sealless or sealed; close coupled or long coupled executions. |
|
Materials
Wetted parts AISI 316 Bearings SiC Bracket WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to 400m3/h Total delivery heads up to 1300 m Temperature Rating from -150° up to +450°C Flange Rating PN 100
Construction
Horizontal multistage centrifugal pump Permanent Magnet drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Sintered Silicon Carbide Bearings Barrel execution Bearing Frame construction
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Materials
Wetted parts AISI 316 Bearings SiC / Special Carbon Bracket WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to a 45m3/h Total delivery heads up to 35m Temperature Ratings up to 200°C Pressure rating up to PN 16
Construction
Horizontal Centrifugal Pump for general applications Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Sintered Silicon Carbide Bearings / Special Carbon Bearing Frame and Close coupled execution
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Materials
Part in contact with liquid PP / PVDF Shaft / Bearings Al2O3 / PTFEC Bracket WCB
Technical Data : Flow Rates up to a 150m3/h Total delivery heads up to 58m Temperature Ratings up to 90°C Pressure rating up to PN 6
Construction
Horizontal plastic Centrifugal Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
Applications
Pumping acids, hydrocarbon, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Materials
Wetted parts AISI 316 Bearings SiC Bracket WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to 1000m3/h Total Delivery Heads Up to 220m Temperature from -150° to a 450°C Pressure Rating Up to PN 100
Construction
Horizontal Centrifugal Pump Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Sintered Silicon Carbide Bearings Bearing Frame and Close coupled execution
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Materials
Part in contact with liquid PP / PVDF Shaft / Bearings Al2O3 / PTFEC Bracket WCB
Technical Data : Flow Rates up to a 45m3/h Total delivery heads up to 35m Temperature Ratings up to 90°C Pressure rating up to PN 6
Construction
Horizontal plastic Centrifugal Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
Applications
Pumping acids, hydrocarbon, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions |
|
High-pressure multi-stage centrifugal pumps and membrane element housings from GE Water & Process Technologies are more than durable components. They are precision-engineered elements that play a critical role in customers' treatment systems.
Our ruggedly built multi-stage pumps meet your requirements for general water applications, high-temperature performance, chemical compatibility, or quiet operation. Because our pumps set industry standards for reliability and low overall lifecycle costs, you can let them work without having to worry. GE's world-class pumps come with stainless steel shells on every pump and options for NorylTM impellers or stainless steel impellers. |
|
| The Verdermag VMD is a very compact, magnetic driven centrifugal pump used in the lower flow segments in the process industry, as well as photo chemicals preparation. The VMD pumps are excellent small centrifugal pumps to build in industrial equipment and industrial machines. VMD directly coupled pumps are often used in OEM applications, such as metal plating, parts washing and pharmaceuticals. |
|
Verdermag mag drive centrifugal pumps
Verdermag mag drive pumps
The Verdermag series of pumps comprises the metallic Global models complimented by the non-metallic V-MD, GPMD, GLMD, TB and U Series, as well as the Global mag drive metallic series. The Verdermag range is therefore a complete, well-balanced series of magnetically coupled centrifugal pumps.
As with all series of Verdermag centrifugal pumps, current emphasis is on maximum interchangeability and quality improvements, hence all our products are covered by a two-year guarantee. Our motto is "simple by design."
Advantages Verdermag
- Zero leakage
- No mechanical seals or packed glands
- No external flushing systems
- Ensure a clean and safe operating environment
- Close coupled design
- No alignment required
- Increased Mean Time Between Maintenance
|
|
|
|
