|
|
ProMinent von Taine® pumps are magnetically-coupled rotary pumps for metering fluid chemicals. Metering is effected free of leakages, as the power transfer between motor and impeller is effected via a solenoid coupling. ProMinent von Taine® centrifugal pumps feed media up to 22 500 l/h and up to a suction height of 23.5 meters. The capacity being strongly dependent from the counter-pressure, the characteristic line must absolutely be observed.
Advantages
* Leakage-free metering of fluid chemicals
* No charge to the environment
* No loss of chemicals
|
|
|
Magnetic drive chemical pump type MNK/F, heavy duty design, plain bearings made of SSiC/SAFEGLIDE ® PLUS, eddy-current-free double can of CFRP/PTFE, magnetic coupling, permanent magnets of SmCo and NdFeB, impeller closed with back vanes, bare-shaft, nuts and bolts made of stainless steel, high-quality epoxy coating, inclusive test run, housing material: ductile cast iron EN-JS 1049 acc. to DIN EN 1563 (0.7043 DIN 1693), technical specification to ISO 15783 and DIN ISO 5199, dimensions to DIN EN 22858 / ISO 2858, flanges to DIN EN 1092-2, ISO 7005-2, housing end pressure PN 16
|
|
Pumped Liquid
Aggressive fluids, full desalinated water etc.
Main Fields Of Application
Process engineering and chemical industry, marine and offshore engineering (sea water desalination, chemical tanker)
|
|
MXM Series pumps offer the best combination of durability, safety and performance for a wide range of chemical process applications..
With proven dry run capability and our unique self-radiating bearing lubrication circuit, (patent pending) the MXM is able to withstand process-upset conditions. Close-coupled back pull-out design with individually replaceable internal parts maximizes ease of maintenance, while minimizing operating costs.
Utilizing the best materials for corrosion resistance and product integirty, the MXM features carbon fiber reinforced precision molded liquid contact parts with options of alumina ceramic, carbon or silicon carbide for bearings, shafts and thrust surfaces.
|
|
PERFORMANCE RANGE JET
Flow rate up to 60 l/min
Dynamic head up to 47 m
OPERATING LIMITS
Suction lift up to 9 m
Fluid temperature up to +40 ℃
Maximum ambient temperature +40 ℃
• PROTECTION IP 44
• CONSTRUCTION AND SAFELY STANDARDS in compliance with IEC.
WARRANTY: 1YEAR (according to our general sales conditions)
|
|
|
This compact, corrosion-resistant pump has the durability for continuous duty in applications requiring low flow, yet higher pressure. Typical examples include laser cooling, medical systems, filter systems and various processing equipment in the electronics industry such as computer chip processing.
|
|
The MX Series pumps represent the latest state of the art design in plastic magnetic drive pumps. With the experience gained from previous generations of MDH pumps, the MX Series has been engineered to meet the most severe operating conditions.
When fitted with a carbon bearing, the MX will allow for brief periods of dry running. The new “self radiating structure” (patent pending), in addition to the existing proven non-contact principle with front and rear supported spindle, greatly improves the ability to withstand cavitation and running against a closed discharge valve.
MX Series pumps are highly recommended for use in various production processes such as filtering, spraying, washing, plating and etching in surface treatment applications.
Split Volute casing (patent pending) The MX Series is the first resin magnet pump that uses a split volute pump casing that forms a vortex chamber
|
|
Features
* Design to prevent overloading
* Top flat efficiency
* Shielded ball bearing
* Replaceable wearing parts
Range
* Capacity 28 to 0.4 LPS
* Head up to 6 to 50 meters
* Power rating 0.37 kW to 3.7 kW (0.5 to 5.0 HP)
Applications
* Lawn sprinklers
* Industries
* High-rise apartments for clear water handling
* Car washing
* Irrigation
|
|
|
Monoblock centrifugal horizontal pumps with single impeller. Able to pump clean water and non-aggressive liquids, in heating and conditioning systems, for civil and industrial purposes, in fire installations and for sprinkler and food irrigation plants.
|
|
|
|
|
|
Goulds Model 3311 is a radial split, segmented ring multistage pump... a proven state-of-the-art design for the most demanding high pressure services. The modular design and parts interchangeability reduce maintenance and inventory costs. Compact size and flexible nozzle positions reduce space and piping costs. High reliability, optimum efficiency, and simplified maintenance combined with low initial cost and low operating costs make the 3311 a true world class pump.
Specifications:
Capacities to 1100 GPM (250 m3/hr)
Heads to 5250 feet (1600 m)
Temperatures to 356° F (180°C)
Pressures to 2320 psig (160 bar)
Design Features:
High Efficiency Performance is achieved by utilizing multiple hydraulics for each pump size. Reduce running costs by operating in the best efficiency range.
Modular Design permits option flexibility, reduces lead-times, and maximizes interchangeability. Spare parts inventory is reduced.
Ease of Maintenance is assured as roller bearings, mechanical seal, and balance device can be serviced without disturbing piping or driver.
Balance Drum/Disc Combination balances axial thrust over the full range of performance.
Rotating Element is dynamically balanced after individual balancing of the impellers. First critical speed is always above maximum operating speed.
Multiple Nozzle Orientations to fit your piping configurations.
|
|
TMA
Multistage centrifugal pumps. Capacity to 45 m3/h, max pressure 40 bar.
|
|
|
|
|
|
The MSL, MSM and MSV range the axial thrust is balanced by a newly designed and patented drum system that does not need tight, wear-sensitive running clearances to efficiently control re-circulation flow in the balance line.
The MSM range is designed for high pressure applications and the axial thrust is balanced by the combination of the drum and disc.
PERFORMANCE
• Capacity - max. 250 m3/h
• Head - max. 630 m
• Speed - max. 3600 rpm
• Temperature -10°C to 180°C (Optional 200°C )
• Pressure rating - max. 63 bar
The SIHI Multi range have optional design features available including: various nozzle positions, choice of shaft sealings, a stage reduction capability, a balance disc lift- off capability and inboard and outbord anti-friction bearings.
MORE ... FOR LESS ...
• Reduced life-cycle costs
- enhanced efficiency & innovative axial thrust balancing
- only one shaft seal
- lower power consumption
- high reliability
• Ease of maintenance
- simple dismantling and assembly
- meets technical requirements of ISO 5199 / EN 25199
• Minimised wear
- reduced usage of spare parts costs
• Global service network
- established local Service Centres around the world
|
|
APPLICATIONS
* FOR DOMESTIC SYSTEMS AND SMALL IRRIGATION SYSTEM
PRESSURISATION.
* HANDLING OF NON AGGRESSIVE CIVIL AND INDUSTRIAL LIQUIDS.
* FOR WASHING SYSTEMS AND FOR INSERTION INTO COMPLEX
INDUSTRIAL MACHINERY AND LINES.
DESIGN ENGINEERING
* SEALED MOTOR WITH EXTERNAL VENTILATION AND FINNED ALUMINIUM
ALLOY CASING
* IP 44 PROTECTION CLASS
* CLASS “F” INSULATION
* MAX PUMP LIQUID TEMPERATURE: 50°
|
|
|
Centrifugal multi-impeller water pumps able to develop high pressure and a high water lift with a comparatively low power consumption. Thanks to their silent running and very good features, they are suitable in domestic fittings by tank pressure groups, for small sprinkler irrigations and car washing.
|
|
|
|
|
|
SB, SBI and SBN vertical multistage centrifugal pumps are powered by standard electric motor.
The motor output shaft directly connects with the pump shaft through a coupling. The pump unit consists of optimized hydraulics, various types of connections, an outer sleeve, a pump head, pump base, four stay-bolts and various other parts. The pump base has suction and discharge ports on the same level (in-line). This in-line design provides a more compact design and easier installation. All pumps are equipped with a mechanical shaft seal of the detachable cartridge type. SB, SBI and SBN pumps are available with various stages and capacities to provide customers a choice of models for many applications.
Operating Limits
50Hz
- Capacity : max. 120m3/h
- Head: max. 325m
- Liquid temperature : -15ﾟC to+120ﾟC
60Hz
- Capacity max.145 m3/h
- Head : max. 270m
- Liquid temperature : -15ﾟC to+120ﾟC
Applications
- Industrial washing equipment
- Heat recovery
- Pressure boosting
- Filtration equipment
- General industry
- Auxiliary equipment
- Irrigation
- Water treatment
- H.V.A.C
- Cooling and chiller
- Aggressive liquids
- Fire-fighting equipment
- Reverse osmosis
- Swimming pools
|
|
CR/CRN Multistage In-line Pumps
Applications: Water boosting, transfer, circulation, boiler feed and treated water duties (CRN only)
Duty range: Flows to 120m³h
Heads to 460 metres
Temperature range: -20°C to +120°C
Pressure rating: Up to 48 Bar
Pump connections: CR:1"/1¼"/1½" BSPF oval flanges
25mm to 100mm round flanges
CRN: Grooved pipe jointing system for CRN2 to CRN16.
65mm and 100mm flanges for larger models
|
|
Features and Benefits
Self-Priming Design
Fully Serviceable
FDA Compliant Impeller
Corrosion Resistant
Powered for Continuous Operation
Applications
Lawn Sprinkling
Irrigation
Air Conditioning Systems
Heat Pumps
Water Transfer and De-Watering
|
|
Many decades of experience are incorporated in the centrifugal pumps from Lutz-Jesco. Special varnish layers and highly resistant materials guarantee highest reliability and long service life, even with most aggressive media. The product range includes motor pump units as well as standard pumps for many possible fields of application.
The chemical centrifugal pumps form Lutz-Jesco have been developed particularly to be used for industrial applications and are thus espcially sturdy and have a long service life - also in the case of most aggressive media and high-duty operation.
Chemical motor pump units BN are single-stage, normal-priming pumps with horizontal axis. They are supplied completely with motor for a fast and easy installation into the piping system. Suitable for capacities of up to 100m3/h.
|
|
Series 9000P-O
Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.
The broad, versatile line includes models with rugged housings of polypropylene that stand up to strong chemical herbicides. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.
|
|
Use the compact Series 140 pumps where maximum flow with minimal pressure is desired. Maximum flow is 12.5 GPM (55 LPM) and maximum head is 11.5 ft. (2.5m)
Series 140 pumps use 1/20 HP (.037 kw), 2900 rpm 115- volt air-cooled motors, and are made with a variety of materials such as glass-filled polypropylene, Buna N
rubber, ceramic, Ryton®, Teflon® and Viton®.
|
|
|
Whether bypassing a pump station during repair, keeping critical services operational at a plant, or helping a construction crew finish on time, Gorman-Rupp's Super T Series® portable engine-driven pumps keep the liquid flowing. Gorman-Rupp's Super T Series self-priming centrifugal pumps are designed to reprime automatically in a completely open system - without a need for suction or discharge check valves (an optional discharge check and air release valve is only required when pumping against a pressurized system). Additionally, there is no need for add-on vacuum pumps or compressors, which add to owner maintenance and increase the potential for costly repairs.
|
|
Construction
- Close-coupled self-priming liquid ring pumps with star impeller.
- B-CA: bronze version.
Applications
- For clean liquids without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials.
- If the liquid to be pumped has entrained air or gas or the flow in the suction pipe is not stable.
- For drawing water out of a well.
- For increasing network pressure (follow local specifications).
|
|
|
Corrosion-resistant, magnetic drive self-priming pump lifts up to 25 feet (7.6 meters) and fast primes up to 18 feet (5.5 meters) in 90 seconds. Magnetic drive operation ensures no seal replacements, no leaks, and capability to run dry with no damage.
|
|
Goulds Model 3796 process pump line is specifically designed to provide superior performance for self-priming services of the Chemical Process Industries.
Specifications:
Capacities to 1250 GPM (284 m3/h)
Heads to 430 feet (131 m)
Temperatures to 500° F (260? C)
Pressures to 375 PSIG (2586 kPa)
Effective static lift to 20 feet (6 m)
Design Features:
Patented design
One-piece casing with integral priming and air separation (no external priming chamber or air separator required)
No suction check valve required
Rapid priming time
Positive retention of pumpage under siphon conditions
Self-purge of vapors
|
|
TBH Series
Multistage self-priming centrifugal pumps with horizontal mounting, vertical suction and discharge flanges.
Capable of handling mixtures of gas and clean and not abrasive liquids.
Low capacity – High head.
Suction lift to 8,5 m.w.c. (Metres water Column)
Low operating speed for extended life, low vibration, low noise level and maximum reliability.
Impellers are individually hydraulically balanced thus end thrust forces to bearings are eliminated.
Mechanical seals are standard and unified to DIN 24960.
Optional double mechanical seals back to back or tandem.
Cooled or heated seal housing are available.
Reduced number of components is achieved by design innovation.
Choice of motor mounting, including close-coupled through flexible coupling to
unified B5 motor, up to 22 kW.
Variety of materials are available to meet specific requirements.
|
|
These pumps are suitable for transferring liquids containing impurities measuring up to 30 micron.
The hydraulic components, namely the brass scroll, the bottom in cast iron and the aluminium pump body, allow the pumps to be used with emulsions, oily substances and liquids in general as long as they are not oxidative for construction materials.
Viscosity must not exceed 3° Engler (21 CST).
They must be installed at the top of the tank and must be primed before use.
If the pump sucks in air due to lack of liquid, priming must be repeated.
To ensure a long life for the pump, never let it turn when it is dry since the mechanical seal is not self-lubricated.
|
|
Recycling and filtering of water from medium and great swimming pools.
Quiet running single etage centrifugal and self priming pumps, complete with pre-filter.
|
|
APPLICATIONS
* FOR DOMESTIC SYSTEMS AND SMALL IRRIGATION SYSTEM PRESSURISATION.
* HANDLING OF NON AGGRESSIVE CIVIL AND INDUSTRIAL LIQUIDS.
* FOR ANY APPLICATION REQUIRING A SELF PRIMING SYSTEM.
DESIGN ENGINEERING
* SEALED MOTOR WITH EXTERNAL VENTILATION AND FINNED ALUMINIUM ALLOY CASING
* IP 44 PROTECTION CLASS
* CLASS “F” INSULATION
* MAX PUMP LIQUID TEMPERATURE: 50°
|
|
|
The self-priming Fristam FZ pumps operate in accordance with the side-channel principle. Impellers with radial blades, in conjunction with hydro-dynamically optimised side-channels, transmit the pressure energy to the product. Very narrow packed sealing gaps ensure an outstanding suction performance
|
|
Today’s pumping applications demand better and more efficient self-priming, solids-handling pumps. At Gorman-Rupp, providing greater performance and reducing installation and maintenance costs have always been our ultimate goals. This makes the Ultra V one of the best values introduced to the pump industry in decades.
This next generation of solids-handling, self-priming centrifugal pumps offers substantially higher pressures, flows, efficiencies and time-saving maintenance features, all in one package.
Ultra V Series pumps achieve up to 60% increased pressure and 40% increased flow over traditional self-priming trash pumps of the same size, while substantially increasing overall pumping efficiency.
|
|
|
|
