|
|
|
This series pumps is the festival section type multi-stage centrifugal pump, has used the national recommendation use highly effective energy conservation water power model, has the highly effective energy conservation, the performance scope broad, the movement safe is steady, low merit and so on noise, long life, installment service convenience; The material quality pumps which through the change (or pumps has flowed partial material qualities), the seal form and the increase cooling system, may transport the hot water, the oil class, corrosiveness and contains the grinding compound the medium and so on.
|
|
Operating Limits:
-Liquid temperature:
-Normal temperature type:-15°C?+70°C
-Hot water type: +70 °C?+100°C
-Max. ambient temperature:+40°C
-Max. operation pressure:10 bar
-Max. inlet pressure is limited by max. operation pressure
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class B/F
-Protection IP55
Material:
-Pump body: Stainless Steel
-Impeller: Stainless Steel
-Motor Shaft: Stainless Steel
-Mechanical seal:NBR/Ceramic/Carbon
Application:
·Mainly used in industrial field:
·Air-conditioning system
·Cooling system
·Industrial cleaning
·Water treatment(Water purification)
·Aquiculture
·Fertilizing/metering system
·Environmental application
·Other special applications
|
|
Operating Limits:
-Max.suction head:8m
-Max.liquid temperature:35°C
-Max.environment temperature:40°C
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class B/F
-Protection IP44
Material:
-Pump body: Cast Iron
-Impeller: Noryl
-Motor Shaft: Hi-Cr plated 45# Steel/2Cr13# Stainless Steel/S.S#304 Welding shaft
-Mechanical seal: Ceramic/Graphite
Application:
Centrifugal selfpriming multistage water pumps able to develop high pressure and a high water lift with a comparatively low power consumption.
The silent running and very good features, they are suitable in domestic fittings by tank pressure groups, for small sprinkler irrigations and car washing.
|
|
High-pressure multi-stage centrifugal pumps and membrane element housings from GE Water & Process Technologies are more than durable components. They are precision-engineered elements that play a critical role in customers' treatment systems.
Our ruggedly built multi-stage pumps meet your requirements for general water applications, high-temperature performance, chemical compatibility, or quiet operation. Because our pumps set industry standards for reliability and low overall lifecycle costs, you can let them work without having to worry. GE's world-class pumps come with stainless steel shells on every pump and options for NorylTM impellers or stainless steel impellers.
|
|
|
|
|
|
C.R.I MV Series Vertical multistage in-line centrifugal pumps are axial suction & radial delivery non-self priming pumps available in various capacity, types of MOC and port connections to best suit the applications. As the suction and discharge ports of these pumps are in the same horizontal axis, this system ensures one pipe horizontal installation and compact pipe connections using the same pipe dimensions. The impellers, diffusers and shaft of these pumps are made up of AISI stainless steel and designed to deliver best possible hydraulic efficiency.
These pumps are powered by a C.R.I. totally enclosed fan cooled, A.C induction motor, suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration and noise free operations. Shaft is made of quality steel, precision ground of ample size for transmitting the rated Horsepower. All single-phase pumps are incorporated with thermal over load protector. These pumps require an adequate motor protection control panel.
|
|
|
|
|
|
C.R.I MV Series Vertical multistage in-line centrifugal pumps are axial suction & radial delivery non-self priming pumps available in various capacity, types of MOC and port connections to best suit the applications. As the suction and discharge ports of these pumps are in the same horizontal axis, this system ensures one pipe horizontal installation and compact pipe connections using the same pipe dimensions. The impellers, diffusers and shaft of these pumps are made up of AISI stainless steel and designed to deliver best possible hydraulic efficiency.
These pumps are Powered by a totally enclosed fan cooled, A.C induction motor, suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration and noise free operations. Shaft of ample size made of quality steel and precisely ground is used for transmitting the rated horse power. All single-phase motors are incorporated with thermal protector. These pumps require an adequate motor protection control panel.
|
|
|
|
|
|
Application
These pumps are suitable for various purposes such as water supply system in industrial plants agriculture and sprinkler irrigation systems, Air conditioning plants, pumping fuel, edible oils and condensates.
Design
General
KSM low pressure, self regulating pumps consists mainly of four elements.Volute casing with stuffing box.
Impeller.
Suction Cover.
Bearing Pedestal.
Volute Casing
Casing consist of axial suction and radial discharge branch, which passes through the center line in vertical which ensures the balance of the liquid being pumped.
Stuffing Box
It is integrally cast with the volute casing and is readily accessible for the insertion of gland packing the pump can also be provided with mechanical seal.
Impeller
The impeller is of radial type with double curvaflire vanes, over hung type. The impeller is statically and dynamically balanced. with balancing holes.
Bearing Pedestal
There are basically two types of bearing pedestals which cover the ranges of pumps.Type I & Type 2. In all pedestal designs two robust deep groove ball bearing are provided for the shaft to take up radial and axial loads.
In case of heavy duties type 2 pedestal is used which has thicker shaft and larger outer diameters bearing.
|
|
Operating Limits:
-For clean, non-flammable and non-explosive liquid containing no solid granules and fibers.
-Liquid temperature:
Normal temperature type:-15¡ÆC¡75¡ÆC
Hot water type:70¡ÆC¡120¡ÆC
-Max. ambient temperature:40¡ÆC
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class F
-Protection IP55
|
|
Speciality
FSB and FSB-D type centrifugal pump,overflow part is made of fluoroplastic alloy ,compact in structure and easy to operate with low price,pump casings,impellers and mechanical seals of the two types can be exchanged in qpplication, therefore,they are welcome in industries such as pesticide,electronics and paper manufacturing etc.
Introduction
FSB and FSB-D type centrifugal pump,overflow part is made of fluoroplastic alloy,compact in structure and easy to operate with low price pump casings,impellers and mechanical seals of the two types can be exchanged in application,therefore they are welcome in industries such as pesticide,electronics and paper manufacturing etc,
|
|
|
|
|
|
|
C.R.I. Self-Priming Jet pumps, pump casing and ejector unit are designed carefully to give the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a bellows mechanical seal made of Carbon & Ceramic is fitted over the shaft, which is grounded to close tolerances. Most modern and highly sophisticated machinery and technology are employed in the manufacture of these pumps using quality raw materials, dynamically balanced impellers, seals and ball bearings to ensure long life. C.R.I. Self-Priming Jet pumps are powered by a totally enclosed fan cooled, A.C. Induction motor, suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration and noise free operations. The varnish impregnated windings made of enameled copper wire offer excellent resistance. Shaft is made of quality steel, precision ground of sample size for transmitting the rated Horsepower. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Thermal Over load Protector (motor protector) is incorporated in single - phase motors.
|
|
General
The selfpriming multistage DICKOW-centrifugal pump is designed for handling hydrocarbons and other volatile liquids.
The HZS-type is used in tank farms, for offloading of rail cars and trucks, filling of storage tanks, feeding hydrant systems on air fields and for other applications where priming of empty suction pipes is required.
The HZSA-type with low NPSH-requirements and gas handling capability is developed for pumping liquified petroleum gas (LPG). Typical application is the filling of LPG-trucks in refineries.
The performance range is subdivided to achieve best efficiencies for all service conditions.
With a wide selection of materials and the possibility of applying several shaft sealing systems as well as a hermetically sealed permanent magnetic coupling, the HZS / HZSA-pumps are suitable for handling almost all kinds of liquids which are free of abrasive solids and of suitable viscosity.
|
|
|
ourzx series self-priming pump is a kind of energy-saving pump developed by us after studying relevant technical data both at home and abroad and also making improvement,this is a kind of self-priming centrifugal pump,featured by a compacted structure, easy and stable operation, easymaintemance,high efficiency long life, strong self-priming capacity.etc. the foot valve is unnecessary for the pipeline just make sure there is quantitative conduction liquid in the pump body before the operation. Therefore, it simplifies the pipeline system and improves the working condition.
|
|
Features:
WIDE RANGE OF APPLICATIONS:
- Liquids Entrained with Solids
- General Industrial, Pulp & Paper, Mining, Meat Packing
- Raw Sewage, Sludge
- Slurries
- Trash
- Wastewater
CAPABILITIES:
- Capacities to 1300 GPM
- Heads to 112 Feet TDH
- Sizes: 3", 4" and 6"
- Solids Handling: Up to 3" Diameter Sphere
- Suction Lifts to 25 Feet
CONSTRUCTION:
- Cast Iron
- 316 Stainless Steel Fitted
- All 316 Stainless Steel
- CD4MCu Fitted
- All CD4MCu
|
|
Operating Limits:
-Max.working pressure : 10 bar
-Fluid temperature up to 35°C
-Maximum ambient temperature 40°C
-Total suction lift up to 8 mt.
Motor:
-Insulation Class B
-Protection IP44
Materials:
-Pump body: Stainless Steel
-Impeller: Noryl
-Motor shaft: Hi-Cr plated 45# Steel/Stainless Steel
Application:
Automatic high pressure groups coupled with selfpriming jet pumps.
They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups.
|
|
Operating Limits:
-Max.working pressure : 10 bar
-Fluid temperature up to 35°C
-Maximum ambient temperature 40°C
-Total suction lift up to 8 mt.
Motor:
-Insulation Class B
-Protection IP54
Materials:
-Pump body: Stainless Steel
-Impeller: Noryl
-Motor shaft: Hi-Cr plated 45# Steel/Stainless Steel
-Pressure tank: 19L or 24L
Application:
Automatic high pressure groups coupled with selfpriming jet inox pumps.
They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups.
|
|
Operating Limits:
-Max.suction head:9m
-Max.liquid temperature:60°C
-Max.environment temperature:40°C
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class B/F
-Protection IP44
Material:
-Pump body: Stainless Steel
-Impeller: Brass/Noryl/Stainless Steel
-Motor Shaft: Hi-Cr plated 45# Steel/2Cr13# Stainless Steel/S.S#304 Welding shaft
-Mechanical seal: Ceramic/Graphite
Application:
·Stainless steel pump body self-priming pumps suitable for gardening, water supply, washing, increase water pressure, etc. It is usually can be combined with a pressure switch and a surge tank to be used as a Domestic Water System for distributing water.
|
|
Operating Limits:
-Max. fluid temperature from +5°C~60°C
-Max. ambient temperature up to 50°C
-Max. working pressure: 2.5Bar
Material:
-Pump body and diffuser in glass loaded Polypropilen
-Impeller in glass loaded Noryl
-Motor shaft in AISI 1045
-Mechanical seal in graphite and ceramic
-Motor housing and pump support in aluminium L-2521
-Windings impregnated with epoxy resin
Motor:
-2-pole induction motor
-Built-in thermal protection
-Insulation class B
-Protection IPX5
-Continuous duty
Application:
·This self-priming electric pump is designed for clean or slightly dirty water with suspended solids. It is suitable for swimming pool filtration system, etc.
|
|
|
|
|
|
General
Magnetic coupled DICKOW-Pumps of series HZSM / HZSMA are of sealles design. the containment shell forms a closed system with hermetically sealed liquid end. The properties of the integrated side channel stage allows the handling of entrained gas and operation under suction lift conditions.
Applications
Magnetic driven HZSM / HZSMA-pumps are designed to improve plant and personnel safety, especially when handling toxic, expolsive or other dangerous liquids which react on contact with the atmosphere. For all these sevices the containment shell replaces double acting mechanical seals with external fluid reservoirs and the necessary control equipment. HZSM / HZSMA-pumps therefore offer exceptional benefits to the chemical, petrochemical and allied industries and fulfill all environment protection rules.
Due to the fact that 90% of pump failures are caused by leaking shaft seals, the sealless design increases the availability and reduces maintenance costs.
The HZSM-type is used in tank farms, for offloading rail cars and trucks, filling of storage tanks and other applications where priming of empty suction pipes is required.
Considering low NPSH-values, gas handling capability and sealless design, the HZSMA-type offers special benefits to liquified gas applications. Typical application is filling of LPG-trucks and rail cars in refineries.
|
|
Operating Limits:
-Liquid temperature:
-Normal temperature type:-15°C?+70°C
-Hot water type: +70 °C?+100°C
-Max. ambient temperature:+40°C
-Max. operation pressure:10 bar
-Max. inlet pressure is limited by max. operation pressure
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class F
-Protection IP55
Material:
-Pump body: Cast Iron
-Impeller: Stainless Steel
-Motor Shaft: Stainless Steel
-Mechanical seal:NBR/Ceramic/Carbon
Application:
·Mainly used in industrial field:
·Air-conditioning system
·Cooling system
·Industrial cleaning
·Water treatment(Water purification)
·Aquiculture
·Fertilizing/metering system
·Environmental application
·Other special applications
|
|
THE VSMP PUMPS
The Vertical Sealless Motor Pumps series of sealless single or multistage centrifugal pumps is mainly for use with combustion gases like methane, high suction pressure gases like Carbon dioxyde, expensive gases like Argon, where all risks of gas leakage of the process gas contamination are eliminated.
The main feature of these pumps are:
Maximum level of safety with LNG (gas tight)
Flowrate up to 2'500 L/min
Single or multistage: differential head up to 1'000 m
Available for all cryogenic gases including LNG, except Oxygen for safety reasons
|
|
|
Under the SP fluid the dregs thick liquid pumps forthe verticalcentrifugal dregs thick liquid pumps, plunges underthe fluid, uses into transport the abradability, the thick pellet, the highlyconcentrated dregs thick liquid. Does not need any axis to seal withthe axis seals the water, is insufficient in the absorption quantityunderthe operating mode also can the normal work. SP pumps has flowed the part to be made by the wear-resisting metal. SPR pumps plunges underthe fluid the spare part to bring the rubberouter lining, is suitable to transporting the non- edges and cornersthe abradability dregs thick liquid. According to the dregs thick liquid pond liquid level height, maychoose the different length the pump driving shaft orthe inductionpipe. Uses the many kinds of speeds and the many kinds of aberrations way.causesto pump underthe best operating mode moves, service life long.the movement benefit is high, can satisfy many kind ofbadtransportations condition.
|
|
Features :
WIDE RANGE OF
APPLICATIONS:
- Industrial Process
- Corrosive Liquids
- Paint
- Waste Water
- Chemical Slurries
CAPABILITIES:
- Capacities to 3000 GPM
- Heads to 230 Feet
- Temperature to 400 d. F
- Pump Length to 6 feet
- Shaft Diameter to 5"
CONSTRUCTION:
- Cast Iron
- 316 Stainless Steel
- Alloy 20
- Hastelloy
- CD4MCu
|
|
|
Honda trash pumps are designed to allow solids(sticks, stones, and debris) up to 13/16 inch for the 2 inch model and 1 1/16 inch for 3 and 4 inch models to flow through the pump without clogging, making them ideal for construction sites. The WT pumps are designed to move water, and lots of it. The WT40 will move water at a rate of 433 gallons per minute and is capable of handling solids without clogging. A quick clean out port and easy maintenance features ensure long service life. Honda Trash Pumps are the ultimate choice for contractors and rental applications.
|
|
Honda High Pressure pumps offer high pressure with lower flow. The best applications for these water pumps are where higher pressure is required, such as when using sprinklers or a nozzle.
WH15
This high pressure pump is powered by the GX120 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
WH20
This high pressure pump is powered by the GX160 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
|
|
|
We have decades of experience in the pumping of cooling water (seawater and brackish water) and engine water. We have developed our centrifugal pumps in collaboration with all notable manufacturers of diesel and marine-diesel engines. The pumps are driven via a belt or directly through a driving pinion. The pumps can be supplied with either clockwise or anticlockwise directions of rotation. Prior to starting the pumps must be filled up completely with water. In case of long periods of disuse this water should be drained via the attached draining cocks. In commercial, industrial, official or private ships and boats, e.g. fishing boats, ferries, passenger boats, yachts, tugs and working boats, pilot boats, customs and police craft, fireboats and rescue cruisers, boats of the federal navy and of the federal border patrol.
|
|
APPLICATIONS
* FOR DOMESTIC SYSTEMS AND SMALL IRRIGATION SYSTEM
PRESSURISATION.
* HANDLING OF NON AGGRESSIVE CIVIL AND INDUSTRIAL LIQUIDS.
* FOR WASHING SYSTEMS AND FOR INSERTION INTO COMPLEX
INDUSTRIAL MACHINERY AND LINES.
DESIGN ENGINEERING
* SEALED MOTOR WITH EXTERNAL VENTILATION AND FINNED ALUMINIUM
ALLOY CASING
* IP 44 PROTECTION CLASS
* CLASS “F” INSULATION
* MAX PUMP LIQUID TEMPERATURE: 50°
|
|
Horizontal single stage centrifugal pumps with overhung impeller and axial suction, constructed using the "Back pull-out system" and available with four different sizes of support.
Main technical features
- Flow rate up to 500 m3/h
- Discharge head up to 95 m
- Working pressure up to 10 bar
- Working temperature up to 90°C
- Environmental temperature up to 40°C
- Size from 80 to 300 mm
- Height of suction up to 7 m
- Flanges drilling UNI PN10
- Nominal rotational velocity (50Hz): 2900 rpm/1450 rpm
Advantages
- Reliability
- Long duration
|
|
|
Centrifugal single impeller low head water pumps for flow irrigation systems with high flow rates. Suitable to pump clean water or non-aggressive liquids charged with small solid impurities. To be used in flow irrigation systems in gardening and agriculture and in industrial fittings.
|
|
The diesel engines are multifuel engines able to run on crude oil (CRO), heavy fuel oil (HFO), light fuel oil (LFO), gas or gas/oil combination. The gas engines can be utilized as pump drives as well.
Wärtsilä%u2019s pump units comprise a complete train of engine, gearbox and pump on the baseframe along with the required auxiliary units. Pumps are selected according to the required pumping duty.
|
|
This is a "pump system" consisting of various components. With pumps of different sizes it pumps pulp suspensions up to a consistency of approximately 16%.
Due to the modular design, our SF - pump can operate in the entire consistency range from 0 -16 %.
|
|
|
|
