|
|
Specifically designed for re-circulating service in reverse osmosis and other membrane systems. Equipped with balanced double shaft seal with buffer fluid ports on top and bottom for complete removal of air/vapor from seal chamber.
- Rated up to 700 psi maximum pump casing pressure (at
discharge)
- Maximum differential pressure 150 psi (based on water)
- Sanitary construction for food and dairy processing
service
- Large, long-life bearings with non-wearing labyrinth seals
- 316L stainless steel impeller and shaft; 17-4PH stainless
steel casing
- Motor flange adapter reduces coupling wear
|
|
The patented Roto-Jet pump has only two basic working parts a rotating case with a stationary pick-up tube mounted within it. Performance can be adjusted by changing speed and/or pick-up tube.
Features / Benefits
- High pressure without high speed.
- Flexible - performance can be adjusted by changing the pitot tube.
- Simple - only two basic working parts.
- Smooth, pulsation-free flow.
- Low pressure mechanical seal is easily maintained.
- Isolated bearing pedestal to minimize bearing contamination.
- Hydraulically stable along the entire performance curve and beyond BEP.
- Low minimum flow requirement.
- API design available.
- Single or double mechanical seal.
- Threaded or flanged connections.
- Materials of construction: Ductile Iron, Carbon Steel, 316 Stainless Steel, CA6NM, and CD4MCu.
- Super duplex and Hastelloy are also available.
- Oil lubricated bearings.
|
|
Flow rate: 80 Litres/min (21.1 USgallons/min)
Pressure up to 1.2 bar (17.4psi)
Features:
• Heavy duty robust design
• Stainless steel construction
• Long life DC motor
• Silent running
• Anti-clog impeller design
• Long life mechanical seal
• Single tool servicing
• ISO 8846 MARINE and USCG Regulations for Ignition Protection
• ISO 8849 MARINE Bilge Pump Standard
|
|
The Gorman-Rupp line of engine driven high pressure fire pumps delivers up to 156 PSI and 250 GPM. They are equipped with an exhaust primer. All units have a built-in check valve and include a discharge pressure gauge, brass hose adapters - NPT to National Standard Fire Hose Threads, and a suction strainer.
Specifications
Size: 1-1/2" (37.5 mm), 2-1/2" (62.5 mm)
Max Capacity: 260 GPM (16 lps)
Max Head: 360' (110 m)
Max Solids: 0.3125" (8 mm)
Materials of Construction: Aluminum
Horsepower: 13 HP to 23 HP
|
|
The Fyr Port series portable pumps arespecially designed for applications involving high pressure. Standard features include brass piston type hand primer, recoil starting, and an 8-horsepower two-cycle engine which offers high horsepower in a small package. Two different mounting options are available — skid(20FP-C8SK) or wraparound frame (20FP-C8FR). The complete pumping unit weighs in at a mere 50 pounds — ideal for one-man portability.
* High Pressure performance
* Compact very lightweight design
* High horsepower weight ratio
* One man portability
Optional hose package: Contains 100 feet of 1-1/2" fire hose, adjustable nozzle, tune up kit, and 2-cycle oil in a canvas carrying bag.
|
|
Series TC and TH have been especially developed to sapply internally cooled tools with coolant fluid.
Closed impellers provide optimal hydraulic efficiencies while minimizing power consumption.
Closed impellers
High pressure / no long chips
10 ... 600 l/min
30 ... 520 m
|
|
|
Fristam FM pumps have been specially developed for generating high pressures and for operation with extreme pressure loads. The pressure is increased by several successive pumping stages.
|
|
Suitable for applications where the flow required varies continuously or the pump operates against a closed discharge valve.
MODEL :- CWHA
Capacity:- 90 m3/h - 400 USgpm
Delivery head max:- 1900 m - 6300ft
Max speed:- 6800 rpm
Casing pressure:- 160 bar - 2320 psig
Lubrication :- oil
MODEL :- CWHG
Capacity:- 80m3/h - 350 USgpm
Delivery head max:- 780m / 2575ft
Max speed:- 4300 rpm
Casing pressure:- 85 bar - 1230 psig
Lubrication :- grease
FEATURES
- Wide operating range up and down the performance curve
- Complies with API 8th edition
- Complies with ATEX
- Pulsation free operation
- Seal only on suction side
- No contact between pumped medium and pump lubricant
- Ability to handle solids and gases
- Dry running capability
BENEFITS
- Handles wide variations in flow (from 20% to 110% of
BEP flow)
- Wide application in oil extraction and oil processing
- Suitable for Category 2
- Extended MTBF
|
|
Honda High Pressure pumps offer high pressure with lower flow. The best applications for these water pumps are where higher pressure is required, such as when using sprinklers or a nozzle.
WH15
This high pressure pump is powered by the GX120 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
WH20
This high pressure pump is powered by the GX160 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
|
|
Honda High Pressure pumps offer high pressure with lower flow. The best applications for these water pumps are where higher pressure is required, such as when using sprinklers or a nozzle.
WH15
This high pressure pump is powered by the GX120 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
WH20
This high pressure pump is powered by the GX160 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
|
|
High pressure diaphragm pump units are used for the zero-leakage handling of hazardous, toxic and difficult media. State-of-the-art design features ensure high operating safety, economy and availability. They are characterised by their space-saving construction and flexible drive variants.
- Pressure max: 350 bar
- Capacity max: 850 l/min at 120 bar
250 l/min at 350 bar
- Power: 250 kW
- Weight: 10 t
|
|
ALMATEC's high-pressure diaphragm pumps have been specially developed for charging filter presses with chemical wastes and special sludge.
With a driving pressure of max. 7 bar, the pumps of series AH build up a delivery pressure of 16 bar on account of the internal pressure boost. These genuine double-action pneumatic diaphragm pumps are available in three sizes with a maximum delivery volume of 4 m³/h (AH 15), 10 m³/h (AH 25) and 20 m³/h (AH 40).
All housing parts in contact with the product are made of PE UHMW. This polymer material is seven times more resistant to abrasion than PP. PE is also more resistant to wear than cast iron, aluminium and even steel.
|
|
• Available pressures up to 150 psi (10.3 bar)
• Pump is sealed in corrosion resistant material, thus offering unparalleled performance and life
• Bypass System eliminates pulsation and cycling
• Latest co-injection mold diaphragm technology virtually eliminates potential leak paths
• Wetted materials designed to withstand many corrosive chemicals*
• Variable Speed Drive optional
|
|
Hypro high pressure diaphragm pumps are recommended for spraying of herbicides, pesticides, liquid fertilizers and many other hard to handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs.
Pressure and output are designed for optimum performance of medium to large-sized sprayers. Hypro high pressure diaphragm pumps are supplied with single or double-splined through-shafts. Pumps include pulsation dampeners.
Performance Information
- Max. flow: 21.4 gpm/81 lpm
- Max. pressure: 725 psi/50 bar
- Max. rated speed: 550 rpm (D813); 3600 rpm (D813GRGI)
- Max. fluid temperature: 140°F/60°C
|
|
EH2-M
These air-powered, single diaphragm metallic pumps deliver discharge pressure twice the inlet pressure, up to 250 psi (17 bar). Designed for filter press feed or similar applications requiring higher discharge pressures.
Pipe Size: 2" / 50mm
Displacement Per Stroke: .22 gal / .83 ltr
Max. Flow per Minute: 25 gal / 95 ltr
Max. Solids Handling: .25" / 6mm or 2" / 50mm
Max. Discharge Pressure: 250 PSI / 17.2 BAR
|
|
| ... products without technical information |
| |
The present K3V is designed specifically for the earth moving and construction industries where in excess of 700,000 units have been supplied.
Features such as high efficiency , high power density, large self priming capability, long life, low noise and a wide range of control options has enabled the K3V to be a clear market leader.
Adopting a process of continual product development has resulted in todays K3V series of axial piston pumps.
|
|
Axial piston units are available in the form of pumps and motors in bent axis design or swashplate design for medium- and high-pressure ranges. They are the main components in the hydrostatic transmission. Compact size and high power density, economy and reliability are characteristic advantages which speak for the use of hydrostatic transmissions, together with the fact that they meet the demand for high speed and high torque, as well as optimum efficiency.
|
|
Axial piston units are available in the form of pumps and motors in bent axis design or swashplate design for medium- and high-pressure ranges. They are the main components in the hydrostatic transmission. Compact size and high power density, economy and reliability are characteristic advantages which speak for the use of hydrostatic transmissions, together with the fact that they meet the demand for high speed and high torque, as well as optimum efficiency.
|
|
The pumps are suitable to transfer liquids containing impurities measuring up to 2-3 mm .The hydraulic components, namely the brass impeller and the aluminium scroll and pump body allow the pumps to be used with water, emulsions and oily substances in general with a maximum viscosity 3°Engler (21 CST). The temperature of the liquid must not exceed 90° C.
|
|
| ... products without technical information |
| |
|
Handpumps with or without reservoir for use with corrosive liquids for pressures up to 700 bar. They are as single or two stage. Applications are for example pressure testing when there is no air connection available or backup pump in case the basic pump fails.
|
|
Resato’s new lightweight mini pump unit is available in four pressure ranges up to 1800 bar at 7 bar air drive pressure and 2500 bar at 10 bar air drive pressure.
Key Features:
- Ready-to-use.
- Pressure range up to 2500 bar / 36,250 psi.
- weight of less than 17 kg!
- Lightweight, easy to carry.
- Low noise level.
- Suitable for pressurizing oil, water or other fluids.
- Several pressure ranges available.
- All parts made of non-corrosive materials.
- All operating features panel mounted.
- Completely closed frame.
|
|
Watson-Marlow is the largest manufacturer of tube and hose pumps in the world, with over one million pumps sold.
They are the perfect pump, with no valves, seals or glands, and the fluid contacting only the bore of a hose or tube. Because they are simple to install, easy to operate and quick to maintain, they are the world's fastest-growing pump type.
Watson-Marlow solves pumping problems in every industry from pulp and paper to brewing and ceramics to water and waste treatment.
If you handle fluids from microliters to 80 cubic metres (350USgpm) and pressures up to 16 bar (230psi), contact us now; we can save you time and money and improve your processes.
|
|
|
|
|
|
PUMP CONSTRUCTION
General Features
Positive displacement peristaltic hose type to handle a wide variety of chemicals and liquids; pump with movement by ROLLERS ON BEARINGS. Rollers position 120° N 3.
Features:
• Efficient roller technology
• Standard leak detector
• Compact foot print
• Capable of operating in either direction without flow variation
• Capable of running dry without damage to pump or hose
• Capable of pulling 98% of full vacuum
• Valveless, sealless and glandless
• Capable to transfer mixed phases without damages
• Capable to transfer sensitive products and pollutant products
Material of Construction:
• Stator: Cast iron
• Rotor: Cast iron
• Rollers: cast iron
• Mounting frame: Painted steel
Side Cover: Polystyrene
Available Hose Material:
• Natural rubber
• Nitrile rubber
• Hypalon rubber
• Epdm rubber
Hose Size (ID) 76 mm
Connections:
• 304 SS
• 316 SS
• PVC
• PP
• TITANIUM
Connections size:
• 3” ANSI or ISO PN 16
Leak Detector Switch Rating:
• 100VA Max, 230 V. , 2,5 amps
Operating Speed : Up to 48 rpm
Max Discharge pressure:
• 8-10 bar continous
• 12-15 bar intermittent
Max Suction lift mt 8,5
|
|
|
|
