|
|
Many decades of experience are incorporated in the centrifugal pumps from Lutz-Jesco. Special varnish layers and highly resistant materials guarantee highest reliability and long service life, even with most aggressive media. The product range includes motor pump units as well as standard pumps for many possible fields of application.
The chemical centrifugal pumps form Lutz-Jesco have been developed particularly to be used for industrial applications and are thus espcially sturdy and have a long service life - also in the case of most aggressive media and high-duty operation.
Chemical motor pump units BN are single-stage, normal-priming pumps with horizontal axis. They are supplied completely with motor for a fast and easy installation into the piping system. Suitable for capacities of up to 100m3/h.
|
|
Thermoplastic vertical centrifugal pumps conceived for industrial applications, production lines and ecological facilities where resistance to chemical aggression must be coupled with reliability and easy maintenance.
Their particular construction eliminates the possibility of any contact between metal parts and the liquids, while the selection of materials and manufacturing technologies guarantees compatibility with the products handled a long operating life and conformity with the standards in force. The adoption of pumps with these characteristics eliminates, even in case of breaks, hazardous leaks and the need for openings on the bottom of the basins or tanks, allowing the absolutely safe pumping of chemical substances.
|
|
Verdermag mag drive centrifugal pumps
Verdermag mag drive pumps
The Verdermag series of pumps comprises the metallic Global models complimented by the non-metallic V-MD, GPMD, GLMD, TB and U Series, as well as the Global mag drive metallic series. The Verdermag range is therefore a complete, well-balanced series of magnetically coupled centrifugal pumps.
As with all series of Verdermag centrifugal pumps, current emphasis is on maximum interchangeability and quality improvements, hence all our products are covered by a two-year guarantee. Our motto is "simple by design."
Advantages Verdermag
- Zero leakage
- No mechanical seals or packed glands
- No external flushing systems
- Ensure a clean and safe operating environment
- Close coupled design
- No alignment required
- Increased Mean Time Between Maintenance
|
|
|
Sealed pumps, close-coupled execution. They are identical in the hydraulic parts to the ZMF model (Frontiera range). This pump range installs motors with special longer shaft with the advantage of a cheap and simple construction.
|
|
Series 9000P-O
Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.
The broad, versatile line includes models with rugged housings of polypropylene that stand up to strong chemical herbicides. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.
|
|
|
Centrifugal chemical pumps moulded in pure thermoplastic material with many executions to offer different applications for pumping chemicals in the most efficient way. Innovation thanks to stainless steel use in the pump body as reinforcement. The stainless steel is also used for the coupling guard and the base plate all according to the ISO norms. The employed material and external structures are identical for the whole project Frontiera. The inside solutions and type of motor connection are different. These pumps can be sealless or sealed; close coupled or long coupled executions.
|
|
|
Horizontal plastic Centrifugal self-priming Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
|
|
| ... products without technical information |
| |
For applications where metal belt fasteners can't be used, the Alligator® Plastic Rivet Fastener System is a long-lasting, easy-to-install solution for light-duty applications. Our sturdy non-metallic fastener is also a low-cost alternative to the time and expense associated with vulcanization.
Fastener plate leading edges are beveled to ensure a smooth, low-profile splice. The one-piece fastener features an integrated design with rivets molded right into the fastener top plate - fast belt replacement means reduced downtime and increased productivity. Plus, the smooth surface is easy to clean.
Design permits use on applications with minimum pulley diameters as small as 1-1/2" (38mm) and on belts 1/32" to 1/8" (0.8-3.2mm) thick.
Choose the material that matches your application. UV-resistant black delivers extended life in outdoor applications. FDA-accepted white plastic is suitable for food and pharmaceutical processing applications, and resists weak acids, alkali, hydrocarbons, ester solvents, and alcohols. Both materials can be used in applications from -20°F to 180°F (-29°C to 82°C).
|
|
|
Contacted SARONTECNICA S.r.l for greater details.
|
|
880 LFA
Low Friction Acetal Resin
• Plates in self-lubricating low friction acetal resin, light brown-coloured.
• Pins in chrome-nickel austenitic stainless steel (18% Chrome - 8% Nickel), work hardened for high resistance.
880 WR
Wear Resistant resin
• Plates in thermoplastic wear resistant resin, black-coloured.
• Pins in chrome-nickel austenitic stainless steel (18% Chrome - 8% Nickel), work hardened for high resistance.
|
|
| ... products without technical information |
| |
ALMATEC's A-Series made of plastic has been developed on the basis of extensive experience in the production of pneumatic diaphragm pumps and offers numerous advantages meeting market requirements.
Six sizes with max. delivery volumes of
0,6 m³/h (A 08)
1,2 m³/h (A 10)
3 m³/h (A 15)
6 m³/h (A 25)
18 m³/h (A 40)
32 m³/h (A 50)
make it possible to choose exactly the right pump for the specific application.
A variety of materials is available for the A-Series pumps:
Housing - PE, PE conductive, PTFE, PTFE conductive
Diaphragms - EPDM, PTFE/EPDM
Ball valves - EPDM, PTFE, stainless steel
Cylinder valves - PE, PTFE
A-Series pumps made of PE conductive and PTFE conductive meet the ATEX requirements of the directive 94/9/EG.
|
|
For a pump that can pass the acid test, consider the Marathon® M Nonmetallic Pump Series. Rugged, all-bolted construction. No clamps. Models in PVDF, Nylon, Conductive Acetal and Polypropylene. Specially-coated, chemically-resistant hardware. Optional spill containment and leak detection.
Product range from:
Pipe Size: .25" / 6mm
Displacement Per Stroke: .01 gal / .04 ltr
Max. Flow per Minute: 4 gal / 15 ltr
Max. Solids Handling: .03" / 1mm
Max. Discharge Pressure: 100 PSI / 6.9 BAR
To:
Pipe Size: 3" / 80mm
Displacement Per Stroke: .9 gal / 3.41 ltr
Max. Flow per Minute: 238 gal / 901 ltr
Max. Solids Handling: .71" / 18mm
Max. Discharge Pressure: 100 PSI / 6.9 BAR
|
|
The bellows pump is a pneumatic, self-priming pump. The fluid is pumped between the two chambers, airside and liquidside. This pump is adact for to transfer of ultrapure acids and solvents used in the semiconductor industry.
Their pumping frequency is much lower than an equivalent diaphragm pump and results in an extended life. Due to this low frequency and amplitude of the bellows pump, we guarantee a lower level of particle contamination. All PFD pump wetted components are manufactured with TEFLON® (PFA HP, PTFE and FEP). All other components are manufactured with high technology materials; e.g. PVDF and PEEK.
The use of material chemically inactive allows no ionic contamination. This pump is assembled in cleanroom.
Flow rate: 20 l/min
Max. suction head: 3,5 m
Max. air pressure: 5 bar
Max. back pressure: 4 bar
Max. air consuption: 13,5 m^3/h
Max. air connection: 4 mm I.D.
Weight: 4 kg
|
|
| ... products without technical information |
| |
The J+J electric actuator is widely used in the plastic valve market because it has a plastic housing making it light in weight, and as it has more standard features than any of its rivals, offers exceptional value.
The new J3 Series electric actuators offer an LED status light and plug & play conversion kits that change the function from on-off to failsafe, or modulating, or both.
|
|
|
Cam-Line plastic-lined trunnion ball valves offer the same proven design benefits as the Cam-Tite product line, including tight shut-off, reliable stem sealing, and unsurpassed torque reduction—all unique features in a plastic-lined ball valve design. With special Tefzel or polypropylene linings and option PVDF coatings, Cam-Line ball valves are well suited for highly corrosive applications within the chemical processing industry such as sulfuric and hydrochloric acid.
|
|
Rugged, Compact Design:
Hayward's rugged, low cost QIC2 all plastic PVC ball valves incorporate many design features found only on higher cost ball valves. Features such as PTFE seats, full porting and a 150 PSI pressure rating are all standard on every size of QIC2 ball valves.
Cost Sensitive Applications:
The QIC2 ball valve is perfect for OEM and other applications that require a reliable ball valve at an economical price. The QIC2 valve has been designed and tested to make certain it will perform year in and year out in the most demanding applications without leakage or failure. The internal components of the QIC2 ball valve are completely encapsulated inside the one piece valve body which means that the valve never requires adjustment. The QIC2 valve is ready to be put into service right out of the box.
Lightweight and Compact:
QIC2 lowcost ball valves are designed to fit into spaces too small for other valves. They are about 1/3 the overall size of a true union ball valve and they weigh an average of 50% less. This makes them ideal for skid mounted and other applications where space and weight are critical considerations.
Can't Rust, Won't Corrode:
Their all plastic construction means that they will never fail, stick, or jam because of rusted or corroded parts. And they'll work in places and environments where metal valves must be painted or coated just to survive.
|
|
The VKD is a True Union ball valve, particularly suitable for industrial applications, where high performances and long time reliability are a must.
The patented Seat Stop® system assures great longevity of the seals in situations where vibration or thermal expansion occurs. A micro-adjusting of the PTFE seals is also allowed.
As any accidental loosening of the ball carrier is not possible, the radial dismounting of the valve body can be done in full safety.
The new patented Dual Block® system allows a proper nut tightening, without any risk for unscrewing due to vibrations.
|
|
Design Features:
- Shown with KZCO's EH2 low voltage electric actuator
- 3/4" to 2" Full Port Single Valves
- Max PSI 150 @70F (Poly)
- Max PSI 300 @70F (Nylon)
- Wiring (most configurations available)
- NEMA 6P Actuator housing
- Ball: 316 SS
- Stem: 316 SS
- Valve Body: Polypropylene or Nylon
- Seat: Virgin PTFE
- Stem Seal: Dual VITON O-Ring
- Body Seals: EPDM
- FNPT or Flanged outlets available
- Quick Hairpin (QH)(1" Only)
|
|
The VKD is a True Union ball valve, particularly suitable for industrial applications, where high performances and long time reliability are a must.
The patented Seat Stop® system assures great longevity of the seals in situations where vibration or thermal expansion occurs. A micro-adjusting of the PTFE seals is also allowed.
As any accidental loosening of the ball carrier is not possible, the radial dismounting of the valve body can be done in full safety.
The new patented Dual Block® system allows a proper nut tightening, without any risk for unscrewing due to vibrations.
|
|
|
|
see the results for the following category
