|
|
Multi-stage vertical electric pumps of minimum overall dimensions, suitable for lifting plants with or without tank, irrigation systems and everywhere you need to reach higher pressure.
PERFORMANCES DATAS
93 models divided in 5 series with powers from 0,75 up to 30 kw.
Performances at 2900 rpm:
Q max: 40m3/h
H max: 315m
Temperature of the pumped liquid: min 0°C max +90°C.
TOLERANCES
Pump UNI EN ISO 9906 Appendix a
Motor: IEC 60034-1
|
|
APPLICATIONS
Compact multistage vertical electric pumps, suitable for lifting installations with or without autoclaves, fire-fighting installations, irrigation systems and wherever elevated pressures are required.CHARACTERISTICS
G20 cast iron spider.
G20 cast iron base.
X5CrNi1810 stainless steel pump pipe.
Thermoplastic polycarbonate diffusers.
Thermoplastic polycarbonate impellers.
AISI 431 stainless steel shaft.
Mechanical seal: sliding faces in hard metal, seals in ethylene propylene rubber.
EPDM rubber bushings.
Stainless steel sleeves with ceramic lining.SPECIFICATIONS
Maximum temperature of liquid 50°C.
Max. operating pressure 16 bar.
In-line connectors available on request, can be coupled to counter flanges.
Fitted with standardised vertical motor sized according to UNEL 13118; V8 arrangement; protected to IP55, class F insulation.
|
|
|
Vertical multistage centrifugal pumps for delivery of clean or slightly polluted liquids. Cantilever construction. Designed for tank installation. Immersion depth up to 800mm. Main fields of application: environmental protection technology, surface technic, filtration technic, coolant supply and as booster pumps. Synthetic versions for aggressive chemicals.
|
|
Single-stage vertical centrifugal pumps, suitable for transfer, recycling and distributing corrosive liquids and chemicals. The AS-series pumps are recommended for installation in cisterns, tanks or wells with variable head.
Materials: PP, PVC, PVDF, PE-HD.
Up to 3 meters long, depending upon the tank depth.
Suitable dimensioning of shafts, support columns and motor supports.
Nozzles with hose adaptor threaded or flanged.
Free of bearing bracket or intermediate bearings, it is guided by a pair of filled PTFE, ceramic or SiC wear bushings, and flushed by the liquid being pumped.
|
|
|
The vertical centrifugal pumps made in resin are high efficiency pumps for fixed installations with the pump immersed directly in a tank, operated by an electric motor in direct drive (max. 3000 rpm) for rapid emptying of fluid, with a flow rate of from 16 to 55 m3/hour. The particular form of construction of this pump, in addition to not using internal mechanical seals (subject to high wear), guarantees that any accidental leakage of the fluid is collected in the tank. The open rotor allows very dirty fluids, with an apparent viscosity of up to 500 cps (at 20°C) and small sized suspended solids, to be pumped with a continuous flow. The choice of the pump's composition materials allows you to determine the best chemical compatibility with the fluid and/or the environment without forgetting the correct temperature field.
|
|
The Metso Minerals VF froth pump has been designed to increase the pumpability of frothy suspensions. The principle of operation is similar to that of hydro- cyclone separation.
Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pump ’s conical sump.This results in more efficient pumping at higher capacities and a smooth operation, free from pulsations caused by airlocking.
Summary of design features
Integrated unit for layout flexibility
Smooth operation of the open vortex created in the sump and vertical "wet end" inlet prevents air locking
Cantilever design does not require submerged bearings or shaft seals
Bearing assembly with double protection sealing
arrangement to prevent ingress of slurry
Wear parts are available in a variety of different materials
Simplified maintenance
|
|
Characteristics
- Multi-stage vertical centrifugal pumps with diffuser type bowl.
- Francis vane enclosed impellers.
- Counter clockwise rotation viewed from coupling end (as an option).
- Basket or Conical strainer according to pump requirements.
Design Features
- Product or Oil lubricated.
- Large bowl shaft sizing provides longer life.
- Enameled bowls 5" thru 15".
Applications
- Deep Well & Irrigation.
- Sumps, Condensate (Can Pump).
- Fire Service.
- Municipal.
- Industrial.
|
|
Characteristics
■Multi-stage vertical centrifugal pumps with diffuser type bowl.
■Francis vane enclosed impellers.
■Counter clockwise rotation viewed from coupling end (as an option).
■Basket or Conical strainer according to pump requirements.
Design Features
■Product or Oil lubricated.
■Large bowl shaft sizing provides longer life.
■Enameled bowls 5” thru 15”.
Standard Construction Materials
■Bowls:
•Cast Iron Bowls.
•Bronze Impellers.
•416SST Shafting.
■Column:
•Carbon steel pipes and AISI-1045 carbon steel shaft.
■Discharge Head:
•Cast iron with 125-AISI flat face flanged connections.
•Fabricated steel with 150# and 300# AISI flanges as an option.
Operation Limits
■Capacity to 13,636 m3/hr (60,000 U.S. gpm).
■Head to 762 m (2,500 ft).
■Pressure to 76 kg/cm2 (1,080 psi).
■Temperature 121°C (250°F).
Applications
■Deep Well & Irrigation.
■Sumps, Condensate (Can Pump).
■Fire Service.
■Municipal.
■Industrial.
Ruhrpumpen Nomenclature
■VTP
■HQ
|
|
|
|
|
|
MULTI V/NEXIS V
Overpressure
BEACHES Of USE
Flows until: 140 m3/h
Heights mano. until: 240 m
APPLICATIONS
- In the processes of the trades of water and them
derived applications:
- skid of membrane filtration
- unit of disinfection by U.V.
- adduction, overpressure, transfer...
- washing high pressure
- protection fire
- swimming pool
- In agriculture:
- watering, irrigation
Pumped fluids
- Standard Range: nonaggressive clear liquids (drinking water, glycolée water...)
- Range 316L: aggressive liquids (sea water, demineralized water, chlorinated water...)
ADVANTAGES
- Hydraulic Whole out of stainless steel
- Optimized Reliability: outputs raised thanks to the profile of the wheels, limiting the number of stages, the size of the trees and thrusts
- Easy Installation: openings In line
- Process of disassembling/particularly easy reassembly
- Range 304: nonaggressive clear liquids (clear liquids and neutrals)
- Range 316L: aggressive liquids (sea water, demineralized water, chlorinated water...)
- Mechanical seal cartridge out of standard following model
|
|
|
TN Series pumps are designed to cover a wide range of pumping applications. They can handle thin and heavy liquids containing abrasives and bits of solids, while maintaining consistent and dependable flow. Except for 24" and 36" models, pumps are designed so that there are no bearings or seals in the liquid, making them virtually maintenance-free.
|
|
Floway Pumps' Vertical Hydrocarbon Pumps are built around the versatility of the vertical pump design for the API industry. Our extensive line of low NPSHR impellers allows us to meet demanding NPSHA requirements.
Features / Benefits
- Compliant with API 610 current edition
- Multi-staging in the medium specific speed range
- High pressures with premium efficiences and low operating costs
- Low NPSH first stage construction with Nss below 11,000
- Pressure and flow variations are achieved by changing number of stages or impeller type
- Pump bowl assembly is characterized as low energy per stage resulting in a broad flow range with excellenct hydraulic stability
- Thrust balanced impellers are available for pump axial thrust reduction and assist in obtaining the desired thrust bearing rating/life
- Thrust pot assembly is available in applications where non-thrust carrying motors are required
|
|
|
|
|
|
The VI line heavy duty process pumps, are vertical single stage type
with a side discharge column
These pumps are specifically used on sump applications.
Pump components geometry optimised through hydraulic, structural, thermal and dynamic F.E.M. analysis lead to an high product reliability.
Closed type impeller with front and rear wear rings as well as balancing holes, to minimise the axial thrust.
Large eye single suction 1st. stage impeller to meet low NPSH requirements.
Deep stuffing boxes, designed in accordance to API 682 Std., suitable to accept any type of mechanical or packing seal.
Labyrinths and deflectors at either bearing housing to maximise protection against dirt.
A wide range of sizes and material combinations complete the variety of the offered product.
Main design features
Fully designed according to latest edition of API 610 Std.
Pump shaft fully machined to respect the more restrictive run-out API limits.
As a standard, the rotor axial thrust is supported by a duplex oil lubricated ball angular contact type bearings.
Discharge column, line shaft and support column may consist of multiple sections, depending upon the pump setting. Discharge column mounted with a sliding fit through the sole plate to account for thermal expansions.
Renewable intermediate bushings, lubricated by the same pumped fluid or from an external source, are provided in correspondence of all column sections.
|
|
|
With high delivery rates and heads, FLUX centrifugal immersion pumps combine maximum efficiency with a robust and reliable construction, resulting in a pump that provides the ultimate in process security, especially for transferring corrosive or abrasive fluids. Main fields of application are the chemical industry, chemical engineering, electroplating, PCB manufacturing, fresh and waste water treatment.
|
|
Goulds Model 3910 API 610 (OH3) vertical in-line pump provides benefits of low installation costs and space savings...without compromising reliability, maintainability, safety or hydraulic performance.
Back Pull-out for ease of maintenance.
Bearing Frame carries pump loads.
FramehookTM allows safe and easy removal of back pull-out assembly (patented).
Standard Spacer Couplings used for all applications.
In-Line Design for space and cost savings.
Motor Support Rugged fabricated steel, maintains positive shaft alignment. Available motor support. Unique frame-mounted motor support improves maintenance access.
Capacities to 7500 GPM (1700 m3/h)
Heads to 750 feet (229 m)
Temperatures to 650° F (343° C)
Pressures from full vacuum to 595 PSIG (41 bar)
|
|
Everything at Lutz revolves around safety and environment protection. Our centrifugal pumps guarantee the safe transfer of aggressive, corrosive and other hazardous acids and bases.
Lutz centrifugal pumps B50, B6 and B80 are particulary suited for the electroplating industry, waste water treatment, chemical industry, water conditioning and gas scrubbers.
The different sizes, types and material combinations of the vertical submerged pumps provide the range needed to cover all applications.
- Delivery rate up to 160 m³/h
- Delivery head up to 65 m
- Immersion depths up to 3000 mm
- Mousing materials: PP, PVDF, PVC or Stainless Steel
|
|
TCH. TCT, TCA pump series are available for vertical installation with lateral discharge flange.
The main design features are:
Lengths are from approximately 500 mm to 3000 mm with or without intermediate support sleeve.
Available materials of constructions are same as for the horizontal mounted pumps.
Depending upon the applications the sleeve bearings can be carbon, bronze or impregnated
Teflon materials.
Pump casing, impeller and casing cover are the same as for the series TCH, TCT, TCA.
The standard rectangular base can be modified to accommodate specific requirements.
Standard shaft sealing is by radial seal rings. Packed stuffing box or mechanical seal shaft sealing are available upon request.
Lantern for monoblock design is available for B5 or V1 motors up to 110 kW.
Internal sleeve bearing flushing is standard but provision for flushing from an outside source is provided.
Filter screen can be fitted at suction side upon request.
|
|
Applications:
Surface treatment
Transfer of chemicals
Agitation of chemical tanks
Cosmetics industry
Salt water
Metallurgy
Vertical design: Assembly immersed in bath
Pump body made of injected plastic (Polypropylene or PVDF) Excellent resistance to strong acids and bases
Max. fluid temperature = 80°C (PP), 110°C (PVDF)
Closed centrifugal pump impeller with diffuser:
Very good efficiency
Max. flow rate up to 23 m3/h
Max. pump-out height up to 19 m
Impeller driven by a back-balanced, bearing-less drive shaft (T50/200 and T72/202) No gaskets ; no risk of leaks
No wearing parts
Impeller driven by a long drive shaft with ceramic / ceramic bearing (T101/201): No gaskets ; no risk of leaks; Drive shaft height up to 756 mm
Version with counter-impeller (T72/242) Operation possible outside bath
|
|
Pumped Liquid
Lube oils
Main Fields Of Application
Main lube oil pumps for diesel engines in shipbuilding and stationary power stations
|
|
ALG series single stage single suction pipeline centrifugal pump are designed by scientific and technical personnel of our company and domestic water pump experts, which select the domestic excellent hydraulic model, adopt the performance parameter of the centrifugal pump of Model IS. Besides, according to different using temperature and medium, we develop pumps applicable for hot water, high temperature the corrosive environment, oil transporting on the basis of Model ALG
- Suitable for industry and city's giving and draining off water
- It is convenient to form a complete set with other apparatus
- High efficiency, low noise
- There are cold water types, hot water type, high temperature type, chemical industry type, oil type
- Performance is reliable
- International standard
|
|
Vertical Multistage Electric Pumps
SV Series SV 2, SV 4, SV 8, SV 16
Market sectors
civil, agricultural, light industry, water treatment, heating and air conditioning
Market sectors
- Handling of water,free of suspended solids,in the civil, industrial and agricultural sectors
- Pressure boosting and water supply systems
- Irrigation systems
- Wash systems
- Water treatment plants
- Handling of moderately aggressive liquids, demineralized water,water and glycol,etc.
- Circulation of hot and cold water for heating,cooling and conditioning systems
- Boiler feed
Materials
- Suitable for handling potable water (WRAS certified)
|
|
* Bearing-free, sealless design for leakproof, trouble-free operation.
* Designed to pump acids, alkalies, caustics, bleaches, sea water, solvents and other harsh liquids.
* Stainless steel exterior hardware.
* Handles temperatures to 210°F (99 C).
* Corrosion resistant, fan cooled motors.
* Twin impeller design for high volume circulation and leakproof operation.
* High strength molded pump body for vibration free operation annd extended pump life.
* Portable for easy transfer between working areas.
* Easy maintenance.
* Convenient mounting panel for easy mounting to tank.
* Ideal for OEM applications.
* Made in U.S.A.
|
|
|
|
|
|
The centrifugal immersion pumps of building group 4 are used for wet-pit operation in containers, pits and tanks. Centrifugal immersion pumps for dry-well installation, i.e. to be installed and operated outside the container, are also available.
All components of pumps in plastic design that are in contact with the fluid are made of PP or PVDF. The pump shaft consists of a motor shaft made of stainless steel and a shaft-protecting tube of either PP or PVDF. Built-in elastomers are made of FPM (or also EPDM without surcharge). Centrifugal immersion pumps are equipped with overhang shafts so that there is no need to provide for shaft bearings in components that are in contact with the fluid. Thus, the pumps are safe to run dry and do not require regular service and maintenance.
There is no need of a mechanical sealing of the shaft. Only a so-called gas seal is installed beneath the motor to prevent aggressive vapours from penetrating the motor chamber. But this seal is never in contact with the fluid delivered.
- For aggressive and neutral liquids
- For short-term and continuous operation
|
|
Vertical centrifugal immersion pumps
Seal lots and safe to run dry Solid plastic vertical centrifugal immersion pumps are used predominantly space-saving by direct installation into industrial environments. For strongly crystallizing media, centrifugal immersion Pumps are supplied with a special seal to avoid the penetration of steam and the connected crystallization. Standard depths of immersion are ranging from 200 mm up to 500 mm. Depths of immersion up to 1000 mm are possible by the means of an intermediate bearing
Fluids delivered:
- Acids, bases and mixtures
- Solvents
- Alkaline degreasing baths
- Electroplating baths
- Foto chemicals
- Radioactive, aseptic and precious liquids
- Food stuffs
- Other low-viscosity fluids
Fields of application:
- Electroplating
- Etching and cleaning plants
- Refrigerating machines
- Solar systems
- Sewage and water treatment
- Foto industry
- Textile and food industries, etc.
|
|
Type: single-stage, single-flow, open impeller
Head: up to 35 m
Flow rate: up to 800 m³/h
Pressure: up to 10 bar
Temperature: up to 60°C
|
|
SPP Pumps have been manufacturing fire pumps for over 130 years with one of the widest range of approvals of any manufacturer in the world. Experience gained from extreme environments such as off-shore oil & gas installations has led to the creation of the SPP UL Vertical In-line range of fire pumps approved for fire protection by Underwriters Laboratories and fully compliant with NFPA 20.
The SPP line of vertical in-line fire pumps are lightweight and compact for smaller pump rooms. They eliminate the need for coupling alignment and there are fewer lost or misplaced parts.
|
|
Every wetted component in a Vanton SUMP-GARD® vertical pump, including the heavy-wall shaft sleeve, is offered in PVC, CPVC, PP, PVDF, and other non-metallic materials compatible with the pumped fluid. This eliminates corrosion and minimizes abrasion, resulting in lower maintenance, longer pump life, and contamination-free products. SG pumps are configured for sumps to 50 ft. (15 m) deep, and handle flows to 1450 gpm (330 m3/hr), heads to 245 ft. (85 m), and temperatures to 275°F (135°C).
SUMP-GARD pumps are ideal for the transfer and treatment of process fluids, plant effluents and industrial or municipal water and waste streams. They are available with vortex pump heads to pass sludges, slurries and stringy materials as well as fluids with solids to 3 inches (75 mm) in diameter
|
|
Vertical Industrial
Turbine Pump
Flows to 70000 GPM (4760 m3/Hr)
Heads to 3,500 feet (1,060m)
Pressures to 2500 psi (75kg/cm2)
Bowl sizes from (6" to 55")
Temperatures to 500° F (260° C)
Horsepower to 5000 HP (1860 KW)
Design Advantages
Fabricated discharge head and flanged column.
Flanged bowl construction.
416SS shafting.
Alloy construction with external flush of critical wear areas available for corrosive/abrasive services.
Built-in alignment and simple piping for less costly installation and ease of maintenance/ reduced downtime.
Services
Cooling Water
Seawater and River Water Intake
Industrial Process Pumps
Utility Circulating Water
Condenser Circulating Water Pumps
Ash Sluice
|
|
Features
* High efficiency impellers and bowls
* Vibration-free performance
* Low submergence
* No priming required
* Dry pit/Wet pit arrangement available
* Direct drive/Right angle gear drive
* Impeller pull-out/Non-pull-out
* Bowl pull-out/Non-pull-out
* Gland packed / Mechanical seal
* 50Hz / 60Hz availability
Applications
* Water supply
* Irrigation
* Cooling tower
* Thermal and Nuclear power plants
* Steel, Cement industries
* Refineries
* Sea water on off-shore platforms
* Condensate extraction
* Fire fighting
* Flood control
* Dry Docks
Range
* Delivery size up to 2200 mm
* Capacity up to 40,000 m³ /hr
* Head up to 200 metres
|
|
|
|
|
|
Griswold Vertical Turbine Pumps are available with two types of pump drives . . . vertical hollowshaft electric motor drive or right angle gear drive. Our turbine pumps offer you a choice of two types of lubrication . . . either a water lubricated line shaft or an oil lubricated line shaft construction.
To fit various applications, Griswold discharge heads are available either cast for above ground discharge or fabricated for various discharge configurations. Depending on pumping requirements, our pump bowls are available in 6”, 8”, 10”, 12” and 14” diameter.
Impellers available in the various bowl assemblies are of different designs and sizes. All impellers are precision designed, engineered and finished to give highest efficiency. Our impellers are made of high-strength bronze, machine, hand finished and dynamically balanced for top performance and long life.
We manufacture a large variety of impeller and bowl designs. This makes it possible for us to fit most any job from 60 to 3500 gallons per minute . . . low or high head . . . open or pressure discharge.
|
|
|
|
|
|
SPP's Lowest Life-cycle Cost Series of single and multi-stage Vertical Turbine pumps have been designed for longevity and incorporate many standard features, which facilitate ease of maintenance. A spacer coupling between the thrust bearing assembly and seal chamber allows a cartridge mechanical seal to be removed without dismantling the headpiece and removing the driver. Easily removable keyed muff type couplings connect all shafts, facilitating disassembly of the whole pump unit with minimal risk of damaging expensive component parts.
High-grade standard materials of construction and a rugged stiff shaft mechanical design coupled to state of the art hydraulics, offer unrivalled longevity and the lowest cost of ownership.
TYPICAL APPLICATIONS:
Water Treatment & Supply
River Water Extraction
Borehole Deep Well Extraction
Drainage & Irrigation
Cooling Tower Circulation
Process & Industrial utility duties
Petrochemical utility duties
Condensate Extraction
Sea Water lift
Power Plant utility duties
|
|
|
|
