|
|
Sidel secondary packaging conveying systems have been designed to respond to the diversity of secondary packaging (format, type, materials).
They can handle every kind of secondary packaging: full or empty cases, cardboard boxes, crates, trays, hi-cones and shrink-wrapped multipacks (champagne or petaloid base) with the utmost product care, even for varnished cardboard boxes.
Entirely built from stainless steel for robustness and cleanability, their design has also been focused on reliability by reducing maintenance needs to the minimum.
|
|
Fixed Direction Pallet Handling Conveyors
Air-Chain Accumulation Conveyors
Features:
Can handle virtually any pallet in any orientation
A single motor can power up to 100 ft. of conveyor
Center-mounted transport chain eliminates pallet drift
Quiet operation from chain movement on a glide surface
Technical Data
Weight capacity 350 to 3500 lbs.
Minimum height 18 inches
Speed 40 ft./min.
Air Pressure 30 psig max.
Rollers/Wheels 3 inch diameter on staggered wheel centers are ideal for GMA pallets with the narrow side leading (bottom boards perpendicular to direction of flow)
--------------------------------------------------------------------------------
|
|
The double chains, working in parallel, are used to transport the goods.
Technical Data:
- Frame: extruded aluminium profiles, 200 mm high Traverses and supports made from steel profile
- Chain: 2 Duplex chain 5/8" x 3/8" DIN 8187
- Max. speed: 0,3 m/sec.
- Motor: slip-on gear motor
- Bearings: high quality ball bearings, maintenance-free
- Side guides: galvanized steel pipes
- Support legs: made from steel profiles, height adjustable by thread ± 25 mm
|
|
Chain conveyors to handle multiformat pallets
Mechanical welded frame : steel (painted), stainless or galvanized
2, 3, 4, 5 or 6 chains are available
Conveying height : From 350 mm to 800 mm ± 60 mm
Load by pallet : 2 tonnes maxi (MARCEAU standard)
|
|
MODEL CD280
2-STRAND CHAIN DRAG CONVEYOR
Chain drag conveyors convey heavy duty unit loads and often are suited for products with unusual conveying characteristics such as pallets or specialty tote pans. Unit shown features OPTIONAL structural construction
|
|
KABELSCHLEPP scraper conveyors are the solution for small and short chips:
* Frequently used for machining of non-ferrous metals
* Can also be used for very hard, short chips
* Casting chips, milling chips and sawing chips
Transport of the material takes place via drivers which push the material along the floor of the housing towards the discharge. Cooling lubricants are collected in the conveyor housing and can be fed back into the machine circuit via an added-on container or a pumping unit.
Our scraper conveyors can be used as standalone conveyors at machine tools or as linked conveyor systems. Depending on the design, the material to be conveyed is brought to the required height at a defined incline and then discharged.
|
|
|
The flexibility of the uni Flex chains ensures a great mmiber of possibilities for applications in various industries. Most of the uni Flex chains are flexible in several directions and some of them can be used in veiy small curves with turn discs, which makes construction of very compact conveyors possible. The uni Flex chains are suitable for conveying of plastic bottles, cans and cartons in e.g dailies and breweries, but also for conveying of crates and other large items.
|
|
With KABELSCHLEPP hinged belt conveyors we can solve your disposal tasks in over 80% of all cases:
* Wet or dry chips
* Workpieces and waste
* Hot forgings
* Stampings and punching scrap
* And much more
Transportation of the material takes place on the upper trough of a revolving hinged belt. Drivers ensure transport of the material up the inclined section. For wet machining the cooling lubrications are collected in the conveyor housing and can be fed back into the machine circuit via an optionally available coolant container or a pump station.
Our hinged belt conveyors can be used either as stand-alone conveyors at machine tools, or as linked conveyor systems. Depending on the design, the material to be conveyed is brought to the required height at a defined incline and then discharged.
|
|
|
|
|
|
7400 SERIES Straight Plastic Chain Specifications:
Belt widths: 152mm to 1524mm
Lengths: 914mm to 25.4m
Load: 90 kg / square meter of belt
Belt speed: 71 meters/min maximum
Frame material is 304 stainless steel
Bearing material is 400 stainless steel
Bearing lubricant is H1 type FDA lubricant
Wear Strip Material is solid UHMW
Welds are continuous TIG
7400 SERIES Curved Plastic Chain Specifications:
Belt widths: 152mm to 914mm
Total Lengths: 914mm – 30m
Load: up to 90 kg / square meter of belt
Belt speed: 45 meters/min maximum
Frame material is 304 stainless steel.
Degree of curves: 15º - 180º
Features & Benefits:
Frame is constructed of continuous TIG welded 304 stainless steel and is designed with no horizontal surfaces for optimum cleaning.
All bearings are 400 stainless steel, filled with H1 FDA lubricant and mounted in cast stainless steel housings for maximum performance in washdown environments.
Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
Belt tracking mechanism is constructed of 304 stainless steel and is externally mounted to the frame with adequate clearances for cleaning. No external threads are used.
|
|
Often used for large sized products, this conveyor allows, with one motor only,
to feed automatic assembly and welding machines.
For the big volumes, the bottom return is a real benefit in place and coast.
It is sometimes used for assembly kits : an opérator loads components on the
pallet devise out of the safety limits and the conveyor brings them to the automatic
station.
|
|
Often used for small sized products, this conveyor allows, with one motor only,
to feed automatic and manual assembly machines.
It is often used as a buffer, cooling or heating corridor, packaging,
with his high positioning accuracy .
The pallet device allows to preserv the products aspect and quality ,
it is also a good location guarantee.
BENETITS: saves place
accuracy: +/-0.1mm
auto-cleaning when the pallet returns.
|
|
APRON CHAIN CONVEYOR
Technical Characteristics
- Bed in folding profile without retention, 2mm thick
- Acetal chain in different widths (from 82.5 to 304mm )
- Watertight resin bearings
- Return of chain on revolving rollers
- Curve in compact polyethylene profile with greasers
- Driven by sprocket and chain under boot or motor in direct drive
- Stainless steel or stainless steel/painted steel equipment
- Fully modular or transformable conveyors
- Standard equipment available with short delivery times
Function
Enables the transport of unit or packed products with built-in curves and inclinations. It is possible to fit a roller chain onto the conveyor to obtain an accumulation function.
|
|
The rectilinear and curvilinear conveyance system called C136 is characterised by a technopolymer table top chain. It allows perfectly conveying products with a rigid base of medium weight and size for a maximum chain width of 300 mm.
Components – They fully and effectively satisfy the requirements for spare parts of our C136 SERIES chains, pinions and sliding guides.
|
|
CONVEYERS HAS CHIPS TO MEASURE
3 families of conveyers, adapted to all types of machines and the various types of chips:
- Carpet Conveyer
- Drag Scraping conveyer
- Magnetic Conveyer.
SERVICE ACTIVITY:
- Handing-over with nine of conveyers of chips
- Preventive Maintenance
- Supply of Spare parts
Your used or broken Conveyer existing, is dealt with by our teams and is given to nine guarantee under 15 DAYS.
Less expensive than the purchase of a new conveyer
Handing-over with nine in less than 2 weeks
Guarantee minimum 6 months
|
|
CONVEYERS HAS CHIPS TO MEASURE
3 families of conveyers, adapted to all types of machines and the various types of chips:
- Carpet Conveyer
- Drag Scraping conveyer
- Magnetic Conveyer.
SERVICE ACTIVITY:
- Handing-over with nine of conveyers of chips
- Preventive Maintenance
- Supply of Spare parts
Your used or broken Conveyer existing, is dealt with by our teams and is given to nine guarantee under 15 DAYS.
Less expensive than the purchase of a new conveyer
Handing-over with nine in less than 2 weeks
Guarantee minimum 6 months
|
|
Walker Magnetics supplies magnetic units with a variety of strengths and designs which, if chosen correctly, will solve most magnetic conveying problems.
All magnets have a non magnetic base plate to enable easy assembly on your construction. The face of the magnetic units is covered in stainless steel on to the conveying medium runs directly.
All magnetic units are clearly marked with the N=North pole on one side.
To ensure trouble-free running, all North poles should be fitted mostly on the right handed side in running direction of the conveyor. The following types of standard units are the most common, but every type can be delivered in each magnet strength.
|
|
Dual Strand Transportation Conveyors and Dual High Roller Accumulating Storage Conveyors represent an economical solution to storage and product delivery when a pallet, skid or fixture can be placed on the chains. SSI builds many different types of Dual Strand Conveyors to handle most every product having a conveyable surface, varying from small boxes to steel mill applications.
Dual Strand Conveyors are equipped with escapement devices to gently collect and release loads from accumulation. Liftveyors, lowerators, up-enders, turntables and transfer devices can be incorporated into the design of a Dual Strand Conveyor for assembly, process, storage and delivery.
|
|
Liebherr offers a broad material handling program for a variety of applications.
Accumulating conveyors
The accumulating conveyors are designed for the direct and indirect transport of workpieces onto pallets. Because of indivdually connected conveyor sections, the transport length can be extended any time if desired. The pallet return is performed by lifting and lowering stations. Because of their accumulating ability, they are indexing independent.
|
|
The basic facts make VarioFlow, the new chain conveyor system from Rexroth, a compelling new option: It is more economical than other chain conveyor systems and offers substantially better performance.
Extreme load capacity
Its extraordinarily stable chain allows VarioFlow to achieve chain tensile forces of up to 1,250 N. The nearly closed chain surface allows even small components to be conveyed without complication. An extensive range of conveyor modules provides solutions for the most diverse conveying tasks.
Adapts quickly to any task
An outstanding VarioFlow characteristic is easily it adapts to specific tasks. VarioFlow masters even the most difficult layouts where other conveyor systems fail. On-site adaptation to complex applications is a breeze, and usually requires the exchange of just a few components, such as the chain or the slide rails.
|
|
The toothed chain conveyors are designed for direct transport of workpieces with an uneven surface (e.g. pins or collars), that may touch during transport. Based on their accumulating ability, they are indexing independent.
The individual sections can be connected so that the tooth chain conveyors can be extended to any length, and based on their accumulating ability, they are indexing independent
|
|
Engineered to handle metal chips and fines. Designed for abrasive materials, wet or dry. Heavy-duty forged steel drag chain carries abrasion resistant steel flights to convey and elevate difficult materials. Liquid tight construction, infeed hoppers and multiple discharge points available.
Conveyor Features:
- Heavy-duty rivetless chain
- A.R. steel wear surfaces
- Safety covers - standard
- Coolant pumps as required
|
|
CHAIN-ON-FLAT CONVEYORS
SSI Chain-on-Flat drag chain conveyors offer an economical and unobtrusive way to move products through assembly.
|
|
|
The indexing chain conveyors are designed for the transport of shafts such as crankshafts, camshafts, or axis shafts on workpiece supports. The forward motion can be selected in different indexing units.
|
|
Series 1700 and 2500 conveyors are single rail palletized conveyors. They are designed to provide a highly effective and flexible factory automation solution for parts up to 250 lbs. at the best cost of total ownership (acquisition, installation, maintenance, and modification cost).
Tech-Trak® conveyors provide a modular and flexible way to create platforms for any number of factory automation solutions. Such platforms are typically used for multiple applications and operations integration.
The combination of flexibility and total cost of ownership has over the years led to a very large installed base of Tech-Trak® across a wide range of applications in multiple industries. Tech-Trak® conveyors have a solid performance track record. They have demonstrated the highest uptime in their category.
|
|
The plastic chain conveyors are designed to transport any number of unevenly-shaped workpieces without them touching each other. The workpieces are transported on pallets. Modular corner pieces mean that any type of conveyor shape is possible. Parallel machines are connected using satellite units.
The individual sections can be connected so that the plastic chain conveyors can be extended to any length, and the queue effect means they are independent of timing.
|
|
"Slat conveyors employ one or more endless chains to which non-overlapping, non-interlocking spaced slats are attached." -CEMA
Continuous moving or indexing, flush with the floor or at working height, SSI Flat Top and Slat Conveyors are ideal for conveying and/or assembling large heavy products, such as automobiles, heavy trucks, earth moving equipment, steel coils and commercial air conditioners, snowmobiles, ATV's, motorcycles, or for the assembly of engines, brakes, axles, transmissions, compressors or other components.
SSI can provide Flat Top and Slat Conveyors from a few inches up to 16 feet wide, and with chain pitches from 2 inches up to 2 feet. A wide range of stationary or adjustable fixtures can be mounted to the slats to hold and locate the products
|
|
The hinged chain conveyors are designed for direct transport of workpieces with an even surface, that may touch during transport. For workpieces which are heavy or do not have an even surface, a multiple lane design is possible.
Through the connection of individual conveyor sections, the slat chain conveyors can be expanded as desired and are indexing independent because of their accumulating ability.
|
|
Table Top Chain Conveyors
Table Trak™ is a table top chain conveyor intended for material handling applications where there is no requirement for pallets and part-on-part impingement is allowed.
Key Features:
- Single and dual chain
- Widths up to 12” in 2” increments
- Several chain types available including “zero-gap”
- Modular stops, positioned anywhere along the length of the conveyor
- Curves: 30°, 45°, 90°
- Shuttles
- AC drives or variable speed DC options
- Uses Tech-Trak® legs
|
|
|
|
