|
|
Container Hook VCH 20 with Safety Locking Device
Suitable for ISO container edges. With a patented safety locking mechanism. A clevis connection for the 22 mm VIP chain. Using a VRG - 16 connector, the chain diameter can be reduced and thus a 16mm VIP - chain can be used .
Attention: RUD-VCH 22-Hooks are not suitable for vertical lifting. Given a minimum inclination angle of 30° during the lifting process, the hook cannot automatically open.
Connecting bolt and tensioning sleeve are pre-assembled.
|
|
Matter, completion:
Steel phosphated with manganese. Button pressure: aluminium. Example of order: nlm 07780-2110x50
Foot-note: L´anneau of lifting to autobloquant bolt is equipped d´une mobile manille: It constitutes a tool for lifting fast and simple to handle. To press the button for déverouiller balls of the bolt and to slacken it to obtain a sure locking.
|
|
|
|
|
|
The essential link in any safety system
Connectors vary according to their shape, size and locking system. The size of the gate opening determines what they can be clipped to.
Aluminum carabiners are made of an alloy ensuring an excellent strength to weight ratio. Since they are lightweight and will not interfere with progression, they can be used on harnesses, at the end of a lanyard or to construct temporary anchors.
The heavier steel connectors are most often used in anchor systems. Quick links can be left in place for extended periods of time.
The Petzl difference
1- 2- Manual or automatic locking
Petzl offers two types of locking systems:
- manual, which requires the user to lock the gate closed,
- automatic, which automatically locks the gate closed.
The automatic locking system is recommended for carabiners that are used frequently.
The manual system is recommended for dirty environments (mud, ice).
3- Keylock System
All aluminum Petzl carabiners use the Keylock system. The body / gate interface does not have a hook that could snag on anchors, ropes, harnesses, etc.
4- Different shapes for different uses
Symmetrical, small or large pear-shaped or D-shaped, each form corresponds to a specific use: to connect a device to a harness, attach a pulley or to use at the end of a lanyard, etc.
|
|
|
Snap hook zycral car Conforms to the standard INTO 362.
|
|
| ... products without technical information |
| |
|
Miniature connectors (also referred to as "Mini DIN"), including S-VHS, and DIN connectors according to DIN 455321, mating compatible to IEC 60130-9. 3-8 poles. For signal and load currents up to 4 A.
|
|
ABXS. With its ingenious ball-bearing coupling mechanism, the ABXS Miniature Push-Pull Connector is easy to use and provides a reliable interconnect for signal and power in audio, control and instrumentation applications. The range has two shell sizes housing 3 to 9 gold plated contacts in a range of aesthetically pleasing long life shell finishes.
The ball-bearing mechanism provides easy connection by pushing on the back accessory and easy disconnection by pulling on the coupling nut. The connector cannot be disconnected by pulling on the cable or backshell using normal force.
The shells are made from copper alloy with a choice of finishes in bright nickel or black epoxy.
|
|
|
Mencom Corporation manufacturers a full line of receptacles for mating with quick disconnect cord sets. The product line includes front mount, rear mount, PCB mount, through mount, and solder type receptacles. The receptacles can be ordered with either Metric, PG, or NPT threads.
|
|
|
The quick-connect S12 x 1 is fully compatible with your terminals. You can replace the standard M12 round connector easily without having to adapt the complement. The S12 x 1 is a quick and safe solution for your industrial application.
|
|
QUIK-LOC 600 VOLT CONNECTORS
Electrical Parameters
3 or 4 contacts; with or without pilot circuit contacts. #8 AWG through 500 MCM cable. Up to 600 Volts; 625 Amps.
The Quik-Loc Connector was designed for service under the most severe mining conditions. Constructed of resilient neoprene and sturdy neoprene covered alloy castings, it is tough, watertight, corrosion-resistant — practically indestructible.
ELECTRICAL PARAMETERS 3 POWER GROUND AND 2 PILOT CONTACTS, #8 THROUGH 500 MCM CABLE UP TO 1000 VOLTS; 500 AMPS.
|
|
| ... products without technical information |
| |
|
|
|
|
The essential link in any safety system
Connectors vary according to their shape, size and locking system. The size of the gate opening determines what they can be clipped to.
Aluminum carabiners are made of an alloy ensuring an excellent strength to weight ratio. Since they are lightweight and will not interfere with progression, they can be used on harnesses, at the end of a lanyard or to construct temporary anchors.
The heavier steel connectors are most often used in anchor systems. Quick links can be left in place for extended periods of time.
The Petzl difference
1- 2- Manual or automatic locking
Petzl offers two types of locking systems:
- manual, which requires the user to lock the gate closed,
- automatic, which automatically locks the gate closed.
The automatic locking system is recommended for carabiners that are used frequently.
The manual system is recommended for dirty environments (mud, ice).
3- Keylock System
All aluminum Petzl carabiners use the Keylock system. The body / gate interface does not have a hook that could snag on anchors, ropes, harnesses, etc.
4- Different shapes for different uses
Symmetrical, small or large pear-shaped or D-shaped, each form corresponds to a specific use: to connect a device to a harness, attach a pulley or to use at the end of a lanyard, etc.
|
|
|
Snap hook zycral car Conforms to the standard INTO 362.
|
|
| ... products without technical information |
| |
Specialty - Quick Engage
IDEAL® Surelock 48 Series
Surelock’s bind-free pull-through design makes installation quick and easy. Captured screw design makes engagement and final tensioning trouble free. Extended housing embraces 25% more screw threads than competitive designs.
Specialty - Quick Engage
IDEAL® Surelock 49 Series
All 316 stainless steel series. Surelock’s bind-free pull-through design makes installation quick and easy. Captured screw design makes engagement and final tensioning trouble free. Extended housing embraces 25% more screw threads than competitive designs.
|
|
ACOCLIP clamp is manufactured by a continuous threaded
banding with raised, rounded edges to prevent damages to the
pipe.
First feature of this clamp is the tilting housing, with screw.
This system allows an easy and quick application thanks to the
automatic locking that forms the right diameter of the pipe.
Ideal system for industrial applications of flexible ductings.
MATERIALS AND SIZES
Band: width 9 mm, thickness 0,6 mm,
stainless steel AISI 430.
Screw: size 7 mm, cross slotted-hexagon head,
galvanized steel (180/200 hours resistance against
saline mists).
Upper and lower housing: low carbon steel, nickel plated.
|
|
ACOSTRIP is the universal banding system of ACOCLIP type.
30 m continuous band packaging in ABS plastic dispenser.
The locking device is made with tilting housing, with screw.
ACOSTRIP :
MATERIALS AND SIZES
30 m band: width 9 mm, thickness 0,6 mm, stainless steel AISI 430.
ACOLOCK :
ACOLOCK LOCKING DEVICE
Upper and lower housing: low carbon steel nickel plated.
Locking mechanism: stainless steel AISI 430.
Screw: size 7 mm, cross slotted-hexagon head, galvanized steel
(180/200 hours resistance against saline mists).
Packaging: 2 plastic bags of 25 pcs, for a total of 50 pcs. in 1 box.
Screwing torque: as ACOCLIP clamps.
|
|
| ... products without technical information |
| |
All-purpose medium pressure series MD
Features:
The series MD comprises double shut-off couplings in nominal sizes from 6 to 50 mm. This series is available in different materials with various surface coatings.
Key Benefits:
• unlocking device
• universally applicable
• extremely hard-wearing & durable
• various seal materials
• variety of optional equipment
• broad spectrum of connection types in the standard version
• ring grips optionally available for large nominal sizes
Nominal sizes:
6, 7, 12, 19, 25, 32 and 50 mm
Media:
• water
• compressed air
• diverse fluids
• fuel
• lubricating greases
• hydraulic oils and many more
Pressure Range:
up to 250 bar (depending on nominal size and material), partially suitable for vacuum
|
|
24 KA series
Durable, single hand quick connect coupling made of brass. The sealed sleeve prevents dirt from reaching the internal parts. The construction is based on the 26 series, which has proven its worth many times over the years and can be used for a multitude of applications.
Advantages: Single hand operation and a multitude of connecting options.
Applications: Air tools, automotive, compressed air, mechanical engineering, compressors.
Working Pressure: PB = 35 bar, maximum static working pressure with safety factor of 4 to1.
Working Temperature: -20°C up to 100°C (Buna N), -40°C up to 120/150°C (EPDM), -15°C up to 200°C (Viton®), depending on the medium.
|
|
225 KL series
The 225 KL coupling system was developed for the chemical and beverage industries for filling and draining containers. There is no leakage loss whatsoever during the connecting as well as the disconnecting process. The EPDM seals conform to the FDA regulations.
Advantages
High flow rates, easy to clean, simple to dismantle, moving parts are encapsulated and external to the product flow. The screwed connection allows manual connection even at a pressure of 4 bar.
Applications
Pharmaceutical, food and beverage.
Working Pressure: PB = 16 bar, maximum static working pressure with safety factor of 4 to1.
Working Temperature: -40°C up to 120/150°C (EPDM), -15°C up to 200°C (Viton®), 0°C bis 316°C (Kalrez®) , depending on the medium.
|
|
|
Inflatable Packaging Air-Lock™ Truck Dunnage Air Bags™ combine excellent performance with considerable cost savings over competing dunnage bags. Air-Lock™ Truck Dunnage Bags are designed to brace and secure loads in transit. Inflatable Packaging brings many new features to truck dunnage. Unlike paper or vinyl, IPI uses a transparent polymer film. This unique film gives Air-Lock™ Truck Dunnage Bags weight and handling advantages over competing bags. In addition to delivering superior performance Air-Lock™ Dunnage Bags provide the lowest overall cost in the industry. Air-Lock™ Truck Dunnage Bags are a cost effective alternative to other dunnage bags.
|
|
|
|
|
|
Riutilizzabili bags are planned in order to prevent the movement of the goodses and therefore in order to avoid the conveying damages. Our Bags wide are used in many different Societies and theirs I use comprises or produced with a low weight and/or highly fragile products as the ceramic one I biscotto or the glass, till articles many heavy like the coils of Jumbo paper or floor tiles of ceramic. The Sacchipossono to be used in order to stop the palletized freights or not, loaded on container, in naval holds, on truck or vagoni railway.
How to use the Bags? He is sufficient disporli in the space between cargos and then to swell them, so as to block and to stop the cargo in effective way.
The Sacchipresentano many advantages respect to other systems of clamping of cargos, which as an example the slings in wood, the pallets second hand, polistirolo or the polyurethane. Between the illustrated advantages we can number those to continuation:
1. they are easy to use
2. Thanks to the valve and the special guns of inflation swell and deflate quickly
3. They reduce the job and the time of cargo
4. They are economic
5. They are the more effective way in order to load and to block the goods
6. They optimize the cargo space of the containers
7. They are riutilizzabili
8. They are riciclabili
9. They are easy to remove or to decide in the cargo point
10. They do not demand other types of clamping
Our Bags are available in a range wide of formats with the widths that vary from 60 to 120cm and lengths till 260cm and in the light types, medium and heavy.
|
|
|
Sander pilot pad - the effective transport lock fur light, heavy and heaviest merchandize. They prevent damage with transports of goods in containers or with TRUCK, course and ship dispatch. The employment is versatile and the protective effect remains in all climate zones. The goods protection is simple and goes fast. The empty pilot pads are placed into the gaps and filled with compressed air in less than 1 minute.
|
|
All-purpose medium pressure series MD
Features:
The series MD comprises double shut-off couplings in nominal sizes from 6 to 50 mm. This series is available in different materials with various surface coatings.
Key Benefits:
• unlocking device
• universally applicable
• extremely hard-wearing & durable
• various seal materials
• variety of optional equipment
• broad spectrum of connection types in the standard version
• ring grips optionally available for large nominal sizes
Nominal sizes:
6, 7, 12, 19, 25, 32 and 50 mm
Media:
• water
• compressed air
• diverse fluids
• fuel
• lubricating greases
• hydraulic oils and many more
Pressure Range:
up to 250 bar (depending on nominal size and material), partially suitable for vacuum
|
|
24 KA series
Durable, single hand quick connect coupling made of brass. The sealed sleeve prevents dirt from reaching the internal parts. The construction is based on the 26 series, which has proven its worth many times over the years and can be used for a multitude of applications.
Advantages: Single hand operation and a multitude of connecting options.
Applications: Air tools, automotive, compressed air, mechanical engineering, compressors.
Working Pressure: PB = 35 bar, maximum static working pressure with safety factor of 4 to1.
Working Temperature: -20°C up to 100°C (Buna N), -40°C up to 120/150°C (EPDM), -15°C up to 200°C (Viton®), depending on the medium.
|
|
225 KL series
The 225 KL coupling system was developed for the chemical and beverage industries for filling and draining containers. There is no leakage loss whatsoever during the connecting as well as the disconnecting process. The EPDM seals conform to the FDA regulations.
Advantages
High flow rates, easy to clean, simple to dismantle, moving parts are encapsulated and external to the product flow. The screwed connection allows manual connection even at a pressure of 4 bar.
Applications
Pharmaceutical, food and beverage.
Working Pressure: PB = 16 bar, maximum static working pressure with safety factor of 4 to1.
Working Temperature: -40°C up to 120/150°C (EPDM), -15°C up to 200°C (Viton®), 0°C bis 316°C (Kalrez®) , depending on the medium.
|
|
 see the results for the following category : Gas springs |
|
|
