|
|
Standard Pin Oven Chain:
Our Standard Pin Oven chain begins its life as 3⁄4" pitch ANSI chain but that's where the "standard" part ends. We improve this chain?s ability to perform in the harshest of environments by providing the components with the same superior qualities as our industrial drive chains such as: raw material selection and closely controlled heat treatment. Then we incorporate some additional clearances to accommodate the high temperatures of the drying ovens and allow more access for lubricant to enter the critical pin/bushing joint
|
|
Pin Oven (Deco) Chain from Tsubaki is built to handle extreme temperatures, high tension, and demanding production rates. Wide-waist link plates increase strength, shock resistance, and durability. Extra clearance between chain joints ensures smooth operation, even with heavy buildup on line. A wide range of pin tip styles keep cans uniform and secure.
Count on Pin Oven Chain from Tsubaki to keep you rolling when the heat is on.
|
|
Wichard offers a wide range of bow shackles forged in Grade 316L stainless steel. These shackles are avaible in various diameters from 4mm to 20mm depending on the model.
Thanks to the forging technology, the Wichard shackles offer oustanding breaking loads (up to 8000 Kg) as well as optimized dimensions.
The Wichard bow shackle is also avaible in Titan (TA6V) to generate important weight savings (up to 40%) and also in grade 630 stainless steel (for higher breaking loads)
|
|
Wichard offers a wide range of D shackles forged in Grade 316L stainless steel. These shackles are avaible in various diameters from 4mm to 14mm depending on the model.
Thanks to the forging technology, the Wichard shackles offer oustanding breaking loads (up to 8000 Kg) as well as optimized dimensions.
The Wichard D shackle is also avaible in Titan (TA6V) to generate important weight savings (up to 40%) and also in grade 630 stainless steel (for higher breaking loads)
|
|
|
We manufacture small- and medium-sized series of special items. You can see some of them in the photo, but these are by no means all. Send us a sketch or a diagram, with quantities, material, sizes and possible specifications, and we promise to get back to you.
|
|
| ... products without technical information |
| |
|
|
|
|
Moisture Meter ( TECPEL 590)
Features:
1.CE-Mark approval
2.Portability and simplicity one-hand operation
3.According EN50081-1(97)
4.According EN50082-1(97)
5.Automatic power shut off for maximum battery life.
6.Jack socket for pin extension leads
7.Three lights to indicate moisture content in wood:
Green: "air, dry"conditions
Yellow: Slightly in excess of normal
Red: Excess moisture
8.Measuring principle is electrical resistance
9.Valox housing to withstand accidental drops
10.Attached carrying case
11.Applications:IndoorAOutdoorAFurnitureAEnvironment studies
TECPEL 590
Display: 3 LEDs and 3 1/2digit liquid crystal display (LCD).
Range: 8% ~ 28%(Reading above 28 indicate increasing levels of high moisture are not percent moisture content,)
The accuracy is +/- 2% from 8% to 28%
stated accuracy at 23 deg C +/- 5 deg C, < 75% relative humidity
Low battery indication: The "battery indication"is displayed when the battery voltage drops below the operating level.
Operating environment: 0C to 40C, 15 to 80% R.H..
Storage environment: -20C to 60C, 0 to 80% R.H. with batteryremoved from meter.
Accuracy: Stated accuracy at 23C5C, <75% R.H.
Dimensions: 193mm(H) x 44mm(W) x 40mm(D).
Weight: Approx. 150g including battery (1.5VX4pcs AAA size).
Temperature compensation :from 0 - 40 degree C
|
|
|
|
|
|
Pin Type Moisture Meters for Wood
The Professional is a hand-held instrument designed to take precise measurements of moisture content in wood and provide comparative readings in wood by-products and various other building materials such as roofing, insulation, plaster etc.. The meter comes with "built in" 5/16 inch pins. Optional "plug in" hand held or slide hammer electrodes with various pin length options are available. The Professional is extremely easy to use providing wood moisture content readings up to 40% in 0.1% increments over the entire measurement range. Readings are displayed on the large clear-view digital LCD display.
The Professional offers a practical and accurate way of ensuring that wood is at a correct moisture level for its intended use, proving to be a vital tool for good quality control.
The Compact is a hand-held instrument designed to instantly and accurately measure moisture content in wood and provide qualitative readings in wood by-products and various building materials such as roofing, insulation and plaster etc.. The meter comes with "built in" 5/16 inch pins. Optional "plug in" hand held or slide hammer electrodes with various pin length optionsare available. The Compact measures moisture content which is then indicated on a clearly calibrated analog dial. The Compact provides a full range of readings up to 40% moisture in wood and 0-100 on color coded comparative scale for other building materials. This pocket-size, and versatile instrument offers an accurate, fast and convenient way of moisture measurement at a low cost.
|
|
|
The hand closes naturally around the ergonomic form of the housing so that the pins on the end of the instrument can be pressed into the material to be measured. The thin pins make it easy to measure the moisture content of sawn timber, chipboard and fibreboard materials up to a maximum thickness of 25 mm as well as normal gypsum or mixed plaster.
|
|
| ... products without technical information |
| |
The POROSCOPE HV20(D) is used to detect pores and pinholes in electrically non-conductive protective coatings on metal or concrete using the High Voltage Method according to ISO 2746, ISO 8289 and DIN 28055.
Applications
- Pore testing in containers, oil tanks, agitator vessels, pipes, boilers, etc., lined with enamel or plastic
- on building seals, made of non-conductive coatings
- in the construction industry.
|
|
Light-weight and easy-to-use, the battery powered porosity detector is suitable for inspecting electrically non-conductive coatings on metallic substrates. Working on the wet-sponge testing method, PoroTest 1 uses 9V direct current which is completely risk-free to the operator.
Coating thickness range: 0...300 microns
|
|
Holiday detector for detecting pores and holes in insulating materials on conductive substrates such as steel, aluminium, etc. Typical applications are: Linings and coatings applied on ducts, pipes, hulls, oil and storage tanks, enamel, paint, rubber and bitumen linings, vessels and tanks, GFK and other plastics materials. Tanks or vessels must be filled with water or other conductive material.
Portable and storage battery supplied, PoroTest 7 offers a great variety of electrodes.
Test voltages:
0.5..7 kV for testing materials from 0.03..1.7 mm thickness
6..11.3 kV for testings materials from 1.4 .. 11.3 mm thickness
Now with elctronic control of test voltage depending on material thickness and vice versa!
|
|
| ... products without technical information |
| |
|
|
|
|
The Tyco Electronics P350 is a fully automatic pin insertion machine capable of applying reeled products from Tyco Electronics or other manufacturers. With inline operation, an automatic tool changer and insertion rates up to 5 per second, it is focused at fully automatic high speed operation to maximize throughput while minimizing costly scrap.
Easy Operation
Boards up to 450 x 450 mm [17.5 x 17.5] can be processed and are positioned on the X/Y table by stepper motors.
A servo powered XY table positions the PCB under a central drive station at highspeed. The automatic tool changer can hold up to 3 insertion heads each capable of applying a different product. A unique rotary insertion finger allows the application of products at up to 7 different angles without rotating the PCB. This allows the P350 to apply product at different angles without a reduction in insertion rate or the potential positioning error associated with PCB rotation. An active lower anvil provides support to the PCB during insertion, can provide special actions such as clinching (when applicable) and allows for real-time force monitoring for 100% quality assurance on press-fit applications. Icon driven software with touch screen provides a simple to use, intuitive operator interface.
The P350 provides a wide range of solutions for pin insertion applications. Board size capacity up to 450 x 450 mm [17.5 x 17.5], quick change tooling packs, and a wide range of options make it a flexible high speed platform.
A wide range of optional equipment is available for further performance enhancement and versatility to meet a wide range of customer specific application requirements
|
|
|
|
|
|
The Tyco Electronics P200 is a stand-alone insertion machine targeted at low to medium volume production. Equipped with a rotary insertion finger, the P200 can apply products at up to 7 different angles without having to rotate or remove the board. The end result is the ability to apply products at various angles without increasing cycle time.
Easy Operation
Insertion tools for Tyco Electronics products are composed of an insertion head (upper tooling), an anvil (lower tooling) and a product feeding mechanism. These tools are product specific and the PCB holder interface is designed according to the customer application. A rotary insertion finger allows the insertion of pins at different angles. Because of a simple mechanical and electrical interface, other tools can easily be integrated into the machine.
The standard insertion head on the P200 machine is pneumatically activated. All movements such as feeding the product, cutting contacts off the carrier strip, gripping and inserting the product into the PCB are activated by the vertical movement of the pneumatic cylinder.
Also available is the motor driven base insertion head together with a large variety of product specific conversion kits. These conversion kits can also be used on P300 and P350.
The excellent performance of a multi-tasking control system allows easy programming and operation of the machine. Simple operator and programming interface, failure diagnosis and modem (for remote diagnosis) to provide easy operation and trouble-shooting.
|
|
HSS Handheld System
for automatic feeding and insertion of panel clips
- For pushnuts, panel clips, plugs, caps, etc.
- Fast and simple processing.
- Controlled assembly .
- Uniform processing quality.
|
|
|
|
|
|
The Tyco Electronics P350 is a fully automatic pin insertion machine capable of applying reeled products from Tyco Electronics or other manufacturers. With inline operation, an automatic tool changer and insertion rates up to 5 per second, it is focused at fully automatic high speed operation to maximize throughput while minimizing costly scrap.
Easy Operation
Boards up to 450 x 450 mm [17.5 x 17.5] can be processed and are positioned on the X/Y table by stepper motors.
A servo powered XY table positions the PCB under a central drive station at highspeed. The automatic tool changer can hold up to 3 insertion heads each capable of applying a different product. A unique rotary insertion finger allows the application of products at up to 7 different angles without rotating the PCB. This allows the P350 to apply product at different angles without a reduction in insertion rate or the potential positioning error associated with PCB rotation. An active lower anvil provides support to the PCB during insertion, can provide special actions such as clinching (when applicable) and allows for real-time force monitoring for 100% quality assurance on press-fit applications. Icon driven software with touch screen provides a simple to use, intuitive operator interface.
The P350 provides a wide range of solutions for pin insertion applications. Board size capacity up to 450 x 450 mm [17.5 x 17.5], quick change tooling packs, and a wide range of options make it a flexible high speed platform.
A wide range of optional equipment is available for further performance enhancement and versatility to meet a wide range of customer specific application requirements
|
|
|
|
|
|
The Tyco Electronics P200 is a stand-alone insertion machine targeted at low to medium volume production. Equipped with a rotary insertion finger, the P200 can apply products at up to 7 different angles without having to rotate or remove the board. The end result is the ability to apply products at various angles without increasing cycle time.
Easy Operation
Insertion tools for Tyco Electronics products are composed of an insertion head (upper tooling), an anvil (lower tooling) and a product feeding mechanism. These tools are product specific and the PCB holder interface is designed according to the customer application. A rotary insertion finger allows the insertion of pins at different angles. Because of a simple mechanical and electrical interface, other tools can easily be integrated into the machine.
The standard insertion head on the P200 machine is pneumatically activated. All movements such as feeding the product, cutting contacts off the carrier strip, gripping and inserting the product into the PCB are activated by the vertical movement of the pneumatic cylinder.
Also available is the motor driven base insertion head together with a large variety of product specific conversion kits. These conversion kits can also be used on P300 and P350.
The excellent performance of a multi-tasking control system allows easy programming and operation of the machine. Simple operator and programming interface, failure diagnosis and modem (for remote diagnosis) to provide easy operation and trouble-shooting.
|
|
Normal execution is with circular bore
Keyways - squares - hexagons - on request
The splined shaft is normally supplied drawed
We can supply the splined milled-hardened-grounded.
|
|
| ... products without technical information |
| |
Due to their high grinding energy, the Variable Speed Rotor Mill PULVERISETTE 14 is the best choice for grinding of soft to medium-hard, tough, brittle materials - including plastics and for sample preparation according to RoHS and WEEE (e.g. for detection of hexavalent chromium).
The material is comminuted through impact and friction forces. The final fineness of the samples depends on the selected sieve insert.
To avoid undesired abrasion, the FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 can be equipped with rotors made of stainless steel, titanium or with titanium nitride or tungsten carbide coatings.
|
|
Hangzhou Donghua Chain Group Co., Ltd is the biggest chain manufactory in China. This company is specialized in producing all kinds of standard chains and special chains, e.g. A or B series chains, automobile chains, stainless steel chains, combine harvester chains, heavy-duty cranked link transmission chains, stereo garage chains and maintenance-free chains etc.
If you are interested in our products please feel free to contact me by mail.
zhangxb@dhchain.com
|
|
The SL series is characterized by its robustness and its reliability. The SOCAPEX SL line is mainly used for varied industrial applications: automatism, instrumentation, robotics, power distribution, transport, nuclear industry, lighting, oil & gas, shelters…
straight cable mount plug
right angle cable mount plug
panel mount receptacle
cable mount inline receptacle
panel mount plug
|
|
|
|