|
|
|
|
|
|
Type 11 Slings
FLEMISHED EYE AND MECHANICALLY SWAGED
SLINGS WITH SINGLE-ROPE LEGS AND OPEN AND/OR CLOSED SWAGED SOCKETS
Type 21 Slings
FLEMISHED EYE AND MECHANICALLY SWAGED
Type 21 slings are 2-leg All-Purpose bridles, designed for general lifting purposes where attachment may
be made directly to the load, such as hooking into lifting eyes or placing loops over lugs. Capacites listed have a 5:1 design factor.
Type 31 Slings
FLEMISHED EYE AND MECHANICALLY SWAGED
Type 31 slings are 3-leg All-Purpose bridles, generally recommended for handling unbalanced loads. Capacities listed have a 5:1 design factor.
Type 41 Slings
FLEMISHED EYE & MECHANICALLY SWAGED
Type 41 slings are 4-leg All-Purpose bridles, used both for balanced and unbalanced loads and for heavier loads where design calls for more distribution of weight by the use of attachment at four points. Capacities listed have a 5:1 design factor.
Type 12 Slings
CABLE-LAID: GALVANIZED
Southwest Wire Rope Cable-Laid slings are specialized slings, designed specifically for applications that require extreme flexibility and resistance to kinking. Type 12 is a single-leg construction for use singularly or in pairs. Where cutting abrasion or extreme conditions are factors, however, the All-Purpose Type 11 sling is recommended.
Braided Slings
Type 19
Cross Section
Through Body
Helically laid with one continuous wire rope running through both eyes and the body
|
|
• Telescope action jacks; for corner routes
• Suitable for laying lines of cable
• For pit cable inlets or outlets.
• For laying cables over ducts corresponding to corner passages.
• For the horizontal positioning.
|
|
|
|
|
|
JETnet® is based on a flexible network architecture with OFC-cables and is applied for long distances as well as for local applications. This solution offers especially for the "last mile" largest possible flexibility for extending transfer capacities with customers and for optimised investments.
That system is developed as a unit construction system using many known components and is completed with construction elements and technologies adjusted to special application purposes. It is based on an individually applicable tubing system embedded in standard HDPE protection tubes. With the tubing system OFC cables adjusted to customer requirements can be blown in without splicing. Extension on customer request can be realised quickly, without engineering operations and at low cost.
In many countries worl-wide the JETnet® priciple has proven its functionality and cost advantages. Projects have been realised in Germany, too. Its module construction principle with simple technologies realizes quick reaction on new projects and changed customer requirements. A complete product range of construction elements of cables and tools is available, being excellently qualified for rough field application. As it is compatible with already existing protection tube systems it extends the universal application possibilities and offers the solution necessary for a future orientated connection network.
Besides offering and supply of JETnet® components Draka Comteq offers additional support for planning of microcable routes of FTTH-networks.
|
|
Characteristics of the product
Heights: 8 to 40 mm (according to product) Widths: 20 to 56 mm (according to product)
Rails C asymmetrical and omega 35 mm for modular fixing of equipment.
These rails deliverable are perforated or not
Surface treatment: Rough untreated, électrozingué dichromate yellow or blue, hot galvanized Sendzimir 275 or hot galvanized with soaked.
Perforations special and put at length on request.
A range supplements clamps of fixing of cables or tubes with a diameter 6 mm to 110 mm out of steel galvanized hot with soaked, aluminum and stainless steel AISI 304 H adapted to the shaped rails and other
|
|
Model: 24MP
Diameters: 3 to 23 mm
Max lenght: 9999.9 m
Cable guidance: 360º
Reset: Push button
Weight: 536 g
Measuring of cables, pipes, rods ... etc.
Manual handle grip.
Clamp subjection.
Ropes measuring, model: 24MPK
|
|
| ... products without technical information |
| |
SANDOW AVIA technical elastic shock cords, also called bungee cords, are designed to meet aviation standards., particularly French aerospace ASNA standards.
Force /extension properties are guaranteed for a given diameter and a given elongation. (maximum 100%)
Shock cords from 4 to 30 mm in diameter will resist tractive forces of 1 to 400 daN respectively.
|
|
hand rope winch 'TANGO' with many advantages:
— corrosion resistant
— quiet running
— large rope capacity
— independent winding of rope possible
— compact form
— fully enclosed
— self-locking
— folding crank handle
— low weight
— proven security concept
— zinc plated or in stainless steel
— suitable for wall or base mounting
|
|
MPW open winch:
Our MPW multi-purpose winch units are built of large series sub-assemblies using modular system components manufactured to the most demanding quality requirements. The variable combination of these components makes it possible to implement the most efficient technical configuration for your application.
|
|
e.lift® 500-800-1000
"Personnel lifting hoists for suspended
platforms and temporary cradles".
The e.lift® hoist is available in 500 Kg, 800 kg and 1000kg versions. This hoist is used for personnel lifting combined with a suspended scaffolding, a cradle or an individual seat. Available in EN 1808 version and in version outside UE.
|
|
Wormgear winches VL250-1500kg
Wormgear winches WW2000-5000kg
Spurgear winches TL125-2000kg
GEBUWINch winches - accessories
GEBUWINch Special winches
|
|
Thaler Cable Capstan winches are highquality products and represent the latest modern technical standard in the field of cable pulling winches.
Thaler Winches are built in accordance to the prescriptions of the cable industry, German Telekom and energy supply companies.
They are constructed under strict compliance with the machine guidelines of the European Community and with their chassis approved by TÜV (Technical Surveyance Authorities) they are admitted to the public traffic.
Short description:
- Double capstan system, both capstan heads are driven
- No chains between hydraulic engine and capstan system
- Hydrostatic drive
- Petrol or diesel engine
- Drum capacity for big rope lengths
- Automatic rope guidance to the drum
- Pulling force control by electronic measuring system with print out - SYSTEM KPR 2000 with PC interface
- Tandem axle chassis with overrunning brake, height adjustable drawbar with spindle support
- Metal hood
|
|
|
|
|
|
X820P
Use the tirak® to drive suspended access platforms, powered working seats and work cages as well as silo inspection equipment and many more.
Travel to the work place with the tirak® at speeds up to 18 m/min which is a significant benefit the higher up you have to go.
No matter what height, the tirak® hoist will take you there safely and speedily.
For man riding application an independent secondary safety rope is required. A Blocstop® fall arrest device is connected to the safety rope and working platform and locks onto the safety rope in the unlikely event of failure of the hoisting rope.
The principle:
The tirak® operates on the principle of wire rope travel by clamping, using adhesive pulleys. The originality of the system is in the operation and arrangement of the pulleys. The units of the X and L-series have only a single driver disc. The grip of the wire rope on the pulleys is obtained by a set of rollers, operated by a pressure spring. There are two rollers used for the X-series and only one roller for the lightweight L-version.
|
|
|
|
|
|
Electric wire rope winch model RPE
Pulling force 250 - 1000 daN
The robust and extremely compact, practical cube design and universal rope lead-offs allow individual applications in almost any position.
Features
- Standard operating voltage 400 V, 50 Hz, 3-phase. 40% ED.
- Motors protected to IP 54.
Optional
- Different drum designs, e.g. extended to accommodate longer rope, machined grooves for exact reeling, with separation web and 2nd rope outlet for working with two ropes.
- Geared limit switches to limit rope motion in both directions.
- Single-phase A.C. motor 230 V, 50 Hz.
- Control by means of pendant control including control switch with emergency stop and 2 m long control cable.
- Contactor control with 42 V control voltage.
- Slack rope switch to automatically stop the winch when rope tension eases e.g. when the load touches down (only in combination with low voltage control).
- Frequency converter for stepless speed control.
- Adjustable slip clutch to protect the winch from overloading for models RPE 2-13, RPE 5-6 and RPE 5-12.
- Special design according to BGV C1 for theater stage applications available.
|
|
| ... products without technical information |
| |
... see all the products in the category
Winches
|
|
|