|
|
HLT3500 is a high-power, Class IV CO2 laser with a rated output power of 3500W and a maximum of 4kW. The laser radiation has a wavelength of 10.6mm and as such is invisible to the human eye. To facilitate alignment with external mirrors, a visible Class IIIA green laser diode pointer is standard and pre-aligned with the main beam. The visible beam is only present with closed shutter, and hence no accidents can occur since the main beam is always blocked when the pilot beam is visible.
|
|
|
The HLT8000 is in a design phase and will be optimised for maximum power. It has a single-layer, larger-bore resonator. It will be suited for high-speed, deep-penetration (keyhole) welding, cladding and laser surface treatment.
|
|
|
The HLT6000 is currently running reliability tests. It has a rated output power of 6kW and a maximum of 7200W. Due to its long, slim resonator it produces a low-order, high quality beam suitable for sheet and plate cutting. Attached to a high-dynamics machine, it can be used to exploit the advantages of increased processing speed in sheet metal. Alternatively, it can be interfaced to a large-area plate cutting machine.
|
|
The HLT4500 is an industrial high power CO2 laser with an output power of 4500W and has integrated the best mode for sheet and plate cutting. Gas consumption is low as 20Nl/h and has a footprint of only 1600x1600x1600mm³. The laser is controlled by a Siemens controller equipped with standard teleservice via internet, is designed for ease of maintenance, the laser is standard delivered with integrated beam shaping optics for matching to the resonator and the application. This laser is the ideal source to be integrated on an excisting or a new laser machine or as stand alone unit for all kind of laser applications.
On top this laser equiped with highest standards for optical and electrical standards is economically low priced and has a world-wide after sales service back-up.
|
|
|
|
|
|
Compact Series
Power and solutions at the service of the steel plate market
- Innovative laser resonator design with DCSS DOUBLE CINEMATIC SUPPORT SYSTEM
- Power up to 6000 W
- Modular power supplies
- Low operative costs
- Long maintenance intervals
- Flexibility of integration
- Single oil - free radial compressor
The new generation of laser resonators of the Compact series with powers up to 6 kW encloses the decades of experience of El.En. in the field of high power CO2 laser sources. The large range of powers available allows cutting and welding of high thickness metals, with high quality, high performances, high productivity and low operative costs.
Stability: innovative DCSS
DOUBLE CINEMATIC SUPPORT SYSTEM (PATENT PENDING)
The great thermo-mechanical stability of the El.En. laser resonator allows use in the most extreme industrial conditions. The innovative double cinematic support system guarantees total disjunction between the laser performances and the mechanical and thermo-mechanical movements of the chassis.
This patented solution gives to the resonator an exceptional stability and repeatability in long and short term.
Oil free radial compressors
The laser sources of the Compact series are equipped with oil free radial compressors that guarantee long maintenance intervals.
|
|
|
ROFINs well proven high-power CO2 lasers are always a good choice: whether cutting paper or welding gear wheels; the high availability, low service requirements, and excellent beam quality make ROFIN lasers an essential tool in any production environment.
|
|
| ... products without technical information |
| |
|
|
|
|
Technical specifications:
Maximum static pressure: 1,8 kPa
Maximum airflow: 2,4 m3/min
Power: 150 W
Control panel: filter saturation, overheating and overloading indicators, 7 speed levels of suction.
Synchronization plug for connection with other applications.
Dimensions (mm): 264 (L) x 264 (W) x 502 (H)
Very comfortable to integrate regarding its compact size, the CKU-060AT-ACC-CE is easily placed in the most narrow places in your production zones.
It offers an excellent performance/cost ratio: static pressure reaches 1.8 kPa and airflow 2.4 m3/min for a power consumption of only 150W.
A panel board will allow you an easy handling thanks to indicators of filters saturation, of overloading, of overheating and a precise user-adjustable speed with 7 levels. Furthermore, a synchronization plug eases every connection to your productive systems.
The filtration system begins with a first filter with a special structure which captures more particulates, lengthen the time of use and is easy to change. A second filter with activate carbon removes odors and fumes generated by lasers or welding. Filtration rate reaches 98% for particulates ≥ 0.3µ.
Thus the CKU-060AT-ACC manages fumes and odors for the health and comfort of salaries, guarantee a protection of the laser equipments and ensures a better quality of production.
Non-applicable for toxic gas, liquid, explosive, corrosive and abrasive substances.
|
|
Extraction and filter unit with fan, automatic filter cleaning depending on loading of dust on filters, Siemens-Simatic-unit control and PTFE membrane filters.
KEMPER extraction systems are suitable for connection to flame cutting tables with laser, plasma or autogen cutting systems. These extraction systems are also suitable for extraction of welding smoke at several work stations by means of stationary units.
Filter classification M and L with filter efficiency of 99,9 % (BIA-classification U, S, G, C).
|
|
|
|
|
|
Laserex™ extraction systems for Laser Generated Fumes
Purex Laserex™ extractors are specifically designed to integrate with laser production processes that produce hazardous laser fumes. Purex International engineers are available to advise on the correct combination of pre-filter, main filter and machine required for any specific process, including: -
-Laser marking
-Laser drilling & cutting
-Laser engraving
-and laser welding
Industries supplied
Purex laser fume extractors are compatible with common C02, Yag and Diode lasers. A wide range of materials are used in the processes above. They include paper, foil, glass, plastics, metals, wood, enamel and ceramics. Purex supply many of the following industries: -
-Beverage, brewery and packaging
-Medical and pharmaceutical
-Cosmetic
-Food processing
-Aerospace manufacturing
-Semiconductor
-Electronics and automotive
-Machine tool manufacturing
-Defence and nuclear
-General engineering
-System features
The Laserex laser fume extractors can be connected to existing machinery using custom or standard extraction manifolds. The fume extractor can be linked to a line control circuit so that it starts and stops with the main machinery.
Failsafe controls can also be set to stop the line if extraction flow rate falls below a pre-set minimum or hazardous gases get through the system.
Unlike "vent to atmosphere" systems, the Purex system can be relocated with a production line quickly and efficiently with no pipework contamination issues.
|
|
During a wide range of laser processes and applications hazardous particles and gases are generated. According to regulations of air purification at the workplace they have to be removed from the air.
Extraction devices of the LAS series are particularly designed for these tasks and guarantee the protection of employees as well as the product quality and protection of laser lenses and mirrors.
|
|
|
Filter systems especially made for the laser industry. Suction systems for laser jobs with i.e.metal, wood, plexiglas and gum (cutting, welding, marking etc.)
|
|
The Geovent GFB filter is the complete filter solution, when the extracted air has to be cleaned. The GFB filter has a fully automated, pneumatic filter cleaning system, which cleans the polluted air with up to 99.97%.
The filter can find use in many situations, but will primarily be used within industries, where polluted air from processes such as welding, plasma / laser cutting, grinding, powder enamelling, etc. needs to be filtrated.
The filter is suitable for airflows of up to 7,200 m³/h depending on the particle load. If the need for a lager capacity should arise, several filters can be connected in parallel.
As standard, the filter is delivered in fully galvanized execution with an automated, pneumatic cleaning system, collection bucket, filter control - and furthermore, it is now affordable to do something about the environment...
|
|
Single-level FMS w/ RGV
One of the most popular arrangements with almost unlimited capacity. The in-line configuration allows any number of future machines, pallets and stations to be incorporated.
|
|
- 1st and 2nd operations on same lathe W22-T4;
- complete drilling on vertical drilling center DWN-22V.
The cycle can be carried-out only when the lathe Is equipped with pallet loading system. Production capability is influenced by the lathe's ability to machine 1st and 2nd turning operations in sequence of one another on a continuous basis.
As indicated in the machining cycle below, the theoretical production capability for the machining of a 15"x7" wheel is about 33 pcs./hour.
|
|
| ... products without technical information |
| |
Single-level FMS w/ RGV
One of the most popular arrangements with almost unlimited capacity. The in-line configuration allows any number of future machines, pallets and stations to be incorporated.
|
|
- 1st and 2nd operations on same lathe W22-T4;
- complete drilling on vertical drilling center DWN-22V.
The cycle can be carried-out only when the lathe Is equipped with pallet loading system. Production capability is influenced by the lathe's ability to machine 1st and 2nd turning operations in sequence of one another on a continuous basis.
As indicated in the machining cycle below, the theoretical production capability for the machining of a 15"x7" wheel is about 33 pcs./hour.
|
|
| ... products without technical information |
| |
APPLICATION Suitable for OPP/Cellophane adhesive tape with auto tabbing.
FEATURES Centralized control panel: All operation controls. For this machine are centralized in a control panel.
Three-step length setting: This length setting provides extremely smooth rewinding operation to gives accurate rewinding length.
Using 4-axis automatic exchange coiling, continuous rolling and enhance efficiency.
Pneumatic brake: Brings the machine to an immediate halt for accurate positioning and labeling.
Automatic labeling device: This operation will be installed in the tail end automatic paper affixed to the machine's largest production capacity.
MAIN TECHNICAL PARAMETERS:
Working Width 1350mm 1000mm
Max. Diameter of rewinding 120mm 120mm
ID. of paper core 76.2mm 25.4-76.2mm
Unwind Diameter 600mm (Max.)
Min. Slitting Width 12mm
Machine Speed 18M/min
|
|
|
|
|
|
1. Application: Suitable for PP, PET, and BOPP film and Paper … etc.
2. Main Technical Parameters:
2.1 Max. Working Width 1300MM or 1600MM
2.2 Max. Unwind Diameter 1000mm
2.3 Max. Rewind Diameter 650mm
2.4 Rewind Core Diameter 3’’
2.5 Max. Machanical Speed 250m/min
2.6 Min. Slitter width 25 mm
2.7 Power Upon customer request
3. Main Device:
3.1 Main drive 5HP AC Motor (Made in Taiwan) 1 set
3.2 Rewind drive 5HP AC Motor (Made in Taiwan) 2 set
3.3 Rewind shaft 3’’ Differential shaft 2 pcs
3.4 Control system Touch screen control 7.7’’, can be setting 20 pcs tension program 1 set
3.5 Length Counter 2 stage length counter 1 set
3.6 Arc roll 100mm(Ô)*1350mm/1650mm(L) 1 set
3.7 Main transmission Silicon roll 1 set
3.8 Scrap Dispose Exhaust Fan 1 set
3.9 Slitter unit Blade frame unit ( 10 pcs blade frame, 100 pcs razor blade)
Female blade Ô105*19T,
Male Ô92*20T
10 sets
Each 14pcs
3.10 Female blade system Female axes 1 pcs
3.11 Male system Male Ô92*5T
Male shaft rotate tray(air pressure unit 180° transition)
Male axes 14 set
1 set
2 pcs
4. Unwind Device:
4.1 20kg brake unit including auto tension control system 1 set
4.2 Unwind system Hydraulic Lifter 1 set
air pressure control by manual
4.3 Alum. knife coveÔ92
(5t/6t/7t/8t/9t/10t/20t/30t/50t) Each 10 set
4.4 EPC (Auto edge position control) unit 1 set
5. Other Device:
5.1 Operation manual, tool box Each 1set
|
|
DCM has developed for many years a complete range of slitter rewinders for the flexible packaging industries and paper converters.
Slitter rewinders with two rewinding shafts are produced in batches to allow short delivery time. Auxiliary reel handling equipments are also offered. The drive of the machines is operated through a touch screen. All models can be delivered with shaftless unwinder. DCM offer all types of slitter rewinders using centre drive, surface drive and centre/surface drive to suit all the applications of film, foil, laminate, paper, board, thermal paper, cigarette paper etc…
SUPER LYNX - PANTHERE
Slitter rewinder with 2 rewinding shafts Suitable for film, foil and laminate. Integral a.c.drive through 3 motors. High performance web tension control. Shaftless unwind, unloading trolley. Easy operation for top quality slitting.
- Production speed 600 m/min
|
|
Rescue Equipment
Tests on modern vehicle construction have shown that the new STREAMLINETechnology cutters are not only capable of cutting the hardest materials found today without any difficulty, they also possess enough power to potentially handle new challenges in the future!
The advanced design of these cutters offer impressive operating speeds and large cutter opening’s to provide maximum efficiency on any rescue scene.
Through extreme material strength STREAMLINETechnology cutters provide maximum durability and prevention of blades breakings.
When uncompromising quality and power are demanded, STREAMLINETechnology cutters are the reliable choice for use in any rescue operation.
- cutting force up to 310 kN
- opening of the blades up to 275 mm
|
|
| ... products without technical information |
| |
Cutting Ring Fittings acc EN ISO 84 34-1, for example
- made of stainless steel AISI 316ti
- LL, L and S series
- from 4 to 42 mm
- nominal pressure up to 630 bar
- with double sided pipe connection
- with Viton seal or metal sealing
- and other variations according to customer requirements
|
|
|
|
|
|
Eaton™ Walterscheid™ WALRing Sets New Standard For Reliable Assembly Of Cutting-Ring Systems
BADEN-BADEN, Germany ... Diversified industrial manufacturer Eaton Corporation announced the launch of the Eaton™ Walterscheid™ WALRing, the new two-edge cutting-ring system with the time-tested WALFORMplus captive seals for simple and reliable assembly.
WALRing systems withstand operating pressures up to 800 bar (11,600 psi) with a 4:1 burst rating. It is offered in sizes ranging from six mm up to 42 mm and built to ISO 8434-1/DIN 2353 standards.
The WALRing assembly is composed of a DIN nut (which has an integrated two-edge cutting ring and additional support ring), the fitting body and the WALFORMplus captive seal. Like all cutting-ring systems, WALRing can be assembled with a standard wrench or by machine (controlled final assembly), which is a big advantage. Anotheradvantage of the WALRing system is that the possibility over-tightening is virtually eliminated. After one to one-and-a-half turns, the assembler will feel a noticeable increase in torque that clearly indicates the end of assembly. "These advantages distinguish WALRing from other competitive products," explained Jörg Altenrath, senior development engineer, Eaton Corporation. "Two cutting edges have been the tried and tested standard for decades because they absorb force uniformly, do not cut deeply into tube and reliably protect the WALRing against stripping-even in thin-walled tubes."
|
|
|
We provide a large range of cutting-ring technology, including single-edged cutting rings as well as proven double-edged rings and even modern, soft-sealed cutting rings.
|
|
|
|
see the results for the following category : 
