|
|
HLT3500 is a high-power, Class IV CO2 laser with a rated output power of 3500W and a maximum of 4kW. The laser radiation has a wavelength of 10.6mm and as such is invisible to the human eye. To facilitate alignment with external mirrors, a visible Class IIIA green laser diode pointer is standard and pre-aligned with the main beam. The visible beam is only present with closed shutter, and hence no accidents can occur since the main beam is always blocked when the pilot beam is visible.
|
|
|
The HLT8000 is in a design phase and will be optimised for maximum power. It has a single-layer, larger-bore resonator. It will be suited for high-speed, deep-penetration (keyhole) welding, cladding and laser surface treatment.
|
|
|
The HLT6000 is currently running reliability tests. It has a rated output power of 6kW and a maximum of 7200W. Due to its long, slim resonator it produces a low-order, high quality beam suitable for sheet and plate cutting. Attached to a high-dynamics machine, it can be used to exploit the advantages of increased processing speed in sheet metal. Alternatively, it can be interfaced to a large-area plate cutting machine.
|
|
The HLT4500 is an industrial high power CO2 laser with an output power of 4500W and has integrated the best mode for sheet and plate cutting. Gas consumption is low as 20Nl/h and has a footprint of only 1600x1600x1600mm³. The laser is controlled by a Siemens controller equipped with standard teleservice via internet, is designed for ease of maintenance, the laser is standard delivered with integrated beam shaping optics for matching to the resonator and the application. This laser is the ideal source to be integrated on an excisting or a new laser machine or as stand alone unit for all kind of laser applications.
On top this laser equiped with highest standards for optical and electrical standards is economically low priced and has a world-wide after sales service back-up.
|
|
|
|
|
|
Compact Series
Power and solutions at the service of the steel plate market
- Innovative laser resonator design with DCSS DOUBLE CINEMATIC SUPPORT SYSTEM
- Power up to 6000 W
- Modular power supplies
- Low operative costs
- Long maintenance intervals
- Flexibility of integration
- Single oil - free radial compressor
The new generation of laser resonators of the Compact series with powers up to 6 kW encloses the decades of experience of El.En. in the field of high power CO2 laser sources. The large range of powers available allows cutting and welding of high thickness metals, with high quality, high performances, high productivity and low operative costs.
Stability: innovative DCSS
DOUBLE CINEMATIC SUPPORT SYSTEM (PATENT PENDING)
The great thermo-mechanical stability of the El.En. laser resonator allows use in the most extreme industrial conditions. The innovative double cinematic support system guarantees total disjunction between the laser performances and the mechanical and thermo-mechanical movements of the chassis.
This patented solution gives to the resonator an exceptional stability and repeatability in long and short term.
Oil free radial compressors
The laser sources of the Compact series are equipped with oil free radial compressors that guarantee long maintenance intervals.
|
|
|
ROFINs well proven high-power CO2 lasers are always a good choice: whether cutting paper or welding gear wheels; the high availability, low service requirements, and excellent beam quality make ROFIN lasers an essential tool in any production environment.
|
|
|
|
|
|
Marking, Welding, Cutting
- Wide range of materials: Glass, wood, carton, plastics …
- Tremendous lifetime with an MTBF of 20.000 hrs
- Air cooled
- High speed
- High accuracy
- No consumables
- No tool wear
Laser systems from Lasea are especially designed for a quick and easy integration into customer specific environments.
Benefit from our many years of experience in customized laser solutions for the industry. We deliver fast, flexible, and reliable systems for your application.
The laser sources integrated in the CL systems are maintenance-free modulated CO2 lasers. They deliver a high power 10.600nm laser beam focused to a spot size of a few hundreds of microns. Their near diffraction-limited beam can mark, engrave, weld or cut a wide range of materials.
While industrial lasers have seen revolutionary improvements in their conception and performances in the last few years, the technology related to beam deflection has remained the same since more than 20 years. Lasea’s scanners use a new technology with very low power consumption, heat generation, and weight, therefore reducing stabilization times and thermal drifts, and offering much higher acceleration ramps and speeds.
The CL system is managed by Lasea’s control software KYLA.
|
|
| ... products without technical information |
| |
CMS Series
This bundling system is a continuous motion shrink wrapper designed for higher speed applications. Perfect for products longer than 4". The seal bar module moves with the conveyor so that products continuously move through the system.
|
|
MIMI UNIBLOCK P50
AUTOMATIC SHRINK WRAPPER WITH COLLATION UNIT AND STACKER FOR SOFT BAGS
This automatic shrink sleeve wrapping machine with collating unit and shrink tunnel is equipped with a stacker, which allows the collation of the product. It is capable of applying shrinkable film to stacked flexible bags containing coffee, rice, pasta, flour, feedstuff etc.
- Suitable for sleeve sealed and auto sealed film package
- Output: up to 40 flexible bags/min according to the product dimensions.
|
|
MIMI UNIBLOCK 700 NO
FULLY AUTOMATIC SHRINK SLEEVE WRAPPING MACHINE with powered side in-feed belt and pusher
This automatic shrink sleeve wrapping machine is equipped with a shrink tunnel and a powered side in-feed belt and has a pneumatic pusher capable of wrapping single products like sleeves, boxes, etc.
- Versions equipped with 700 mm – 900 mm – 1300 mm – 1600 mm sealing bars
- Suitable for sleeve sealed package and auto sealed film package.
- Output: up to 15 packages/min according to the product dimensions and film thickness.
|
|
The new series of monoblock semi-automatic and automatic shrinkwrappers with sealing bar ßetaPack are extremely versatile: they can pack various products, such as glass and PET bottles, cans, boxes, trays, jars, cartons of different sizes in a wide range of pack collations. They can be used in several industry segments, such as beverages, food, chemicals, wine and spirits, cosmetics, detergents, wood, textile, graphic etc.
The ßetaPack series allows SMIPACK to meet a wide variety of customers demands and to ensure a very good quality/price ratio.
|
|
The wrapping/binding machines mod. AT01, are used to wrap (bind) palletized products with heat shrinking film. The machine wraps, welds and cuts the heat shrinking film, thus covering the packs as they pass through it, without the need of an operator.
The machine may also be added onto existing conveyor lines. The AT01 model automatically changes the coils to continuously wrap packs with different heights thus reducing film waste. It consists of 3 mobile winding groups with selection according to the packs' height.
An upper piegafalde, which serves to arrange the film so as to obtain an optimal heat shrinking even on the upper side, is available upon request.
|
|
Easy-open pack
Coupled to the sealing bar, this system perforates the film along each side of the pack seal in order to create a tear-off strip, without reducing the speed.
90° film reel holder
This device enables quick and ergonomic changeovers by the operator.
Sealing bar
* The traveling sealing bar enables the continuous flow of products.
* The automatic top film feeding system guarantees product stability when the sealing bar descends.
* No transfer zones: single product conveyor from machine infeed to outfeed
|
|
Faults in welding tongs or incorrect process parameters in welding can result in production line waste or defective parts. Checking the electrode force periodically permits spark malfunctions to be detected at an early stage so that repairs can be carried out in good time.
The new Type 9833A test sensor allows precise and reliable measurements to be carried out with minimal electrode gaps. The built-in charge amplifier simplifies the task of mounting and helps to ensure the reliability required by the automobile industry.
|
|
The quality of spot welding depends on the force applied by the electrodes as well as on the intensity of the welding current. Within such a control program, the measurement of the force applied by the electrodes is extremely important for ensuring constant production.
That is why we have developed this equipment to measure the closing force of the grips that may be used during the final stage or during periodic maintenance. The end-pieces are interchangeable and can be used to measure force with various shapes of electrodes, the minimum closing dimension being 0.12 in.
This new instrument leverages the robustness, quality and precision of the Centor instrument family, which are specially designed for mobile use in a production workshop.
|
|
|
|
|
|
Testweld™ KR1000 Robot Welder Force Monitor (For measuring electrode force on resistance welding guns)
ADVANTAGES:
• Robot checking of Electrode Force
• No need to stop robot cells for force checking
• Very fast payback
• Alerts operators to immediate faults & variations
• Can eliminate scrap due to weld deterioration
• Reduces equipment damage and wear
• Keeps force within preset limits
• Gives early warning of equipment deterioration
• Continuous robot operation via go/no go signals
DESCRIPTION - KR1000:
Stand alone analogue output force sensor. Supplied for direct plug and play replacement to commonly existing units.
The target pads remain spatially the same. Robot reprogramming for test position is not required.
The monitor is preset to Zero on no load but can be simply adjusted by the user if required.
The innovative design of the KR1000 force head makes it far less susceptible to errors induced by electrodes not being perpendicular to the target pads.
Exacting construction standards guarantee this instrument is of greater accuracy than other monitors of this kind.
Multiple testing during construction further assist in achieving the superiority that we have set out to achieve.
When coupled to its onboard electronics package the sensor is preset for zero load & calibrated
to a known (NPL) standard.
The KR1000 is robust, durable, reliable, and accurate. KR1000’s have been installed on Car Manufacturing lines since 2005 and have been in constant use without failures.
|
|
The quality of spot welding depends on the force applied by the electrodes as well as on the intensity of the welding current. Within such a control program, the measurement of the force applied by the electrodes is extremely important for ensuring constant production.
That is why we have developed this equipment to measure the closing force of the grips that may be used during the final stage or during periodic maintenance. The end-pieces are interchangeable and can be used to measure force with various shapes of electrodes, the minimum closing dimension being 0.12 in.
This new instrument leverages the robustness, quality and precision of the Centor instrument family, which are specially designed for mobile use in a production workshop.
|
|
|
|
|
|
Testweld™ Hand Held Electronic Force Gauge
An ergonomically designed hand held force gauge.
ADVANTAGES
User comfort "'Ergonomically" designed - for ease of use
One piece unit
Very high accuracy
Swivel head allows access to difficult to reach positions
As with all welding procedures, it is important to eliminate as many variables as possible in order to achieve optimum welding consistently over long periods.
Electrode force is one of the critical parameters in obtaining repeatable, reliable resistance spot welds.
Force can vary because of variable factory air pressure, water in the air lines causing air cylinders to deteriorate and loss of air pressure due to worn seals.
This self contained instrument uses a cell with a force sensor to provide accurate digital read out for auditing weld electrode forces.
Accuracy of this instrument is better than 0.2% and can be switched to read 0-2000 kg, 0-20.00 kN or 0-4400lbs.
In cases of difficult access the head of the swivel head gauge can be swiveled at least ±72º up or down and rotates at least ±90º. Once the desired position is reached it can be fixed by a simple hand tightened knob. A 90 mm long handle is provided for optional use with 2 mountain positions either in-line or at 90º.
A support wrist strap is attached to the gauge so that in the event that it is forced out of the operators hand by misaligned electrodes, it need not fall to the floor and be damaged.
|
|
RECORD
Economical machine especially suited for strapping voluminous packs and pallets. The strapping head is placed on the side of the machine frame.
The sealing head guarantees high seal efficiency for PP or PET strap.
Admitted strap size : 9 - 12 or 16 mm width.
OPTION :
- Automatic sword permitting passage of the straps through the pallet beams.
- Sealing head movable
- Automatic roller conveyor.
|
|
Sealers
Signode manual sealers provide positive sealing action with minimal effort. Light and durable, they lock Strapping ends into a high strength joint.
Notchtype sealers cut into the seal and outer edges of the strapping, turning tabs down (down notch) or up (reverse notch).
Crimp-type sealers press the edges of the strapping and seal into wavy crimps specially shaped to produce maximum frictional forces on the strapping.
|
|
JN-85YMA
Features:
- The machine utilizes a fixed rail for sealing head travel (200-300mm), ensuring close proximity of the sealing head to large packages, and a tight strapping effect. It is equipped with pneumatic cylinder to drive hydraulic movement system.
- This machine is designed for large packages that can align to the sealing head (area).
- Installation with conveyor and photocell is essential.
- This machine requires compressed air source to drive an oil cylinder and makes machine move stable.
- Equipped with warning alarm and buzzer to notice failures of feeding strap.
- P.E.T strapping system is available as an option.
|
|
| ... products without technical information |
| |
Cutting & Welding
3 Table Set-up:
10' Main Vacuum Table
8' (2.44m) Usable Welding Length
10' Filler Table
6x8' Cutting Table
|
|
|
|
|
|
Acetylene Tag-A-Long™ Kit
Portable, Lightweight Oxy-Acetylene Cutting and Welding Outfit
This completely portable lightweight oxy-acetylene cutting and welding outfit weighs less than 32 lbs. and is ready to go where you need it. Compact design stores easily for road travel or when not in use. Ideal for general maintenance, farming, shop, and home use. All brass Oxygen and Acetylene regulators provide efficient and dependable control of gasses. Ergonomically balanced high density polyethylene carrier is extremely durable and includes hose wrap and covered accessories storage compartment. *Cuts up 6" (153mm) and welds up to 1/2" (13mm) with optional tips.
Medium Duty Outfit
Versatile yet economical,
this "HOBART" outfit includes many features found in more expensive outfits. The HOBART TOUGHCUT™ is perfect for a multitude of applications such as farm, ranch, hobby, automotive, refrigeration, light fabrication and repair. This outfit is designed for use with acetylene fuel gas but can operate on propane by simply changing to propane tips. *Cuts up to 6" (153mm) and welds up to 1/2" (13mm) with optional tips.
|
|
| ... products without technical information |
| |
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
Low Power Linear DC Welder with Built-in Monitor - UB25
Features:
- Superior Low Energy Control for Micro Welding
- Ultra Fast Closed Loop Control
- Single Phase Power Supply
- Three Feedback Modes for DC Welders
- Graphical Display and Intuitive DC Welder Monitorin
The UB25 linear DC welders (successor to the Unibond II) provide unsurpassed levels of control for micro-miniature resistance welding. These DC welder power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
