Chemical process pump

Flow: 0.3 l/min - 0.51 l/min

The 114 Series OEM pumps combine ease of use with chemical resistance and reliability. They have great new features and a versatile structure to satisfy different customer requirements. These pumps ...

Flow: 56, 51 m³/h
Pressure: 0 bar
Head: 14, 15 m

The Series B6 is an immersion centrifugal pump that is ideally used for in feeding and recirculating chemicals and solutions in the chemical industry, surface treatment and in the decontamination ...

Flow: 0 l/min - 20 l/min
Pressure: 0 bar - 8.6 bar

1/4" Compact Series pumps are now available in a multiport configuration. The multi-port versions add four additional center ports, two for each manifold which are internally (1/4” NPTF / BSPT Hybrid) ...

Flow: 0 l/min - 54.5 l/min
Pressure: 0 bar - 6.9 bar

1/2” non-metallic diaphragm pump Flow max.: 54.5 l/min Pressure max.: 6,9 bar Fluid control options for pump with electronic interface (PE05 model): • Solenoid-actuated valve for time-based solenoid ...

Flow: 20 l/h - 17,000 l/h
Pressure: 15, 120 bar

This lineup of gear pumps by CHEM are designed for the transfers and metering of moderate viscosity materials such as monomers, pre polymers and other chemicals. Years of experience in the construction ...

Flow: 2 m³/h - 1,160 m³/h
Pressure: 25 bar
Head: 2 m - 162 m

... of products which are novel in their design with the new MegaCPK. Suitable for numerous applications, the standardised chemical pump combines exceptional operating reliability, maximum versatility and ...

Flow: 0.6 m³/h - 1,600 m³/h
Pressure: 10 bar
Head: 2.2 m - 100 m

The upright centrifugal pump has a base plate and designed for the pits and tanks. It has both closed, or semi-open impeller. The discharge pipe of INVCP is supplied to the exterior of the base plate. It is designed ...

Flow: 0 m³/h - 4,800 m³/h
Pressure: 110 bar
Head: 0 m - 285 m

... single-stage centrifugal pump that are horizontally, radially spilt volute casing pump with a back pull-out design to API 610. Specific requirements of ISO 13709 or 11th edition. The pumps ...

Flow: 0.28 l/min - 14.81 l/min
Pressure: 0 bar - 1.45 bar

The high pressure pumps of MSF series are single acting pumps with air drive head and distance piece with 1,000 pressure bar (14,500 psi). The Pumps are perfect to use in the chemical ...

Flow: 1.36 l/min - 18.53 l/min
Pressure: 0 bar - 1.45 bar

The GSF series of high pressure pumps are single acting pumps that generates a pressure capacity of up to 1450 bar. Characterized by their rigid designs that are ideal for various chemical ...

Flow: 2.85 l/min - 25.5 l/min
Pressure: 0 bar - 3 bar

GPD 2 series high pressure pump is designed in double acting assembly with single or double air drive head fitting. This device is applicable for operations where air drive pressure rating requirement belongs to a range ...

Flow: 650 m³/h
Pressure: 25 bar
Head: 150 m

The standard chemical process pumps of the SIHIISOchem have a horizontal structure and one-stage volute casing pumps with dimensions to ISO 2858 / EN 22858. It has ...

Flow: 2,200 m³/h
Pressure: 25 bar
Head: 160 m

... horizontal, single-stage volute casing pumps designed in compliance with ISO2858 / EN22858 pumps high temperature liquids(> 200 ºC) and offer special execution with center line feet upon request. The ...

Flow: 1,200 m³/h
Pressure: 10 bar
Head: 100 m

... of horizontal, single-stage volute casing pumps are designed according to ISO2858 / EN22858 and enlarged sizes and feature full dismantling of the bearing unit towards the drive end without removing the pump ...

Flow: 0 l/h

The compact ViscoTec Dispenser 4RD6-EC ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, consistent and reliable ...

Flow: 0 m³/h - 1,200 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

... stainless steel pickling lines, exhaust air scrubbers, and industrial waste water treatment. The pumps are horizontal-type with mechanical seal. The chemical pumps are provided in PP, ...

Flow: 0 m³/h - 200 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 90 m

The armoured pumps of the NPC series are designed to meet chemical process industry standards and are ideally suited to pumping chemicals and solvents. The MUNSCH ...

Flow: 0 m³/h - 150 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 80 m

... close-coupled pumps of the NPC-B series are designed to meet chemical process industry standards and are ideally suited to pumping chemicals and solvents. The MUNSCH ...

Flow: 250 m³/h
Pressure: 16 bar
Head: 1 m - 135 m

30% solids can be safely pumped Also pumps liquids with a higher gas content High reliability through optimum design of the pump for solids Low spare part costs for mechanical seal through long service ...

Flow: 200 m³/h
Pressure: 16 bar
Head: 1 m - 120 m

30% solids can be safely pumped Also pumps liquids with a higher gas content High reliability through optimum design of the pump and mechanical seal RG4 for solids Low replacement costs for mechanical ...

Flow: 100 m³/h
Pressure: 16 bar
Head: 1 m - 90 m

30% solids can be safely pumped Also pumps liquids with a higher gas content Highly service-friendly: few components, very little setting work Minimised storage costs: pump can be adapted for a wide variety ...

Flow: 366.5 m³/h
Pressure: 1,100 bar

The RDP range of Reciprocating Plunger Pumps by Ruhrpumpen comes in various sizes and in triplex and quintuplex formats. They are designed and manufactured in accordance to the lates edition of API 674 and ISO 13710. ...

Flow: 1,150 m³/h
Pressure: 26 bar
Head: 235 m

The CPO ANSI Process Pump is constructed around a simple hydraulic and mechanical design concept that guarantees high efficiency through a wide range of applications with flexibility and interchangeability. ...

Flow: 227 m³/h
Pressure: 26 bar
Head: 128 m

Designed to dimensionally meet the ANSI B73.1 specification, the IPP process pump is a versatile pumping unit that can handle a wide range of non-corrosive and corrosive liquids efficiently, ...

Flow: 70 m³/h - 324 m³/h
Head: 10 m - 40 m
Power: 60 kW

... different working request. This type of pump typically used in process plant transfers, corrosive and caustic industrial waste, recycling-washing plants, minerals refinery, mineral recovery and chemical ...

Flow: 65 m³/h
Pressure: 0.28 mbar
Head: 28 m

Flow: 0 m³/h - 900 m³/h
Pressure: max 8.0 bar
Head: max 80.0 m

Submersible pumps made of vinyl ester thermosetting resins, Saturnsub have a high mechanical strength, dimensional stability and an excellent chemical resistance. The electric motor is completely made ...

Flow: 750, 700 m³/h
Pressure: max 8.0 bar
Head: 90, 130 m

... seal are available so the pump performance is always at its best no matter the liquid pumped. Saturn pumps are in accordance with ANSI / ASME B73.1 regulations. The design and the inherent resistance ...

Flow: 330, 420 m³/h
Head: 50, 35 m

... resistance of FRP confer to these pumps the mechanical strength that can be compared to pumps constructed with metallic alloys. The construction available with different blends of epoxy-vinyl-ester makes ...

Flow: 1 m³/h - 80 m³/h
Pressure: 16 bar
Head: 0 m - 40 m

Chemical Process Pumps Description : CPM series pumps are single stage, end suction volute type pumps. Open impellers are used in accordance with DIN ...

Flow: 25 l/h - 576 l/h
Pressure: 5, 7, 10 bar
Power: 0.37 kW

GM mechanical diaphragm metering pump is LIGAO heavy-duty designed process pump for chemical dosing. It is reliable pump require minimal maintenance ...

Flow: 2 m³/h - 25 m³/h
Pressure: max 8.0 bar
Head: max 9.0 m

... the pump body. Characteristic of the peristaltic pump FMP: -Power supply: 380v ac standard / Also available in 220v and possibly air -Suction capacity up to 9 m this -Ability to walk to dry without ...

Flow: 15, 30, 20 l/min
Head: 1.7, 4.9, 2.8, 7.1 m
Power: 0.72, 0.6 kW

... joined centrifugal pumps consisting of construction group 5 are dependent centrifugal pumps with spiral bodies. These pumps can perform in parallel position mad out of mono bloc structure. ...

Flow: 60, 70, 86 l/min
Head: 5, 7.5, 10 m
Power: 1.44, 0.12, 0.18 kW

... joined centrifugal pumps consisting of construction group 5 are dependent centrifugal pumps with spiral bodies. These pumps can perform in parallel position mad out of mono bloc structure. ...

Flow: 118, 80, 60 l/min
Head: 7.3, 5, 9.5 m
Power: 0.13 kW - 0.44 kW

... joined centrifugal pumps consisting of construction group 5 are dependent centrifugal pumps with spiral bodies. These pumps can perform in parallel position mad out of mono bloc structure. ...

Flow: 2,500 m³/h
Head: 320 m

The Clydeunion Pumps Duo Glide-e extent is the most recent era of axial split and two stage pumps. The range has been produced by utilizing the most recent 3D and FEA dissection programming together with ...

Flow: 1,350 m³/h
Head: 275 m

... , is a dual stage, axially split, casing pump, suitable for desalination, water treatment, metal manufacturing and mining applications. This device is supplied with both configured and engineered-to-order pumps, ...

Flow: 1,365 m³/h
Head: 305 m

The Clydeunion Pumps CUP-OH3 model VLK-BB is a progressed outline Single stage, vertical, in-line bearing sectioned radiating pump with uncommon adaptability and flexibility to meet the necessities of ...

Flow: 0.1 l/min - 2,400 l/min
Pressure: 0 Pa - 20,000,000 Pa

Cinox® therminox® gear pumps are corrosionresistant and heatable stainless steel conveying units that satisfy the stringent quality requirements of today's chemical processing industry. Thanks to the ...

Flow: 2.5 l/min - 265 l/min
Pressure: 0 bar - 200 bar

... and short dwell times. This new pump series combines the outstanding flow characteristics of the polymer pumps with the exacting requirements of the chemical industry. Optimum fill ...

Flow: 1,300 m³/h
Pressure: 12 bar
Head: 116 m

... industry-leading Durco Mark 3 TM chemical process pump, the ESP3 is ruggedly built to handle tough applications. It is the only vertical wet-pit immersion sump pump to ...

Flow: 2 m³/h - 800 m³/h
Pressure: 16 bar
Head: 0.9 m - 60 m

Process centrifugal, vertical pump. Available with two or three-channel impeller, semi-open or vortex. RWCP supplied with discharge pipe up to the outside of the base plate. RWCN without discharge pipe. ...

Flow: 722 m³/h
Head: 105 m

Goulds Pumps' 3171 Vertical Sump and Process Pumps are the ideal vertical process and sump pumps. These API 610 9th edition, compliant VS4 pumps ...

Flow: 30 l/min - 1,600 l/min
Head: max 80.0 m
Power: 2.2 kW - 22 kW

The MTFO series is characterized by its wide power range of up to 22kW. The open impeller enables also applications with a solids content of up to 30%. For temperature range - 80 to 280 °C

Flow: 35, 33 l/min
Pressure: 1.4 bar
Head: 2.2, 3.3 m

... rate 60Hz: up to 33 Litres/min (8.7 gallons/min) Open Flow Maximum 3.3m (10.8') head Model No.: NDP35/3 Manufactured in chemical resistant thermoplastics entirely non-metallic Magnetic couplings provide energy efficient ...

Flow: 163 l/min
Pressure: 1,000 bar
Power: 38 kW

The P3-10 pump is a high pressure reciprocating plunger pump from Uraca. It is engineered for use in water, and is widely employed in hydrodynamic cleaning tasks. The model has a maximum pump ...