{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{product.defLight}}
{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{product.defLight}}
{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
drum pump / paint / for adhesives / for resin
drum pump
VISCOFLUX

Flow: 50 l/min
Pressure: 8 bar

... initial purchase costs compared to stationary systems- High flexibility due to mobility of the system- Low disposal costs due to small residual quantity in the drum- Process safety even if the pumping process is interrupted ...

See the other products
FLUX-GERÄTE GMBH
drum pump / normal priming
drum pump
F/FP 425

... amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump ...

See the other products
FLUX-GERÄTE GMBH
drum pump / normal priming
drum pump
F 424

The sealless pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump ...

See the other products
FLUX-GERÄTE GMBH
drum pump / normal priming / mixing
drum pump
F 426

... F 426 can be temporarily operated as pure mixing pump. By turning the adjusting lever, the pump can be easily adjusted to "mixing" or "pumping". The pump is easy to dismantle for rapid ...

See the other products
FLUX-GERÄTE GMBH
drum pump / normal priming
drum pump
F 430 PP

Pump F 430 PP 100/50 in polypropylene was designed for higher delivery pressure. Instead of a rotor, it is equipped with an impeller in a pump housing. In connection with the powerful FLUX motors the ...

See the other products
FLUX-GERÄTE GMBH
chemical pump / for gas / electric / diaphragm
chemical pump
EX series

Flow: 20 l/min
Pressure: 2 bar

See the other products
CHARLES AUSTEN PUMPS LTD / BLUE DIAMOND PUMPS INC
chemical pump / air / for gas / electric
chemical pump
B85T PTFE Series Pumps

Flow: 20 l/min
Pressure: 1 bar

See the other products
CHARLES AUSTEN PUMPS LTD / BLUE DIAMOND PUMPS INC
water pump / for chemicals / for gas / electric
water pump
Liquid Diaphrgam Pumps

Flow: 1.2 l/min
Pressure: 2 bar

... priming liquid diaphragm pumps give a flow of up to 1600ml/min water and liquid applications with maximum lift lift of 5.0 m and pressure head of 20 mH2O Manufactured in the UK by Charles Austen Pumps ...

See the other products
CHARLES AUSTEN PUMPS LTD / BLUE DIAMOND PUMPS INC
water pump / for chemicals / electric / diaphragm
water pump
Liquid Diaphrgam Pumps

Flow: 1.6 l/min
Pressure: 2 bar
Head: 0 m - 20 m

... priming liquid diaphragm pumps give a flow of up to 800ml/min water and liquid applications with maximum lift lift of 2.0 m and pressure head of 20 mH2O Manufactured in the UK by Charles Austen Pumps ...

See the other products
CHARLES AUSTEN PUMPS LTD / BLUE DIAMOND PUMPS INC
ink pump / electric / diaphragm / self-priming
ink pump
Liquid Diaphrgam Pumps

Flow: 1.6 l/min
Pressure: 2 bar
Head: 0 m - 20 m

Charles Austen Ink Pumps self priming liquid diaphragm pumps give a flow of up to 1600ml/min water and liquid applications with maximum lift lift of 5.0 m and pressure head of 20 mH2O Manufactured in ...

See the other products
CHARLES AUSTEN PUMPS LTD / BLUE DIAMOND PUMPS INC
water pump / for chemicals / electric / plunger
water pump
Sigma/ 2

Flow: 2 l/h - 76 l/h

See the other products
ProMinent GmbH
chemical pump / electromagnetically-driven / diaphragm / metering
chemical pump
Beta®

Flow: 0.74 l/h - 32 l/h
Pressure: 2 bar - 25 bar

The solenoid metering pump Beta® is equipped with all setting and control functions for modern water treatment and chemical metering. Compared to its predecessor model, it features pulse step down and ...

See the other products
ProMinent GmbH
chemical pump / solenoid-driven / diaphragm / chemical
chemical pump
gamma/ X

Flow: 2.3 l/h - 45 l/h
Pressure: 2 bar - 25 bar

... significantly increased: no additional parts come into contact with the feed chemical, there are no additional sealing surfaces and no electronic components come into contact with the feed chemical. Whether ...

See the other products
ProMinent GmbH
chemical pump / solenoid-driven / diaphragm / electromechanical
chemical pump
delta®

Flow: 7.5 l/h - 75 l/h
Pressure: 2 bar - 25 bar

The delta® pump from ProMinent uses a controllable solenoid drive. It has the ability to adapt and monitor suction and pressure strokes completely for each application. The product offers a wide range of drive options, ...

See the other products
ProMinent GmbH
chemical pump / electric / diaphragm / metering
chemical pump
Sigma/ 1 (Basic Type)

Flow: 17 l/h - 144 l/h
Pressure: 4 bar - 12 bar

The Sigma/1 Motor Diaphragm Metering Pumps, combined with Sigma/2 and Sigma/3, provide a seamless product line. Designed by ProMinent, they cover the capacity ranges from 17 to 1.030l/h at control conception, spare parts ...

See the other products
ProMinent GmbH
chemical pump / solenoid-driven / self-priming / medical
chemical pump
LPG series

The Lee Company’s new LPG Series Inert Solenoid Pump was designed to offer greater design flexibility and significant cost savings to the medical and scientific industries. The LPG pump features a revolutionary ...

See the other products
THE LEE COMPANY
dispensing pump / for chemicals / solenoid-driven / self-priming
dispensing pump
LPD series

Pressure: 60, 95 psi

... variable displacement pump meets the demands of modern day applications: consistent performance and significant cost savings in a compact lightweight package. Designed to be completely maintenance free, ...

See the other products
THE LEE COMPANY
chemical pump / solenoid-driven / self-priming / for medical applications
chemical pump
LPM series

The Lee Company’s new LPM Series Inert Solenoid Pump was designed to offer greater design flexibility and significant cost savings to the medical and scientific industries. The LPM pump features a revolutionary ...

See the other products
THE LEE COMPANY
chemical pump / solenoid-driven / self-priming / for medical applications
chemical pump
LPL2

The Lee Company's new LPL2 Inert Solenoid Pump was designed to offer greater design flexibility and significant cost savings to the medical and scientific industries. The LPL2 pump features a revolutionary ...

See the other products
THE LEE COMPANY
chemical pump / solenoid-driven / diaphragm / self-priming
chemical pump
LPL series

Pressure: 5 psi
Power: 2 W - 2.5 W

Lee LPL Series solenoid pumps provide accurate, repeatable, fixed volume dispensing in a small lightweight package. A normally closed seat prevents siphoning when the pump is de-energized. LPL ...

See the other products
THE LEE COMPANY
chemical pump / electric / peristaltic / metering
chemical pump
Qdos

Flow: 0 us gal/min - 31.7 us gal/min
Pressure: 0 psi - 100 psi

Accurate, versatile chemical metering pumpsDelivering flow rates that remain constant right up to 100 psi Qdos peristaltic chemical metering pumps give users a unique advantage over diaphragm ...

See the other products
Watson-Marlow Fluid Technology Group
chemical pump / electric / peristaltic / for the biotechnology industry
chemical pump
Quantum

Flow: 0 l/min - 20 l/min
Pressure: 0 bar - 3 bar

... bioprocessing pump with its patented ReNu SU Technology® cartridge. Quantum offers a step change in pump technology enabling higher downstream process yields throughout the pressure range, exceeding the ...

See the other products
Watson-Marlow Fluid Technology Group
chemical pump / electric / peristaltic / process
chemical pump
730 series

Flow: 0 us gal/min - 8.8 us gal/min
Pressure: 30 psi

730SN, 730UN, 730DuN and 730BpN peristaltic process pumps fitted with tube element pumpheads 730 range of peristaltic pumps offer four drive options, colour display and intuitive menu structure provide ...

See the other products
Watson-Marlow Fluid Technology Group
chemical pump / electric / peristaltic / medium-flow
chemical pump
400F/L2

Flow: 0 l/min - 1 l/min

... 400F/R1 if you require a single tube pumphead). The 400F/L2 offers our widest range of options, allowing you to customize a pump exactly to your application.

See the other products
Watson-Marlow Fluid Technology Group
chemical pump / peristaltic / metering / process
chemical pump
621 series

Flow: 0 us gal/min - 12.2 us gal/min
Pressure: 0 bar - 2 bar

... GPM and speeds up to 291 RPM, and can operate on maximum pressures of 4 bar. All pumps are made according to the IP55protection standard, meaning they have a robust, compact design and are very cost-effective ...

See the other products
Watson-Marlow Fluid Technology Group
chemical pump / gear / compact / small
chemical pump
DARTec®

DARTec® – The Pump Series for the Highest Dispensing Precision Small, lightweight, compact, efficient – this describes the new pump series from Beinlich Pumpen GmbH. DARTec® (dispense-automation-robot-technology) ...

water pump / for chemicals / paint / oil
water pump
DMP 1/2" series

Flow: 0 l/min - 65 l/min
Pressure: 0 bar - 8 bar

This is a double diaphragm - pump from Lutz that is designed to suit dispensing of soap, acids, solvents, chemicals, and feed. It can also be used for ink recirculation and drum pumping. It can perform ...

See the other products
Lutz Pumpen GmbH
paint pump / water / for chemicals / condensate
paint pump
DMP 1/2" series

Flow: 0 l/min - 57 l/min
Pressure: 0 bar - 8.3 bar

This double diaphragm pump is utilized for ink recirculation and feed, solvents, chemicals, 200 l-drum pumping, soap dispensing, acids, and more. It offers completely lube-free and non-stalling operation ...

See the other products
Lutz Pumpen GmbH
chemical pump / water / paint / acid
chemical pump
DMP 3/8" series

Flow: 0 l/min - 34 l/min
Pressure: 0 bar - 8 bar

The double diaphragm pump is a 3/8'' non-metallic pump that is usually used a variety of applications such as chemical re-circulation and feed and liquids with solid particles such as ...

See the other products
Lutz Pumpen GmbH
paint pump / water / for chemicals / condensate
paint pump
DMP 1 1/2" series

Flow: 0 l/min - 435 l/min
Pressure: 0 bar - 8.3 bar

DMP 1 1/2'' double diaphragm pump is an industrial solution for applications like filter press, tank cleaning, pigment and resin treatment. The system allows operation without requiring lubrication and stalling. It enables ...

See the other products
Lutz Pumpen GmbH
water pump / for chemicals / paint / condensate
water pump
DMP 1" series

Flow: 0 l/min - 182 l/min
Pressure: 0 bar - 8.3 bar

Fields of application: drum and small tank transfer, pickling solutions, chemical feed, etc. Features: Absolutely lube-free and non stalling operation Can safely run dry Self-priming dry or wet Centre ...

See the other products
Lutz Pumpen GmbH
paint pump / for adhesives / for ink / for solvents
paint pump
PH10A-XSS-XXT

Flow: 98.4 l/min

ARO 3:1 Ratio High Pressure Pump PH10A-XSS-XXT feature an operating capacity of up to 300 psi due to its dual power engines that control the fluid handling diaphragms. This stall-free machine offers an excellent material ...

See the other products
ARO, Ingersoll Rand
adhesive pump / for ink / pneumatic / piston
adhesive pump
SP0665S21XXXXXXX

Flow: 0 l/min - 5.1 l/min
Pressure: 0 psi - 7475 psi

Integrated wet cup ensures extended pump life Reliability - Eliminating downtime, the unbalanced air valve ensures stall-free pump operation Durability - Hard chrome plated plunger improves ...

See the other products
ARO, Ingersoll Rand
adhesive pump / for ink / pneumatic / piston
adhesive pump
SP0646S21XXXXXXX

Flow: 0 l/min - 6.9 l/min
Pressure: 0 psi - 7485 psi

Integrated wet cup ensures extended pump life Reliability - Eliminating downtime, the unbalanced air valve ensures stall-free pump operation Durability - Hard chrome plated plunger improves ...

See the other products
ARO, Ingersoll Rand
adhesive pump / for ink / pneumatic / piston
adhesive pump
TP0665S21XXXXXXX

Flow: 0 l/min - 5.1 l/min
Pressure: 0 psi - 7475 psi

Integrated wet cup ensures extended pump life Reliability - Eliminating downtime, the unbalanced air valve ensures stall-free pump operation Durability - Hard chrome plated plunger improves ...

See the other products
ARO, Ingersoll Rand
adhesive pump / for ink / pneumatic / piston
adhesive pump
TP0844S21XXXXXXX

Flow: 0 l/min - 14.3 l/min
Pressure: 0 psi - 5964 psi

Integrated wet cup ensures extended pump life Reliability - Eliminating downtime, the unbalanced air valve ensures stall-free pump operation Durability - Hard chrome plated plunger improves ...

See the other products
ARO, Ingersoll Rand
solvent pump / paint / air-driven / double-diaphragm
solvent pump
8.6 bar

Flow: max 10200.0 l/h
Pressure: max 9.0 bar

Available in aluminium and stainless steel this versatile 1 air operated double diaphragm pump is ideal for pumping a variety of waterborne and solvent based coatings including; Adhesives, catalyzed varnishes, paints, ...

See the other products
CARLISLE FLUID TECHNOLOGIES EUROPE
paint pump / double-diaphragm / dosing
paint pump
max. 7 bar, max. 7.7 l/min | DX70

Flow: 252 l/h
Pressure: max 7.0 bar

The pump's acetal body, with its soft seats and st. st. balls, offers universal paint compatibility, including ceramic glaze coatings. The diaphragm's innovative design, with built-in fluid regulator, offers constant ...

See the other products
CARLISLE FLUID TECHNOLOGIES EUROPE
paint pump / pneumatic / stainless steel / transfer
paint pump
7.5 - 15 l/min | Maple

Flow: max 450.0 l/h
Pressure: max 6.0 bar

... the ceramic coated pistons and tungsten carbide ball seats. In addition to high-quality materials, the construction of the pump includes surface treatments. Preventative maintenance is not required since there are ...

See the other products
CARLISLE FLUID TECHNOLOGIES EUROPE
paint pump / pneumatic / piston / transfer
paint pump
4 - 8 l/min | Maple 7/15, 8/25

Flow: 0.01 m³/h - 0.21 m³/h
Pressure: 1 bar - 6 bar

... and consistent paint flow. The horizontal piston pumps have a ratio of 15 and 25:1. Control valve has a metal spool-and-sleeve construction resulting in a long service life. With a patented design, the pump ...

See the other products
CARLISLE FLUID TECHNOLOGIES EUROPE
paint pump / pneumatic / piston / for spraying
paint pump
Gamme pompe à piston MXL

... Valve Technology Enables pump to change over quickly to significantly reduce pulsation - Long Lasting Ceramic Coated Piston Rods Superior wear resistance lasting up to three times longer than hard chrome pistons - ...

See the other products
CARLISLE FLUID TECHNOLOGIES EUROPE
water pump / for chemicals / slurry / for food products
water pump
Warman® QCL

Flow: 0 m³/h - 70000 m³/h
Pressure: 0 psi - 145 psi

The Warman® Q-Series Axial Flow Pumps are a high reliable and energy efficient choice for continuous circulation of abrasive and corrosive fluids. This model ensures low maintenance costs and high quality from a company ...

See the other products
Weir Minerals
water pump / for chemicals / slurry / for food products
water pump
Warman® QCV

Flow: 0 m³/h - 70000 m³/h
Pressure: 0 psi - 145 psi

The Warman® Q-Series Axial Flow Pumps offer high quality and reliability, high efficiencies and low energy consumption for continuous circulation of fluids, clean or solid-contaminated. The Q pumps ensure ...

See the other products
Weir Minerals
water pump / for chemicals / slurry / for food products
water pump
Warman® QL

Flow: 0 m³/h - 10000 m³/h
Pressure: 0 psi - 145 psi

The Warman® Q-Series Axial Flow Pumps are designed for continuous circulation of fluids: corrosive or abrasive, clean or solid-contaminated. The Q pumps offer low energy consumption, low maintenance costs ...

See the other products
Weir Minerals
chemical pump / slurry / electric / piston
chemical pump
GEHO® ZPM

Flow: 10 m³/h - 800 m³/h
Pressure: 1500000 Pa - 30000000 Pa
Power: 10 kW - 2500 kW

The GEHO® ZPM pump is based on the crankshaft driven technology with dual-cylinder, dual-action and high-pressure piston. The unique technology of GEHO® diaphragm divides the propelled slurry from all other moving parts ...

See the other products
Weir Minerals
wastewater pump / for chemicals / slurry / electric
wastewater pump
GEHO® TZPM

Flow: 10 m³/h - 1500 m³/h
Pressure: 1500000 Pa - 30000000 Pa
Power: 100 kW - 4000 kW

... features, the pump is enabled of producing pressures up to 300 bar. Its 75 % solids content and an 8 mm particle content features are also provided by the pump. The GEHO® diaphragm separates the ...

See the other products
Weir Minerals
adhesive pump / electric / centrifugal / control
adhesive pump

Pressure: 0 bar - 320 bar

The Rotary-Driven, Hydraulic Pump and Reel is ideal for quick and easy access to critical lubrication points. It is equipped with a rotary-activated, hydraulic pump, complete with a heavy-duty, 35- or ...

See the other products
Lincoln
adhesive pump / pneumatic / double-diaphragm / heavy-duty
adhesive pump
AODD

Pressure: 0 psi - 125 psi

The AODD is manufactured by Lincoln, and is a twin-inlet, air-operated, twin-diaphragm pump that is ideal for constant usage in intensive vehicle service, and as well as industrial operations. The unit has been specifically ...

See the other products
Lincoln
adhesive pump / lever / centrifugal / semi-submersible
adhesive pump
1340

Lincoln has introduced its new Model 1340 Lever Action Barrel Pump for automotive, agricultural and industrial applications. The unit’s extended pump body improves top-of-barrel clearance while providing ...

See the other products
Lincoln
adhesive pump / air-driven / piston / semi-submersible
adhesive pump
3.5:1

Pressure: 1.4 bar - 8.3 bar

... Value Series 3.5:1 Air-operated Pump for medium- to low- volume applications such as those found in vehicle service facilities, car dealerships, small contractors, farmers and agriculture equipment dealers. ...

See the other products
Lincoln
adhesive pump / air-driven / diaphragm / for solids-laden fluids
adhesive pump
85634, 85635

... 85635 Air-operated, UL-listed Diaphragm Pumps. A result of Lincoln’s continuous effort to provide superior pump technology, the pumps deliver higher flow rates and greater solids handling ...

See the other products
Lincoln
chemical pump / radial piston / rugged / high-performance
chemical pump
RKP series

Pressure: 280 bar - 420 bar

Dubbed as the RKP, the Moog radial piston pump has assisted the industrial marketplace for over 30 years and is renown for its reliable and powerful design. Since 2001, when Moog gained the PKB portfolio from Bosch, is ...

paint pump / air-driven / plunger / piston
paint pump
64B

Flow: 0.95 l/min - 7.57 l/min
Pressure: 207, 103 bar

64B Nordson® pump are comprehensively designed to accommodate multiple guns with an average volume capacity, or a single gun with high-volume viscosity elements. It operates with positive displacement at minimal cycle ...

See the other products
Nordson Industrial Coating Systems
powder pump / paint / pneumatic / compact
powder pump
Encore®

The Encore series of 90° Powder Pumps from NORDSON employs 90° configurations, and uses less compressed air which enables more powder transport to the part. This provides a softer spray pattern for more constantly high-quality ...

See the other products
Nordson Industrial Coating Systems
paint pump / electric / plunger / heavy-duty
paint pump
PermaFlo® series

PermaFlo® Series Pumps with its strong construction and intelligent design can handle the rigors of pumping abrasive, higher solids coatings. It can also accept a varied range of pressure and volume, thanks to its modular ...

See the other products
Nordson Industrial Coating Systems
paint pump / compact / high-capacity / Venturi
paint pump
Prodigy® Generation II

Flow: 198 l/min - 225 l/min
Pressure: 4.8 bar

... cable and provides optional lance extensions. The gun pump offers a more durable pinch valve, check valve and metal filter disc. It also has a stronger molded pump body. The transfer pump ...

See the other products
Nordson Industrial Coating Systems
paint pump / pneumatic / piston / standard
paint pump
StediFlo™

Flow: 2.3, 4.6, 9.1, 18.2 l/min
Pressure: 64, 48, 24, 84 bar

For liquid application performance and high efficiency, the StediFlo pumps are unmatched. Suitable for a vast range of volume and pressure requirements, these products also provide high performance levels and versatility. ...

See the other products
Nordson Industrial Coating Systems
condensate pump / electric / centrifugal / with frequency converter
condensate pump
PM

The pump module is used for transporting the feed water from the feed water tank into the shell boiler or for feeding the condensate from the condensate tank into the deaeration system. The pump module ...

drum pump / for adhesives / piston / chemical-resistant
drum pump
P200/1H, P200/2H

Flow: 0.6 l/min - 6 l/min
Pressure: 20 bar - 400 bar

The P200 and P200-H series of drum pumps have maximum rate of 20 cycles/min and ensure efficient performance. These pumps can be easily maintained because of its reliable material. These chop check ...

chemical pump / electric / canned motor / for the chemical industry
chemical pump
Etaseco

Flow: 3 m³/h - 250 m³/h
Pressure: 0 bar - 16 bar
Head: 9 m - 100 m

... volute casing pump that can be mounted both vertically and horizontally. It has a back pull design and a completely enclosed canned motor. It has a radial impeller and emits a very low noise level. It is a single entry ...

See the other products
KSB
chemical pump / electric / canned motor / for the chemical industry
chemical pump
Secochem Ex

Flow: 1 m³/h - 300 m³/h
Pressure: 0 bar - 25 bar
Head: 14 m - 220 m

... Seal-less Volute Casing Pump is compliant with EN 22 858/ISO 2858 standards. It is generally utilized for applications involving the management of flammable, explosive, corrosive, and hazardous liquids in the chemical ...

See the other products
KSB
chemical pump / magnetic-drive / centrifugal with volute / for the chemical industry
chemical pump
Magnochem

Flow: 1 m³/h - 1400 m³/h
Pressure: 0 bar - 40 bar
Head: 3.5 m - 236 m

The Magnochem from KSB is a single-stage, mag-drive pump that is equipped with a radial impeller. Designed with a pull-out structure, this horizontal, seal-less, single-entry pump complies to ISO 2858, ...

See the other products
KSB
chemical pump / magnetic-drive / centrifugal with volute / for the chemical industry
chemical pump
Magnochem-Bloc

Flow: 1 m³/h - 754 m³/h
Pressure: 0 bar - 40 bar
Head: 3.5 m - 236 m

... casing pump is designed according to the ISO 2858 / EN 22 858 / ISO 5199 standards with single level and radial impeller. It is designed to ATEX to easily handle destructive, poisonous, valuable, explosive, foul-smelling ...

See the other products
KSB
wastewater pump / for chemicals / electric / centrifugal with volute
wastewater pump
CPKN

Flow: 1 m³/h - 4800 m³/h
Pressure: 0 bar - 25 bar
Head: 2 m - 275 m

CPKN pumps are constructed in horizontal layout of radially split volute casing setup in back pull-out design. It is a reliable pumping solution with compliance to EN 22 858, ISO 2858 and ISO 5199 standards. This assembly ...

See the other products
KSB
chemical pump / bellows / bellows / handling
chemical pump
Furon-Astipure-II-A2CH1F8

Flow: 4 us gal/min - 16 us gal/min
Pressure: 0 bar - 85 bar

... reassembly. The bigger pumps are utilized for transporting and pumping mass chemicals. The smaller frames are perfect for drawing requisitions, and for taking care of synthetic mechanical cleaning ...

chemical pump / slurry / bellows / handling
chemical pump
A2CH3-F16-

Flow: 4 us gal/min - 16 us gal/min
Pressure: 0 bar - 85 bar

... series pump is designed based on more than 20 years of experience in handling aggressive and corrosive media, as well as in applications where chemical inertness is a must. Featuring a 100% PFA and PTFE ...

chemical pump / electric / peristaltic
chemical pump

Flowrox Smart Solutions TM are a new way to combine your flow control products and Industrial Internet of Things (IIoT). They increase your productivity through optimization and online predictability.

water pump / slurry / paint / stepper motor-driven
water pump

... optimization and online predictability. Flowrox Smart LPP-T pump - SLPP Series provides online information on pumping process, pumping performance and condition of the pump set. - Smart Pump ...

chemical pump / electric / rotary lobe
chemical pump
BLUEline

Flow: 1 m³/h - 1500 m³/h
Pressure: 0 bar - 12 bar

The BLUEline rotary lobe pump is our proven "continuous runner". 21 pump sizes and the large selection of materials and rotors (different geometric designs and materials) allow an individual design of ...

See the other products
BORGER
paint pump / for solvents / for ink / for resin
paint pump
AL25

Flow: 10 m³/h - 60 m³/h
Pressure: 4 bar

... a transportable self-priming pump. The requirements included: ATEX zone 1, suitable for all types of oil and diesel products, gentle product pumping and high suction capacity.The solution was the Boerger Rotary Lobe ...

See the other products
BORGER
solvent pump / for adhesives / for resin / electric
solvent pump
StepALES 004

Flow: 3 m³/h - 8 m³/h
Pressure: 0 bar - 5 bar

... positive displacement pump to fill small containers with low pulsation and minimal shear action. The pump also had to have a seal which could cope with the hardened pumped medium.The ...

See the other products
BORGER
chemical pump / electric / rotary lobe
chemical pump
ONIXline

Flow: 2.7 m³/h - 134 m³/h
Pressure: 13, 16 bar

The ONIXline rotary lobe pumps were developed by means of the most advanced flow simulation technology and experience in rotary lobe pump construction from several decades. The pump stands ...

See the other products
BORGER
water pump / for chemicals / electric / rotary lobe
water pump
MAR060

Flow: 500 m³/h

... ballast pumps. Compared to centrifugal pumps, Börger Rotary Lobe Pumps have the advantage of being able to both fill and discharge tanks simply by reversing the direction of rotation. ...

See the other products
BORGER
gear pump / chemical / normal priming / low-noise
gear pump
KF 730...1500

Flow: 200 l/min - 2000 l/min
Pressure: 25 bar

Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required on the modular principle and also ...

See the other products
KRACHT
adhesive pump / magnetic-drive / gear / transfer
adhesive pump
KF 4/125...KF 6/730

Pressure: 0 bar - 25 bar

The KF 4/125...KF 6/730 is a transfer gear pumps designed with magnetic coupling that can be used on different applications. This magnetic coupling works as a shaft seal for the transmission of the torque. It is also ...

See the other products
KRACHT
chemical pump / gear / transfer / high-pressure
chemical pump
KP.../434

Pressure: 0 bar - 150 bar

Description The KP.../434 high-pressure gear pumps are suitable for non-abrasive fluids. Examples of such fluids are, e.g., silicates (sodium silicate), isocyanates and polyols without fillers such as are used in PUR ...

See the other products
KRACHT
adhesive pump / gear / transfer
adhesive pump
KF 32... 80

Pressure: 0 bar - 25 bar

The KF 32 ... 80 Gear Pump has a t-valve that contains a connected pressure control valve, along with an isolated tank attachment. The valve provides good control and dynamic through conformist damping, at a vibration-free ...

See the other products
KRACHT
adhesive pump / gear / with universal valve / transfer
adhesive pump
KF 32... 112

Pressure: 0 bar - 25 bar

The KF 32...112 model engineered by Kracht, is a transfer gear pump that features a 32-112 cm ³ universal valve. This device enables the varying direction of rotation of the drive shaft towards the same outlet port. In ...

See the other products
KRACHT