|
|
|
The unique floating pick-up skims the tramp oil and coolant mix from the top of the machine sump. As the liquid moves slowly through the patented steel coalescing plates, oil droplets as small as 20 microns are separated from the coolant and rise to the top of the PhaSep unit. When the oil layer builds up sufficiently in the unit, it passes over a specially-designed weir, and is trapped away from the clean coolant. The oil can then be removed periodically through the waste oil drain. Coolant, cleaned of 99% of contaminated oils, is returned directly to the machine sump.
|
|
Freddy TOS
Simple but effective, the Freddy TOS is our most popular tramp oil separator. The TOS is designed to run continuously, removing tramp oil from machine tool coolants or other aqueous systems including quench tanks and wash systems. Also available with a UV option for biological control. The Freddy TOS is easy to use and portable.
Sanborn SOS
The Sanborn SOS is designed for large volume applications and central sumps. Two models are available that can process contaminated coolants at flow rates up to 10 gpm. This versatile coalescer is available as a stationary system, a portable system, or integrated with our other technologies as part of an engineered system.
|
|
|
|
|
|
The emulsions used in mechanical workings and the liquids used in washing machines, accumulate light products which do not mix with water on the surface.
This veil, which can reach considerable sizes, from 0,1 to 2 mm, creates a barrier and prevents air from entering into contact with the emulsion.
This allows for the formation of anaerobic flora bacteria, which are the main causes of the decay and the putrefaction of the emulsions.
The SKIM eliminator of superficial oils, thanks to its particular shape, to the materials used and to its installation and utilization facility, is adaptable to being used in any kind of basin or tank.
Due to its great supply of accessories it is possible to position the SKIM either on the basin edge, or on the cover, or encased, or on an internal structure.
Functioning: the disc, immersed into the liquid, due to its rotation, pushes outside the polluting agents that stick to it.. The disc, whilst rotating, meets two scrapers fitted with a rubber edge which remove everything that gets stuck to the disc and through the appropriate off-let directs them outside.
It has been proved that the use of SKIM maintains the quality of the refrigeration for a long time whilst eliminating bad odours that generate in the presence of anaerobic flora bacteria.
|
|
|
|
|
|
PetroXtractor®: Oil Skimming for Wells and Other Small Openings with Large Vertical Drops
The Abanaki PetroXtractor is a dependable and cost effective means of removing oil, fuel, and other floating hydrocarbons from water where access to the fluid surface is limited. It provides efficient remediation of groundwater contaminated by oil, using existing recovery and monitoring wells. Often, the PetroXtractor working alone will reduce oil or fuel content to an acceptable E.P.A. level. Models are available for two inch, four inch, and six inch or larger ID well casings, with removal rates up to 12 gph. (based on SEA 30 motor oil). Depths of 100 feet or more can be accommodated without the use of pumps.
The PetroXtractor is an oil skimmer that makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the unit's continuous belt to attract floating oil in the well. After picking up the oil, the belt travels over the head pulley on the drive unit and through tandem wiper blades. The oil is then scraped off both sides of the belt and discharged through a 1-1/4" ID hose.
The PetroXtractor can be installed in existing wells by mounting it on a flat surface above the well casing. Skimmer operation consists of merely lowering the belt and tail pulley into the casing until the pulley is fully immersed, placing the discharge hose in a container, and switching the unit on.
- Ideal for removal of floating oil and other hydrocarbon liquids from existing remediation or monitoring wells
- Elevates skimmed oil 100 feet or more for discharge into 55 gal drum
- Removes up to 12 gph of oil from water
|
|
|
|
|
|
The Tote-It's patented design is a dependable and effective means of removing oil from water. The single assembly unit can be used in any application where 115 VAC, 60 Hz power is available.
Oil skimming makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the belt to attract oil and other hydrocarbon liquids from the surface of the fluid.
The Tote-It is especially well suited for parts washing and machining center applications. By removing surface oil from a wash tank, the parts will not be recontaminated as they are withdrawn. Removing tramp oil from a coolant tank prevents excessive smoke and fumes due to oil burning during cutting operations. It also reduces bacteria growth in the tank, along with the resulting odor.
Features
- Most inexpensive way to remove oil from water
- Tote-It is easily hand carried to the source of the problem
- Saves coolants by removing tramp oil
- Conserves parts wash water and prevents recontamination of parts as they are removed from wash tank
- Prevents plugging of spray heads and filters
- Reduces fluid disposal costs andhelps meet government requirements for water discharge
- Skimmed oil can be recycled and reused as a lubricant or fuel
Advantages
- Multiple site usage easily moved from one place to another
- 36 lb., single unit portability
- A single unit elevates and separates oil
- Effective in turbulent fluids
- Can be used in tanks as shallow as a few inches
- Requires no tank modifications in most applications
- Maintains skimming efficiency in fluctuating fluid levels
- Easy mounting and fast cleaning, with minimal maintenance
|
|
|
|
|
|
The ideal solution to unwanted oil in coolants and parts washers therefore extending the life of cooling and wash water! The Abanaki Mighty Mini SST can remove 1 to 2 gallons of medium weight oil per hour (depending on belt selection). Its stainless steel construction enables it to operate in harsh chemicals and heat while its integrated timer lets it run only when needed. The Mighty Mini SST is designed to minimize water content in the disposed oil; however the optional Oil Concentrator® will further reduce the water content in the oil to less than 2%. This is a tremendous cost saving if the oil is to be recycled or disposed.
The Mighty Mini SST weighs in at only 8 pounds and the ease of installation make this skimmer the most versatile of our line. Use it here today and there tomorrow as it installs in just seconds.
Features
- Integrated 24 hour timer
- Fan cooled motor
- Belts available 1" and 2" wide; materials specifically selected for your application
- Both sides of belt are wiped for better efficiency
- Chip resistant, baked on, powder-coated base and housing
- Spring loaded stabilizer bar
- 3-foot clear discharge hose and clamp
- 8-foot grounded power cord w/plug
- Stainless steel construction
Advantages
- Smallest and lightest of the Abanaki skimmer line
- Easily hand carried to the source of the problem
- Removes oil at rates up to 2 gallons per hour
- Designed for tank depths from 6" to 24"
- Belt and tail pulley can fit through a 2" diameter bung hole
- Great for automotive and mobile equipment service shops
- VERY affordable even for small businesses
|
|
Mighty Disk™ Oil Skimmer
The inexpensive way to remove unwanted tramp oils from coolants and parts washers, but with all the quality that you expect from Abanaki! Effective. Removes up to 1 1/2 gallons of oil or more of medium weight oil per hour. Compact. Use it almost anywhere a flat surface is available for mounting. Portable. Weighs less than 10 pounds, installs in no time, and runs on 110v power. Complete. Put it to work right out of the box.
Standard Features:
- Available in 12" and 18" diameters
- 110v fan-cooled motor
- High temperature disk material
- Quality construction
Optional Features:
- SS construction with integrate 24 hour timer
|
|
LANNER® systems
Complete chip treatment systems, built according to your requirements. LANNER® customised systems are available as a complete solution. Our systems can process different types of chip, silt and metalworking fluids with maximum separation.
The LANNER®-Recycling-Concept
Complete solution system concept separating oil from metal chips and silt.
Chips are fed into the lift & tip machine from the chip transporter.
Chips are tipped into the chip crusher.
Chips are transported into the centrifuge on the conveyor belt.
Dry chips are ejected into containers or silos.
The entire system is controlled automatically from a central control box.
|
|
A LARGE RANGE OF FILTERS
METAL EDGE FILTERS OR BACK FLUSHING FILTERS FOR
ECONOMICAL FILTRATION
Variable configuration inline pressure filters which use modern technology and can be deaned during on-going operation, require no maintenance or disposal measures as opposed to consumable filter material.
They can be used in applications ranging from fine filtration to coarse filtration.
|
|
Cylone unit F60
Areas of application
Removing sedimenting solids from liquids of low viscosity such as water and emulsions. Installation as independent cleaning unit on fine machining machine tools.
Function
Due to tangential streaming-in of the liquid, a primary swirl develops. The heavier particles in the liquid, due to centrifugal force, are pressed to the wall of the cyclone housing. Due to the tapering of the conical cyclone housing, a secondary swirl develops in the lower area which leads the cleaned coolant lubricant back in opposite direction. The dirt particles, together with a small amount of liquid (approx. 1.5 l/min), are removed through the underflow nozzle. The admission pressure must be approx. 2 bar.
|
|
|
These systems offer excellent residual-oil ratios. The improved recycling rate helps protect the natural environment while enabling more economical usage of coolant. The 300P offers all the features of model 300 plus an integrated swarf-intake hopper and crusher. This well-integrated, labor-saving system handles continuous swarf-intake, crushing, and de-oiling. The 300PW has all the features of the 300P but offers a greater swarf-intake capacity.
|
|
|
The MASTER is a range of high head and high-efficiency gravity filters which use non-woven fabric filters. The MASTER range is able to treat between 200 and 1000 litres of neat oil per minute and from 400 to 2000 litres of water-based emulsions per minute containing both metallic and non-metallic particles. The entire filtration process is completely automatic.
|
|
|
This high-pressure coolant system, which helps break up and wash away the swarf, is an essential piece of peripheral equipment to support your operation. The C-type unit is equipped with a centrifugal separator that removes minute ferrous particles, including BsBM. The M-type is equipped with a magnetic separator that removes ferrous particles. The P-type unit is equipped with a paper-filter system that removes minute cast-iron particles. All of these significantly extend tool longevity.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category : 