|
|
Special fixtures for clamping of light alloy wheels performed with adjusting system for clamping of 6 different diameters 13"- 18"/15"-20"/18"-22,5
essential feature: wide clamping range from 15" up to 20"
Application fields
Aerospace, Aircraft, Commercial vehicles, Energy, Heavy duty machines, Naval, Oil, Wind generators
|
|
HMC Chucks feature the "Perma Fix" Roll Lock System, with its long fine slots of the internal bore, is an integral part of the entire body. This design assures ultra accuracy and rigidity. When tightening the nut, the needle roller bearings rise on the exterior taper of the chuck body and clamp evenly around the entire 360° tool perimeter. As a result, the greater the clamping pressure, the higher the concentricity.
Superior steel alloy allows tough hardening treatment for greater durability. The New Hi-Power Milling Chuck can be operated thousands of times before even the slightest wear will become apparent. The patented pin mechanism assures positive non-slip locking for large diameter 2" shank cutters under the heaviest cutting conditions.
|
|
- Provides 4-5 times the gripping force of a collet chuck
- Each taper is precision ground to a tolerance of AT3 or better!
- T.I.R. of only 0.0002" rivals shrink-fit
- Factory balanced to 10,000 RPM for high speed operation
- Constructed of special steel for maximum rigidity & finish
- All products are backed by our 100% satisfaction guarantee
Advantages:
- Provides excellent tool life and saves money by reducing tooling expenses
- Extreme holding power and rigidity for precise milling operations
- Excellent repeatability and low T.I.R. of 0.0002"
- Insert sleeves are available to fit different size tool shanks
- Fast and easy tool changes using conical screw mechanism
|
|
Chucking
Universal and milling chucks
- Expansion chucks
- End mill holders
- Face end mill arbors
- Combi-shell end mill arbors-NC
- Auto-lock chucks
|
|
| ... products without technical information |
| |
DATRON Mini-Tools
High Speed Cutting Tools
On the basis of our testings and the experiences of our customers we develop special tools for high-speed machining.
Efficiency and quality of CNC-Machining is exceedingly determined by the technological design and the quality of the CNC-Tools. As a result of our long-term experience DATRON is able to offer tool models in the range of Mini-Tools that provide a high-quality and remarkably faster machining than any other competitive product.
|
|
WhizIn, another revolutionizing patented product developed by WhizCut, is designed to improve productivity of internal applications. It has been specially developed for small diameters in internal turning applications, and is unlike anything else on the market.
The WhizIn tool holder has the carbide bar mounted at an angle to achieve the maximum stability for a set diameter. By grinding away less from the base of the insert, the insert becomes more stable. Other benefits are less grinding time and grinding stress and that the coolant may go through the tool holder and spray directly on to the cutting zone.
|
|
Steel Shank ~ Coolant Through
Carbide Shank ~ Coolant Through
Heavy Metal Shank ~ Coolant Through
Steel Shank ~ Carbide Reinforced Modular ~ No Coolant
Steel Shank ~ Square Shank Modular ~ No Coolant
|
|
| ... products without technical information |
| |
ProNC2 is the last generation of part programming and management created by VERNET BEHRINGER Company. It is developed for 32 bits environment like Microsoft„µ Windows„µ 9x, 2000 and Xp and uses SQL databases.
ProNc32 is used for manual programming through a column per face mode and a graphic mode. The Import/Export function with the most current format file (D.S.T.V, APROMAV.DAT, *.PNF, *.CAM,¡K) makes easier the data exchanges between computers which have a software enabled to read the same format file.
The configuration of the databases in Client/Server allows a full sharing of the data and a better production following.
Data contained in ProNC2 software is transmitted towards the PLC driving the machine trough the machine driver which has either a RS232 type PC Serial link, either a software link, makes it possible to visualize at all times the state of the machine using a default table, making maintenance more efficient.
|
|
|
|
|
|
PFAD Plus - the configuration program for three-phase drives with SIMOVERT MASTERDRIVES
The PFAD Plus configuration program permits swift selection of a complete drive package - consisting of three-phase motor, frequency converter, and other components such as line reactor, line filter, brake unit, etc. A menu-driven configuration with explanation of the inputs through an extensive help system makes handling easy and provides optimum results. Displaying various curves such as the motor limit curve together with the necessary motor torque values simplifies optimization and shows the reserves. Once a drive has been configured, the system perturbations can also be calculated. The beginner can call various typical configurations including the associated task definitions. Of course, PFAD Plus provides a comprehensive documentation that contains all input values, calculation results, curves, and a parts and ordering list. PFAD Plus is now available as Version V2.80 with an enhanced functionality.
NCSD configurator
You inform the configurator in an easy and convenient way of the requirements you are placing on SINUMERIK / SIMODRIVE systems and the conditions under which these are operated.
The configurator transforms these data and supplies you the complete control and drive configuration which has been customized to your applications.
In addition, we will inform you about the accessories to be used in order to ensure a safe connection between all components.
You can also output all configuration results on a printer.
By means of the configurator, it is also possible to configure either the SINUMERIK or the SIMODRIVE system alone.
|
|
| ... products without technical information |
| |
Electroerosion is a process of machining primarily used for the manufacture of moulds or matrices to the various forms and which consists in removing matter by the action of an energy dissipated between an electrode, having the opposite form, and the metal part machined. Two principal phases will be distinguished: "the outline" (or phase of driving) which results in a fast and important removal of the matter and the "completion" where, work, slower and more precis, conduit with obtaining suitable surface qualities.
The Process, opposite exposed, explains how are held the various phases of the operational cycle and emphasizes the importance of the stability and the Canal control of Ionization which conditions the quality of work obtained.
|
|
| ... products without technical information |
| |
|
The MASTER is a range of high head and high-efficiency gravity filters which use non-woven fabric filters. The MASTER range is able to treat between 200 and 1000 litres of neat oil per minute and from 400 to 2000 litres of water-based emulsions per minute containing both metallic and non-metallic particles. The entire filtration process is completely automatic.
|
|
|
This high-pressure coolant system, which helps break up and wash away the swarf, is an essential piece of peripheral equipment to support your operation. The C-type unit is equipped with a centrifugal separator that removes minute ferrous particles, including BsBM. The M-type is equipped with a magnetic separator that removes ferrous particles. The P-type unit is equipped with a paper-filter system that removes minute cast-iron particles. All of these significantly extend tool longevity.
|
|
| ... products without technical information |
| |
Rods and Hollow Rods
GEHR extrudes thermoplastic materials according to your individual needs in dimensions ranging from 1 mm – 700 mm diameter.
Materials
* PVC - U
* PVC - C
* PVC - HI
* PE - HD
* PE - UHMW
* PP
* PP + 30 % GF
* PS / SB
* ABS
* PVDF
* PC
* PMMA
* PET
* POM
* PEI
* PSU
* PEEK
|
|
Tubes
GEHR extrudes thermoplastic materials according to your individual needs.
More than 10.000 tools guarantee an excellent range of dimensions from 5 mm - 280 mm diameter. We can also produce different wall thicknesses and shapes such as multicolored stripes and marble effects. We have a tooling shop in our company as well.
Materials
* PVC - U
* PVC - C
* PVC - HI
* PE - HD
* PP
* PS / SB
* ABS
* PC
* PMMA
|
|
|
|
|
|
Flexure guided piezo stage positioners are used in a variety of applications from semiconductor manufacturing to precision machining.
PI introduced the first line of piezoelectric actuators more than 35 years ago. The technology's unique features such as: responsiveness; stiffness; life time and infinite resolution, have opened many markets since then, from semiconductor testing to precision machining. Typical piezo tools for precision machining are equipped with special waterproof casings which also provide the mechanical interface to the tooling machine and the tool servo.
Integrated metrology systems feature resolution in the nanometer and sub-nanometer range for closed-loop operation with digital or analog motion controllers. Flexure guiding mechanisms and motion amplifiers provide long traveling ranges and protect the piezo ceramics from off-axis forces.
PI piezo actuator systems are used throughout the world, often in applications that run 24 hours a day, seven days a week. They improve the manufacturing precision of optics, crank shafts, bearings, cylinders, pistons, etc. in crucial processes such as diamond turning, milling, grinding, out-of-round boring or wear-compensation of tools.
Custom-manufactured high-performace piezoceramic actuators provide lifetimes of billions of cycles. Power amplifiers with energy recovery and 2000 W peak power are available for high-dynamics applications.
|
|
|
|
|
|
piezosystem jen's new nano-positioning stages of the series nanoX work in a bidirectional active manner. Hence, these elements are well equipped for fast dynamic applications combined with an excellent guiding accuracy even at high mass loads.
What does this mean? Due to the inability of the smca (stacked multilayer ceramic actuator) to generate pull forces, state-of-the-art piezoelectric driven nanopositioning actuators show different kinds of behavior depending on the sense of direction of their stroke. Hence, the resulting forces in the push direction are determined by the high force generation of the actively controlled scma. The pull force is determined by the weak spring reset force of the passive acting flexure hinges. Both result in a push/pull-force ratio of up to 10. The dynamical performance, load capacity and robustness of the whole nanopositioning assembly are limited by the behavior of the weaker sense of direction.
Psj's new sophisticated gear design operates in a bidirectional active manner which reduces the push/pull-force ratio to up to approx. 1:1 (without affecting the trajectory). Both stroke vectors of the nanopositioning stage are controlled by the high pressure force generation of the smca's.
This mechanical design features:
the most efficient way to change the smca forces into translation power
an outstanding damping ability of actively controlled acceleration and deceleration
high inertial preload; a high degree of mechanical resistance against shocking overloads
minimized failure rate caused by the absence of destructive pull forces acting on the smca
excellent temperature compensation
|
|
Advanced materials-technologies
Carbone Lorraine's Advanced Materials and Technologies division designs advanced technology solutions based on graphite and other materials for highly demanding industrial environments: industrial processes at high temperatures, high-energy braking and anticorrosion equipment for the chemicals and pharmaceutical industries.
The Group is innovating in order to respond as effectively as it can to its customers' needs. Its uncontested expertise and know-how have enabled Carbone Lorraine to establish itself as world leader in graphite anticorrosion equipment and world number two in high-temperature applications of isostatic graphite.
GRAPHITE'S PROPERTIES
Graphite offers optimum resistance to very high temperatures and highly corrosive environments.
Heat losses are controlled and thermal conduction optimized.
Graphite is a self-lubricant and can be machined easily.
|
|
| ... products without technical information |
| |
|
With especially performing and precise laser robots REIS ROBOTICS opens up the market for laser material processing. Technology and concept of the robot now ensure the use of CO2-lasers, Nd:YAG or kiode lasers. As leading system bidder for laser robots with integrated beam guidance REIS ROBOTICS delivers complete processing cells designed for the corresponding application task.
|
|
|
|
|
|
StarShape
The new StarShape series from Rofin/Baasel Lasertech provides a large number of different lasers for micro-material processing. All StarShape series applications have one thing in common: the precise, local, selective ablation of areas of the surface of a component or tool by vaporization or vaporization-induced displacement of the molten mass.
The lasers in the series can be used to structure surfaces, drill through-going or blind holes, or remove selected layers of substrates precisely to the micrometer. The materials that can be processed range from metals through ceramics and diamonds to plastics.
To cover most of ablating micro-material processing, the StarShape series includes both Nd:YAG lasers in cw or Q-switched versions, and CO2 lasers. The available wavelengths thus range from green to within the infra-red end of the spectrum. Interaction times from the few nanoseconds of end-pumped solid state lasers up to the continuous-wave range, offer suitable laser solutions for all of the above-mentioned applications.
|
|
|
|
|
|
StarShape
The new StarShape series from Rofin/Baasel Lasertech provides a large number of different lasers for micro-material processing. All StarShape series applications have one thing in common: the precise, local, selective ablation of areas of the surface of a component or tool by vaporization or vaporization-induced displacement of the molten mass.
The lasers in the series can be used to structure surfaces, drill through-going or blind holes, or remove selected layers of substrates precisely to the micrometer. The materials that can be processed range from metals through ceramics and diamonds to plastics.
To cover most of ablating micro-material processing, the StarShape series includes both Nd:YAG lasers in cw or Q-switched versions, and CO2 lasers. The available wavelengths thus range from green to within the infra-red end of the spectrum. Interaction times from the few nanoseconds of end-pumped solid state lasers up to the continuous-wave range, offer suitable laser solutions for all of the above-mentioned applications.
|
|
|
|
see the results for the following category : 
